lewco mud pump specs brands

Houston, Texas -- To eliminate equipment compatibility issues and the prospect of additional spare-parts inventories for drilling contractors, the LeTourneau Ellis Williams Company (LEWCO) can factory-equip its heavy-duty W-Series and general-duty WH-Series mud pumps with virtually any major brand of fluid end module. Customers not specifying a particular brand receive LEWCO"s standard one-piece or two-piece fluid end modules made of quenched and tempered forged steel, featuring "off the shelf" expendables readily available from domestic and international sources.

LEWCO mud pumps are in-house manufactured. For maximum quality assurance -- with job-ready performance verified in advance -- every pump is tested under full load prior to shipment, in the company"s fully equipped, million-dollar "mud pump laboratory." LEWCO pumps provide input ratings of 300 to 3,000 horsepower (224 kW to 2,237 kW) and deep-drilling discharge pressures as great as 7,500 pounds per square inch (527 kg/cm2). Their premium components include a pressurized lubrication system that force-feeds lubricant to all power-end bearings including upper and lower crosshead slides; a balanced forged steel crankshaft that reduces noise and vibration and helps extend component life throughout the pump; and a robust frame of double-wall, welded-steel, mounted on a heavy-duty oilfield skid.

The LeTourneau Ellis Williams Company builds high-performance mud pumps for oil and gas drilling (on land and offshore), petroleum production and processing, well-servicing, and horizontal directional drilling; as well as ancillary drilling products including pulsation dampeners; drawworks; rotary tables, transmissions, and drives; and swivels. Located in Houston, Texas, LEWCO is a wholly owned subsidiary of LeTourneau Incorporated, a leading manufacturer of self-elevating offshore drilling rigs, forestry equipment, and wheel loaders.

For more information, contact the LEWCO Sales Department at 6500 Brittmoore Road, Houston, TX 77241-1343; telephone 1-888-MUD-PUMP (683-7867), fax 713-856-5341; e-mail pumps@lewco-equip.com. Or visit www.lewco-equip.com.

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

Cameron manufactures high-performance, robust LEWCO™ mud pumps for onshore and offshore oiland gas drilling applications. Each mud pump features a one-piece, forged and fabricated alloy steelcrankshaft for smooth operation and enhanced longevity. In addition, LEWCO mud pumps includea welded steel power frame, forged alloy steel pinions and gears and triple-redundant power endlubrication. Prior to delivery, LEWCO mud pumps are tested in our quality control facility to verifyperformance expectations.

For maximized drilling performance and efficiency, LEWCO mud pumps offer high discharge flow rates,impressive power-to-weight ratios and small footprints. Cameron can also furnish fluid end modulesto match the customer’s existing inventory. Cameron takes pride in their ability to provide integratedpump packages, including top or rear mount AC or DC electric drives, controls, manifolds, piping andaccessories. Pumps are installed on a heavy-duty skid or trailer mounted for portability.

One-Piece Forged and Fabricated Alloy Steel Crankshaft The power balanced crankshaft reduces noise and vibration and extends the life of the bearing and crankshaft life. Rather than using a multipiece bolted component, the LEWCO crankshaft is made of one-piece, forged and fabricated alloy steel construction. It is repairable to help reduce operating expense and its bearings are lubricated via drilled internal passageways for longevity.

Welded Steel Power Frame The mud pump power frame is engineered for performance, reliability and toughness. Designed for discharge pressures as high as 7500 psi, it is an independent, precision-fabricated structure of double-wall welded steel, with stiffeners and gussets for added strength and durability. As opposed to pumps mounted on an integral skid, LEWCO mud pumps come mounted on a heavy-duty oilfield skid for mobility and increased alignment capability, reducing component wear caused by internal stresses.

Triple-Redundant Power End Lubrication The LEWCO triple-redundant, filtered lubrication system includes internal gravity/splash plus internal/external force-feeding of most of its power end bearings and upper/lower crosshead slides. For protection even at low operating speeds, the system includes a gear-driven mechanical pump off the main gear and a second pump driven by an electric motor.

