mud pump concrete slab brands

More contractors are turning to foam slab jacking instead of mud jacking to lift driveways, side walks, garage floors, and even airport runways. Powerful Graco foam slab jacking pumps easily fill all underfloor cavities with expanding polyurethane foam, whereas concrete slurry often fails to fill the voids. Resettling could, therefore, happen again. But when you inject foam under pressure, all air cavities are filled permanently.

The Revolution Pump is the only portable system on the market for slab lifting with foam Concrete slab lifting and void filling with polyurethane foam is fairly recent innovation that is faster, cleaner, and usually less expensive than mudjacking. And if tight access or underground pipes are issues, foam lifting is the only choice beside replacement.

Slab lifting with foam is a profitable addition to your service line. The award-winning Revolution from Prime Resins offers high performance in a compact, portable package. This is the only truly portable slab lifting system on the market.

The Revolution is a two-component slab lifting pump that uses gear-driven technology. Unlike piston pumps, the simplicity of one continuous rotary motion means exceptional output efficiency plus less energy and wear and tear. The Revolution is a medium-pressure pump that runs on standard 110-volt power, with on-board heaters and a built-in recirculation system. This is a combination of features you won’t find on any other pump.

Precision Lift Foam – a high-density, structural polymer that expands and develops hydraulic lift to level and stabilize slabs. No shrinkage+3.5# density= no call backs for crushing foams

Manufacturer of grouting & gunite equipment & accessories. Pumps, mudjack trailers, batch plants. Accessories include clamps, couplings, hose, nozzles, reducers, pressure gauges, water meters & finishing tools. Applications include mining & underground, DOT highways, roads & bridges, industrial & indoor, masonry, construction & concrete repair.

This company was recommended by a friend. I had him do two projects for me, my personal patio and my Mom"s slab floor in her family room. My patio came out as promised and was very satisified. The true test for this company was with my Mom"s family room slab, the settlement of the concrete pad also did extensive damage to her fireplace. The company representative came out multiple times to ensure the job could be completed as promised. I asked for his insurance documents, his agent had them emailed to me before the end of the same business day. The job came out phenominal, above and beyond our expectations (wish I could show before and after photo"s). I am very confident in recommending this company to anyone needing this type of work.

Our company started with other brands of pumps and decided in the early 2000"s we needed an upgrade to a more reliable concrete pump. After shopping with different manufacturing companies, comparing prices and viewing customer comments, we were convinced that Reinert was the path we needed to follow. We now own 5 Reinert concrete pumps. We are very pleased with the quality and the service that Reinert provides.

You’re researching foundation repair options and have come across the term “mud-pumping” and you want to know what it means. Or maybe you are thinking about when a foundation is lifted, what happens with the space underneath your home? There’s a void there now and does it get filled in or what?

Mud-pumping is a finishing step of foundation repair, but not every foundation repair contractor adds this final step. It’s not automatically done so you might be wondering why some companies would use this technique or what its advantages and disadvantages are.

At Anchor Foundation Repair, we have been repairing foundations since 1985 and began adding mud-pumping to all slab-on-grade foundation repairs in 1998. We decided to take every reasonable step to provide the most security and stability in foundation repairs to Brazos Valley homeowners and bought our first hydraulic mud pump at that time.

We know mud-pumping has great value and importance in a foundation repair project, it’s a standard part of our slab foundation repairs. But we can tell you about it in an objective way so that you can decide if it’s as important to you as it is to us.

In a nutshell, foundation settlement coupled with foundation repair creates voids. Here’s why: a home with a slab foundation is built on the ground. Homes are heavy. Over time, the weight of the home will compress and compact the soil below it.

Settlement can also occur because of the expansive clay soil we have in this area. Expansive clay expands when wet and contracts when dry. The drier the soil gets, the more it can contract, also causing a home to sink. It might not all sink evenly. This is how slab foundations can crack and possibly need repair.

