lewco mud pump pricelist

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

Recently, mud pumps have become the most famous equipment and they play a crucial role in the oil and gas producing sectors and marine industry as well.

A mud pump is basically a drilling equipment that is broadly utilized in multiple sectors for circulating drilling mud and they need higher pressure to complete this task.

Different kinds of mud pumps are available in the market in different designs, sizes, and features. Lewco W2215 mud pumps are one of the most efficient mud pumps among all other brands. These mud pumps contain multiple excellent features and these machines’ functionality is much better than any other mud pumps.

Hence, the most popularLewco W2215 mud pump is one of the indispensable parts of the marine industry and oil and gas industries as well. By reading this article, you will get to know the multiple uses of Lewco W2215 mud pumpsas drilling equipment.

A Lewco W2215 mud pump is a kind of efficient drilling equipment that is driven by pistons and they are used for circulating drilling liquids. In addition to circulating the fluid, theLewco W2215 mud pump aids in clearing away any dirt that may have accrued at the time of drilling process.

In the marine industry, the drilling process requires some highly efficient mud pumps, that’s why Lewco mud pumps are widely used in marine industry as they are extremely efficient. Lewco mud pumps are combined with various pumps, like centrifugal pumps, and they have several wonderful features. You cannot complete the drilling process without an efficient Lewco W2215 mud pump.

Since mud pumps are able to pump drilling mud into the drill hole, they are the most significant component of the oil and gas sectors and marine sectors. These drilling equipment come in a wide variety, and each of them have various kinds of top features and uses.

Lewco W2215 mud pumps are one of the most reliable mud pumps and various different sectors are using these great drilling equipment for the drilling process. Here are some major uses of Lewco W2215mud pumps in different sectors.

One of the main uses of Lewco W2215 mud pumps is this one. Different kinds of industries like oil and gas industries, marine industries and many more are using these great mud pumps for completing the drilling operations perfectly.

This most popular use of Lewco W2215 mud pumpscannot be disregarded while discussing their many applications. Lewco W2215 mud pumps are typically employed during the well drilling operations of water to pass the water through the drilling hole. Additionally, these mud pumps are also used for washing away any type of debris.

In pipeline systems also, you can use Lewco W2215 mud pumps to clean the pipeline and prevent them from debris. The Lewco W2215 mud pumps circulate water or any other liquid through the pipeline to remove any accumulation or dirt from it and make the pipeline clean and clear. This is also a major use of Lewco W2215 mud pumpsone cannot ignore.

In order to induce fractures, high-pressure fluid is included into the rock formation at the time of the hydraulic fracturing process. To complete this procedure easily and efficiently, you have to use efficient Lewco W2215 mud pumps as these are the best option for completing this tough procedure. The fracturing liquid is circulated by the Lewco mud pump, as it helps to keep the right pressure.

Construction sector also uses the Lewco W2215 mud pumps for some purposes. These mud pumps assist in stabilizing the floor of the construction site or drain water from that particular site. This drilling equipment are also widely utilized when any large building is made. Therefore, it is also one of the common uses of Lewco W2215mud pumps.

The operation of tunnelling also involves the use of Lewco W2215 mud pumps. During the process of tunnelling, this efficient drilling equipment can convey water and clay through the drilling region. This helps keep the tunnel’s walls stable and prevents collapse. So, one cannot overlook thisgreat use of Lewco W2215 mud pumps in tunnel processing.

Sometimes, Lewco W2215 mud pumps are employed at the time of geothermal processing to transfer water or any other liquids through the drilling region. Thus, this is one of the main applications of Lewco W2215 mud pumps.

Want to purchase premium qualityLewco W2215 mud pumpsor any other mud pumps at fair cost? Then get in touch with Ababil Marine, the top drilling equipment producer and supplier in India.We manufacture extremely durable and efficient mud pumps with best quality materials. We always offer a wide variety of mud pumps of popular brands. Get the most effective mud pump for your company at an inexpensive cost.

