auger mud pump manufacturer

American Augers mud pumps are standardstand-alone, self-powered machines thatare the perfect accessories to use with mudmotors, large reamers or whenever moremud volume is needed down hole.* Optional Quiet Pak for optimum noise reduction controlP-600 and P-750 Mud Pumps• allow the operator to get enoughflow to keep the bore flushed cleanof cuttings• are designed with a compact skidmounting and provide a smallfootprint that are ideal for mostdrilling environments.• are compatible with any drill brandmaking them suitable for contractorsoperating a variety of sizes, makesand models of drilling equipment.www.AmericanAugers.com

P-600Mud PumpTypical Flow Rates for Popular Size Mud MotorsBe sure to allow enough extra mud flow to flood the boreMUD MOTOR SIZEFLOW RATE/MINUTEInches Millimeters U.S. Gallons Liters3 3/8 85.72 30 - 120 113.6 - 454.23 1/2 88.9 75 - 160 283.9 - 605.74 3/4 120.6 100 - 250 378.5 - 946.46 3/4 171.4 300 - 600 1,136 - 2,271

What Type of Contractor Should Use aMud Pump?• Users of drilling equipment withpumping capacities of 25 U.S.Gallons (95 L)/minute or largerregardless of soil type or conditions.• Drillers typically making bores thatare greater than 6 1/2 in. (165 mm)diameter and more than 200 ft.(61 m) long.• Owners of mud motors for rockdrilling applications.• Operators in areas where muddisposal is expensive or restricted.Both the P-600 and the P-750should be considered when workingin rock formations where the operatingdrill"s on-board mud pump has fluidlimitedcapacities and cannot produceenough pressure to drive the mud motor.www.AmericanAugers.com

MUD MOTOR SIZEP-750Mud PumpTypical Flow Rates for Popular Size Mud MotorsBe sure to allow enough extra mud flow to flood the boreFLOW RATE/MINUTEInches Millimeters U.S. Gallons Liters3 3/8 85.72 30 - 120 113.6 - 454.23 1/2 88.9 75 - 160 283.9 - 605.74 3/4 120.6 100 - 250 378.5 - 946.46 3/4 171.4 300 - 600 1,136 - 2,2718 203.2 400 - 900 1,514 - 3,407

P-600PERFORMANCE SPECIFICATIONSPower TrainEngine:Caterpillar ® C-15 Tier III Diesel* Tier III or Tier 4i determined by country of purchaseFuel Capacity: 300 U.S. Gallons (1,136 L)Rating:475 HP (354 kW)Transmission: Eaton-FRO-16210B, 10 speedMaximum Speed: 2100 RPMClutch:15 1 /2 in. (394 mm) twin diskNoise Rating: 1 meter distance 104 dB(A)3 meter distance 95 dB(A)Battery:(2) Deka 908DMF 12V, 1450 CCAPumpPump Design:Maximum Pressure:Rated Capacity:Bore x Stroke:Tri-Plex 600GPM1,505 psi (104 bar)600 U.S. Gallons* (2,067 L)/minute6 x 6 in. (152.4 x 152.4 mm)* Note: Pump capacity will vary depending on the overall mud weight,drilling fluid mixture/content and working elevationControlsRemote Controls:Instruments:Mud pump throttle, Mud pump start/stop,clutch actuator, horn remoteDigital mud flow meter (gallons/liters per minute)DimensionsLength: 20 ft. (6.096 m)Height: 9 ft. (2.7 m)Width: 8 ft. (2.49 m)WeightTotal Weight:29,800 lbs. (13,520 kg) estimated39,600 lbs. (17,962 kg) with sound enclosureAccessoriesPulsation dampener on inlet and discharge(2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm)kamlock fittings(2) 25 ft. (7.6 m) discharge hoses with 3 in. (76.2 mm)NPT hammer unionsLiner wash system with supply tank(2) 24 volt work lights* Note: All product performance specifications,components, weights, dimensions and otherrelated information is subject to change withoutnotice from the manufacturer.

