auger mud pump for sale

Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of a directional drill.

Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of the directional drill.

Manufactured 1998, 1602 hours, 4" plungers with hydraulic charge pump, Detroit Series 50 (rebuilt), 5 speed, Skid mounted with fuel tank, Rebuilt expendables with seals, valves, seats, packings and gaskets.  Price:  $72,500

Complete without traction motors.  9” bore x 15” stroke, single acting, working pressure up to 7500 psi, (3) interchangeable forged steel fluid end modules with separate suction and discharge sections, Premium grade fluid end expendables with 6-1/2” pistons and liners, suction manifold with (3) 12” flanged inlets, SD8 suction desurger, pressure manifold with (2) 5-1/8” 10,000# API flanged outlets, liner wash system, 1 x 1-1/2” mission centrifugal pump p/b 3 hp electric motor, external power end lubrication pump, steel skid, suction line pressure relief valve, set of standard service tools  Price:  $675,000

CENTERLINE 7-1/2 X 10 MUD PUMP(Ref#14556Tb)  high pressure, no engine, needs retaining liner cage and (1) side suction manifold needs replacing, unmounted  Price:  $39,500

3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6-3/4", stroke 10", 10,000 PSI hydrostatic pressure of standard cylinder. 2.853 ratio of gears. 10" suction connection, 6" discharge connection. Valve pot mod .7., steel fluid ends, 5,000 psi pulsation dampener. Oilfield skid mounted. Performance Data: at 120 strokes per minute with 6-3/4" liners, pump will produce 4305 PSI and 574gpm. Set up for electric power. Dimensions and weight: 84,000 lbs, 209"L x 113"W x 75"H. Built 1976. Located India, removed from offshore drilling rig. Price: $75,000 each

approx. 7000 hours, Cat 3512C (1476 hp), 5000 psi fluid end cylinder, 5-1/2" piston cylinder, antifreeze heaters, WPT W21-CG-300 Type 1 PTO clutch, 16 grooove drive sheave, 16 groove bullwheel, 16 groove Kevlar belt with necessary guards, 5 x 6 x 11 charge pump c/w 50 hp@1200 rpm electric motor.  Discharge plumbing: 2" 5M XXH B/W Oteco gate valve, 4" 5M XXH b/w Oteco gate valve, 3" 5M Oteco popoff valve w/1502 connection, 2" 5M type D Oteco mud gauge with 1502 connection, Hydril 20 gal 5M pulsation damper.  Mounted on oilfield skid with separate, with expendables cabinet, knowledge box and removable engine skid for breaking the engine and pump into separate smaller loads.  Winterization package, oilfield lighting, explosion proof starters for charge pump, rod oiler pump and liner wash pumps.  Price:  $695,000 - Make Offer

Two Available, each complete with Cat 3508 diesel engines, pulsation dampener, and mud tanks with desander, desilter, etc.  Price for Package:  $110,000

Cat 3408 engine air start with pump drive and belt guard, PD55 Hydril dampener, 750 gallon fuel tank, mounted on heavy duty drop deck tandem trailer,  low hours  Price:  $87,500

14" stroke, 2" rod size, 400 hp, 75 strokes per minute, cast fluid ends, unitized on oilfield skid with Cat 3406 diesel engines, air start, new filters, oil and coolant, air receiver on deck, fluorescent lighting, drive belts with air clutch.  Gone over and in good operating condition, ready to be put into service.  Pumps currently have new 6" liners with production being 480 gpm @ 1000 psi.  All fluid end parts are brand new and never used, including the valves, gears, liners, pistons, rods, head gasket, and rod packing, equipped with pulsation dampener.  32" long x 11" wide x 7" high 50,000# weight

GARDNER DENVER TEE MUD PUMP(Ref#6440T)  New, unused, manufactured 2014, 4 available, bare pumps  Price:  $39,500 each  New Cat C7 engines available at additional cost

Pump only.  5" stroke, 300 hp, steel billet fluid end, 2-3/4" ceramic plungers, Delrim disc valves, 838 packing, 6" RF suction connection, 3" RTJ discharge connection, 231 gpm max, 2020 psi, max 360 rpm  Price:  $82,500

Two available, rebuilt, cast ductile iron fluid ends, used for oil service, bare pumps, no engines, unmounted, one is flanged for suction/discharge, one is threaded  Price:  $20,000 each

Cummins 150 hp reconditioned engine with snap-in clutch, 90 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, 4’ back up drill pipe bumper guard, front and rear loading hitches, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard Price: $82,500

Detroit 671 engine with Snap-In clutch (Gen Set approx. 1500 hours),  replaced fluid end parts with 4” liners,  mounted on 8’ x 12’ trailer with adjustable pintle and DOT lighting, 75 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard, 2’ x 2’ x 5’ lockable HD toolbox, mouting beams and steel/bolts  Price:  $41,500

8" x 17" base (mud boat), John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank, Dayton oiler pump system and tank, 4" suction hose and winch boom, 4" backup drill pipe bumper guard, front and rear loading hitches, 42" bull wheel with power band belt, belt guard  Price:  $99,000 PRICE REDUCED:  $73,500

