buy apace three inch mud pump supplier

Mud Pumps are available for the different purposes of drilling and extracting of oil. In fact, the Unitized Pumps are a work of the hydraulic mechanical transmission. Unitized pump parts include 4 types of packages such as the air clutch transmission takes in the diesel engine, transmission (including card and shaft, decelerator, clutch, belt and pulley) and the Mud pump. The Mud Pumps are also inclusive of the hydraulic coupling transmission that consists of the diesel engine, hydraulic coupling and the Mud pump. It also includes the electric drive Mud pump and the chain transmission for apt design and assembling.

The Unitized design Pumps are built as well as licensed according to the specifications of the American Petroleum Institute where the master skid is the standard oilfield 3 runner skid. Mud Pumps like the F 1000 are driven by the diesel engine with the help of the narrow V belts. Pumps are complete with a bulk wheel, a set of V belts, a screw assembly, a belt guard and the screw devices for tightening the belts. Mud pump like the triplex liner single action pumps has an input power of 1000 horse power. The maximum stroke is all of 10 inches or 254 mm.

Mud parts also contain a maximum working pressure of 5000 PSI or 35 MPA. The Mud Pumps have a gear type made of integral herring bone with API 6 valve pots. The intake of the F 1000 Pumps is 12 inches or 305 mm and they have a discharge space of 4 inches or 102 mm. Mud pump also contain a pulsation dampener model that has a capacity of 75.7 liters or 20 gallons. The relief valve and pressure gauge are also an important part of the Mud pump as they help in various ways.

Mud pump like the diesel engine has a rated speed of about 1200 revolutions per minute and the movement takes place in an anticlockwise direction with the face output shaft end. For the purpose of testing and commissioning, the Mud pump needs to be installed and secured with machinery and different kinds of equipment. Furnish the lube products for testing and the diesel is required to be run for testing the transmission devices. To give you an idea, the Mud pump that is being discussed in this category is available at competitive prices and can be obtained for pneumatic clutch transmission that can be adjusted according to customer’s requirements.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

This ¼-horsepower sump pump weighs 6.8 pounds and moves up to 1,800 gallons per hour (gph) to keep your basement or low-lying area safe from floodwater. Built with thermoplastic, this sump pump is a durable flood-prevention device that includes a removable suction screen.

Customers with varying needs found this sump pump to be useful, stating that it operated efficiently and quietly. They added that the pump’s filter did a great job in preventing the unit from getting clogged due to dirt, debris, or algae build-up. Customers who were disappointed in this product wished that it would’ve lasted longer, citing reliability and longevity issues.

This submersible sump pump is built with cast-iron motor components that withstand a variety of conditions and keep your home protected from rising water. It includes a float-activated switch that automatically powers the pump when it detects rising water levels.

Although customer feedback was mixed, over 80% of reviewers gave this sump pump a five-star rating at the time of this review. Happy customers mentioned the pump’s simple installation and affordable price point in their positive reviews. Unhappy customers said that while the pump was heavy-duty, it shorted out after a few years, expecting greater longevity out of the product. Additionally, one user had issues with the flow valve leaking.

This sump pump has a 1⁄3-horsepower motor activated by a vertical float switch to keep your basement dry. It’s designed with quality cast iron and stainless steel, minimizing the risk of air locks and clogs. The sump pump works in sump basins that are 11 inches or larger.

Positively, customers who give this sump pump a four- or five-star rating reported that the unit consistently moved water without any issues, meeting or exceeding their expectations. In some reviews, they also mentioned that the manufacturer’s Halo mobile app was convenient for remotely monitoring the pump’s status. Negatively, there were complaints about the pump’s float switch working intermittently rather than consistently.

This unit is built for large 16-inch sump basins and has a built-in backup battery that pumps up to 10,000 gallons of water on a single charge. It has a ½-horsepower motor protected by a durable cast-iron and epoxy-coated steel frame, pumping 5,100 gallons of water per hour.

Positive aspects of this sump pump that users highlighted included its compact size, fast installation, quiet operation, and overall power. On the other hand, several reviewers reported that the manufacturer was slow to respond to their inquiries, or didn’t respond at all, despite multiple attempts. One user also complained about the plastic threads in the discharge outlet, stating that it was difficult to screw in adapters.