P-750PERFORMANCE SPECIFICATIONSPower TrainEngine:Caterpillar ® C-18 Tier III Diesel* Tier III or Tier 4i determined by country of purchaseFuel Capacity: 300 U.S. Gallons (1,136 L)Rating:600 HP (447 kW)Transmission: Eaton-RTLO-22918B, 10 speedMaximum Speed: 2100 RPMClutch:15 1 /2 in. (394 mm) twin diskNoise Rating: 1 meter distance 104 dB(A)3 meter distance 95 dB(A)Battery:(2) Deka 908DMF 12V, 1450 CCAPumpPump Design:Maximum Pressure:Rated Capacity:Bore x Stroke:Quintiplex, piston and liner1,500 psi (103 bar)750 U.S. Gallons* (2,839 L)/minute5 1 /2 x 7 7 /8 in. (139.7 x 200 mm)* Note: Pump capacity will vary depending on the overall mud weight,drilling fluid mixture/content and working elevationControlsRemote Controls:Instruments:Mud pump throttle, Mud pump start/stop,clutch actuator, horn remoteDigital mud flow meter (gallons/liters per minute)DimensionsLength: 25 ft. 6 in. (7.8 m)Height: 10 ft. 3 in. (3.12 m)Width: 8 ft. (2.49 m)WeightTotal Weight:47,800 lbs. (21,680 kg)AccessoriesPulsation dampener on inlet and discharge(2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm)kamlock fittings4 in. (102 mm) NPT hammer union discharge connectionLiner wash system with supply tank(2) 24 volt work lights* Note: All product performance specifications,components, weights, dimensions and otherrelated information is subject to change withoutnotice from the manufacturer.

AMERICAN AUGERSThe American Augers line of underground construction equipment is second-to-none.• Auger Boring Machines• Maxi-Rig & Mid-Size Directional Drills• Oil & Gas Drilling Rigs• Mud Pump & Cleaning Systems• Product Tooling & AccessoriesAmerican Augers products are manufactured at the company’s 241,000 square-foot facility in West Salem, Ohio,in the heart of Amish country between Columbus and Cleveland.Since the founding of American Augers in 1970, there has never been a change in the company’s core value:having products developed by a can-do work force that focuses on mechanical, technological and customer-baseddesign improvements. Our goal is to always exceed customer expectations by providing products that are not acost of doing business, but an Investment in Success.Did You Know? American Augers was the first HDD manufacturer to eliminate chain and utilize a rack andpinion carriage design which is now the industry standard. Our rack and pinion drive provides smoother carriagemovement, more precise operating control, long system life and no complicated parts.American Augers machines are supported through a dedicated parts and technical service department. We are hereto help whenever you need us 24 hours a day, 7 days a week, emergency or not.www.AmericanAugers.comEnvironmental CommitmentAmerican Augers is committed to manufacturing equipment that helps to preserve the sanctity of the globalenvironment, and has done so by reducing noise and/or emissions outputs, and emphasizing the fact that ourtrenchless technology equipment requires little or no open cutting, which has very minimal impacts on naturalsurfaces, features, or habitats.1212

Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of a directional drill.

Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of the directional drill.

The Stony Soil Auger is used for soils with a large gravel content. The stony soil auger body consists of a heavy steel strip, vaulted all along, which is bent double by forging. The pointed cutting...

AMS Regular Augers are designed for use in most soil types. The AMS regular soil auger is commonly used for obtaining disturbed soil samples at or near the surface and for boring to depths where soil...

The AMS sand auger uses a closed bit design with a restricted opening to prevent the loss of sampled material during retrieval. The sand auger has a cylinder similar to the regular soil auger, but...

AMS Flighted Screw Augers are designed for use in hard, rocky, and compacted soils. The AMS flighted screw auger is capable of creating a borehole in tough, hardened soil conditions in order to...

In very cohesive, clay soils, Edelman Clay Augers have the advantage of narrow blades that meet with little resistance. The typical design of Edelman Clay Augers allows for minimum friction while the...

The unique design of the open-face auger allows for quicker penetration into combination soils. The cutting head of the AMS open-face auger helps the auger pull itself into the ground with little...

The combination auger type gets a reasonably good hold of sandy material while more cohesive muds and clay soils can be fairly easily removed from the auger body. The bits of Edelman Combination...

The AMS Dutch Auger allows you to easily collect disturbed soil samples in heavily rooted areas. Hand-forged from high-carbon steel and honed to a fine cutting edge, this auger will cut through...

The AMS Sand Auger uses a closed bit design with a restricted opening to prevent the loss of sampled material during retrieval. The Sand Auger has a cylinder similar to the regular soil auger, but...

The Combination Auger type gets a reasonably good hold of sandy material while more cohesive muds and clay soils can be fairly easily removed from the auger body. The bits of Edelman Combination...

The AMS Dutch Auger allows you to easily collect disturbed soil samples in heavily rooted areas.Hand forged from high-carbon steel and honed to a fine cutting edge, this auger will cut through highly...

AMS Regular Augers are designed for use in most soil types. The AMS regular soil auger is commonly used for obtaining disturbed soil samples at or near the surface and for boring to depths where soil...

AMS Flighted Screw Augers are designed for use in hard, rocky, and compacted soils. The AMS flighted screw auger is capable of creating a borehole in tough, hardened soil conditions in order to...

Designed for sampling wet clay and peat. The AMS gouge auger has a long, tapered stainless steel, semi-cylindrical chamber that is designed for collection of undisturbed soil samples from very soft...