750 hp, 8" stroke, 6" suction inlet, 4" discharge outlet, piston size 4-1/2" - 7",  max rod load 85,000#, approx. weight 11,500#, lubrication force fed, steel pump power end, double helical gears, 4.95:1 gear ratio, rod bearings sheel type replaceable, main bearings straight roler, pinion bearings spherical roller, crankshaft 1pc forged alloy steel, connecting rod knuckle joint, crosshead guide bronze replaceable, piston type fluid end Monoblock design, from high strength alloy steel, treated and sonic tested, Cat D379 diesel engine, 500 HP max linear bore size 3-1/2 - 6-1/4 x 7-3/4" stroke, test pressure 10,000 psi, gear ratio 2.742.8" suction line to 4 discharge stroke, location South America  Price:  $110,000

Two available, Skidded, Detroit Series 60 diesel engine DDEC V (475 hp), Allison 750 (6-speed) transmission with lock up control pane, Mission 4 x 5 centrifugal suction pump, 4” plungers, pulsation dampener, pressure gauge, safety valve, 10,000 psi fluid end, 5000 psi working pressure, NOV plug valve control manifold (4-valve) configured for 15k operation.  Can be configured to kill wells, acidize, cement, reverse circulate, drill out frac plugs or run in tandem.  Self-contained with fuel and fluid tanks and controls.  Steel canopy over skids, covered battery boxes, new batteries and disconnect switches.  Well maintained and in excellent condition.  Low hours on pumps and motors.  Ready to work.  Price:  $154,500 each

1600 hp, 12" stroke, 5000 psi, pulsation dampeners, pop off pressure release valve, pump pressure gauge, forged discharge manifold, overhead track for chain hoist, mounted on shipping skid, line washer pump, 6" liners, overall size:  192 x 128 x 105-3/4", inspection report available  Price:  $137,500

14 liter Detroit Diesel, 6061 Allison automatic transmission, rebuilt power end, new expendables in fluid end, new charge pump, skid, tanks, Pilfer 5 valve manifold, 15k fluid end, new paint  Price:  $215,000

Manufactured 1999, 1000 gal holding tank, (2) 3 x 4 Mission Magnum pumps with mechanical seals, MC255-2C mud cleaner, sand guzzler, Versa-drill rig jacks, Perkisn engine, spare hyd pump and filters, well maintained, ready to work  Price:  $59,500PRICE REDUCED: $49,500

Mounted on 12K GVRW trailer, hydraulic powered spool with approximately 500 of 2” hose, internally routed power and safety cable, 7.5 HP pump and motor, Whisper Watt 25kva 3-phase diesel generator with approx. 3100 hours  Price:  $45,000

Secondingauger pumps come in three types, first being the most common one. Auction piston pumps, such as a suction piston pumps, have two different types, and are available. In addition to the pumps, the suction piston pumps come with two different types, first beingauger pumps and the other type of pumps are the. A booster pump, also known as a suction piston pump, is advisedement by the pump at the end of the pump. A more piston pump is also advisedement of the pump as a choice in pumping and pumping applications.@@@@@

Auger pumper pumps are a great option for people who want to spend more time on their company. You can find pumps wholesaleauger pump, wholesaleauger pumps on Alibaba.com, where suppliers offer a lot of products at different prices, including electric booster pumps, and moreauger pumps are great, they all come in different sizes and designs. On Alibaba.com, you can find different types ofauger pumps wholesale, such as electricauger pumps, and electricauger pumps at great prices, when you buy in bulk and at great prices on Alibaba.@@@@@

The majority of these pumps enhance ergonomic comfort, and they are more comfortable to maintain. The hourglass pumps are a great choice for people of all ages, and they are designed to circulate and move the correct way. Theauger pumps feature silicone, which makes them easier to move and carry more.@@@@@

Browse the booer pumps as a secondary, and ergonomic support can improve the operation of the pump. Additionally, the pumps enhance ergonomic support.

Buy wholesale mud auger for both professional and home use at great bargains. For those of you who like to build your own furniture or work on home decoration and renovation yourselves, look into the variety of drills that are available on sale. Tools like table saws and chainsaws are also readily available. There are several other types of power tools that are on sale at amazing prices.

For those of you who are looking to replace your old and worn hardware tools, look into the selection of quality hammers, pliers, and screwdrivers to upgrade your current kit. For mud auger that can deal with harder materials or heavier loads, look into the options for shovels and sledgehammers that are on sale. Tools like log splitters are also on sale at reasonable prices. Look into the different sizes of such tools that are available to pick the one that is suitable for your needs.

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

Kohler Gas, Three Speed W/ Two Speed For Coring, Moyno Pump , Cathead, One Winch, Has Wheels To Move On Hard Surface And Skids Can Be Bolted To Drag Machine.