This model is equipped with a piggyback plug that lets homeowners automatically or manually turn on the pump to discharge up to 2,760 gallons of water per hour. It includes a ⅓-horsepower motor contained inside a heavy-duty cast-iron frame to secure the pump inside the pit.

Satisfied users who gave this pump positive reviews said that it was an effective pump that performed just as strongly after two years of use as it did on the first day of use. They also appreciated the pump’s effortless installation. Conversely, there were some reports of the sump pump’s cast iron materials prematurely rusting, rendering the unit useless for a handful of customers. Additionally, some users said that the float switch was too short, which lead to excess standing water.

With its thermoplastic materials and 1/4-horsepower motor, this sump pump will make sure that your property remains undamaged due to excess water intrusion. Its built-in bottom suction filter removes water down to a 1/4-inch of the surface to prevent dirt clogging.

Given the pump’s entry-level price point, several customers were impressed with how reliable and powerful it was. They mentioned that the pump was effective for draining pools, adding that the 10-foot power cord offered some flexibility with the positioning of the pump. Alternatively, there were some complaints about the unit’s inability to pump viscous, muddy water, and others wished that the unit pumped water faster.

Submersible sump pumps are completely submerged in the pit, or sump basin, that’s located below your basement’s floor. Once the pit fills with a certain amount of water, a sensor is triggered, which turns on the sump pump to pump the water out. This type of sump pump is typically quieter than other types of sump pumps because its motor is inside the pump, but it’s more expensive than other pumps.

Pedestal sump pumps sit in a basin that’s level with your basement floor and remove water through a pipe that leads to a drainage area in your yard. They’re more affordable than submersible sump pumps, but their motor is attached to the outside of the device, making them noisier.

Unlike submersible and pedestal models that run solely on electricity through a power cord, battery backup sump pumps have a battery-powered backup pump that kicks on when the main unit can’t run due to a power outage. The battery on the backup pump can typically last for a few hours on a single charge. While this is enough for short surges, the battery will eventually die if it’s pumping a lot of water during an hours-long outage.

Combination sump pumps include the power cord of pedestal and submersible models and the backup battery of battery models, allowing them to work in all situations. They usually sit in a below-the-floor basin like submersible sump pumps, but they’re larger, which means you can’t use the basin you dug for your old submersible sump pump for your new combination sump pump.

Before purchasing and installing a sump pump, it’s important to understand how each model’s design and specifications impact its performance. Here are a few factors to consider when buying a sump pump.

Most sump pumps are powered by electricity, but some models include a battery backup that powers the device in the event of a blackout. For example, some pumps include a battery that can pump thousands of gallons on a single charge. Models that don’t have a battery backup can pump thousands of gallons of water per hour as long as electricity is available.

The horsepower (HP) of a sump pump’s motor refers to its overall power, with a higher HP motor being able to pump more water per hour than a lower HP motor. Many sump pumps contain ½-HP or ⅓-HP engines, though some models contain more powerful ¾-HP engines. While higher HP motors can pump more water per hour, they’re typically more expensive.

Most sump pumps use either a digital or manual switch to start their motors. Manual models contain floats that rise with the flood water, turning on the pumps when the water reaches a certain level. When the floats dip below the set level, the pump stops.

Other models feature digital on-and-off sensors. When the water rises to meet the on sensor, the pump starts working. Once the water lowers and reaches the off sensor, the pump turns off. The benefit of digital switches is that they continue pumping water until they reach the off sensor, even if the water level dips below the on sensor.

Sump pumps are usually made of plastic or some sort of metal, such as aluminum, stainless, steel, or cast iron. Plastic sump pumps are more affordable, but they’re not as durable as metal sump pumps.

A sump pump is typically placed in a basement to prevent damage brought on by significant flooding. It detects rising water levels and then pumps that water out of your basement and directs it away from your home.

Sump pumps can develop an odor if they haven’t been used in a while. Infrequent use causes the water in the pump’s basin to fully dry, releasing smelly gases into the air. Mold and bacteria growth inside the pump and the basin can also cause a smell.

You can eliminate these odors by creating a solution with a ratio of 1 cup of bleach to every 1 gallon of water. Pour this solution into the basin until the pump is activated. To prevent an odor from developing in the future, wash your sump pump regularly and keep the basin full of enough fresh water to cover the drain lines.