⊙Mud pump spare parts of abroad brand:Eg. Liner, piston, valve assembly, valve seat, valve spring, valve rubber could be alternative for original with lower price.

⊙Original brand:Emsco、Gardner-Denver, National oilwell, Ideco, Brewster, Drillmec, Wirth, Ellis, Williams, OPI, Mud King, LEWCO, Halliburton, SPM, Schlumberger, Weatherford.

Cameron manufactures high-performance, robust LEWCO™ mud pumps for onshore and offshore oiland gas drilling applications. Each mud pump features a one-piece, forged and fabricated alloy steelcrankshaft for smooth operation and enhanced longevity. In addition, LEWCO mud pumps includea welded steel power frame, forged alloy steel pinions and gears and triple-redundant power endlubrication. Prior to delivery, LEWCO mud pumps are tested in our quality control facility to verifyperformance expectations.

For maximized drilling performance and efficiency, LEWCO mud pumps offer high discharge flow rates,impressive power-to-weight ratios and small footprints. Cameron can also furnish fluid end modulesto match the customer’s existing inventory. Cameron takes pride in their ability to provide integratedpump packages, including top or rear mount AC or DC electric drives, controls, manifolds, piping andaccessories. Pumps are installed on a heavy-duty skid or trailer mounted for portability.

One-Piece Forged and Fabricated Alloy Steel Crankshaft The power balanced crankshaft reduces noise and vibration and extends the life of the bearing and crankshaft life. Rather than using a multipiece bolted component, the LEWCO crankshaft is made of one-piece, forged and fabricated alloy steel construction. It is repairable to help reduce operating expense and its bearings are lubricated via drilled internal passageways for longevity.

Welded Steel Power Frame The mud pump power frame is engineered for performance, reliability and toughness. Designed for discharge pressures as high as 7500 psi, it is an independent, precision-fabricated structure of double-wall welded steel, with stiffeners and gussets for added strength and durability. As opposed to pumps mounted on an integral skid, LEWCO mud pumps come mounted on a heavy-duty oilfield skid for mobility and increased alignment capability, reducing component wear caused by internal stresses.

Triple-Redundant Power End Lubrication The LEWCO triple-redundant, filtered lubrication system includes internal gravity/splash plus internal/external force-feeding of most of its power end bearings and upper/lower crosshead slides. For protection even at low operating speeds, the system includes a gear-driven mechanical pump off the main gear and a second pump driven by an electric motor.

Fluid End Modules LEWCO fluid end modules are available in one or two-piece configurations using quenched and tempered forged steel material. Cameron can furnish fluid end modules compatible with various mud pump brands already in use, eliminating the need to stock extra spares. Fluid end expendables are off-the-shelf parts, readily available from domestic and international Cameron facilities, further minimizing the need for additional stocking.

Steel Connecting RodsThe LEWCO rolled plate, low-carbon steel connecting rods maintain precisealignment between the crankshaft and crosshead under maximum load. These rodsfeature double-row cylindrical roller bearings in the crosshead end and single rowcylindrical bearings in the crankshaft end, reducing wear and friction under severeoperating conditions.

Discharge Manifold and CrossMade of forged, heat-treated steel for ruggedness, LEWCO discharge manifolds aredesigned to provide reliable connections and easy module maintenance. The piecesare available in working pressures of 3000, 5000 and 7500 psi and in various flangeoutlet configurations with clean-out strainers. On LEWCO pumps, the single-piece,trepanned manifold mounts directly to the front or back of the fluid ends, whicheliminates connections between the discharge modules.

Developed for increased mobility, the WH-Series mud pumps deliver high performance in a compact design. Featuring small footprints and less weight, these pumps are ideal for applications where space is limited. LEWCO mud pumps feature a power balanced, single-piece forged steel crankshaft for smooth operation.

