hmi hidraulic mud pump factory

The HMI HM-1 hydraulic mudjacking pump was the first concrete raising product engineered and manufactured by HMI, just over 40 years ago. It’s reliability and superior engineering maintains its place in the market, but has also acted as the springboard for other, more advanced models / options which offer various options of engine horsepower, hopper size, pumping pressure, and so much more.

Our largest, self-propelled, multi-functional pump. This rugged and durable pump is the top-of-the-line mudjacking unit. With the highest available pumping pressure, largest material hopper, most horsepower and versatility.

Our most popular model, the self-propelled, hydraulic mudjacking pump drives circles around the competition. Affordable and durable, the Power Pump is a great way to start-up or add to a concrete raising business.

Manufacturer of concrete raising equipment & mud jacking & polyurethane accessories. Distributor of used equipment. Various products include pumps, trailers, hopper trucks, gun clamps & tips, insertion guns, breakers, hammers, drills, remote controls, bins, bits, compressors, extension cords, foam, generators, grease, hose, mixers, kits, O-rings, ports, hydraulic power-packs, ramps, reactors, rigs, electric saws, material screens, switches, tires, transmitters & workbenches. Made in USA.

HMI is proud of all its innovations and products, but perhaps the greatest innovation is the Quik Mix Pro automated volumetric hopper/mixer unit. The first fully automated unit rolled off the production line in March of 2003. This slabjacking unit, when mounted on a truck body, can carry a slab raising pump, dry material, cement, and water. Along with its unique twin shafted mixer, it can automatically mix and place material into the hopper of a pump. No shoveling is required!

Expanding beyond just the slabjacking industry, in 2008 HMI developed a revolutionary new Hydraulic Power Pack 10. With a new 2 in 1 design it offers 10,000 psi at 1 ½ gallons per minute, or 3,000 psi at 9 gallons per minute. Not only is the unit great as a seperate hydraulic power pack for running hydraulic tools (mixers and mudpumps), piering contractors can use it to install helical and resistance piers.

Hydraulic Mudpumps, Inc. is committed to future refinements and development to its product line. Our future will be determined by requests from you, our customer, and the upcoming industry demands.

Centerline Manufacturing is committed to the highest level of customer service quality.  Every Centerline pump is comprehensively and repeatedly tested at diverse pressure levels to assure that it goes to our customer in perfect operational order. Centerline technicians work to ensure that our customers fully understand the operation of the model being delivered.  If a customer"s pump is down, we understand the importance of timely response and parts availability.  Centerline technicians will assess the problem and make repairs to bring the pump back into new specification. The Centerline mud pump technicians are well versed and qualified to operate and repair any product that is provided to the customer.

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. Pump seat is equipped with four skeleton oil seal and shaft sleeve, prevent shaft wear, prolong the service life of the shaft.

ATO offers high quality vertical mud pumps with thick, solid shaft and copper motor. Various models are available, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and 6 inch mud pump.

Vertical mud pump is used as suction and pouring of river mud, suitable for oil refining, construction, printing and dyeing, chemical industry and other industries.

GN Solids Control last week shipped another batch of centrifugal mud pumps and oilfield centrifuges to an international drilling company. GN Solids Control is a turnkey solids and liquid separation equipment manufacturer who has rich years of experience on design, manufacture the most cost effective solutions.

GN Solids Controlprovides 2 sets 14 inch bowldecanter centrifuge GNLW363CG to this drilling company. Usually when 2 centrifuges are using together, the first one is used to remove solids by volume and the second one is used to remove solids by particles. 2 sets GN centrifuge can be used for high gravity drilling mud or low gravity drilling mud treating, or can be used for barite recovery.

GN fix speed decanter centrifuge GNLW363CG, rotating speed can be changed by using different pulleys and belts although takes time. GN Solids Control also provides variable speed decanter centrifuge, all the main working parameters can be adjusted easily in the HMI of the VFD box, meanwhile running status and alarms are monitored.

In order to remove fine particles from the drilling mud, GNSolids Controlprovides chemical dosing unit so the solids less than 5 microns can be removed.

Besides these 2 sets GN decanter centrifuges, GN Solids Control also provides 16 sets centrifugal pumps, include 4 sets GNSB4x3C-11J, 6 sets GNSB6x5C-13J and 6 sets GNSB8x6C-14J.

GN madecentrifugal pumps are totally interchangeable with NOV Mission Magnum pump. To protect the centrifugal pump and impeller from weariness, GN Solids Control use hard ductile iron alloy.

GN centrifugal pumps are widely used to feed slurry into desander or desilter, and they can be also used in the jet mud mixing unit, or play as a trip pump.

Besides GN decanter centrifuge, centrifugal pumps, GN Solids Control is able to provide the shale shaker, vacuum pump, shaker screen, cuttings dryer as well as big oil sludge treating system, drilling mud storage plant etc.