lime mud pump manufacturer

Distributor of heavy duty submersible mud, sand, sludge & slurry pumps. Specifications of pumps include 5 hp to 30 hp motor, three phase, 208 V to 575 V, 6.8 A to 39 A, 3 in. to 6 in. NPT sizes, 38 ft. to 134 ft. head size & 475 gpm to 1,690 gpm flow rate. Features include impellers, wear plates & agitators made from abrasive resistant 28 percent chrome iron, process hardened ductile iron volutes casted with thick walls, class H motor insulation, double silicon carbide mechanical seals, heavy duty lip seal & stainless steel shaft & shaft sleeve. Sand, sludge & slurry pumps are used in mines, quarries, dredging, coal & ore slurries, sewage treatment plants & steel mills. UL listed. CSA approved. Meets OSHA standards.

The dominant construction-related use of lime is soil stabilization for roads, building foundations, and earthen dams. In addition, lime pumping applications can also apply to wastewater treatment. Lime is added to low-quality soils to produce a usable base and sub-base. Hydrated lime has long been acknowledged to be a superior anti-stripping additive for asphalt pavements. It also helps resist rutting and fracture growth at low temperatures, reduce age hardening, and improve the moisture resistance and durability. A recent study shows lime holds significant advantages over other additives for hot mix asphalt roads, including long-term cost savings and increased durability. Perhaps the oldest and most traditional use of lime has been in mortar and plaster, because of its superior plasticity and workability.

In regards to wastewater treatment, lime can be used as a far less expensive treating agent. This is because lime has the abilities to increase the alkaline content in water along with controlling bacteria growth commonly found in storage and aeration tanks. This lime slurry process also aids in the removal of manganese, fluoride, tannin, and iron from wastewater systems.

Lime chemical provides an economical solution for removing impurities in clean water, wastewater and sewage treatment processes. Also helps regulate pH control of acidic wastewater.

Paper/pulp production uses lime for both the production of sodium hydroxide and as part of the bleaching process and neutralization of acid wastewater.

Adding lime with water, as a slurry, allows the solution to be pumped considerable distances, making transporting the material easier than mechanically loading into trucks. As you can imagine, the lime slurry is not only corrosive but abrasive as well, which can pose challenges for all types of pumps. Due to these challenges, pump manufacturers are constantly coming up with new designs for reducing the detrimental effects that lime slurry can have on their equipment and production rates. Some of these design ideas are featured on multiple types of pumps including slurry pumps, centrifugal pumps, and peristaltic pumps. Typically, the answer to effectively pumping lime is to keep the fluid moving constantly to maintain the chemical in suspension. With lime slurry, it is important to constantly be reaching a critical line velocity in which there is enough flow and turbulence to prevent sediment from building up in dead spots or crevices found throughout the system. It goes without saying that cleaning limescale in pipes can be very labor intensive, expensive, and particularly in metal pipes. Ideally, the pipeline should be as smooth as possible with an open flow path, making sure the flow rate is directly proportional to maintaining momentum. This is why the EDDY Pump’s turbulent flow design is perfect for keeping the slurry agitated enough to not accumulate on the sides of the pipelines.

During the transportation of lime slurry, there can also be damage to the pipeline transporting lime slurries due to limescale buildup and abrasion at sharp elbows and bends. As a result, radius piping with long bends should be used to help counter this problem. In extreme cases, lime batch tanks can leak or rupture due to excessive pressure build-up. Operators now typically install pressure relief valves as a preventive measure. Another issue with storing lime slurry is the abrasive nature it exhibits in holding and mixing tanks. Most cases of abrasion damage to storage and mixing tanks problems stem from operators using FRP tanks for slurry preparation. However, corrosion resistant metal tanks should be used instead, greatly increasing the lifespan of the tanks.

Scaling in lime slurry piping is another problem caused by the escape of air into pipes (formation of calcium carbonate) and settling of solids during off cycles especially when smaller diameter slurry lines are used. Needless to say cleaning scale in pipes can be very labor intensive particularly in metal pipes. This problem can be minimized by recirculating the lime slurry through a “recirculation loop”, using flexible hoses for slurry transport inlet lines, minimizing the number of sharp bends using piping at least one and half to two inches in diameter and periodically flushing the lines with water. Keep in mind that even using larger diameter lines to lower pressure drop will not eliminate settling of the solids or reduction of flow so the easiest way to design a pipeline is to maintain non-settling conditions, similar to the design of dilute-phase pneumatic conveyors.

Lime is harmful when in contact with skin and eyes, making it very important to ensure the fluid is fully contained and not able to be splashed around. Lime chemical is strongly alkaline and very abrasive as the powder chemical format is insoluble in water and the particles will have a wearing effect on moving parts where there are constant friction and velocity. The EDDY Pump is a unique pump that outperforms other pumps when it comes to pumping abrasive and high viscosity lime slurries.