Buy Goulds Pumps @ The Guaranteed Lowest Price! PumpProducts.com is a stocking Goulds Pump Distributor, offering the lowest prices on all Goulds Pumps For Sale. We sell Goulds Pumps Direct to the Consumer, Contractor and Industrial market, so you pay less for all of your Goulds Pump Products. Buy Goulds Pump Parts For Every Goulds Pump Made @ PumpProducts.com.We listed all of the Goulds Pumps & Parts For Sale on our website along with Interactive Pump Diagrams, Brochures, Pump Curves & Specifications so that you can find the Goulds Pumps your looking for quickly and At The Lowest Price Available Anywhere! PumpProducts.com delivers Goulds Pumps Direct To Your Door from our warehouses throughout the country as well as from theGoulds Pump Manufacturer.

PumpProducts.com is a Stocking Goulds Pump Distributor and if your asking "Where is there a Goulds Pump Dealer Near Me", PumpProducts.com offers Nation-Wide & Next Day Delivery on all Goulds Pumps & Parts In Stockso you don"t have to wait to make a fast repair or replacement of your Goulds Pump. We sell Goulds Pumps Direct to the Consumer, Contractor, Commercial, Industrial and Municipal markets, so you pay less for all of our Goulds Pumps For Sale. You can Search our On-Line Goulds Pump & Parts CatalogFor Prices, Buyers Guides & Reviewsor Call our Goulds Pumps Customer Support Counter @ 800-429-0800 - PumpProducts.com

Goulds Water Pumps are among the most widely recognized and respected brands in the global pump industry. The Goulds Water Technology product line includes Goulds Submersible Pumps, Goulds Well Pumps, shallow & deep well Goulds Jet Pumps, sump pumps, effluent pumps, sewage pumps and centrifugal pumps for the residential, commercial and industrial markets.

Goulds Water Technology is one of Xylem’s global brands that have served the market for several decades. Goulds helps to meet the world’s most critical water challenges by engineering a broad portfolio of products and services to create efficient systems and sustainable solutions to pumping problems.

Anyone who knows much about pumps knows that Goulds pumps are among the best. The Goulds brand is globally recognized and respected, available in over 150 countries worldwide, and the quality speaks for itself. Whether buying in stores or buy Goulds pumps online, people frequently search the web for a “Goulds pump dealer near me” precisely because they know they’re getting a quality pump!

If you’re in the market for a new pump, read on for more info about the types of pumps Goulds offers, as well the benefits of buying from this well-known, high-quality brand.

Goulds is known for quality, but their vast portfolio of products is also truly impressive. Here are some of the types of Goulds pumps you can buy online and at your local dealer:

These quiet pumps are built to use in a wide variety of applications. Nearly vibration-free, Goulds booster pumps come in several possible options: The Goulds Aquavar ABII Series is a complete booster system all in one. This kit comes with the pump, pressure tank, plus a variable speed controller and transducer. Goulds GB Series pumps are built for managing agricultural and residential washdown. The Goulds HB Series are great for high-pressure situations like condo high-rises or office buildings. The LB Series are stainless-steel encased pumps for use in systems requiring a flow rate of up to 18 gallons per minute.

Goulds offer several types of both horizontal and vertical centrifugal pumps with head capacities ranging from low to high. All Goulds centrifugal pumps are constructed with durable materials made to withstand the hardcore demands of agricultural, residential, and/or commercial use.

Designed with a variety of grey- and wastewater applications in mind, Goulds effluent pumps are submersible and made of high-quality materials. They are available in manual and automatic models.

Made specifically to handle sewage and wastewater, Goulds sewage pumps have single-phase motors with a thermal-overload protection feature to ensure your pump will last through the toughest jobs.

With electric, battery-powered, and water-powered options, Goulds sump pumps are built to prevent your basement from flooding by draining any standing water in your sump pit. They’re also made to be corrosion resistant and easy to service.

When your home is not connected to a municipal water supply, the odds are that you have a well that requires a high-quality pump to meet your family’s water needs. Goulds well pumps will exceed your expectations with convertible, submersible, shallow, and deep well options. These pumps also work well in small-scale irrigation and livestock water systems.