Fluid End Modules LEWCO fluid end modules are available in one or two-piece configurations using quenched and tempered forged steel material. Cameron can furnish fluid end modules compatible with various mud pump brands already in use, eliminating the need to stock extra spares. Fluid end expendables are off-the-shelf parts, readily available from domestic and international Cameron facilities, further minimizing the need for additional stocking.

Steel Connecting RodsThe LEWCO rolled plate, low-carbon steel connecting rods maintain precisealignment between the crankshaft and crosshead under maximum load. These rodsfeature double-row cylindrical roller bearings in the crosshead end and single rowcylindrical bearings in the crankshaft end, reducing wear and friction under severeoperating conditions.

Discharge Manifold and CrossMade of forged, heat-treated steel for ruggedness, LEWCO discharge manifolds aredesigned to provide reliable connections and easy module maintenance. The piecesare available in working pressures of 3000, 5000 and 7500 psi and in various flangeoutlet configurations with clean-out strainers. On LEWCO pumps, the single-piece,trepanned manifold mounts directly to the front or back of the fluid ends, whicheliminates connections between the discharge modules.

Developed for increased mobility, the WH-Series mud pumps deliver high performance in a compact design. Featuring small footprints and less weight, these pumps are ideal for applications where space is limited. LEWCO mud pumps feature a power balanced, single-piece forged steel crankshaft for smooth operation.

WH-1312 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.43 Rated hp (kW): 1300 (969) @ 130 Spm PUMP SPEED (Spm) 130 110 90 70 50 30 MAXIMUM INPUT HP (kW) rating 1 1300 (969) 1100 (820) 900 (671) 700 (522) 500 (373) 300 (224) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2) per revolution 6-3/4 (171.5) 2766 (194.5) 5.577 (21.108) 725 (2744) 613 (2322) 502 (1900) 390 (1478) 279 (1056) 167 (633) 6-1/2 (165.1) 2983 (209.7) 5.171 (19.574) 672 (2545) 569 (2153) 465 (1762) 362 (1370) 259 (979) 155 (587) 6 (152.4) 3501 (246.1) 4.406 (16.678) 573 (2168) 485 (1835) 397 (1501) 308 (1168) 220 (834) 132 (500) 5-1/2 (139.7) 4166 (292.9) 3.703 (14.014) 481 (1822) 407 (1542) 333 (1261) 259 (981) 185 (701) 111 (420) 5 (127.0) 5000 (351.5) 3.060 (11.582) 398 (1506) 337 (1274) 275 (1042) 214 (811) 153 (579) 92 (347)Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency1

WH-1612 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 1600 (1193) @ 120 Spm PUMP SPEED (Spm) 120 110 100 90 80 70 MAXIMUM INPUT HP (kW) rating 1 1600 (1193) 1467 (1094) 1333 (994) 1200 (895) 1067 (795) 933 (696) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 2987 (210.0) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824) 7 (177.8) 3429 (241.1) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589) 6-1/2 (165.1) 3997 (279.6) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370) 6 (152.4) 4668 (328.2) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168) 5-1/2 (139.7) 5555 (390.6) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981) 5 (127.0) 6722 (472.6) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

WH-2012 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 2000 (1491) @ 140 Spm PUMP SPEED (Spm) 140 130 120 110 100 90 MAXIMUM INPUT HP (kW) rating1 2000 (1491) 1857 (1385) 1714 (1278) 1571 (1172) 1429 (1065) 1286 (959) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 3201 (225.0) 6.885 (26.060) 964 (3649) 895 (3388) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 7 (177.8) 3674 (258.3) 5.998 (22.701) 840 (3178) 780 (2951) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 6-1/2 (165.1) 4261 (299.6) 5.171 (19.574) 724 (2741) 672 (2545) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 6 (152.4) 5001 (351.6) 4.406 (16.678) 617 (2335) 573 (2168) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 5-1/2 (139.7) 5952 (418.5) 3.703 (14.014) 518 (1962) 481 (1822) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 5 (127.0) 7202 (506.3) 3.060 (11.582) 428 (1622) 398 (1506) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 347 (1314) 322 (1220) 297 (1126) 273 (1032) 248 (938) 223 (844)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