During the repair process, the home is raised back up to its original elevation. So imagine that the home is lifted, but since the soil was compacted below it, now there is space between the ground and the bottom of the slab. This is also called a “void” which is a fancy word for empty space. I mean, technically there’s air in the space so it’s not totally empty but . . .

Now, you could just scream into the void underneath your home. But more productively, you can consider filling it with mud-pumping material so that there is not a bunch of empty space between the bottom of your home and the earth. Mud-pumping helps lessen the opportunity for more foundation settlement or problems to arise.

Mud-pumping is not typically needed for pier and beam foundations, but for slab-on-grade foundation repair, it is an option. While mud-pumping is not *required* in foundation repair, it has many benefits for the homeowner.

So no, mud-pumping is not necessary to complete a foundation repair project, and manyfoundation repair companiesdon’t do it. Even though foundation repair contractors often skip this final step, you may want to seriously consider it. All the “whys” are in the next section.

Nature doesn’t like empty things, nature wants to fill them up. This is that “nature abhors a vacuum” thing. If the void under your home doesn’t get filled with mud-pumping material. It will very likely get filled with something else, like:

PRO #1: So one of the pros of filling voids with mud-pumping is that it takes up that empty space and prevents those areas from getting filled with something less desirable. The slurry material flows and fills every little space, permeating even the smallest pockets of air. But there are a couple more compelling reasons for you too . . .

PRO #2: Empty space creates weaker points and added stress to the foundation where it is not directly supported. Mud-pumping provides extra stability and holding power to your foundation without empty spaces under it. Having something solid underneath your whole slab is more supportive than drilled piers or pressed piles alone.

PRO #3: Mud-pumping the voids under your foundation also minimizes the risk of further movement and settling. When things are all snug and surrounded by other material, it’s less likely for them to wiggle and move around. It’s kinda like tucking your kid in at night. You burrito that little one in good with the hopes that they will stop moving and fall asleep, right?

Side Effect Bonus PRO #4: The step before mud-pumping is testing your under-slab plumbing to make sure there are no leaks. If leaks are found, they need to be fixed first. So if mud-pumping is used on your foundation repair, you will have the added comfort of knowing that there are no leaks or that they have been repaired. This is another way to make sure that further problems don’t come up later for your foundation or underneath it.

Like anything else, there are a few cons to mud-pumping as part of your foundation repair. Even though we are a fan of mud-pumping, it does have some risks and downsides that we want you to be aware of.

CON #1: Mud-pumping costs more. This is an additional step that takes added time and more materials, SO there will be extra cost to you. Mud-pumping adds between $2,000 and $4,000 to the price of your average-sized foundation repair.

CON #2 (minor): There is a small risk of over-pumping the mud and adding too much material under the home. This can cause a hump in your floor. But with an experienced team working on your foundation repair project, this has a low chance of happening. Just want you to know this is a potential problem that could happen with an inexperienced or less careful contractor.

CON #3: Just like that kid that you tucked into bed with a burrito blanket, there’s no guarantee that no more movement will take place. Mud-pumping is a safeguard, an insurance policy, a risk minimizer, but it’s not an absolute settlement solution with no potential for failure.

Like many forms of insurance or safeguards, you don’t really know if you’re going to need it or not. You might only know the value of mud-pumping afterward in hindsight since we can’t predict what will happen later with your home.

As mentioned, mud-pumping is a final step in a foundation repair project, but it has a few steps of its own to complete the process. Here’s a breakdown of how it works:Raise the foundation and secure it in place with shims

The mud-pumping process takes about half a day or small projects and several delays for larger jobs at the end of a foundation repair project. So it doesn’t add a lot of time to the job but it can add some peace of mind.

What’s the worst-case scenario if you don’t do mud-pumping? Well, you could spend thousands of dollars on a foundation repair only to have it settle all over again due to missing that final step and leaving voids under your foundation.

On the flip side, your home can still settle no matter what you do (or it might not, there’s no way to know for sure) but the risk is minimized as much as humanly possible if you add mud-pumping to the repair. This seems like a tricky decision, so let’s try and make it a little easier with some “if-then” statements.If you love your home and plan to be in it for the long haul and want the very best, get the mud-pumping.