WH-1312 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.43 Rated hp (kW): 1300 (969) @ 130 Spm PUMP SPEED (Spm) 130 110 90 70 50 30 MAXIMUM INPUT HP (kW) rating 1 1300 (969) 1100 (820) 900 (671) 700 (522) 500 (373) 300 (224) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2) per revolution 6-3/4 (171.5) 2766 (194.5) 5.577 (21.108) 725 (2744) 613 (2322) 502 (1900) 390 (1478) 279 (1056) 167 (633) 6-1/2 (165.1) 2983 (209.7) 5.171 (19.574) 672 (2545) 569 (2153) 465 (1762) 362 (1370) 259 (979) 155 (587) 6 (152.4) 3501 (246.1) 4.406 (16.678) 573 (2168) 485 (1835) 397 (1501) 308 (1168) 220 (834) 132 (500) 5-1/2 (139.7) 4166 (292.9) 3.703 (14.014) 481 (1822) 407 (1542) 333 (1261) 259 (981) 185 (701) 111 (420) 5 (127.0) 5000 (351.5) 3.060 (11.582) 398 (1506) 337 (1274) 275 (1042) 214 (811) 153 (579) 92 (347)Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency1

WH-1612 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 1600 (1193) @ 120 Spm PUMP SPEED (Spm) 120 110 100 90 80 70 MAXIMUM INPUT HP (kW) rating 1 1600 (1193) 1467 (1094) 1333 (994) 1200 (895) 1067 (795) 933 (696) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 2987 (210.0) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824) 7 (177.8) 3429 (241.1) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589) 6-1/2 (165.1) 3997 (279.6) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370) 6 (152.4) 4668 (328.2) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168) 5-1/2 (139.7) 5555 (390.6) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981) 5 (127.0) 6722 (472.6) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

WH-2012 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 2000 (1491) @ 140 Spm PUMP SPEED (Spm) 140 130 120 110 100 90 MAXIMUM INPUT HP (kW) rating1 2000 (1491) 1857 (1385) 1714 (1278) 1571 (1172) 1429 (1065) 1286 (959) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 3201 (225.0) 6.885 (26.060) 964 (3649) 895 (3388) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 7 (177.8) 3674 (258.3) 5.998 (22.701) 840 (3178) 780 (2951) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 6-1/2 (165.1) 4261 (299.6) 5.171 (19.574) 724 (2741) 672 (2545) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 6 (152.4) 5001 (351.6) 4.406 (16.678) 617 (2335) 573 (2168) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 5-1/2 (139.7) 5952 (418.5) 3.703 (14.014) 518 (1962) 481 (1822) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 5 (127.0) 7202 (506.3) 3.060 (11.582) 428 (1622) 398 (1506) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 347 (1314) 322 (1220) 297 (1126) 273 (1032) 248 (938) 223 (844)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

LEWCO W-Series mud pumps are built for durability, longevity and are designed with a welded power steel frame that features supplementary steel for operational efficiency. The W-Series line includes robust, high pressure, low maintenance pumps to increase drilling performance. LEWCO mud pumps feature a power balanced, single-piece forged and fabricated alloy steel crankshaft for smooth operation.