LEWCO W-Series mud pumps are built for durability, longevity and are designed with a welded power steel frame that features supplementary steel for operational efficiency. The W-Series line includes robust, high pressure, low maintenance pumps to increase drilling performance. LEWCO mud pumps feature a power balanced, single-piece forged and fabricated alloy steel crankshaft for smooth operation.

W-1712 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 120 Spm PUMP SPEED (Spm) 120 110 100 90 80 70 MAXIMUM INPUT HP (kW) rating1 1700 (1268) 1558 (1162) 1417 (1056) 1275 (951) 1133 (845) 992 (739) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 3174 (223.2) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824) 7 (177.8) 3644 (256.2) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589) 6-1/2 (165.1) 4226 (297.1) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370) 6 (152.4) 4960 (348.7) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168) 5-1/2 (139.7) 5902 (415.0) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981) 5 (127.0) 7142 (502.1) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-1714 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 14 (355.6) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating 1 1700 (1268) 1545 (1152) 1391 (1037) 1236 (922) 1082 (807) 927 (691) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 2968 (208.7) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824) 7 (177.8) 3407 (239.5) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589) 6-1/2 (165.1) 3951 (277.8) 6.033 (22.836) 664 (2512) 603 (2284) 543 (2055) 483 (1827) 422 (1599) 362 (1370) 6 (152.4) 4637 (326.0) 5.141 (19.458) 565 (2141) 514 (1946) 463 (1751) 411 (1557) 360 (1362) 308 (1168) 5-1/2 (139.7) 5519 (388.0) 4.320 (16.350) 475 (1799) 432 (1635) 389 (1472) 346 (1308) 302 (1145) 259 (981) 5 (127.0) 6678 (469.5) 3.570 (13.512) 393 (1486) 357 (1351) 321 (1216) 286 (1081) 250 (946) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.892 (10.945) 318 (1204) 289 (1095) 260 (985) 231 (876) 202 (766) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-2214 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 14 (355.6) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 2667 (187.5) 11.567 (43.780) 1272 (4816) 1157 (4378) 1041 (3941) 925 (3503) 810 (3065) 694 (2627) 8-1/2 (215.9)3 2990 (210.2) 10.317 (39.051) 1135 (4296) 1032 (3905) 929 (3515) 825 (3124) 722 (2734) 619 (2343) 8 (203.2) 3376 (237.3) 9.139 (34.592) 1005 (3805) 914 (3459) 823 (3114) 731 (2768) 640 (2422) 548 (2076) 7-1/2 (190.5) 3841 (270.0) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824) 7 (177.8) 4409 (310.0) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589) 6-1/2 (165.1) 5114 (359.5) 6.033 (22.837) 664 (2513) 603 (2283) 543 (2055) 483 (1828) 422 (1597) 362 (1370) 6 (152.4) 6001 (421.9) 5.141 (19.460) 565 (2139) 514 (1948) 463 (1753) 411 (1556) 360 (1363) 308 (1166) 5-1/2 (139.7) 7142 (502.1) 4.320 (16.353) 475 (1798) 432 (1635) 389 (1472) 346 (1310) 302 (1143) 259 (980) 5 (127.0) 7500 (527.3) 3.570 (13.510) 393 (1487) 357 (1351) 321 (1215) 286 (1083) 250 (946) 214 (810) Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced 1