Our offered Lime Slurry Pumpworks on the principle of induced flow for providing superior versatility in handling fluids. This pump is a perfect blend of performance and benefits of positive displacement pump. Free Disc technology is used in the making of the mentioned pump that involves discs for performing the functions of valves and diaphragm. Thus, providing non clogging and pumping action. Lime Slurry Pumpthat we offer consists of a fluid chamber, which is sealed using flexible trunnions for eliminating packing and mechanical seals. Also, this pump does not require flushing of any kind of lubrication. Following are some reasons that make our Lime Slurry Pump a worth buying product Known for its high resistivity against corrosion and rust.

These pumps are highly renowned for their iso 2858, 5199 standard dimensions, simple & reliable bearing rich experience in design due to our advanced manufacturing facility.

HaoYang AODD pumps are suitable for an endless variety of applications . Our pumps can be deployed in fixed installations within a process flowsystem, or used as portable or mobile units that can be transported to where it is to be used.

The air operated diaphragm pumps use compressed air as power source, and it is the most advanced type of diaphragm pumps in market for the moment. It adopts three-way air pilot valve to achieve real no dead stop and faster reversing. It is widely applied in waste water treatment, chemical industry, petrochemical industry, painting, ceramics, environmental protection, printing and dyeing, etc. to deal with all kinds of corrosive, volatile, flammable, poisonous fluids with particles and high viscosity.

Air Operated Diaphragm pumps are perfect for spraying paint, cleaning roofs and spraying conveyers/bottles for anti-static. These pumps are suited for these types of applications due to their durability and the volume produced by each pump. The pump, combined with the power of an air compressor, allows cleaning chemicals, paints and other fluids to be dispensed at a constant rate.

The selection of available housing and elastomer materials make our pumps adaptable for most highly aggressive or corrosive media. HY pumps’outstanding chemical resistance and robust design contribute to a reliable and safe operation.

Water treatment facilities pump huge amounts of water every day. A reliable pump that can stand up to continuous use is key to efficient operation. Our air-driven diaphragm pumps

Shanghai Haoyang Pump Valve Manufacturing Co., Ltd.designed and manufactured for over 10 years in Shanghai,China. HaoYang Air-Operated Double Diaphragm (AODD) pumps have earned industry recognition for premium quality and innovative design. And we supply accessories and componentssuitable for most AODD pump installations.To ensure suitability for a variety of media, wetted parts areavailable in numerous optional materials.

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Our self-priming mud pump is best industrial mud pump used to circulate the mud. It is a non clog and self-priming type. Mostly used in marine, industrial, civil, construction, public utilities, polluted liquid including solid, sewage, oil well drilling, waste handling, etc applications.We also manufacturer self-priming pumps with semi-open type impeller as per the requirement of the clients. It is the most suitable industrial pump for handling water and noncorrosive liquids.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our SMSP Series features some of the most efficient and high powering pumps in our arsenal. From perfectly sealed design to extremely smooth bearings, it will give to the highest quality performance without any need for inspection or maintenance.

Our self-priming mud pump is best industrial mud pump used to circulate the mud. It is a non clog and self-priming type. Mostly used in marine, industrial, civil, construction, public utilities, polluted liquid including solid, sewage, oil well drilling, waste handling, etc applications.We also manufacturer self-priming pumps with semi-open type impeller as per the requirement of the clients. It is the most suitable industrial pump for handling water and noncorrosive liquids.

Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.

Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.

Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation

Casing/Volute liner of SG sand gravel pumps is also made of high chrome alloy A05 to handle roboust rock and stones. The impeller of sand gravel pumps is closed type with 3 vanes, of which the passage is very big, and so it can allow very big solids to pass by. Gravel pumps are more likely to be used for dredging, for instance, river dredging, pond dredging, ocean dredging etc.

The big order of slurry pump parts was placed to us by our Russian regular customer during February. There are the wet-end parts and rotor parts of the well-known double frame pump models like 3/2CC-AH, 8/6EE-AH and 10/8FF-AH. The rotor parts include bearing housing, shaft etc.. And split outer casings of standard heavey duty high friction slurry pumps and high pressure slurry pumps.

As is all known, the material of slurry pump wet-end(wear) parts is high chrome alloy A05. What we want to introduce is the pump outer casings. We do two alternatives: grey cast iron and ductile cast iron. Of course the ductile iron is more expensive than grey iron.

• Barite, ferric oxide, and mineral oil• Base drilling muds• Glass fibers• Sugar processing• Ash or coal conveyers• Cement• Mine de-watering• Lime slurries• Kaolin clay• Crystalline forms