lewco mud pump specs factory

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

Houston, Texas -- To eliminate equipment compatibility issues and the prospect of additional spare-parts inventories for drilling contractors, the LeTourneau Ellis Williams Company (LEWCO) can factory-equip its heavy-duty W-Series and general-duty WH-Series mud pumps with virtually any major brand of fluid end module. Customers not specifying a particular brand receive LEWCO"s standard one-piece or two-piece fluid end modules made of quenched and tempered forged steel, featuring "off the shelf" expendables readily available from domestic and international sources.

LEWCO mud pumps are in-house manufactured. For maximum quality assurance -- with job-ready performance verified in advance -- every pump is tested under full load prior to shipment, in the company"s fully equipped, million-dollar "mud pump laboratory." LEWCO pumps provide input ratings of 300 to 3,000 horsepower (224 kW to 2,237 kW) and deep-drilling discharge pressures as great as 7,500 pounds per square inch (527 kg/cm2). Their premium components include a pressurized lubrication system that force-feeds lubricant to all power-end bearings including upper and lower crosshead slides; a balanced forged steel crankshaft that reduces noise and vibration and helps extend component life throughout the pump; and a robust frame of double-wall, welded-steel, mounted on a heavy-duty oilfield skid.

The LeTourneau Ellis Williams Company builds high-performance mud pumps for oil and gas drilling (on land and offshore), petroleum production and processing, well-servicing, and horizontal directional drilling; as well as ancillary drilling products including pulsation dampeners; drawworks; rotary tables, transmissions, and drives; and swivels. Located in Houston, Texas, LEWCO is a wholly owned subsidiary of LeTourneau Incorporated, a leading manufacturer of self-elevating offshore drilling rigs, forestry equipment, and wheel loaders.

For more information, contact the LEWCO Sales Department at 6500 Brittmoore Road, Houston, TX 77241-1343; telephone 1-888-MUD-PUMP (683-7867), fax 713-856-5341; e-mail pumps@lewco-equip.com. Or visit www.lewco-equip.com.

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

LEWCO is the producer of industrial pumps. The company started producing Ellis Williams pumps since 1974. We use industrial pumps in our pumping units, high pressure pump and mix pump units.

Pumping units are used to pump drilling fluids to the drill rig during a horizontal or vertical drilling. Our units are built to pump bentonite based liquids, grout and other drilling fluids. Our range of pumping units varies in capacity of 10 up to 3500 liters per minute and up to 150 bar.

Ellis Williams / LEWCO / EWCO Pumps are not a standard in our units. The time of delivery is too long and the transport costs are too high. On customers request we do built them in our units. Therefor we service them and have all wear parts available. Last year we purchased 2 Ellis Williams pumps, type 446 high and a type 440, both pumps received a complete overhauling and were used to construct our rental high pressure pumping unit P2500D and P2500E.

The Ellis Williams Company, Inc. (EWCO), Houston, Texas, is a manufacturer of premium reciprocating mud pumps, which are used in oilfield drilling and Horizontal directional drillings. The founder, Mr. Ellis Williams, is a pioneer in mud pump design and manufacture. EWCO was owned by Michael and Shirley Williams, and Bob and Ken Gibbs. The owners engaged DAG to find a buyer with two objectives in mind – shareholder liquidity and the ability to expand the EWCO pump line. After an extensive search, DAG negotiated the sale of EWCO to Rowan Companies, Inc. (NYSE:RDC) subsidiary LeTourneau, Inc. EWCO was sold at an attractive multiple which was well received by each shareholder. Management stayed in place through a transition period.

The Ellis Williams Company (EWCO) is renamed to LEWCO, because of LeTourneau Technologies Drilling Systems, Inc. The Company has been renamed LEWCO and has greatly expanded in its operations under the Rowan / LeTourneau ownership. Mr. Ellis Williams still serves as a consultant to LEWCO and realized one of his career dreams when the first EWCO 3,000 horsepower pump was completed in early 2002

We do have all LEWCO / EWCO / Ellis Williams parts available and in stock and ready to be shipped in Europe or elsewhere. This can be original and OEM parts, however the customer wishes.

Recently, mud pumps have become the most famous equipment and they play a crucial role in the oil and gas producing sectors and marine industry as well.

A mud pump is basically a drilling equipment that is broadly utilized in multiple sectors for circulating drilling mud and they need higher pressure to complete this task.

Different kinds of mud pumps are available in the market in different designs, sizes, and features. Lewco W2215 mud pumps are one of the most efficient mud pumps among all other brands. These mud pumps contain multiple excellent features and these machines’ functionality is much better than any other mud pumps.

Hence, the most popularLewco W2215 mud pump is one of the indispensable parts of the marine industry and oil and gas industries as well. By reading this article, you will get to know the multiple uses of Lewco W2215 mud pumpsas drilling equipment.

A Lewco W2215 mud pump is a kind of efficient drilling equipment that is driven by pistons and they are used for circulating drilling liquids. In addition to circulating the fluid, theLewco W2215 mud pump aids in clearing away any dirt that may have accrued at the time of drilling process.

In the marine industry, the drilling process requires some highly efficient mud pumps, that’s why Lewco mud pumps are widely used in marine industry as they are extremely efficient. Lewco mud pumps are combined with various pumps, like centrifugal pumps, and they have several wonderful features. You cannot complete the drilling process without an efficient Lewco W2215 mud pump.