W-1712 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 120 Spm PUMP SPEED (Spm) 120 110 100 90 80 70 MAXIMUM INPUT HP (kW) rating1 1700 (1268) 1558 (1162) 1417 (1056) 1275 (951) 1133 (845) 992 (739) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 3174 (223.2) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824) 7 (177.8) 3644 (256.2) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589) 6-1/2 (165.1) 4226 (297.1) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370) 6 (152.4) 4960 (348.7) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168) 5-1/2 (139.7) 5902 (415.0) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981) 5 (127.0) 7142 (502.1) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-1714 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 14 (355.6) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating 1 1700 (1268) 1545 (1152) 1391 (1037) 1236 (922) 1082 (807) 927 (691) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 2968 (208.7) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824) 7 (177.8) 3407 (239.5) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589) 6-1/2 (165.1) 3951 (277.8) 6.033 (22.836) 664 (2512) 603 (2284) 543 (2055) 483 (1827) 422 (1599) 362 (1370) 6 (152.4) 4637 (326.0) 5.141 (19.458) 565 (2141) 514 (1946) 463 (1751) 411 (1557) 360 (1362) 308 (1168) 5-1/2 (139.7) 5519 (388.0) 4.320 (16.350) 475 (1799) 432 (1635) 389 (1472) 346 (1308) 302 (1145) 259 (981) 5 (127.0) 6678 (469.5) 3.570 (13.512) 393 (1486) 357 (1351) 321 (1216) 286 (1081) 250 (946) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.892 (10.945) 318 (1204) 289 (1095) 260 (985) 231 (876) 202 (766) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-2214 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 14 (355.6) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 2667 (187.5) 11.567 (43.780) 1272 (4816) 1157 (4378) 1041 (3941) 925 (3503) 810 (3065) 694 (2627) 8-1/2 (215.9)3 2990 (210.2) 10.317 (39.051) 1135 (4296) 1032 (3905) 929 (3515) 825 (3124) 722 (2734) 619 (2343) 8 (203.2) 3376 (237.3) 9.139 (34.592) 1005 (3805) 914 (3459) 823 (3114) 731 (2768) 640 (2422) 548 (2076) 7-1/2 (190.5) 3841 (270.0) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824) 7 (177.8) 4409 (310.0) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589) 6-1/2 (165.1) 5114 (359.5) 6.033 (22.837) 664 (2513) 603 (2283) 543 (2055) 483 (1828) 422 (1597) 362 (1370) 6 (152.4) 6001 (421.9) 5.141 (19.460) 565 (2139) 514 (1948) 463 (1753) 411 (1556) 360 (1363) 308 (1166) 5-1/2 (139.7) 7142 (502.1) 4.320 (16.353) 475 (1798) 432 (1635) 389 (1472) 346 (1310) 302 (1143) 259 (980) 5 (127.0) 7500 (527.3) 3.570 (13.510) 393 (1487) 357 (1351) 321 (1215) 286 (1083) 250 (946) 214 (810) Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced 1

W-2215 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 15 (381.0) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating 1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 2489 (175.0) 12.393 (46.907) 1363 (5160) 1239 (4691) 1115 (4222) 991 (3753) 868 (3284) 744 (2815) 8-1/2 (215.9)3 2791 (196.2) 11.054 (41.840) 1216 (4603) 1105 (4184) 995 (3766) 884 (3348) 774 (2929) 663 (2511) 8 (203.2) 3151 (221.5) 9.792 (37.063) 1077 (4077) 979 (3707) 881 (3336) 783 (2965) 685 (2595) 588 (2224) 7-1/2 (190.5) 3585 (252.0) 8.606 (32.575) 947 (3584) 861 (3258) 775 (2932) 688 (2606) 602 (2280) 516 (1955) 7 (177.8) 4115 (289.3) 7.497 (28.376) 825 (3122) 750 (2838) 675 (2554) 600 (2270) 525 (1986) 450 (1703) 6-1/2 (165.1) 4773 (335.6) 6.464 (24.467) 711 (2692) 646 (2447) 582 (2202) 517 (1958) 452 (1713) 388 (1468) 6 (152.4) 5601 (393.8) 5.508 (20.848) 606 (2293) 551 (2085) 496 (1876) 441 (1668) 386 (1459) 330 (1251) 5-1/2 (139.7) 6666 (468.7) 4.628 (17.518) 509 (1927) 463 (1752) 417 (1577) 370 (1402) 324 (1226) 278 (1051) 5 (127.0) 7500 (527.3) 3.825 (14.478) 421 (1593) 382 (1448) 344 (1303) 306 (1158) 268 (1014) 229 (869) Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced 1

