4 hose for mud pump factory

High-pressure mud hose also called rotary hose, vibrator hose or jumper hose, is used to convey drilling fluid from mud pump to the mud standpipe manifold on the drill floor. It is available in bore sizes from 2" to 6" and up to 120 ft. length. To meet different requirements on the market, API end fittings such NPT thread and flange and other specified fittings are supplied.

Mud delivery hoses are lined with specially compounded synthetic rubber tube and cover. They have excellent resistance against abrasion and corrosion from oils.

505 mud pump hose products are offered for sale by suppliers on Alibaba.comAbout 51% % of these are rubber hoses, 19%% are pumps, and 1%% are mud pump.

A wide variety of mud pump hose options are available to you, such as 1 year, not available and 2 years.You can also choose from new, mud pump hose,as well as from energy & mining, construction works , and machinery repair shops mud pump hose,and whether mud pump hose is 1.5 years, or unavailable.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Series 7309 is a heavy duty, high pressure discharge hose designed to handle drilling mud, mild chemicals, petroleum waste and water. The hose construction incorporates a heavy wall for durability and a static wire as a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, heat, mild chemicals and weathering. Series 7309 is available in 200-foot continuous lengths.

Parker"s Series TKW160 Large Diameter Custom Made Heavy Duty Oilfield Mud Suction Hose provides excellent heavy duty service across multiple oilfield bulk transfer applications. The thick rubber tube provides additional resistance to abrasives, drilling mud and other typical oilfield materials going through the hose and the cover provides resistance to abrasion and weathering for maximum versatility and performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.

• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.

Heavy wall thickness reinforced with multiple woven textile plies and static wire is used by HIC Universal in manufacturing drilling rotary hose pipe product, fully tested as per IS and international standards that covers full testing in well-equipped HIC’s Testing Laboratory and stamped with identification coding.

Warranty: Manufacturer warrantees mud pump hoses to be free from manufacturing defects and shall replace or repair if found defective in workmanship within 1 year from the date of shipment.

Roll Lengths manufactured are 3 meters Min. (= 9.85 feet Approx.) and 20 m Max up to 5inch Inner Diameter size hose. Above 125mm (=5”) NB, Max. Length produced is 10 meters.

Series TKW160 is a large diameter suction and discharge hose designed to handle drilling mud, mild chemicals, oily water, petroleum waste and sewage in oil field applications such as a flexible, vibration-dampening connection between the slush pump and mud pit during rotary well drilling. The hose construction incorporates a wire helix that provides full suction capability, kink resistance, and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, oil and weathering.

Hoses have a higher working pressure than normally available chemical hoses. CPE handles a wide variety of acids, alcohols, salt solutions, and petroleum based products.

Lightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination. UHMW handles a wider variety of chemicals than XLPE at virtually the same cost.

Designed to convey hot non-oily air from blower or compressor to storage tank in the transfer of dry bulk materials. Can also be used for transferring mild chemicals at ambient temperatures.

Designed for applications that required the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.

Lightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.

Economical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibility and abrasion resistance while the smooth interior provides maximum flow.

Designed for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Mud discharge hose designed for petroleum waste, drilling mud, diesel, and water. The standard to transfer liquid mud at high pressures from the mud pump.

Designed for discharge of potable water or liquids not containing oils or chemicals from a supply ship to an offshore drilling rig or temporary water lines in construction or industrial applications. Tube meets FDA requirements.

Designed for sand, steel, shot, or other sharp abrasives to handle cleaning, cutting, or finishing stone, glass, or metal surfaces. Static conductive tube prevents the build up of electrical charges.

Designed for use with push-on fittings for air tools, petroleum products, gasoline, mild chemicals or water. No clamps or special tools required. Hose reinforcement laid at the most effective angle for maximum strength and coupling holding ability.

Designed for transfer liquid propane gas or butane. Can also transfer natural gas in open, well vented areas at 1 PSI max. UL21 LP Gas/Natural Gas approved. NOT for compressed natural gas.

For gravity of electric pumps dispensing of oils, gasoline, diesel, and petroleum products. Typically used with farm or barrel-type pumps where UL approval is not required. Has static wire, designed for use with electric pumps. NOT for gas station use. Only UL 330 listed hose used for gas station use. NOT for aircraft fueling.

Wire braid steam hose for saturated and superheated steam up to 250 PSI 450° F. Cover is pin pricked to allow venting to eliminate blistering and cover separation. Steel wire braids can be utilized as a static wire to make the hose assembly electrically conductive. NOT for use with detergents. DRAIN AFTER USE!

Designed for portable or production line welding in factories, ships, construction, etc. Meets RMA and CGA (Compressed Gas Association) specifications for Type VD.

Spray lawns, trees, and similar applications with diluted solutions of water and oil based pesticides and herbicides. Can also handle compressed air. Spray hose for fertilizers, herbicides, and insecticides in the agriculture and lawn care industries. Can also handle water and compressed air.

General purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications. PVC hoses resistant to oils, grease.

