ideco t-1300 mud pump manufacturer

Used Ideco T-1300 Triplex Mud Pump, rated to 1300 HP @ 120 strokes per minute, 5" - 7.5" pistons x 12" Stroke, pump is complete. 7.5" liners = 2428 PSI, 7" liners = 2787 PSI, 6.5" liners = 3232 PSI, 6" liners = 3797 PSI, 5.5" liners = 4514 PSI, 5" liners = 5462 PSI

Pump Parts - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Pump Parts - IDECO MM-550 Duplex Mud Pump Package, Pumps & Parts, Used Ideco MM-550 Duplex Mud Pump Package, 7 1/4" Pistons x 15" Stroke, 550 HP, c/w Quick Change Caps, Mud Gauge, Rel... More Info

Pump Parts - IDECO T-1300 Triplex Mud Pump, Pumps & Parts, Used Ideco T-1300 Triplex Mud Pump, rated to 1300 HP @ 120 strokes per minute, 5" - 7.5" pistons x 12" Stroke, pump is compl... More Info

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

We keep your mud pumps running in first class condition – providing onsite inspections, repairs and complete overhaul as well as all associated parts.

Periodically we’ll inspect for wear, cracks and damage to critical components such as bearings, bull gear and pinion, conrods and crossheads. We’ll check the condition of your seals and other rubber goods and look for oil contamination. We’ll inspect your frame and ensure your pump is set up as per the manufacturer’s recommended tolerances, providing feedback and detailed reporting.

Where overhaul is required we’ll take care of complete disassembly, cleaning and NDT. Repairs will be made to machined components as necessary. Bearings, seals and other components will be replaced in line with our inspections. Motors will be overhauled, lube systems serviced and pulsation dampeners recertified. We’ll also check your fluid ends are in spec and can repair or replace. Your pump is then fully reassembled and commissioned.