china hydraulic mud pump factory

mini peristaltic pump submersible solar screw pump hydraulic screw pump used in solids control for drilling mud Feeding medium 1. This product is applicable for feeding medium which has the following properties 2.High solid content ( diameter of the biggest particle is 50mm) or no solid content 3.Medium with all viscosities ( 1mPas - 3,000,000mPas ) 4.Medium that is easy to be generated and sweeled 5.Shearing sensitive medium 6.Medium with erosion 7.Medium with/without self ubrication 8.Erosive medium ( PH = 0~ 14 ) 9.Adhesive medium 10.Toxicity hazard medium Model Diameter(mm) Speed(r/min) Flow(m³/h) Power(kw) G10-1 20 1400 0.5 0.37 G15-1 25 960 1 0.55 G20-1 32 960 1.5 0.75 G25-1 32 960 2 1.1 G30-1 40 960 3 1.5 G35-1 50 960 5 2.2 G40-1 50 960 7 3 50 720 5.5 2.2 G45-1 50 960 9 4 50 720 7 3 G50-1 65 960 13 5.5 65 720 10 4 G55-1 65 960 18 7.5 65 720 13 5.5 G65-1 80 720 30 11 G86-1 100 720 60 15

Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: Applied mud pumps in the field of oil drilling. In fact, some non-clean water pumps and mud pumps, such as sewage pumps and slurry pumps, are also commonly used when they are called.

Mud pump refers to a machine that transports mud or water and other flushing fluid into the borehole during drilling. Mud pumps are an important part of drilling equipment.

In the commonly used positive circulation drilling, it is to send the surface flushing medium—clear water, mud or polymer rinsing liquid to the bottom end of the drill bit through a high-pressure hose, faucet and drill rod center hole under a certain pressure. Cool the drill bit, remove the cut debris and transport it to the surface.

The commonly used mud pump is a piston type or a plunger type, and the crankshaft of the pump is driven by the power machine, and the crankshaft passes the crosshead to drive the piston or the plunger to reciprocate in the pump cylinder. Under the alternating action of the suction and discharge valves, the purpose of pumping and circulating the flushing liquid is achieved.

2). Adapt most third party fluid-end modules to the mud pumps, eliminating the need for drilling contractors to stock fluidend parts from several manufacturers. Supply heat-treated,internally hardened forged alloy steel modules, if the drilling contractor doesn"t specify third party fluid ends.

1). Technical Support and Production Ability: Although we are one relatively new company, but we have the most professional engineers with tens of years experience in mud pump. And we have hundreds of highly skilled workers working on the pump parts and pump assembling with numerous advanced machines. Our production ability has been siteaudited by supervising inspectorate like France BV (Bureau Veritas), DNV(Det Norske Veritas) and SGS-CSTC(Standards Technical Services Co., Ltd.)

2). Quality Assurance: Ten professional inspectors performstrict quality inspection from the initial forgings, castings, other rawmaterials, each finished machined parts until the final assembling of the pump. Each part assembled on the pump will be well tested and highly qualified. Andfor each pump finished, it will be running tested in our test center for atleast 4 hours. Quality certificate, Inspection report and testing report will beattached when pump is delivered. 12 Months quality guarantee will be offered for each pump.

3). Competitive Price:We are one of the top pump manufacturers in China. We have the greatest advantages in price. We can not offer you the lowest price in China, but most competitive price but with very good quality.

4). Quick Delivery: Usually we will keep some pump model in stock so that we can make fast delivery for clients with urgent need. For pump we do not have in stock, we can also deliver with 40 days.