W-2215 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 15 (381.0) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating 1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 2489 (175.0) 12.393 (46.907) 1363 (5160) 1239 (4691) 1115 (4222) 991 (3753) 868 (3284) 744 (2815) 8-1/2 (215.9)3 2791 (196.2) 11.054 (41.840) 1216 (4603) 1105 (4184) 995 (3766) 884 (3348) 774 (2929) 663 (2511) 8 (203.2) 3151 (221.5) 9.792 (37.063) 1077 (4077) 979 (3707) 881 (3336) 783 (2965) 685 (2595) 588 (2224) 7-1/2 (190.5) 3585 (252.0) 8.606 (32.575) 947 (3584) 861 (3258) 775 (2932) 688 (2606) 602 (2280) 516 (1955) 7 (177.8) 4115 (289.3) 7.497 (28.376) 825 (3122) 750 (2838) 675 (2554) 600 (2270) 525 (1986) 450 (1703) 6-1/2 (165.1) 4773 (335.6) 6.464 (24.467) 711 (2692) 646 (2447) 582 (2202) 517 (1958) 452 (1713) 388 (1468) 6 (152.4) 5601 (393.8) 5.508 (20.848) 606 (2293) 551 (2085) 496 (1876) 441 (1668) 386 (1459) 330 (1251) 5-1/2 (139.7) 6666 (468.7) 4.628 (17.518) 509 (1927) 463 (1752) 417 (1577) 370 (1402) 324 (1226) 278 (1051) 5 (127.0) 7500 (527.3) 3.825 (14.478) 421 (1593) 382 (1448) 344 (1303) 306 (1158) 268 (1014) 229 (869) Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced 1

W-3000 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 16 (406.4) Gear Ratio: 4.36 Rated hp (kW): 3000 (2237) @ 100 Spm PUMP SPEED (Spm) 100 90 80 70 60 50 MAXIMUM INPUT HP (kW) rating1 3000 (2237) 2700 (2013) 2400 (1790) 2100 (1566) 1800 (1342) 1500 (1119) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 3501 (246.1) 13.219 (50.035) 1322 (5004) 1190 (4504) 1058 (4003) 925 (3503) 793 (3002) 661 (2502) 8-1/2 (215.9) 3925 (275.9) 11.791 (44.630) 1179 (4463) 1061 (4017) 943 (3571) 825 (3124) 707 (2678) 590 (2232) 8 (203.2) 4431 (311.5) 10.445 (39.533) 1044 (3954) 940 (3558) 836 (3163) 731 (2768) 627 (2372) 522 (1977) 7-1/2 (190.5) 5041 (354.4) 9.180 (34.746) 918 (3475) 826 (3127) 734 (2780) 643 (2432) 551 (2085) 459 (1737) 7 (177.8) 5787 (406.9) 7.997 (30.268) 800 (3027) 720 (2724) 640 (2422) 560 (2119) 480 (1816) 400 (1514) 6-1/2 (165.1) 6712 (471.9) 6.895 (26.098) 690 (2610) 621 (2349) 552 (2088) 483 (1827) 414 (1566) 345 (1305) 6 (152.4) 7500 (527.3) 5.875 (22.238) 588 (2224) 529 (2002) 470 (1779) 411 (1557) 353 (1334) 294 (1112)Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced1

Premium Oilfield Technologies takes the responsibility of listening to our clients’ concerns very seriously. Acting on those needs enables Premium to offer robust solutions to customer issues at the rig. The Caliber® DS-7500 Fluid Ends bring together our years of field experience and unmatched client interface to represent the NEW standard for your Gardner Denver pumps.

Recently, mud pumps have become the most famous equipment and they play a crucial role in the oil and gas producing sectors and marine industry as well.

A mud pump is basically a drilling equipment that is broadly utilized in multiple sectors for circulating drilling mud and they need higher pressure to complete this task.

Different kinds of mud pumps are available in the market in different designs, sizes, and features. Lewco W2215 mud pumps are one of the most efficient mud pumps among all other brands. These mud pumps contain multiple excellent features and these machines’ functionality is much better than any other mud pumps.

Hence, the most popularLewco W2215 mud pump is one of the indispensable parts of the marine industry and oil and gas industries as well. By reading this article, you will get to know the multiple uses of Lewco W2215 mud pumpsas drilling equipment.