If you are selling your home and won’t be living in it any longer, then you’re not worried about the longevity of the repair and could skip the mud-pumping.

Here’s one more “if-then” statement for you: if you want to use Anchor Foundation Repair for your slab-on-grade foundation repair project, then mud-pumping is part of the deal. We don’t leave repair projects without the last step because we also have a lifetime warranty and service agreement.

At Anchor Foundation Repair, we have seen firsthand the consequences of not filling voids after repairs in our 35 years in business. We have inspected and repaired dozens of homes that had previous foundation repairs (by other companies) without mud-pumping. We have felt the hollow-sounding floors and seen homeowners having to go through the repair process again to get it right the second time.

MANITOWOC, WI – August 27, 2014 – I never would have imagined that forty years ago when I was working to pay off interest on a loan to my father-in-law for my first house by working weekends raising concrete for him, that I would soon become the owner of a world leading manufacturer of concrete raising equipment and material.

That fortuitous weekend of labor was the start of it all. The growth and innovations have followed, whether it was the invention of the first hydraulic mud pump or the introduction of polyurethane systems at the entrepreneur level.

RaiseRite Concrete Lifting, Inc. began in 1974, by myself and two others, with no money to buy our equipment so we rented it from my father-in-law. Our first truck was a 1951 Chevy flatbed, we affectionately named "Bullwinkle". By September, RaiseRite needed to add another crew to cover Green Bay.

In 1978, I knew there had to be a more efficient and less strenuous way to raise concrete, so I developed the first hydraulic mudpump. The next year, sales were well on their way as was HMI as we began manufacturing the "new" hydraulic mudjacking pumps. Today, HMI continues to manufacture mudjacking pumps and systems, polyurethane foam lifting systems, and polyurethane foam.

Monthly, HMI hosts Discovery and Training Seminars either at our Manitowoc training facility or various metropolitan areas throughout the United States. These seminars offer individuals looking to add to their existing business or start-up a business, the opportunity to experience "hands-on" how to raise concrete. As a supplier and trainer, HMI has helped put over 1200 families into business and have contributed to the employment of over 10,000 people.

I am still retaining the position of CEO, but I work side by side with my two sons: Jeff-President HMI and Brian-President of RaiseRite. Over the past 40 years, we have lifted and leveled 14,000,000 sq. ft. of concrete participating in over 70,000 projects. HMI"s equipment has lifted and leveled 240,000,000 sq. ft. of concrete on every continent, but Antarctica. I look at this anniversary not being about us at HMI/RaiseRite. It is all about you-our customers-Thank you again!

About HMI/Raise Rite: HMI/Raise Rite has two Manitowoc locations: 4803 Leonard Lane and 1025 E. Albert Dr. employing approximately 30 individuals. In addition to concrete raising, RaiseRite has a foundation piering and waterproofing division. For more information, please use the contact information and links provided below.

Select ServicesWalkways & Concrete DrivewaysExterior Concrete StairsPatiosResidential ADA ComplienceWarehouse FloorsVoid DillingCommercial ADA ComplienceIndustrial Concrete LevelingDeep FoamjectionOther ServicesNot Sure

Select ServicesWalkways & Concrete DrivewaysExterior Concrete StairsPatiosResidential ADA ComplienceWarehouse FloorsVoid DillingCommercial ADA ComplienceIndustrial Concrete LevelingDeep FoamjectionOther ServicesNot Sure

PolyTech Lifting LLC was established in 2016 and is based in Chicago, IL. Our team consists of professional and skillful contractors that meet our high level of excellence. We provide the reliable concrete services your residential or commercial property needs. We offer mudjacking, concrete raising, concrete lifting, and concrete leveling Chicago.

For our mudjacking Chicago, we use quality tools and mixtures to ensure the stability and proper concrete lifting of your structure for years to come. We have the expertise to stabilize your settled concrete slabs for long-lasting results. We also offer polyjacking Chicago for longevity, easy application, and a cleaner finish. You can be sure that our services are affordable, safe, and non-invasive to your landscape or property. Contact us!