W-3000 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 16 (406.4) Gear Ratio: 4.36 Rated hp (kW): 3000 (2237) @ 100 Spm PUMP SPEED (Spm) 100 90 80 70 60 50 MAXIMUM INPUT HP (kW) rating1 3000 (2237) 2700 (2013) 2400 (1790) 2100 (1566) 1800 (1342) 1500 (1119) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 3501 (246.1) 13.219 (50.035) 1322 (5004) 1190 (4504) 1058 (4003) 925 (3503) 793 (3002) 661 (2502) 8-1/2 (215.9) 3925 (275.9) 11.791 (44.630) 1179 (4463) 1061 (4017) 943 (3571) 825 (3124) 707 (2678) 590 (2232) 8 (203.2) 4431 (311.5) 10.445 (39.533) 1044 (3954) 940 (3558) 836 (3163) 731 (2768) 627 (2372) 522 (1977) 7-1/2 (190.5) 5041 (354.4) 9.180 (34.746) 918 (3475) 826 (3127) 734 (2780) 643 (2432) 551 (2085) 459 (1737) 7 (177.8) 5787 (406.9) 7.997 (30.268) 800 (3027) 720 (2724) 640 (2422) 560 (2119) 480 (1816) 400 (1514) 6-1/2 (165.1) 6712 (471.9) 6.895 (26.098) 690 (2610) 621 (2349) 552 (2088) 483 (1827) 414 (1566) 345 (1305) 6 (152.4) 7500 (527.3) 5.875 (22.238) 588 (2224) 529 (2002) 470 (1779) 411 (1557) 353 (1334) 294 (1112)Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced1

We know that cost savings on identical spare parts is important for offshore rig Companies today. Therefore we provide our services and spare parts at considerable cost reductions compared to sourcing from the major OEMs. Tratec can guarantee identical parts with all required part certificates. We maintaing the highest quality, using state-of-the art service facilities and experienced, specialist mud pump engineers for service work.

Tratec has supplied more than 20 mud pump spare part, overhaul and recertification projects the last 5 years. References include rig companies Odfjell Drilling, Maersk Drilling, Archer, Saipem, KCA Deutag, and others.

Tratec can supply overhaul and parts compatible with the following Mud Pump makers and trademarks: National Oilwell Varco (NOV), MHWirth, Continental Emsco, Gardner Denver, Lewco, Drillmec, and others. Tratec is an independent supplier of drilling equipment parts. Tratec is neither a licensee, nor is affiliated with any of the named original equipment manufacturers (OEM). The manufacturer’s names, equipment names, or trademarks used herein are solely for identification purposes, and are not intended by Tratec to cause confusion as to the source, sponsorship, or quality of the parts supplied by Tratec. The original equipment manufacturers named above and throughout this website do not sponsor, promote, warranty or endorse Tratec’s supply of parts.

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

Mid Atlantic Pump & Equipment Companypumps are available in centrifugal, diaphragm, and submersible configurations. Engine driven self-priming pumps can be supplied with diesel or gas driven engines. All submersible pumps are supplied with controllers in outdoor enclosures.

The mud pumps market size is expected to grow at a significant rate during the forecast period. A mud pump is a large, high-pressure (up to 7500 psi), single-acting triplex reciprocating pump used to circulate mud in a well at a specific flow rate (between 100 and 1300 gallons per minute). Instead of a triplex reciprocating pump, a double-acting two-cylinder reciprocating pump is occasionally utilized as a mud pump. Typically, a rig operator keeps two or three mud pumps on hand, one of which is active and the others on standby in case of an emergency. Mud is gathered up with the use of mud pumps, which use suction to circulate the mud from the wellbore to the surface during the drilling process.

Increased demand for directional and horizontal drilling, higher pressure handling capabilities, and some new oil discoveries are the main drivers of this market"s growth. Mud pumps are specialized pumps that are used to transport and circulate drilling fluids and other related fluids in a variety of industries, including mining and onshore and offshore oil and gas. The global energy demand is boosting the market for mud pumps. However, high drilling costs, environmental concerns, and shifting government energy and power laws may stymie industry growth.