Goulds pumps have been on the market for several decades, so you can be certain that their quality has stood the test of time. You can also rest assured that they’ve kept up with changing pump technology. They’re one of the best brands in the industry for a good reason, and when you buy a Goulds pump, you know you’re getting a high-quality resolution for your pumping needs. Whether you’re dealing with a wet basement in need of a sump or an old well with an antique pumping system or you’re a builder with a large-scale pumping project, Goulds has you covered with an efficient and sustainable solution. Their pumps go through rigorous testing and meet strict temperature, corrosion, abrasion, and pressure standards. And Goulds is the only manufacturer of process pumps in the market that offers digital monitoring as a standard feature!

If you’re in the market for a pump, check out our full-service website or contact our Goulds customer support counter at 1-800-429-0800. We specialize in Goulds pumps, and we’re one of the largest online dealers for this well-known and highly respected global pump brand. We just so happen to offer them at the guaranteed lowest price, too! Whether you’re a direct consumer, small to mid-sized contractor, or a large commercial, industrial, or municipal entity, when you’re looking to buy Goulds pumps online, PumpProducts.com is here for you. Also, we offer Goulds pump accessories, alarms and controls, and repair parts as well. We’ve got everything you wish to get the work done right!

Goulds GFK and GFV series sewage pumps are designed for use in homes, sewage systems, dewatering/effluent systems, water transfer applications and any application in which waste and drainage must be disposed of quickly, quietly and efficiently read more....

Goulds GFK and GFV series sewage pumps are designed for use in homes, sewage systems, dewatering/effluent systems, water transfer applications and any application in which waste and drainage must be disposed of quickly, quietly and efficiently read more....

Goulds VTX series sewage pumps are designed for use in homes, water transfer systems, sewage systems, dewatering/effluent applications and any applications in which waste or drainage must be disposed of quickly, quietly and efficiently. read more....

Pump Products is now carrying the Goulds 1DM and 2DM series submersible sewage pumps. These well-built and efficient sewage pumps were designed to move wastewater in a variety of application settings, including homes, farms, read more....

The Goulds WS_D4 sewage pumps are sewage pumps designed to be used in conjunction with a guide rail system (A10-30/ A10-30B) or a base elbow disconnect system with 125# ANSI system flanges for horizontal discharge. Each of these pumps can handle up to 3” maximum waste solids. read more....

The Goulds 1DV series and 2DV series sewage pumps are versatile vortex sewage pumps that can be used in either simplex or duplex installations located in small lift stations, drainage systems or general read more....

Goulds WS_BHF series sewage pumps are capable of passing 2″ spherical solids and are built for use in homes, commercial applications and light industrial settings. These pumps can be used for effluent, sewage or general dewatering applications. Each pump is solidly constructed with a mix of cast iron and stainless steel parts.read more....

Goulds 3SDX series explosion proof sewage pumps are designed to move wastewater in potentially hazardous locations*, specifically in commercial and light industrial applications. Common application locations include sewage systems, flood and pollution control systems, in hospitals, trailer courts, hotels and motels. These pumps are submersible and capable of handling 2.5″ maximum waste solids.read more....

Pumps Products is now carrying the Goulds 2WD and 3WD non-clog series sewage pumps. Both series are rugged, heavy duty pumps designed specifically to handle wastewater transport, effluent transport and dewatering applications read more....

Pump Products is now carrying Goulds WW05 Model 3872 series sewage pumps. These sturdy pumps are specifically designed for use in residential wastewater systems and can also be used for dewatering for groundwater and general water transfer purposes. The construction of these pumps is rugged with the volute casing made of glass-filled thermoplastic for superior read more....

The Goulds WS_D3 sewage pumps are sewage pumps designed to be used in conjunction with a guide rail system (A10-30/ A10-30B) or a base elbow disconnect system with 125# ANSI system flanges for horizontal discharge. Each of these pumps can handle up to 2-½” maximum waste solids. read more....

Goulds WS_B Series Model 3886 pumps are rugged cast iron sewage pumps. These pumps were specifically designed for residential or light commercial usage in sewage systems and can also be used for dewatering/effluent and general water transfer applications. read more....

The Goulds 3SD and 4SD sewage pumps are high capacity submersible sewage pumps designed specifically to handle commercial and industrial level wastewater applications. All of these pumps haveread more....

Goulds 3887BF WS_BF pumps can be used for sewage, effluent and general wastewater applications in residential or light commercial settings. These pumps are ruggedly built with both a cast iron volute and impeller for corrosion resistance. The volute is flanged for easy installation on a slide rail or base elbow rail system while the impeller is a semi-open nonclog type with pump read more....