Our mudjacking Chicago services are designed to effectively raise the settled concrete slabs in your landscape or property. As a result, you can enjoy sturdier concrete on your sidewalks, porch, pool decks, driveway, parking lot, or wherever else you require our mudjacking expertise. Call us to learn more information.

Our concrete raising Chicago service is a great alternative for completely replacing or repairing your concrete slabs. While your concrete might have sunken or settled already, we offer a cheaper method to raise it to a restored condition. Contact us anytime to schedule a professional inspection of your property.

We are a trusted company in the Chicagoland area when it comes to concrete, including concrete lifting Chicago. We have the expertise to lift and level sunken your concrete slabs and restore them to their best condition. Give us a call to seek our professional services.

When the time has come to correct your uneven surfaces, we are the company to call. We offer affordable and prompt concrete leveling Chicago to save your property from expensive repair work. We keep your safety, security, and convenience in mind so you can leave all the work with us.

For major damages, our company is ready to repair your surfaces with our concrete repair Chicago. We will take care of your sidewalks, patio, porch, and more! We are a professional team of concrete specialists at your service. Call us and we will schedule an inspection ASAP.

Tired of your cracked driveway or patio? Our company will take care of it! We have professional contractors on our team that can give your property the right concrete repair Chicago. We provide affordable and premium services in Chicago and the Chicagoland area with lasting results. Contact us!

Polyurethane concrete lifting involves using a type of specialized foam in order to raise your concrete and make it level again. To do this, dime-sized holes are drilled into your existing concrete. A hose will inject the foam into the holes. The foam (with the aid of the slab itself) while fill in any gaps and raise the slab back to the correct level. Once the process is complete, the holes will be filled in with new concrete that is finished to resemble what’s around it. This process generally only takes a couple of hours, and you can walk on the concrete again immediately afterwards.

This process may sound similar to mudjacking—and in a lot of ways, it is—but there’s a reason our concrete leveling company has moved towards polyurethane concrete lifting. For one, the holes used in polyurethane concrete lifting are significantly smaller than those used in mudjacking. For another, polyurethane foam is environmentally friendly. Plus, the foam is incredibly durable and far cheaper, meaning one can expect longer lasting results for less.

While concrete is a durable material, it can still sink or crack over time. This can lead to an unlevel, unstable surface. Many people will likely think about just replacing the concrete, but this is a massive and expensive undertaking. What they may not know is that there’s a solution—concrete leveling. Concrete leveling contractors can pump foam underneath your slabs to lift them, meaning you won’t have to worry about replacing it. Traditionally, companies would do this through a process called mudjacking, but recently a better process has emerged: polyurethane concrete lifting. PolyTech Lifting LLC is an expert with this method of leveling. Our concrete leveling company has the skill and experience you need to raise the concrete on your Chicago, IL property, saving you time, money, and stress.

Concrete raising can fix all sorts of problems, lifting everything from porches to sidewalks. Our concrete leveling contractors are experts in the field and can give you service that you can rely on. Just some of the benefits of working with our concrete leveling company include:

Our concrete leveling company serves in and around the Chicago, IL area. So, don’t work with mudjacking companies you aren’t sure you can trust. Get the most out of your concrete with polyurethane concrete lifting. Call PolyTech Lifting today to see what we can do for you

Sinking slabs can be detrimental to anyone’s safety, so it is best to have them repaired as soon as you can. Concrete leveling proves to be highly beneficial for many households, as follows:

Lopsided concretes can be a tripping hazard for employees and house guests, which can result in injuries or worse, lawsuits waiting to happen. Get concrete lifting Chicago from our company as soon as possible.

Beyond safety, level concrete can increase curb appeal for any residential structure. Fixing them right away gives your guests an excellent impression of the care you put towards your property.