Designed to handle edible liquids, vegetable oils, salad dressings, vinegar, mustard and meat products requiring a sanitary hose which will not impair taste. Great for service with hot oil fat filters and fryers.

Designed for food and beverage dispensing, potable water, air breathing lines, packaging and equipment, lube lines, and other visual flow applications.

For suction/discharge use and allows visual flow inspection. Designed for industrial vacuum pumps, food and beverage dispensing, air and water supply, car wash, coolant lines, and deionized water systems. Meets FDA, USDA, and 3A standards.

Clear polyvinyl chloride tubing provides fullview of flowing product. PVC is good to excellent for acids, fair to excellent for alkalies, and excellent for most solvents. NOT for ketones, esters, and some aromatic hydrocarbons. Used for general use, sight gauges on storage tanks, air conditioning drainage, refrigeration drainage, air line, and printing press equipment.

Linear low density polythylene food grade tubing for standard industrial applications such as the transfer of air and liquids, water lines, water softener lines, pneumatic logic control lines, and vending equipment. Excellent resistance to solvents and stress cracking.

Designed for open end discharge applications. Uses include connections to fire hydrants, dust control water trucks, water spraying, and water discharge. Immune to mildew.

Preconnected to pump of an engine (and the booster tank) for putting out small fires near the tank without having to connect to a fire hydrant (brush pumper).

Designed as a hydraulic brake hose for vehicles and motorcycles. The average life of a brake hose is six years. Brake hoses swell with age and restrict flow. Generally all brake hoses on a vehicle deteriorate at the same rate. All assemblies pressure tested to 3,000 psi.

Air Brake Tubing, Steel Brake Line Tubing Assemblies, Steel Brake Line Tubing Coils, Rubber Air Brake Hose, Silicone Coolant Hose, Silicone Heater Hose, GPR Radiator Hose, Rubber Heater Hose, Garage Exhaust Hose, Air Conditioning Hose

Camlocks, Petroleum Handling, Industrial and Oilfield Hose Ends, External Swage Hose Ends (Holedale), Crowsfeet Couplings, Sand Blast Couplings, Ground Joint Couplings, Bauer Style Quick Connects, Ringlock Fittings, Storz, Foot Valves and Strainers, Airline Accessories, Industrial Accessories, Clamps, Pressure Washer, Safety and Protection Products

Light weight and flexible for easier handling. Flexibility retained at low, even cryogenic temperatures (below -238° F). Excellent resistance to kinking or crushing. Suction and Discharge use. Up to 100% aromatics, no permeation of gases. All assemblies tested to 1.5 x working pressure. Not for dry material service.

Air conditioning, ambient air movement, dehumidification, heating, sewn construction, and insulated and non-insulated available. Excellent UV compensation with mold and mildew inhibitors for demanding outdoor conditions. Flame resistant in accordance with UL94VTM-O, California Fire Marshal, and NFPA701 Method 2 specifications.

Available in sizes 1/4″-12″. Operates in high/low temperatures. Fire safety up to 1200° F. No permeation of gases. Full vacuum. Annular is hydroformed, a process that enhances flexibility and extends the life of the hose. Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum.

Unions conform to NACE, ISO, DNV, and API standards and are interchangeable with other brand name manufacturers adhering to industry standards. Materials conform to ASTM A105N Forged Carbon Steel, AISI 4130, and AISI4140. NPT threads conform to ASME B1.20.1. Figures 206, 207, G, 1002, and 1003 have O-Rings.

Plug Valves, Swivel Joints, J-55 and N-80 Pup Joints, Integral Fittings, Steel Hose Loops, Crossover Adapters and Swages, Blast Joints, Manifolds, Bull Plugs and Caps

Schedule 40 Pipe Fittings, Schedule 80 Pipe Fittings, Merchant Steel Pipe Fittings, XXH Nipples and Schedule 60 Nipples, Forged Steel, Stainless 304/316 Schedule 40, Grooved Nipples, Fittings, and Couplings, Swage Nipples, Oil Country Swage Nipples, Bull Plugs, Oil Country Bull Plugs, Merchant API Couplings, Bolted Sleeve Couplings, ANSI Flanges, API Flanges, Orifice Plates, AWA Plate Flanges, Shedule 40 and Schedule 80 Butt Weld Fittings

37° JIC, Pipe, Pipe Swivel, O-Ring Kits, O-Ring, Split Flange, Face Seal, Hose Barb, Flareless Bite Type, Metric, BSPP, BSPT, Inline Live Swivel, 90° Live Swivels, 90° Dual Plane Live Swivels, Test Points, Thread ID Kits

Inverted Flare, SAE 45° Flare, Compression, Self Aligned, Polyline Flareless, Push-Connect, Push-Connect Air Brake, Compression for DOT, Compression for Air Brake Copper Tubing, Threaded Sleeve, Pipe Fittings, Needle Valves, Drain Cocks, Truck Valves, Ground Plugs, Multiple Shut-Offs, Hose Barbs, Push-On Hose Barbs, Garden Hose Fittings

Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.