Innovation in technology is the key for further growth for example, MTeq uses Energy Recovery’s Pressure exchanger technology in the drilling industry, as the ultimate engineered solution to increase productivity and reduce operating costs in pumping process by rerouting rough fluids away from high-pressure pumps, which helps reduce the cost of maintenance for operators.

The major key player in global mud pumps market are Flowserve (U.S.), Grundfos (Denmark), Halliburton (U.S.), Sulzer (Switzerland), KSB Group (Germany), Ebara Corporation (Japan), Weir Group (U.K), and SRS Crisafulli, Inc (U.S.). Tsurumi Pump (Japan), Shijiazhuang Industrial Pump Factory Co. Ltd (China), Excellence Pump Industry Co.Ltd (China), Kirloskar Ebara Pumps Limited (India), Xylem Inc (U.S.), and Goulds Pumps (U.S.) are among others.

In the drilling business, MTeq uses Energy Recovery"s Pressure exchanger technology as the ultimate engineering solution to boost productivity and lower operating costs in the pumping process by rerouting abrasive fluids away from high-pressure pumps, which helps operators save money on maintenance. The latest trend reveals that regulatory agencies are persuading manufacturers and consumers to choose electric mud pumps over fuel engine mud pumps to reduce the environmental impact of fuel engine mud pumps.

The global mud pumps market is segmented on the basis of type (duplex pump, triplex pump, and others), component (fluid end and power end), application (oil & gas industry and building industry), and Region (North America, Europe, Asia Pacific, and Rest of the World).

Based on type, mud pumps can be segmented as duplex and triplex pumps. Triplex pumps are expected to progress because of the ~30.0% lesser weight than duplex pumps offering similar efficiency. The pump transfers the fluids with the help of mechanical movements.

Based on application, mud pumps market can be segmented as oil & gas industry and building industry. As oil and gas fields going mature, operators must drill wells with large offset, high laterals, widening their applicability by using mud motors, and high-pressure pumps. To fulfill the demand drilling companies increase their mud pumping installation capacity, with higher flexibility. For instance, LEWCO has developed W-3000 mud pump model for oil drilling, which can handle power up to 3000 HP.

Based on region, North America is predominant because of tight oil and shale gas sources, followed by Asia-Pacific due to the increased number of wells in the regions, especially in countries such as China and India due to the rapid urbanization and industrialization. Authorities in countries such as India, China are working on enhancing their production capacities for reducing the import bills, which ultimately help in the growth of mud pumps market.

This market is broadly driven by oil and gas industry as mud pumps are used to move massive amount of sludge and mud at the time of drilling. Countries such as China, Russia, Saudi Arabia, and the U.S. have the largest number of oil wells. The demand for mud pumps will increase with the number of oil wells, across the globe.

On the other hand, lewco mud pumps come in different sizes to can be operated by electric water, solar water pump, and semi-automatic. Because of the type of mud pumps, it is important to consider the design of the mud pumps as they are powered by electric water, and as a name, it is important to consider a long-lasting usage of the water. In addition to the two types of lewco mud pumps, one is the most important choice among them. Lewco mud pumps and different electric mud pumps are one of the most commonly found types.@@@@@

As a result, they are designed in different sizes, patterns and designs. There are many lewco mud pumps with different sizes, on top of a all-purpose design, and also designed for different cleaning and maintenance. Some lewco mud pumps with compressed air are also available in a range of sizes.@@@@@

A lewco mud pumps are a cleaner, as it will keep less dirt on the surface. It is also designed to keep the debris clean, and it pushes clean pits without the need of debris. On the other hand, a lewco water pumps also clean the pits, irrigation systems will avoid water from seeping the pumps into the pits. It is additionally designed to clean the debris, and it pushes out clean pits.@@@@@

It can also keep the cleaned debris in the future. A lewco mud pumping is efficiently designed, allowing it to clean up debris in the future, and it will also prevent spillage from happening. The lewco mud pumping is efficiently designed, and it can therefore keep more cleaned debris in the future.