godwin mud pump pricelist

The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL60 model is capable of maximum flow rates from 240 gpm (15.1 l/sec.) and discharge heads to 85 feet (25.9M). The GSL80 model is capable of maximum flow rates from 84 to 555 gpm (5.3 to 35.0 l/sec.) and discharge heads to 154 feet (47M). Like the dewatering models in the Sub-Prime line, these submersible sludge pumps are suited to tough construction, mining and industrial applications. The design features a side discharge that handles solids up to 3.2" (81mm) in diameter (GSL80) and rugged construction for long life, including a cast chromium steel impeller and heavy duty polyurethane-lined volute. Other benefits include tandem mechanical seals for dry running and extra protection against leakage, and a dual voltage junction chamber for convenient changeover in the field (GSL80).

As a Xylem/Godwin Distributor we have added to our range the HL Series of automatic Dri-Prime pumping solutions. HL Series offers high-head and jetting pumps with solids-handling capabilities and single stage impeller design. Flow ranges from 107 to 1,200 m³/h. Head through the models can reach from between 100 to 160 meters. Extreme high head pumps are also available within’ HL Series. HL Series pumps are available with Perkins, Caterpillar, Hatz, JCB and Deutz engines.

For reliability, durability and excellent performance Xylem/Godwin have the pumping solution for you. Stuart Pumps have developed a 2 or 4 wheeled trailer which will enable manoeuvrability adaption to the pump for additional cost.*

CD Series General Purpose, Solids Handling Dri-Prime® Pumps Total Head Total Head Capacity Total Head Total Head Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting...

HL Series High Head and Jetting Dri-Prime® Pumps HL80M 4" x 3" Capacity gpm Total Head ft Solids Handling Branch Sizes 440 420 400 360 220 100 150 200 250 300 Standard Engine HL4M 4" x 4" Capacity gpm Total Head ft 1000 900 700 575 450 150 200 300 350 400 Standard Mounting Length Width Height Net Weight Fuel Consumption Solids Handling Branch Sizes Standard Engine Standard Mounting Length Width Height Net Weight Fuel Consumption HL5MS Total Head ft Solids Handling Branch Sizes 1000 950 900 800 500 180 200 300 400 440 Standard Engine 1 3/8 in. 4" ASA 150 Standard John Deere 4045T 102 hp @...

Heidra® Hydraulic Submersible Pumps Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption PowerPack Pump Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Skid Base PowerPack Pump Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption PowerPack Pump Total Head Total Head Solids Handling Branch Sizes Standard Engine Standard Mounting Fuel Consumption Solids Handling Branch Sizes Standard...

What is Dri-Prime ? ® ■ A fully automatic self-priming pump. ■ Self-priming completely from dry with long suction lines. ■ Handles air/liquid mixtures. ■ Rapid priming and repriming in snore conditions. ■ Solids handling. ■ No moving parts in priming system - no need for floats and no complications. ■ Operation by unskilled personnel. ■ Simple maintenance - can be performed in the field by one person. ■ For dewatering, sewage, sewage sludge, industrial slurries and drainage, and in scavenging situations. ■ Electric drive versions are available, either with built-in compressor or arranged...

I am pleased to bring you our latest broadsheet of pumps which highlights our rental fleet of over 5,000 Dri-Prime® and other pumps and related equipment and accessories for your job site. Great products, and great people make our orange Godwin brand the first choice among customers in construction, municipalities, industry, and mining - for either rental or sale. A massive inventory of parts, plus fabricators, quality control technicians, and road mechanics back up our large rental fleet. Further supporting you are Godwin engineers and an expert field network of sales and applications...

Godwin Pumps, worldwide manufacturer and supplier of the Dri-Prime® automatic self-priming pump, features a range of automatic pump and equipment controls.

Known worldwide for introducing the Dri-Prime automatic dri-priming pump in the United States, Godwin Pumps remains at the technological forefront by developing automatic controls for its diesel and electric-driven pumpsets.

The PrimeGuard™ Controller is available on all Godwin Dri-Prime pump models with Tier III electronic diesel engines and optional on non-electronic diesel engines. The PrimeGuard Controller is a fully programmable control system that allows users to vary pump and diesel-engine speed based on input from level, flow, pressure transducers or standard floats, allowing your Dri-Prime pump to start and stop automatically without an operator. The PrimeGuard has the unique ability to set parameters and monitor the pumping system, thereby reducing labor costs associated with manning pump-watches. In addition, it can be programmed to provide maintenance reminders and operational warning alarms. For extended temporary or permanent standby applications, the PrimeGuard can be programmed to exercise the diesel-engine.