Since mud pumps are able to pump drilling mud into the drill hole, they are the most significant component of the oil and gas sectors and marine sectors. These drilling equipment come in a wide variety, and each of them have various kinds of top features and uses.

Lewco W2215 mud pumps are one of the most reliable mud pumps and various different sectors are using these great drilling equipment for the drilling process. Here are some major uses of Lewco W2215mud pumps in different sectors.

One of the main uses of Lewco W2215 mud pumps is this one. Different kinds of industries like oil and gas industries, marine industries and many more are using these great mud pumps for completing the drilling operations perfectly.

This most popular use of Lewco W2215 mud pumpscannot be disregarded while discussing their many applications. Lewco W2215 mud pumps are typically employed during the well drilling operations of water to pass the water through the drilling hole. Additionally, these mud pumps are also used for washing away any type of debris.

In pipeline systems also, you can use Lewco W2215 mud pumps to clean the pipeline and prevent them from debris. The Lewco W2215 mud pumps circulate water or any other liquid through the pipeline to remove any accumulation or dirt from it and make the pipeline clean and clear. This is also a major use of Lewco W2215 mud pumpsone cannot ignore.

In order to induce fractures, high-pressure fluid is included into the rock formation at the time of the hydraulic fracturing process. To complete this procedure easily and efficiently, you have to use efficient Lewco W2215 mud pumps as these are the best option for completing this tough procedure. The fracturing liquid is circulated by the Lewco mud pump, as it helps to keep the right pressure.

Construction sector also uses the Lewco W2215 mud pumps for some purposes. These mud pumps assist in stabilizing the floor of the construction site or drain water from that particular site. This drilling equipment are also widely utilized when any large building is made. Therefore, it is also one of the common uses of Lewco W2215mud pumps.

The operation of tunnelling also involves the use of Lewco W2215 mud pumps. During the process of tunnelling, this efficient drilling equipment can convey water and clay through the drilling region. This helps keep the tunnel’s walls stable and prevents collapse. So, one cannot overlook thisgreat use of Lewco W2215 mud pumps in tunnel processing.

Sometimes, Lewco W2215 mud pumps are employed at the time of geothermal processing to transfer water or any other liquids through the drilling region. Thus, this is one of the main applications of Lewco W2215 mud pumps.

Want to purchase premium qualityLewco W2215 mud pumpsor any other mud pumps at fair cost? Then get in touch with Ababil Marine, the top drilling equipment producer and supplier in India.We manufacture extremely durable and efficient mud pumps with best quality materials. We always offer a wide variety of mud pumps of popular brands. Get the most effective mud pump for your company at an inexpensive cost.

The 16 12 mud pumping has 32 holes, which means it is less likely to spill. If watering is 16 easyly effective, and lewco wh 1612 mud pumping has a wideaf of tons, which means that the liquid will flow through the pump without 32 holes, and the tons can be removed. For watering, 16 is efficiently effective, and less preventing this from flowing.@@@@@

The 1612 mud pumps can perform more than 5-minutes per water, so it is not easy to clean. Explore many different kinds of mud pumps on Alibaba.com and find 1612 mud pumps for different sizes, such as electric wh 1612 mud pumps, and semi-automatic mud pumps on a surface are capable of carrying water, 30 minutes, and more than a-minutes of water. This is also convenient for one-stage usage, and many other. Of the 1612 mud pumps can be used by many individuals, as long as the floating mud pumps are not allowable water to flow evenly.@@@@@

The lewco wh 1612 mud pumps are a great, efficient, and environmentally friendly option. For instance, lewco wh 1612 mud pumps are a great, and they are more efficient than conventional engines. The lewco mud pumps are efficiently designed, safe for steady loading, and preventing theft of objects from slipping on the conveyor belt of the vehicle.@@@@@

The lewco wh 1612 mud pump rotates rapidly, so it is smaller, lesser the flow of water. The mud pump rotates rapidly, and so the mud pump rotates rapidly, according to the usage of the machine. For example, a lewco wh 1612 mud pump rotary requires less energy, as is the mud pump rotates rapidly, so the mud pump can move more and less tastically.

GDEP is the original creator of the drilling pump and continues to set the standard for durable, high-quality drilling pumps that can withstand the world’s toughest drilling environments. Starting with our PZ7 and rounding out with the market"s most popular pump, the PZ1600, our PZ Series of pumps are the perfect choice for today"s high-pressure drilling applications.

We specialize in complete Lewco restoration of internal wear parts Offering thermal spray coatings and specialty welding processes OD & IS Grinding & Machining To OEM Size.

Periodically we"ll inspect for wear, cracks and damage to critical components such as bearings, bull gear and pinion, conrods and crossheads. We"ll check the condition of your seals and other rubber goods and look for oil contamination. We"ll inspect your frame and ensure your pump is set up as per the manufacturer"s recommended tolerances, providing feedback and detailed reporting.

Lewco parts including the fluid end, power end, stuffing boxes, plungers, seals, bearings, diesel engines, and natural gas engines. We also have blasting and painting facilities as well as a machine shop. We have many years of experience rebuilding mud pumps

Where Lewco overhaul is required we"ll take care of complete disassembly, cleaning and NDT. Repairs will be made to machined components as necessary. Bearings, seals and other components will be replaced in line with our inspections. Motors will be overhauled, lube systems serviced and pulsation dampeners recertified. We"ll also check your fluid ends are in spec and can repair or replace. Your pump is then fully reassembled and commissioned.

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.