A Lewco W2215 mud pump is a kind of efficient drilling equipment that is driven by pistons and they are used for circulating drilling liquids. In addition to circulating the fluid, theLewco W2215 mud pump aids in clearing away any dirt that may have accrued at the time of drilling process.

In the marine industry, the drilling process requires some highly efficient mud pumps, that’s why Lewco mud pumps are widely used in marine industry as they are extremely efficient. Lewco mud pumps are combined with various pumps, like centrifugal pumps, and they have several wonderful features. You cannot complete the drilling process without an efficient Lewco W2215 mud pump.

Since mud pumps are able to pump drilling mud into the drill hole, they are the most significant component of the oil and gas sectors and marine sectors. These drilling equipment come in a wide variety, and each of them have various kinds of top features and uses.

Lewco W2215 mud pumps are one of the most reliable mud pumps and various different sectors are using these great drilling equipment for the drilling process. Here are some major uses of Lewco W2215mud pumps in different sectors.

One of the main uses of Lewco W2215 mud pumps is this one. Different kinds of industries like oil and gas industries, marine industries and many more are using these great mud pumps for completing the drilling operations perfectly.

This most popular use of Lewco W2215 mud pumpscannot be disregarded while discussing their many applications. Lewco W2215 mud pumps are typically employed during the well drilling operations of water to pass the water through the drilling hole. Additionally, these mud pumps are also used for washing away any type of debris.

In pipeline systems also, you can use Lewco W2215 mud pumps to clean the pipeline and prevent them from debris. The Lewco W2215 mud pumps circulate water or any other liquid through the pipeline to remove any accumulation or dirt from it and make the pipeline clean and clear. This is also a major use of Lewco W2215 mud pumpsone cannot ignore.

In order to induce fractures, high-pressure fluid is included into the rock formation at the time of the hydraulic fracturing process. To complete this procedure easily and efficiently, you have to use efficient Lewco W2215 mud pumps as these are the best option for completing this tough procedure. The fracturing liquid is circulated by the Lewco mud pump, as it helps to keep the right pressure.

Construction sector also uses the Lewco W2215 mud pumps for some purposes. These mud pumps assist in stabilizing the floor of the construction site or drain water from that particular site. This drilling equipment are also widely utilized when any large building is made. Therefore, it is also one of the common uses of Lewco W2215mud pumps.

The operation of tunnelling also involves the use of Lewco W2215 mud pumps. During the process of tunnelling, this efficient drilling equipment can convey water and clay through the drilling region. This helps keep the tunnel’s walls stable and prevents collapse. So, one cannot overlook thisgreat use of Lewco W2215 mud pumps in tunnel processing.

Sometimes, Lewco W2215 mud pumps are employed at the time of geothermal processing to transfer water or any other liquids through the drilling region. Thus, this is one of the main applications of Lewco W2215 mud pumps.

Want to purchase premium qualityLewco W2215 mud pumpsor any other mud pumps at fair cost? Then get in touch with Ababil Marine, the top drilling equipment producer and supplier in India.We manufacture extremely durable and efficient mud pumps with best quality materials. We always offer a wide variety of mud pumps of popular brands. Get the most effective mud pump for your company at an inexpensive cost.

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

⊙Mud pump spare parts of abroad brand:Eg. Liner, piston, valve assembly, valve seat, valve spring, valve rubber could be alternative for original with lower price.

⊙Original brand:Emsco、Gardner-Denver, National oilwell, Ideco, Brewster, Drillmec, Wirth, Ellis, Williams, OPI, Mud King, LEWCO, Halliburton, SPM, Schlumberger, Weatherford.

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

We are a supplier of aftermarket mud pump parts. Whether it’s a duplex or triplex pump, we offer a complete line of parts and spares that interchange with most brands. We supply everything from chrome and ceramic liners, seals, crankshafts, pistons and modules and everything in between.