Pump Products is now carrying the Goulds 4NS series submersible non-clog sewage pumps. These sewage pumps have a 4″ 125# ANSI flanged discharge which allows the pump to pass wastewater containing up to 3″ non abrasive waste solidsread more....

Goulds PS series submersible sewage pumps are designed specifically for transporting wastewater in residential sewage systems. These pumps can also be used for heavy duty sump/dewatering applications and general water transfer. PS series pumps can handle up to 2″ waste solids.read more....

Goulds PV series submersible sewage pumps are heavy duty while also being portable and compact. Each pump is comprised of a corrosion resistant cast iron body with a thermoplastic vortex impeller which is capable of handling up to 2″ waste solids. read more....

Goulds AGS series axial grinder pumps use cutting edge grinder technology to meet the demands of modern residential wastewater applications. The AGS series was built for use in residential and small office new construction wastewater applications, applications where modern wastewater flushables create clogging issues and as a 2″ sewage pump replacement pump. read more....

Goulds 1GA and 2GA series grinder pumps are built for grinding municipal, commercial and industrial sewage into a fine slurry. These premium pumps are built to export that slurry to high heads in pressure sewage systems. 1GA and 2GA series pumps can even grind commercial raw sewage containing small quantities of plastic, rubber, cloth, paper and other non-abrasive solids. read more....

Goulds grinder retrofit kits are all-in-one grinder units designed to replace existing grinder pump systems. These Goulds grinder retrofit kits are designed specifically for high head residential/domestic sewage applications with a drop-in core style. read more....

The Goulds 1GD series grinder pumps are a premium series designed for high head sewage applications where a gravity system is not practical, as well as pressure sewage applications. The Goulds 1GD series pumps can handle solids up to 3″ in diameter. read more....

Goulds RGS series grinder system packages are all-in-one units designed for use in high head sewage applications where a gravity system is not practical, as well as for pressure sewage systems. Both simplex (single pump) and duplex (dual pump) models are available. read more....

Goulds RGS2012 series submersible grinder pumps are specifically designed for high head sewage applications where installing a gravity system is not practical. They are ideal for grinding in pressure sewage applications. The cutting system is a unique anti-roping design with a two blade rotary cutter threaded to the shaft. read more....

Goulds 2ED series effluent pumps are submersible effluent pumps that can be used in a wide variety of effluent systems, commonly found in farms, trailer courts, motels, schools, hospitals and various industrial settings. 2ED series pumps can handle spherical solids up to 3/4". read more....

The Goulds EP04/EP05 submersible effluent pumps are designed for use in a variety of graywater and wastewater application settings, including homes, farms, effluent systems, heavy duty sump systems and dewatering systems. These pumps can also be used for general water transfer purposes as well. read more....

Pump Products is now distributing the Goulds WE series submersible effluent pumps, which are specifically designed for on-site graywater treatment in homes, farms, trailer courts, motels, schools, hospitals and industrial effluent systems. Each pump has a 2″ NPT integrated vertical discharge and can move graywater containing up to 3/4″ non-abrasive solids.read more....

The Goulds GSP0311 sump-effluent pump series is a a premium quality series pump designed to keep your basement dry. Goulds GSP0311 pumps are specifically designed for residential sump systems and can handle solids up to 1/2″ in diameter. read more....

The Goulds GSP0511 sump-effluent pump series is a a premium quality series pump designed to keep your basement dry. Goulds GSP0511 pumps are specifically designed for residential sump systems and can handle solids up to 1/2″ in diameter. read more....

The Goulds LEP07 series submersible effluent pumps are lightweight, compact and portable pumps built for transferring graywater with up to 3/4″ spherical solids. The LEP07 series are specifically designed for residential effluent systems, general water transfer applications, dewatering applications and heavy duty sump applications. read more....

The Goulds PE series effluent pumps are heavy duty graywater pumps which are able to pass water with up to 1/2″ solids. These pumps are specifically designed for use in on-site wastewater treatment application settings, such as mound systems, dosing systems, low pressure pipe systems, basement draining and heavy duty dewatering applications.read more....

