industrial replace mud pump motor pricelist

We provide a qualitative range of Mud Monoblock Pumps, which are immensely used in construction, agriculture, waste water management and many other industries

Ramnath Industrial Park, Rajkot Ramnath Industrial Park, Kothariya Ring Road, Beside Murlidhar Way Bridge Aaji dem, Near Ramvan, Ramnath Industrial Park, Rajkot - 360002, Dist. Rajkot, Gujarat

Ideco is one of the parts of a mud pump that is complete with high quality parts. This is a name that is a leading manufacturer of high quality parts of the fluid end such as the following:Modules

The Ideco pumps allow an addition in the quality trading of the replacements parts of the mud pumps and their parts that also take into account the following varieties such as:Centrifugal pumps

All of the above mentioned ingredients are found in the market and are available for better oil drilling and extraction. There are more than 1000000 varieties of inter changeable mud pump constituents and all the previously mentioned types like centrifugal pumps, parts of a rig and swivel components for the majority of the manufacturers and this includes Ideco. Their components include:Duplex pump spares

Parts of Ideco are provided with a full series of pistons for the triplex as well as duplex mud pumps. This is done for ensuring their popularity among the customers. All the manufacturers of the mud pumps and their parts make sure or try to make sure that their products and constituents are made under the certification of the American Petroleum Institute, the API. Some of them include:Bonded rubber pistons

The Bonded premium urethane piston is a single piece bonded constructed piston that does not have any joints which guarantees the prevention of leaking. The Ideco components like these eliminate the possibility of the abrasive fluids to accumulate between the liner and the piston. The expanded lip of the fluid is not damaged by faster strokes of the pump or high pressure actions. It is a fail proof piston that seals off to increased diameters as the liner keep wearing.

Parts of the mud pump like the pistons with replacement rubbers are currently running for drilling mud in the highest of pressures. It has a bonded construction as well as build without using leakage and joints. The longer size of the piston helps in guaranteeing the longevity of the equipment. The Ideco component helps the piston to function in higher pressure for ensuring a faster stroke. It is additionally resistant to the mud of the oil base as well as other additives that are put to use.

Pistons with replacement rubbers are actually the premium Ideco pistons or mud pump parts that have been serving the industry for a number of years with excellent and unparalleled performance records to suit extreme drilling conditions. This is a single piece bonded unit that has a number of benefits as it is impermeable to different kinds of chemicals as well as other kinds of oil.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Optiqua Pipes and Electricals Private Limited (herein referred as OPEPL), a wholly-owned subsidiary of La-Gajjar Machineries Private Limited (Subsidiary of Kirloskar Oil Engines Limited), as per the consent of their Board of Directors has executed Joint Venture Agreement, Share Purchase Agreement including other deeds/documents with ESVA Pumps India Private Limited, Coimbatore, Tamilnadu (herein referred as ESVA) on 31st August 2021.

OPEPL will acquire a 49% stake in the equity share capital of ESVA. ESVA is engaged in the business of manufacturing different kinds of pumps used for commercial, agricultural and domestic purposes.

Silver Pumps & Motors has established itself as a distinguished manufacturer of Premium quality, efficient, reliable and long-lasting pumps and motors for more than 40 years.

Silver Pumps has always been in constant innovation by inventing, designing, developing excellent products and we are still expanding a wide range of new products.

Piston pumps can be used for low viscosity and medium-flow media (in the range of 80 m³/h). Additionally, pumping solid particles is impossible with this type of equipment because the pump can ensure proper operation only if the seal between the cylinder and the piston is perfect.

For high-pressure uses, you can opt for a plunger pump, they differ from piston pumps in that the seal does not move with the piston, it is fixed and therefore able to withstand...

The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft.

Electric motors, motor pumps and high pressure pumps take part from the wide range of products made by Mazzoni srl. Made from robust and high-quality ...

DA Pumps are manual grease and oil, double-action piston high pressure pumps. For bearings that require an application of lubricant infrequently, the manually-operated ...

... are balanced type pumps of single vane that have fixed displacement. It has been designed for higher operation of pressure and more flow having the same size of housing.

The Osna VKI is an array of high-pressure multi-stage vertical pumps for pumping clear and slightly contaminated liquids in pressure boosting plants, cold and hot water ...

GARBARINO manufactures multistage pumps which have been widely tested in applications with pressures up to 40 bar. The newly developed GH pumps have pressures up to 85 ...

Also known as BCPs or BWCPs (Boiling Water Circulating Pumps), these sealless pumps with an integrated fluid-filled motor eliminate the need for a mechanical ...

CBF-F Series high pressure gear pump is the power component of hydraulic system. It adopts intensity Al-alloy shell,DU bearing with high loading capacity ...

Alemite H Pumps are designed for intermittent use in medium or high pressure industrial applications. Double acting H Pumps handle lightweight and fibrous lubricants.

The OSIP AS 50 is a high pressure industrial electronic pump. This device is made up of brass and is equipped with a vertical submerged stem that provides the circulation of liquid coolants ...

... utilized in industrial applications. It is capable high quality flow rates and head pressure. Its inlet and outlet threaded ports are approximately 1/2". The body uses brass and steel ...