Cracks here and there can definitely lower your property value. Before putting your property out in the market, you should invest in high-quality concrete repair or concrete raising Chicago for the benefit of your property value.

Uneven pavements cause a range of major to minor issues including erosion. When your driveway concrete Chicago is suffering from cracks, this can easily welcome unwanted water penetration, leading to more repairs later on.

Save your property from full damage with our polyjacking Chicago services – a better alternative for classic mudjacking. Call our company today and get the best concrete repair services there are!

The polyurethane foam that our polyjacking Chicago company uses is lightweight and adds only 3-5 pounds. Polyurethane foam is also an eco-friendly product. On the other hand, mudjacking Chicago uses a heavy concrete grout that adds 100 pounds per cubic foot to the sub-base. Polyjacking is the advanced go-to method of choice in restoring concrete surfaces in Chicago because of its many benefits.

Polyjacking is less invasive because it only requires smaller and fewer drilling holes. It is also stronger and does not retain moisture or pollute our environment. Polyurethane foam expands into a lightweight and durable material that will lift and support the concrete for many years. Compared to mudjacking Chicago, polyjacking’s process is simple, making it the best way of concrete leveling. The concrete can also be used immediately after the repair is completed.

Compared to mudjacking, polyjacking has the least “rest” time. This is an excellent way for high traffic areas around your house like driveway, concrete stairs, porches, sidewalks, and patios. Polyjacking is efficient and less inconvenient. If you need concrete raising, concrete repair, or concrete leveling Chicago, call our experienced team, and we’ll be happy to walk you through each step for the most co-effective solution that fits your needs.

Soil settling, rodent burrowing, groundwater issues, and more can impose different problems to your driveway concrete Chicago slabs. Concrete might be durable construction material, but it will also deteriorate after years without proper repair and upkeep.

When choosing between concrete replacement or concrete repair Chicago for your driveway, our experts will discuss the best options for you. Many factors are linked to why driveway slabs sink, yet water is the primary reason. Water can cause holes below the driveway slabs, making it sink later on.

Knowing a concrete repair Chicago specialist that can restore the original state of your concrete is important. But, it is even more important to find someone who can offer a solution to your sunken concrete.

A crack inside a slab or a junction between slabs can cause a portion of the slab concrete to become uneven. Good thing that concrete driveway repair Chicago can be utilized to pump polyurethane foam below the lower part of the slab. Foam raises the lower side, sealing the crack in the process. It eliminates trip hazards and, at the same time, avoids long, expensive, and grueling replacement projects.

This company was efficient in doing the concrete repair Chicago for my home. No space was spared. They made my walkway look brand new and perfect for my front door. There’s no more sunken concrete and it looks flawless. Thanks!

The contractors from this company managed to lift the heaviest concrete slabs I got. 7 to 8 inches thick isn’t easy to manage, but they did it! I got no doubts about their services like concrete patio repair in Chicago.

My settled driveway concretes are a real eyesore. So glad this company popped up during my search. Their concrete driveway repair Chicago highly commendable. A neighbor also got their polyjacking . Great job!

By definition, concrete leveling, also known as mudjacking, cement jacking and cement lifting, is the process of correcting an unlevel slab of concrete by pumping poly foam beneath the slab. A lot of questions go along with this process, so here are the answers to a few of the most common:

Yes! For most jobs, concrete leveling is the best option for raising concrete. The process is tried and true and has been in use for decades. There are, however, instances where mudjacking may not be the best solution. If the concrete you are raising has large portions that have deteriorated, or if the subsoil is still settling, mudjacking may not be the best option.

Concrete leveling is not a short term fix, and in most instances will last 8 to 10 years, but can last the span of the lifetime of the slab. There are factors that will affect how long the repair lasts, including what the underlying problem that caused the sinking was in the first place. If the property is newer, or the slab sunk rapidly, there may be a larger problem at play under your slab. However, if the underlying problem is corrected, such as a leaking pipe or misdirected downspout, the mudjacking process should keep your slab in place for many years to come.