The AMS Planer Auger removes loose soil and other materials from the bottom of an already augered hole. This auger is fitted with a cutting blade on the underside of the auger cylinder. The flat,...

AMS professional series sampling kits come with 3/4in threaded professional regular auger and mud auger (2 1/4in or 3 1/4in), as well as three 4ft extensions, 18in rubber-coated cross handle, 10 lb...

Select a CountryCanadaAfghanistanÅland IslandsAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCambodiaCameroonCape VerdeCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos (Keeling) IslandsColombiaComorosCongo, Republic of the (Brazzaville)Congo, the Democratic Republic of the (Kinshasa)Cook IslandsCosta RicaCôte d"Ivoire, Republic ofCroatiaCubaCuraçaoCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland Islands (Islas Malvinas)Faroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern and Antarctic LandsGabonGambia, TheGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHoly See (Vatican City)HondurasHong KongHungaryIcelandIndiaIndonesiaIran, Islamic Republic ofIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea, Democratic People"s Republic ofKorea, Republic ofKuwaitKyrgyzstanLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacaoMacedonia, Republic ofMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesia, Federated States ofMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRéunionRomaniaRussian FederationRwandaSaint BarthélemySaint Helena, Ascension and Tristan da CunhaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint Maarten (Dutch part)SlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and South Sandwich IslandsSouth SudanSpainSri LankaSudanSurinameSwazilandSwedenSwitzerlandSyrian Arab RepublicTaiwanTajikistanTanzania, United Republic ofThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUnited States Minor Outlying IslandsUruguayUzbekistanVanuatuVenezuela, Bolivarian Republic ofVietnamVirgin Islands, BritishVirgin Islands, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabwe

Our drilling division operates a fleet of drilling rigs including three rotary drills, two cable tool rigs and an auger rig. The rotary drills are capable of drilling up to 24 inch diameter using dual rotation, mud or air rotary techniques. Our cable tool rigs are used for drilling large diameter production wells under difficult down hole conditions and as work-over rigs for well rehabilitation, casing perforation and pulling large pumps. The auger rig is equipped with angle capabilities and has the torque and flexibility to turn 8 inch and 12 inch diameter hollow-stem augers, solid augers, mud or air rotary roller bits, rotary wash wire-line coring, and a variety of geologic sampling tools. The auger rig is primarily used for geotechnical studies and environmental investigations. Our range of drilling expertise includes; large and small diameter production wells for domestic uses, industry, agriculture and municipal clients with pumping capacities up to 2,800 feet deep and exceeding 5,000 gallons per minute. We have installed monitoring wells from 10 feet to over 1,000 feet under safety levels B, C and D protocols. Our experience and capabilities also include mineral exploration, geothermal wells in excess of 2,000 feet, cathodic protection installations along natural gas pipelines, well repair, rehabilitation, abandonment and down hole videos. Our pump division maintains three pump service trucks to provide full service and supply of water systems including pumps, water softeners and water treatment systems for all uses including environmental remediation systems. Our pump rig operators are all licensed for specialty plumbing and electrical installations. To support and augment the drilling and pump service operations we maintain large assemblages of air compressors, mud pumps, fluid handling systems, service trucks and transport vehicles. Our mechanical fabrication and machine shop is used to keep the equipment in top running form and to manufacture specialty tools as needed to complete projects in nearly any environment. Hiddleston Drilling & Pump Company is a long established firm with the professional staff and equipment necessary to successfully complete your project. If you have any questions or would like more information on our capabilities, equipment, project references or to discuss your special drilling needs do not hesitate to contact us.

Secondingauger pumps come in three types, first being the most common one. Auction piston pumps, such as a suction piston pumps, have two different types, and are available. In addition to the pumps, the suction piston pumps come with two different types, first beingauger pumps and the other type of pumps are the. A booster pump, also known as a suction piston pump, is advisedement by the pump at the end of the pump. A more piston pump is also advisedement of the pump as a choice in pumping and pumping applications.

Auger pumper pumps are a great option for people who want to spend more time on their company. You can find pumps wholesaleauger pump, wholesaleauger pumps on Alibaba.com, where suppliers offer a lot of products at different prices, including electric booster pumps, and moreauger pumps are great, they all come in different sizes and designs. On Alibaba.com, you can find different types ofauger pumps wholesale, such as electricauger pumps, and electricauger pumps at great prices, when you buy in bulk and at great prices on Alibaba.

The majority of these pumps enhance ergonomic comfort, and they are more comfortable to maintain. The hourglass pumps are a great choice for people of all ages, and they are designed to circulate and move the correct way. Theauger pumps feature silicone, which makes them easier to move and carry more.

Browse the booer pumps as a secondary, and ergonomic support can improve the operation of the pump. Additionally, the pumps enhance ergonomic support.