Goulds EB series blaster filtered effluent pumps are designed for pumping filtered effluent from processed septic systems only. These pumps are high head pumps with multiple stages in each model. Designed for continuous duty, the EB series pumps can be rebuilt in the field to “like new” condition with common tools and spare parts. read more....

The Goulds 1DW dewatering pumps are some of the finest, most well-constructed dewatering pumps on the market today. This pump series is specifically designed for handling dirty waters, draining ditches and pits, excavating in the building trades, industrial water drainage and general water transfer applications.read more....

The Goulds SD series sink drain pumps are a fully assembled package designed for wet bars, laundry trays, air conditioning condensate, dehumidifier condensate, residential dishwashers and beautician sinks. The pump is built into the basin which has a built-in threaded inlet, vent and discharge connections. read more....

Like it’s cousin the Goulds 1DW series, the Goulds 2DW “Ditch Wizard” pumps are designed to move water from drainage ditches, as well as trenches, basements and manholes. These Goulds 2DW pumps are constructed with durability and corrosion-resistance as its priority. read more....

Goulds ST31 submersible sump-effluent pumps are designed for basement draining, water transfer, dewatering and effluent transfer applications. These heavy duty, portable and compact pumps can handle up to 1/2″ spherical solids. read more....

The Goulds GSP0311 sump-effluent pump series is a a premium quality series pump designed to keep your basement dry. Goulds GSP0311 pumps are specifically designed for residential sump systems and can handle solids up to 1/2″ in diameter. read more....

The Goulds GSP0511 sump-effluent pump series is a a premium quality series pump designed to keep your basement dry. Goulds GSP0511 pumps are specifically designed for residential sump systems and can handle solids up to 1/2″ in diameter. read more....

The Goulds WEHT high temperature sump pumps series is designed for extreme operating conditions and is instrumental where liquids are too hot for conventionally built submersible pumps. Common applications include moving wastewater coming from high temperature processes like boiler blow down or hot water rinses in the commercial plumbing market, as well as applications requiring handling liquids up to 200ºF. read more....

These Goulds LSP03 and Goulds LSP07 series pumps are built with corrosion resistant stainless steel construction to withstand the corrosive effect of too much groundwater. These pumps are lightweight, compact and portable. Although basement pumping is the primary function, they can also be moved and used for other dewatering applications.read more....

Goulds ST51 /ST71 submersible sump-effluent pumps are designed for basement draining, water transfer, dewatering and effluent transfer applications. These heavy duty, portable and compact pumps can handle up to 1/2″ spherical solids. read more....

Goulds 1SC series pumps are drainage booster pumps for high pressure dewatering applications. They are mainly used for pumping water out of reservoirs and storage tanks and can often be found in houses, farms, mobile home parks and motels. Each pump contains multiple stages (3, 4 or 5) for increased pressure applications. 1SC pumps can handle up ⅛” suspended solids and can be submerged in water up to 65 ft. Single- and three-phase models available.read more....

The Goulds AU series trash pumps are gasoline engine driven centrifugal pumps designed to pump muddy water with minute qualities of suspended solids. These self-priming pumps are perfect for home, farm and cottage water system applications, as well as booster service. read more....

Goulds SE series multi-stage booster-effluent pumps are high head bottom suction pumps ideal for filtered onsite effluent systems, cistern booster systems, shallow dug wells, shore wells and aeration applications. SE series pumps can handle up to 1/8″ suspended solids. read more....

Goulds basin packages come pre-assembled and are built for a variety of pumping and water system installations. These Centripro assembled packages are built for use with guide rails and are available for both simplex and duplex systems. 2″, 3″ and 4″ connection models are available. read more....

Goulds RGS series grinder system packages are all-in-one units designed for use in high head sewage applications where a gravity system is not practical, as well as for pressure sewage systems. Both simplex (single pump) and duplex (dual pump) models are available. read more....

The Goulds SD series sink drain pumps are a fully assembled package designed for wet bars, laundry trays, air conditioning condensate, dehumidifier condensate, residential dishwashers and beautician sinks. The pump is built into the basin which has a built-in threaded inlet, vent and discharge connections. read more....

Sulzer offers one of the most comprehensive ranges of submersible pumps available on the market today. The applications extend from pumping of light and medium duty within residential and commercial properties to pumping of heavy duty with high concentration of rags and solids in municipal wastewater collection networks and in industrial wastewater applications.