Concrete leveling is a much less expensive proposition than completely replacing a concrete slab. With slab replacement, you need to factor in the cost and labor of first removing and disposing of the existing slab. Second, the leveling process is much shorter, usually able to be completed in a few hours to one day and is able to be used nearly immediately. If your sunken slab is next to another existing slab, the color of a new concrete slab may not match, since time and weather changes the appearance of the surface. This can lead to mismatched walkways or driveways. Now, mudjacking may not be the best solution for every case. If the concrete that is sinking is deteriorated, smashed or crumbling, then a new slab may be needed. However, for most other applications, mudjacking is the economical approach to repair your concrete.

Mudjacking costs $3 to $6 per square foot, and foam jacking is $5 to $25 per square foot. The average cost of slabjacking to raise a concrete slab is between $511 and $1,790, with most spending $830. Concrete leveling prices depend on the size and condition of the slab and soil conditions.

Concrete settling or sagging is normal, especially when it"s old. Some foundation issues can be serious and lead to additional damage if not fixed right away. Concrete slab leveling is an inexpensive and quick way to fix uneven concrete and add structural support to a foundation.

The two main options to raise concrete are mudjacking and foam leveling. Each has considerable differences and is better suited for specific areas. Mudjacking requires larger holes drilled and costs $3 to $6 per square foot, while the stronger polyurethane foam runs $5 to $25 per square foot.

Mudjacking is a method of lifting a sunken concrete slab by pumping a mud-like mixture under the concrete to make it level again. Mudjacking, also known as "slab jacking" or "concrete leveling," is a quick and cost-effective way to level sinking concrete foundations, sidewalks, patios, and driveways.

The mudjacking process starts by strategically drilling holes 1” to 2” wide and injecting material to fill any voids under the slab, raising the sagging concrete within minutes. Mudjacking is eco-friendly, cures in 24 to 48-hours, and typically costs 25% to 50% less than concrete replacement.

Foam jacking, also known as "polyfoam" or "polyjacking," is a modern version of mudjacking that levels concrete slabs in a less invasive way. High-density polyurethane foam is injected into ⅝” holes that expand to lift and level the sunken concrete. Polyfoam is stronger and longer-lasting than traditional mudjacking.

Concrete leveling foam cures in 30 minutes, is mold and water-resistant, is not subject to erosion, and provides 6,000 to 14,000 lbs. per square foot of support. However, it"s more expensive than mudjacking.

Mudjacking costs $3 to $6 per square foot, while polyurethane foam jacking or PolyLevel runs $5 to $25 per square foot on average. Larger, thicker structures such as porches are more costly per square foot than simple slabs like sidewalks.

The warning signs to level your concrete are not always apparent. Cracked, sinking concrete is the main sign of a poorly compacted subsoil, erosion from water leaks, animals tunneling underground, or other structural issues that require leveling.

Mudjacking works for most situations, although the thick mud may not get into every crack, and the subsoil could sink again over time. One solution is to drill more holes, which increases the invasiveness and limits the effectiveness.

Mudjacking may not be the best option for load-bearing parts of the foundation or if your concrete is severely cracked. Consider using stronger polyfoam or an alternative repair option if:

Concrete leveling typically costs $500 to $1,800, with most homeowners spending $800 on average. The cost to level a concrete floor is 25% to 50% less than concrete slab replacement. Prices depend on the size of the slab, the amount of concrete damage, and underlying soil conditions.

Repairing a foundation with foam jacking costs $10,000 to $25,000 and up or from $5 and $25 per square foot, depending on the foam type and amount used. Leveling an uneven slab foundation with mudjacking costs $4,500 to $9,000, although mud pumping is weaker and less stable than foam.

Estimates to level a concrete slab foundation vary drastically depending on subsoil conditions, excavation costs, and because it’s difficult to determine the volume of gaps below the surface until after the work begins.

Mudjacking a small section of a driveway costs $600 to $1,200 on average. The average cost to level an entire driveway is $1,400 to $2,700 for mudjacking, and between $3,000 and $7,000 for lifting with high-density polyurethane foam.

