directional drill mud pump quotation

tools, OCTG and other related equipment and parts. Meanwhile, BEYOND can offer technical services, personnel training and maintenance guide towards China-made drilling rigs. Only if it is what you need, BEYOND can get it for you: from best factories, with most competitive price and within shortest lead time.

The mud pump is a reciprocating plunger pump, which converts the rotation of the motor into the reciprocating linear movement of the crosshead and the piston through the crank connecting rod mechanism, and compresses the low-pressure mud into high-pressure mud. During the construction of directional drilling, the high-viscosity, high-density and high-sand-content mud is conveyed into the cave at high pressure to cool the drill bit, wash the hole wall, break the rock, and carry out cuttings when returning from the cave. It is directional One of the most important equipment for drilling construction.

Traditionally, we divide the mud pump into two parts: the hydraulic end and the power end. The power end is used to transmit power and convert movement modes and speeds. Provide suitable power for the liquid end; the liquid end is used to convert mechanical energy into liquid internal energy to transport mud.

The volume of medium discharged by the pump in a unit time is called the theoretical average displacement of the pump, which is referred to as the theoretical displacement of the pump, and is represented by Q.

The energy transferred from the power machine to the pump drive shaft per unit time is called the input power of the pump; the input power when the pump is working and the rated stroke is called the rated power of the pump, expressed in N;

The energy that the liquid increases after the action of the pump per unit time is called the effective power, also called the water power, expressed in Nr, and the efficiency of the pump is the ratio of the effective power to the input power.

Mud pump is an important equipment for directional drilling construction. It transports circulating high-pressure mud into the hole during work, flushes the hole wall, breaks the rock, cools and lubricates the drill bit, and carries the cuttings back out of the hole.

The installation position of the pump should be as low as possible, and the position of the mud pool should be increased as much as possible to improve the suction efficiency of the mud pump.

The inlet end of the suction pipe of the pump should be about 300mm higher than the bottom of the mud tank, and the inner diameter of the suction pipe must be the same.

Firmly support all suction and discharge pipelines so as not to subject them to unnecessary stress. At the same time, it is also to reduce vibration. Never let the pipeline hang on the pump due to insufficient support.

Correct and timely maintenance of the mud pump is a necessary measure to ensure the normal operation of the mud pump and prolong its life. For the use of any pump, this link should be paid attention to.

Observe the working conditions of the cylinder liner and piston. If the leaked mud is found to exceed the normal limit, new cylinder liners and pistons must be replaced.

Check whether the water in the water tank of the spray pump is sufficient and replenish it in time, replace the cooling water when it is contaminated, and clean the water tank at the same time.

It is recommended to conduct a comprehensive inspection of the entire pump every two or three years. Check whether the main bearing, eccentric wheel bearing, crosshead bearing, pinion shaft bearing are worn or damaged. If they cannot be used, they must be replaced with new ones.

Bore-Gel® fluid system is a single sack, boring fluid system specially formulated for use in horizontal directional drilling (HDD) applications. Bore Gel® system is a proprietary blended product using high-quality Wyoming sodium bentonite. When Bore-Gel® is mixed with fresh water, it develops an easy-to-pump slurry with desirable fluid properties for HDD. NSF/ANSI Standard 60 certified.

Horizontal directional drills are designed for industrial jobs that involve underground drilling. By using one of these gadgets, you can break through loose or rough soil horizontally. These drills have special hardware that makes underground paths for various purposes; you can find new and pre-owned ones for a great price on eBay.What are the functions for a horizontal directional drill?

Horizontal drills are made for installation jobs as they can power through soil without creating a trench. The bit spins rapidly using a powerful engine in order to break soil on various landscapes. You can operate a horizontal directional drill to install the following:Underground cables

All horizontal directional drills have a drill bit that rotates. The angle of the drill piece is managed by software, and users can make changes with ease without worrying about accuracy. Directional drill technology is helpful and practical because it boosts efficiency and lowers operational costs.

Since directional drills were developed in the 1920s, the main technology that impacts speed has been enhanced. However, the basic functions haven"t changed, so all directional drills have the ability to dig at various angles. The angled design is important because it helps industrial crews access precise underground spots in order to implement procedures on oil and gas reserve sites. Thanks to the unique design specs, users can drill a number of wells with one well bore, which is very beneficial as less drilling and fewer wells help the environment. eBay has directional drills that include this technology.What are the basic design specs for common HDD drills?

Because horizontal drills are made for deep underground drilling jobs, a general bit can reach a depth of around 80 feet. In order to plow underground properly without any resistance, a drill must have efficient torque, which is why many drills are manufactured with hardware that produces up to 60,000 pound-feet of torque.What are the color schemes for HDD directional drills?

The design features for various directional drills vary; however, all equipment has a color scheme that stands out in dark and dim environments. Most units will have a bright orange coat of paint or a bright yellow design. You"ll find dozens of horizontal directional drills that have orange or yellow paint with designer logos and stickers on eBay.

Interested in a trade in value or converting your equipment into cash? We buy or trade for all types of directional boring equipment including: directional drills, trailers, HDD Tooling and other HDD support equipment. We make it as easy as possible to get you the money you need for your equipment.

Specifically designed for the horizontal-drilling market, our THE pump is an upgraded, 215 BHP version of the TEE and features a cast-through studded fluid end with piston and liner sizes up to 5.5 in. for high flow rates.