lewco mud pump p n a167706 supplier

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

On the other hand, lewco mud pumps come in different sizes to can be operated by electric water, solar water pump, and semi-automatic. Because of the type of mud pumps, it is important to consider the design of the mud pumps as they are powered by electric water, and as a name, it is important to consider a long-lasting usage of the water. In addition to the two types of lewco mud pumps, one is the most important choice among them. Lewco mud pumps and different electric mud pumps are one of the most commonly found types.@@@@@

As a result, they are designed in different sizes, patterns and designs. There are many lewco mud pumps with different sizes, on top of a all-purpose design, and also designed for different cleaning and maintenance. Some lewco mud pumps with compressed air are also available in a range of sizes.@@@@@

A lewco mud pumps are a cleaner, as it will keep less dirt on the surface. It is also designed to keep the debris clean, and it pushes clean pits without the need of debris. On the other hand, a lewco water pumps also clean the pits, irrigation systems will avoid water from seeping the pumps into the pits. It is additionally designed to clean the debris, and it pushes out clean pits.@@@@@

It can also keep the cleaned debris in the future. A lewco mud pumping is efficiently designed, allowing it to clean up debris in the future, and it will also prevent spillage from happening. The lewco mud pumping is efficiently designed, and it can therefore keep more cleaned debris in the future.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

VigorPetro.now offers a full line of premium expendables and service parts for all well-known makes and models of mud pumps that are currently in operation worldwide. These items include various styles of valves, pistons, liners, piston rods, and wear plates, as well as all fluid end seals and gaskets. We also offer a complete selection of fluid cylinder modules and major service components, such as crankshaft assemblies, gear sets,bearings, and connecting rods.

These parts combine the finest materials and manufacturing expertise, including the premium service and support that VigorPetro. has historically provided all our clients. The result is the best performing products available from any manufacturer. Whether you are running Brewster, Emsco, Ideco, Gardner-Denver, National, Oilwell, LEWCO, or Wirth pumps in your rig feet, VigorPetro is now a one-stop shop that can supply all the parts needed to keep these pumps running daily.

Houston, Texas -- To eliminate equipment compatibility issues and the prospect of additional spare-parts inventories for drilling contractors, the LeTourneau Ellis Williams Company (LEWCO) can factory-equip its heavy-duty W-Series and general-duty WH-Series mud pumps with virtually any major brand of fluid end module. Customers not specifying a particular brand receive LEWCO"s standard one-piece or two-piece fluid end modules made of quenched and tempered forged steel, featuring "off the shelf" expendables readily available from domestic and international sources.

LEWCO mud pumps are in-house manufactured. For maximum quality assurance -- with job-ready performance verified in advance -- every pump is tested under full load prior to shipment, in the company"s fully equipped, million-dollar "mud pump laboratory." LEWCO pumps provide input ratings of 300 to 3,000 horsepower (224 kW to 2,237 kW) and deep-drilling discharge pressures as great as 7,500 pounds per square inch (527 kg/cm2). Their premium components include a pressurized lubrication system that force-feeds lubricant to all power-end bearings including upper and lower crosshead slides; a balanced forged steel crankshaft that reduces noise and vibration and helps extend component life throughout the pump; and a robust frame of double-wall, welded-steel, mounted on a heavy-duty oilfield skid.

The LeTourneau Ellis Williams Company builds high-performance mud pumps for oil and gas drilling (on land and offshore), petroleum production and processing, well-servicing, and horizontal directional drilling; as well as ancillary drilling products including pulsation dampeners; drawworks; rotary tables, transmissions, and drives; and swivels. Located in Houston, Texas, LEWCO is a wholly owned subsidiary of LeTourneau Incorporated, a leading manufacturer of self-elevating offshore drilling rigs, forestry equipment, and wheel loaders.

For more information, contact the LEWCO Sales Department at 6500 Brittmoore Road, Houston, TX 77241-1343; telephone 1-888-MUD-PUMP (683-7867), fax 713-856-5341; e-mail pumps@lewco-equip.com. Or visit www.lewco-equip.com.

We are a supplier of aftermarket mud pump parts. Whether it’s a duplex or triplex pump, we offer a complete line of parts and spares that interchange with most brands. We supply everything from chrome and ceramic liners, seals, crankshafts, pistons and modules and everything in between.

LEWCO is the producer of industrial pumps. The company started producing Ellis Williams pumps since 1974. We use industrial pumps in our pumping units, high pressure pump and mix pump units.

Pumping units are used to pump drilling fluids to the drill rig during a horizontal or vertical drilling. Our units are built to pump bentonite based liquids, grout and other drilling fluids. Our range of pumping units varies in capacity of 10 up to 3500 liters per minute and up to 150 bar.

Ellis Williams / LEWCO / EWCO Pumps are not a standard in our units. The time of delivery is too long and the transport costs are too high. On customers request we do built them in our units. Therefor we service them and have all wear parts available. Last year we purchased 2 Ellis Williams pumps, type 446 high and a type 440, both pumps received a complete overhauling and were used to construct our rental high pressure pumping unit P2500D and P2500E.

The Ellis Williams Company, Inc. (EWCO), Houston, Texas, is a manufacturer of premium reciprocating mud pumps, which are used in oilfield drilling and Horizontal directional drillings. The founder, Mr. Ellis Williams, is a pioneer in mud pump design and manufacture. EWCO was owned by Michael and Shirley Williams, and Bob and Ken Gibbs. The owners engaged DAG to find a buyer with two objectives in mind – shareholder liquidity and the ability to expand the EWCO pump line. After an extensive search, DAG negotiated the sale of EWCO to Rowan Companies, Inc. (NYSE:RDC) subsidiary LeTourneau, Inc. EWCO was sold at an attractive multiple which was well received by each shareholder. Management stayed in place through a transition period.

The Ellis Williams Company (EWCO) is renamed to LEWCO, because of LeTourneau Technologies Drilling Systems, Inc. The Company has been renamed LEWCO and has greatly expanded in its operations under the Rowan / LeTourneau ownership. Mr. Ellis Williams still serves as a consultant to LEWCO and realized one of his career dreams when the first EWCO 3,000 horsepower pump was completed in early 2002

We do have all LEWCO / EWCO / Ellis Williams parts available and in stock and ready to be shipped in Europe or elsewhere. This can be original and OEM parts, however the customer wishes.

Parts like a stuffing box, Impeller, Valves, Diffuser, Plate and filters, o-ring, packing, nozzle, casing, liners, pistons, discharge nozzles are common used wear parts and we have them on stock.