ace mud pump service manufacturer

Ace Pump Corporation has provided pumping solutions for the chemical application, off-highway equipment, air conditioning, and refrigeration markets since 1945. These varied applications have required Ace to successfully overcome a wide range of engineering challenges.

Ace developed a complete range of products for the agricultural and off-highway equipment markets that do not require the electrical grid for operation. The pumps are found serving a variety of functions in industry today including: crop sprayers, concrete trucks, asphalt milling machines, anti-icing trucks, turf sprayers, and more.

Our years of engineering experience with cutting edge development processes make Ace your best choice for custom product development. Our product design employs the latest in 3-D modeling and rapid prototyping tools, which insure design accuracy and efficiency and minimize lead times. Tell us your needs and we can design a custom pump solution to meet them.

There have been considerable technological advances since Ace was founded in 1945, but we made sure not to change the best things. We started with a dedication to customer service and we maintain that focus today. No matter how "big" we"ve gotten, we have never let go of that "small company idea" of listening to customers and providing better answers to their needs. Our management, and our hands-on expertise, remain accessible for you.

Ace Pump Inc. proudly machines its own designed and tested products in all of our equipment and pumps. Our warehouse located in Bakersfield, CA has over 15,000 sq ft of parts to service all of your product needs. Engineering, we work with our customers to provide the highest efficiency in extraction, and are familiar with all types of down hole situations.

Ace Mud Pump Service is mainly involved in Septic Tanks/Systems - Cleaning/Repairing. Ace Mud Pump Service operates in San Antonio Texas. This establishment is involved in Septic Tanks/Systems - Cleaning/Repairing as well as other possible related aspects and functions of Septic Tanks/Systems - Cleaning/Repairing. In San Antonio Texas 78264 Ace Mud Pump Service maintains its local business operations and may carry out other local business operations outside of San Antonio Texas in additional functions related to Septic Tanks/Systems - Cleaning/Repairing.

YP - The Real Yellow PagesSM - helps you find the right local businesses to meet your specific needs. Search results are sorted by a combination of factors to give you a set of choices in response to your search criteria. These factors are similar to those you might use to determine which business to select from a local Yellow Pages directory, including proximity to where you are searching, expertise in the specific services or products you need, and comprehensive business information to help evaluate a business"s suitability for you. “Preferred” listings, or those with featured website buttons, indicate YP advertisers who directly provide information about their businesses to help consumers make more informed buying decisions. YP advertisers receive higher placement in the default ordering of search results and may appear in sponsored listings on the top, side, or bottom of the search results page.

We offer maintenance contracts, upgrades and commissioning services for our clients requiring the overhaul, strip down, assembly and testing of existing winching equipment and deck machinery, whether originally supplied by ACE Winches or a third-party.

We are an original equipment manufacturer, and global support is available 24/7 through our teams of qualified technicians. Master Service Agreements and packages are available to our clients owning and operating ACE equipment and/or third-party equipment.

All equipment is subject to comprehensive testing prior to delivery. Our services also incorporate a product sourcing facility to supply third party products including wire ropes, hydraulic and electric components, and spare parts.

Optimizing production under dynamic well conditions requires flexible and adaptive electrical submersible pumping (ESP) solutions. ESP pumps from Baker Hughes incorporate innovative hydraulic designs to expand the application range of your ESP systems.

Our flexible pumps have the broadest operating range in the industry to deliver unsurpassed levels of efficiency, reliability, and speed to your production operations. You get customized pumping solutions to improve your operating economics, regardless of your field application.

ACE supplied motors along with the complete electrical installation, LED rig light package and controls for a mechanical tele-double rig. The controls consisted of Cummins generator sync panels, VFD packages for the mud pump rad fans, ABB soft-starts for 2 x 400HP top drive HPU pumps.

ACE supplied motors along with the complete electrical installation, LED rig light package and controls for a mechanical tele-double walking rig. The controls consisted of Cummins generator sync panels, VFD packages for the mud pump rad fans, ABB soft-starts for 2 x 400HP top drive HPU pumps. We added electrical controls at the drillers console for the mud pumps and an Omron touch screen to monitor various rig parameters. Additional considerations were required to extend control signals through a cable curtain, which could extend the cables up to 300 feet. ACE also included a wireless remote to control the PLC synchronized walking feature of the rig, and automatic VFD pump controls to regulate tank levels on a scalping tank.

The rangeland SRR-150 is a push pull well service rig, specifically designed for pad style well service. The rig uses a 600HP diesel over hydraulic system to drive most rig functions; they are controlled by an Omron PLC system and multiple Omron touch screens. The rig incorporates a fully automated pipe handling system from the ground to derrick.