Godwin also offers Godwin Variable Frequency Drives (Godwin VFDs) which automatically vary electric motor speed to maintain wet-well level and discharge pressure. These variable speed controls, optimize system performance and increase efficiency and mechanical reliability by automatically starting and stopping using switches, transducers and SCADA remote signals and protecting against over current and temperature, short circuit, under voltage and phase loss. The Godwin VFD monitors motor conditions such as speed, torque, voltage, current and power, and mitigates the effects of waterhammer from startup and shutdown of pumpsets.

The Godwin PrimeGuard Controller and Godwin VFDs reduce wear and maintenance costs and increase pump longevity through smoother starts and stops. They also provide power savings by enabling the pump and motor speed to vary and match system demands, thereby using only the energy required.

Primarily used in applications including drinking water distribution systems, booster pump applications, pumping into sanitary force mains and pump applications that require a pump to match a pressure, level or flow condition, Godwin automatic pump controls regulate pump and engine speed to maintain a process variable, much like a Godwin VFD on an electric motor drive pump.

"We use our equipment, so we have benefitted from our first-hand knowledge and experience," said Godwin President, John Michael Paz. "The development and evolution of these controls has helped us proactively manage increasing fuel and/or power costs, while also prolonging the life of our equipment. We are pleased to extend these same benefits to our customers."

Godwin Pumps, Dri-Prime, Sub-Prime, Heidra, the phrase Think Orange. Think Godwin. Great Pumps. Great People., and the color orange for pumps are registered trademarks and DBS and PrimeGuard are trademarks of Godwin Pumps of America, Inc. All other marks belong to their respective holders.

Godwin Pumps maintains a fleet of over 6,000 portable rental pumps and 3,200 pieces of related equipment for use in dewatering in construction, mining and quarrying; in drinking water supply; and in wastewater bypasses in municipal, industrial and environmental markets. The Godwin Dri-Prime® pump features fully automatic self-priming to 28 ft, dry-running and solids handling capabilities and is complemented by a wide range and variety of electric submersible Sub-Prime®, hydraulic submersible Heidra® and gasoline-powered Wet-Prime pumps. Godwin Pumps also offers customized sales and service training to distributors.

The Godwin Dri-Prime NC350 is the largest pump in the NC line, a powerful pump offering flows to 6,530 GPM and discharge heads to 160 feet. The higher flow capabilities are ideal for wastewater applications where other pumps could clog or fail.

The NC350 features patented Flygt N-technology with an innovative self-cleaning impeller for non-clog performance. NC series pumps are engineered to deliver sustained high efficiency, lower energy and fuel costs, and reduced unplanned downtime. This makes the NC350 a best-in-class portable pump suitable for both sewage and clean water applications.

The NC350 can be customized with a diesel engine or electric motor. It is also available as a Critically Silenced unit or as a Godwin DBS for pump station backup.

The Goodwin Submersible Slurry Pump was developed for the UK mining industry and has since grown into a range of products that deliver proven performance in the most demanding environments.

Product development is performed in the UK, however all pump production manufacturing is done at our high quality, low cost manufacturing operation Goodwin India Pvt Ltd, located in Chennai, India, which was started in 2005.

Within the purpose built 70,000 sq feet factory area, submersible pumps are machined and assembled at our Indian facility, utilising the latest equipment to ensure we manufacture extremely reliable, high quality pumps.

From the initial start-up in India in 2005, there were three variants of a 30Kw 100mm pump designed and manufactured. Now that the range has been properly developed, there are five variants of 100mm, 150mm and 200mm submersible slurry pumps, two variants of ultra-reliable multistage submersible dirty water high head pumps for mine dewatering, as well as acid resistant super duplex stainless steel pumps for chemical ponds and acid leaching applications.

Goodwin submersible pumps are electrically-driven, abrasion resistant submersible pumps that are capable of pumping dense slurries containing abrasive solids within a wide range of industries.

Due to the arduous duties our submersible pumps are subject to in all locations that we service, we ensure that there is exemplary back up and support to make sure our customers’ sites remain operational; this is because it is necessary to maintain, repair and replace wear parts on pumps when pumping abrasive slurries.

As well as pumps, our companies can deliver tailored pumping solutions with custom made pontoons and slurry handling systems specifically aimed at tailings reclamation applications.