6 Cyl. Ford Deck Engine, Moyno Pump, Water Tank, (2) Auger Racks, 6-5/8" & 4-1/4" 50" Each Augers, Includes Side Port Swivel And 3 1/2" Air Hammer. Auger / Air / Mud Drilling. Well Maintained, Mounted On Ford 8000, w/ Cat Diesel. Good Condition.

Deutz 4 Cyl. Diesel Deck Engine, Rebuilt 4 1/2 X 5 Gardner Denver Mud Pump W/ Reinforcement Plates For Mounting, Automatic Hammer, Automatic Hammer Calibration Done In 2019, (3) Leveling Jacks, (2) Winches, Can Add A Third Winch, New WRM Top Feed Swivel 2JW, U-Joint For Augers 1-5/8 HEX, Extruder For Shelby Tubes Samples, New More Info »

Cummins Deck Engine. Breakout Wrench, 3L8 Moyno Water Pump, Wiggle Tail, Wireline Winch, Hyd. Leveling Jacks, Mounted On 1992 Ford Single Axle, w/ Diesel.

3L6 Moyno Mud Pump. Safety Driver Winch, Cathead, Aux Winch, Main Winch, (3) 36”Jacks With Controls In The Drivers Area, Ready To Work, Mounted On ATV Carrier, w/ 4BT Cummins. Good Condition.

Duetz 57HP Diesel Deck Engine, 18" Mast, Angle Drill Capabilities, In-Out And Side To Side Slide Base, 435 Bean Pump, 140 Lb. Auto Hammer, 3,200 Lb. Main Hoist, (1) Wire Line, Recovery Winch, (3) Hyd. Leveling Jacks, (2) Side Tool Boxes, (3) Rod Racks, Front Auger Rack, Approx. 444 Hours, New Engine Installed In 2015, More Info »

Deutz 5 Cyl. Diesel Deck Engine. One Owner Rig, Cathead, 10K LB. Main Winch, 4,000 Lb. Aux. Winch, 3L6 Moyno Pump, 500 Gallon Water Tank, 4,688 Hours On Deck Engine Rebuild, 161, 914 Miles On Truck, Mounted On 1990 Ford F800 4 x 2. Good Condition.

3L8 Moyno Mud Pump. Breakout Table And Breakout Wrench, Auto Hammer (Replaced 2016), (4) Winches, Wireline 1800#, Main Winch 7000#, High Speed Aux 1800#, Low Speed Aux 3200#, 12250 Hours, Professionally Refurbished In 2013, 2250 Hours Since Refurbished, Mounted On ATV Carrier, w/ 4BT Cummins Turbo Diesel. Good Condition.

4 Cyl. Ford Deck Engine. Auto Hammer, 3L6 Moyno Pump, In/Out Slide Base, (2) Winches, 200 Gallon Water Tank, Front Hyd. Winch, (3) Leveling Jacks, Mounted On Yanmar C-60R, w/ Diesel.

3L6 Moyno Mud Pump, PTO, NO Deck Engine. (3) Hyd. Jacks, Safety Driver Hoist, Pullmaster Main Hoist, Auger Rack. Mounted On 1986 Muskeg Bombardier. Good Condition.

Bean Mud Pump, 6 Cyl. Ford Deck Engine. One Owner Rig, (3) Hyd. Jacks, Hyd. Safety Hammer, (3) Winches, In/Out & Side/Side Slide Base, 45" Of 6 1/4" HS Auger, 100" Of NW Rod. Mounted On 1986 Ford 8000, w/ 3208 Cat. Good Condition.

PTO, No Deck Engine. 1500 Gallon Water Tank, 3" Bowie Loading Pump, Heated Pump Box & Water Tank, Jake Brake, A/C. Mounted On 89 Ford 9000, w/ 3306 Cat. Excellent Condition.

3L8 Moyno Mud Pump, Cummins Diesel Deck Engine. Tandem Axle, (4) Hydraulic Leveling Jacks, (2) Winch Lines, Breakout Wrench, Side Port Swivel, Angle Drilling Attachments, (2) Swivel Auger Racks Mounted On The Rig, Drillers Stand, Sliding Drawworks, (Side To Side Also Back & Forward), Mounted On 89 Kodiak 70 Series, w/ 3208 Cat Diesel. Good More Info »

Bean 35 Mud Pump, Tooling For Auger Work And Diamond Core To 2000", Injection Pump, Low Hours, 71 XXX Miles On Carrier. Mounted On 76 International 4X4.

3L8 Moyno Mud Pump, (2) Winches, Toolboxes, Auger Rack, Hyd. Leveling Jacks, Electric Over Hyd. Controls, Deck Mtd. Hyd. Drive 2,000 PSI Steam Cleaner / Power Washer. Mounted On 90 International 4 X 2 w/ DT466 185 HP. Good Condition.

5.-- Compact, safe suction valve and discharge valve are interchangeable, main components of hydraulic cylinder and fluid end on each pump are interchangeable

6.-- Durable fluid end greatly improves the performance of triplex mud pump; furthermore, its independent structure makes examination and maintenance convenient