This machine will slot pipe to desired widths, lengths and density and place them exactly on tubular’s both radially and axially. This system uses a combination of an Omron PLC and touch screen, as well as hydraulic servo actuators and electric servo motors to obtain the required precise cutting depth and pipe indexing. The machine is capable of slotting pipe lengths up to 46 feet at one time while maintaining extremely tight tolerances on the ID and OD of the finished slots. Common applications for the straight cut slotted pipe are for Cold Production and CBM horizontal wells in addition to SAGD injector wells.

ACE retrofitted an existing SCR rig, removing the original 5×20-conductor cables from the SCR house to the rig floor. We added Allen Bradley Control Logix PLC’s at the drillers console and SCR house with a communication cable to replace the original 5×20-conductor cables. The system is setup with a back-up 20 conductor cable to run the drawworks and a mud pump in case the PLC network went down.

ACE custom built cabinetry to house a 4 x ACS800-04M ABB drive system. The cabinetry consists of 7 sections, plugboard, breaker section, control section, and 4 individual inverter sections. The design had to work around certain height restrictions and additional cooling and ventilation considerations.

ACE specified and supplied a braking resistor and chopper solution for an existing rig. The original equipment was prone to failure and a more reliable solution was required. We worked around multiple issues including the logistics of a field installation, space restrictions for the larger braking resistor and integrating the system with a 3rd party control system.

ACE designed a sophisticated control system that allows for 5 separate centrifuge configurations and is user configurable to run 2 centrifuges simultaneously. This means that 5 separate centrifuge/motor configurations can be saved in the system and centrifuges can be interchanged without any hardware changes. The controls consist of a Siemens touch screen and S7 PLC, all the controls for the centrifuges and flocculation tank are via the touch screen.

Customer Pickup Orders: to help reduce exposure for our customers and our employees, if you are placing an order for in-store pickup please call in your order ahead of time or place your order online and pre-pay with a credit card. Be sure to let us know when you plan to arrive. We will have your merchandise ready for you and will greet you outside our facility. Thank you for your help!

Since 1983, Centerline Manufacturing has been involved in the design, manufacture, and production of drilling equipment, support equipment, and tooling for the water well industry. When you need a mud pump built with a “get the job done attitude”, consider Centerline Manufacturing’s line of hydraulic mud pumps.Through expert design and acute attention to detail, Centerline Manufacturing’s aim is to maintain top of the line mud pumps, which perform beyond the highest expectation of the customer.

The pump bodies on our production models are made of a heat treated, high alloy, cast aluminum, with strength greater than cast iron. All of our machining is done in-house by CNC machines. The machined castings are hard anodized inside and out, to a hardness near that of a diamond. This protection creates an abrasion and corrosion resistant pump, that will provide for many years of service and reliability. The hydraulic drive cylinders are engineered for a continuous, high pressure, reciprocating duty, in any harsh environment. Our hydraulic shifting valves are cast of a material that has four times the wear resistance of standard hydraulic valve castings. We manufacture, distribute, and support this line of pumps, in such a manner as to make our pump the standard installation piston mud pump of our industry.

What makes our mud pumps different? All of our weight and size savings mean nothing if our pumps don"t deliver long term, day in and day out, trouble-free drilling service. We are committed to manufacturing a pump that drill rig manufacturers and drilling contractors recognize as top quality in every way. We are constantly designing new products, in order to provide the the drilling industry with innovative, high performing standards and products.

Over the century, Cameron Iron Works was renamed Cameron International and went on to design, manufacture, and service the most comprehensive and reliable portfolio of pressure control equipment in the industry.

We also served as the acting shop and field repair representative for the Western Gear Company and as a manufacturing facility for Wilson Manufacturing Company based in Wichita Falls, Texas. Wilson was a manufacturer of well service rigs and mud pumps. SMC Inc. has served and currently serves as a manufacturing and repair center for Oil Well Supply, Cabot-Franks, National, Halliburton, The Western Company, B.J. Hughes, Gardner Denver and many others. We manufacture a triplex pump of 165 H.P. with parts interchangeable to the Gardner Denver model TEE and are currently developing a 500 H.P. pump with parts interchangeable to Oilwell"s SA-644-5 pump. SMC has a large warehouse full of quality replacement parts for various types of equipment such as Triplex Plunger Pumps, Mud Pumps, Swivels, Drawworks and Rotaries.

We manufacture positive displacement pumps and replacement parts vital to the oil industry worldwide. We have customers that include both domestic and foreign oil companies. We also manufacture and repair a variety of products used in routine maintenance by customers with rock crushers, aggregate and commercial cement manufacturing plants.

180 mud pump clamp products are offered for sale by suppliers on Alibaba.comAbout 27% % of these are mud pump, 19%% are pumps, and 6%% are mining machine parts.

A wide variety of mud pump clamp options are available to you, such as 1 year, not available and 2 years.You can also choose from new, used mud pump clamp,as well as from energy & mining, construction works , and machinery repair shops mud pump clamp, and whether mud pump clamp is 1.5 years, 6 months, or unavailable.