350 series mud pump brands

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.

Our RL3NB series triplex single-action reciprocating mud pump is designed with longer stroke allowing the pump to work at a lower stroke rate. The optimized design helps to improve the suction performance of our products and extend the service life of the expendable parts. Triplex mud pumps of the RL3NB series are produced and tested strictly in accordance with the SY5138 standard formulated by Ministry of Petroleum Industry of China.

These slurry pumps can be used for well drilling, well repair, long-distance liquid transportation, polymer filling and water injection in oil fields or other industrial and mining enterprises.

RL3NB series triplex mud pump is mainly composed of the power end and the fluid end. The power end contains components like the base, the housing, main driving shaft, crank shaft, gear pair and connection rod crosshead. The fluid end is made up of parts including high pressure valve box, discharge manifold assembly and suction manifold assembly.

3NB series mud pumps are manufactured according to SY5138 standard (China Petroleum Industrial Ministry Standard). This series mud pumps are widely used in oilfields and other industrial mining enterprises for well drilling and well repairing in China. Its price is much more competitive comparing to EMSCO F series drilling pump.

Browse through more than 1,500 duplex piston rods and 200 duplex pony rods in our inventory. EC Tool gives you a quote before your order, so you know what you’re getting for your money every time. While we primarily keep connecting rods for GA550 and GA750 models in stock, there are other options at your disposal as well. This includes custom connecting rods for most duplex and triplex mud pumps.

We now offer new crossheads and capsules for both EMSCO D-375 and DB-550 duplex pumps. You can also find slides and shoes for certain models. Available parts currently in our inventory include:

We mainly manufacturer Emsco F-500, F-800, F-1000, F-1300, F-1600,Gardner Denver PZ-9 and National 12-P-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us.

Product Instruction：we devoted to professionally manufacure and sales the mud pump in global,the quality and your satisfication are always being our achievement,we would,t say we are the best choice for u,but our product will tell u.+MORE

Product Instruction：This series mud pumps are strictly manufactured according to SY5138 standard of CNPC and are tested accordingly when leave factory.

Product Instruction：series mud pups are compatible and interchangeable with most of the F series mud pumps of other made like FB series (EMSCO, BOMCO and LSNOW), HHF/3NB-Fseries (Honghua), RSF (Huabei Rongsheng) RL-F series (Shandong Rongli), F series (Shandong Kerui), TFI F series (Texas First Industry),TSC, etc+MORE

Product Instruction：F-800light weight drilling pumpis designed for special drilling/workover application where equipment weight and dimension should be weill limited like drilling rig working onboard offshore platform,barge,drilling rig working in wetland,jungles and so on.it certainl can also work for conventional drillingrigs.+MORE

The X-series mud pump type PD X-3.004 SG HDD manufactured by PRIME DRILLING impresses with its robust and low-wear design. The 7-fold bearing mounted drive shaft, which is equipped with 3 eccentric wheels, replaces the conventional crankshaft. Due to the revolution of these shafts and their maximum 230 rotations per minute operational wear of rubbers and liners are reduced to a minimum.

The pump is driven by a 470 kW CAT engine. This type of mud pump is exclusively manufactured in our Wenden plant, i.e. „made in Germany“. Its electronic gearshift in combination with eccentric wheels used instead of a crankshaft make it a high- power but low- maintenance product. All valves and plungers also comply with API standards.

Rundong offers a wide range of drilling mud pumps. The 3NB series mud pump is typically used in oilfield and industrial and mineral enterprises. It is also suitable for drilling, well workover and long distance transportation of liquid media.

The 3NB series mud pump is designed to have optimized parameters, providing increased stroke and capacity. We reduce the stroke rate reasonably to improve suction capability and extend service life of wearing parts. The followings are our 3NB series drilling mud pumps with different parameters.

Rundong is a professional drilling rig mud pump manufacturer. We also provide mud pump parts such as valve, liner, piston assembly and so on. These products are of reliable quality and low prices so that we have established stable long-term cooperation relationship with clients in the United States, Russia, Kazakhstan, and more. We have large manufacturing equipment and easy to purchase materials, we also offer OEM service to customers! If you want know more information about our products, please feel free to contact us!

The P series mud pumps are featured by its compact structure, small weight, and land use and high efficiency and can be equipped with drilling rigs according to the requirements and site conditions.

The P series mud pumps are durable and compact and can ensure stable operation. During shallow and middle to deep drilling, the P series mud pumps can meet the special requirements of users.

The durable fluid end of P series mud pumps significantly increases the performance of three-cylinder mud pumps. In addition, the independent structure is easy to inspect and maintain.

The base of the machine frame adopts one-piece welded structure and the seats of the main bearing and transmission bearing are made of one-piece cast steel. The whole pump has good stiffness and strength.

The extension rods are connected to the crossheads by pinholes, so as to ensure the concentricity of the pump. The packing adopts quad-layer sealing structure, which realizes good seal performance.

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

Tulsa Triplex is a Tulsa Rig Iron company. We manufacture pumps from 100 to 600 horsepower for drilling, reverse circulation, hydrostatic testing, water blast, and workover applications. Utilizing roller bearings throughout, our pumps are built to last. They are designed to be easily maintained and are capable of being completely rebuilt. Available as bare pump only, with chainbox, or complete pump packages.Our skids are built tough as an oilfield type with draw bars.