Driveways typically sink when downspouts pour water next to the slab, or if rebar was not used to reinforce the concrete. Also, concrete settles when builders use inadequately filled and uncompacted soil, or if rotting roots were left underground that decompose to make gaps.

The average cost of mudjacking 2 to 4 sections of a garage floor is $300 to $900. Raising an entire 2-car garage floor costs $1,100 to $2,200 for mudjacking or between $2,500 and $5,400 for foam injection. Mudjacking a garage floor is cheaper than repouring new concrete or using a self-leveling compound.

Identifying the root cause that made the garage floor sink is vital. If you have a steep slope against the side of the garage where the subsoil has eroded, then you may need steel-jacking or structural foundation repairs with piers instead of mudjacking.

The average cost to level an 800-square-foot basement floor is $2,400 to $4,800 with mudjacking, or between $5,000 and $12,000 with foam jacking. Mudjacking a basement floor is advised for gaps of a few inches between the bottom of the walls and floor—where nails and insulation are visible.

In these cases, the concrete raising is performed from inside the basement. Leveling a basement floor or crawl space is not recommended if the walls are showing further structural damage.

The average cost to mudjack a concrete patio is $450 to $900, or from $3 to $6 per square foot depending on the extent of the damage. Raising a concrete patio slab costs about half as much a pouring a new concrete slab and only takes a few hours.

The average cost of mudjacking a 30" long sidewalk is $300 to $800, or about $50 per section. Sidewalk leveling next to trees, bushes, driveways, or patios costs more and takes extra time due to limited access. Empty voids under the walkway more than a couple of inches deep cost extra.

As long as contractors fix the underlying structural problems that caused the slab to sink, mudjacked sidewalks can last for 20 years. Mudjacking is advised against old walkways due to a higher risk of damage.

Mudjacking concrete steps costs $200 to $400 or about $300 to $800 for foam jacking a 20 to 40 square foot stoop. Mudjacking is typically half the price of completely replacing the steps.

Leveling concrete steps may require drilling through the surrounding slab and sidewalk areas. Otherwise, hydraulic levers raise the steps from the sides, and the slurry or foam is pumped in directly underneath.

Mudjacking a 400-square-foot pool deck costs $1,200 to $2,400 on average or between $2,800 to $6,000 when using concrete leveling foam. Poly foam is excellent for pool decks since it’s the best erosion and water-resistant material. Contractors should know that excessive fill materials in the wrong places could damage underground piping systems leading to the pool.

Slab jacking costs depend on the size of the concrete slab, the method of slabjacking, excavation requirements, soil conditions, the extent of concrete damage, and the quality and amount of fill materials needed.

Any water drainage issues, lack of gutters, large trees, or plumbing leaks that caused the concrete to sink must be mitigated before mudjacking to ensure long term results.

Using per-square-foot estimates of a concrete surface area doesn’t factor in the material depth. If burrowing animals dug tunnels under the concrete, there could be an extra 30 feet of holes in the ground which require filling.

Reputable mudjacking companies use an electronic elevation survey, or a Ground Penetrating Radar Scanning (GPR) system to inspect the subsoil and measure the cavity size before estimating and drilling. GPR provides a more accurate estimate and helps professionals avoid in-floor obstacles such as plumbing and wiring.

Mudjacking fill can contain cement, limestone, clay, or sand-based grout. The materials used dictate the weight-bearing capacity and longevity. Low-quality slurry that’s mostly mud and sand doesn"t last as long. Ask your contractor for a high-quality fill that maintains the concrete elevation longer.

Concrete lifting foam comes in various types, each with different prices and weight-bearing capacities. Contractors use a high-density polyurethane foam that’s much stronger than the spray foam used for insulating homes.

Mudjacking fill contains water, which can cause the concrete slab to shift while curing. Once the mudjacking fill is fully dry, it contracts slightly, making it less stable than polyurethane lifting foam.

Heavy mudjacking fill material adds a burden to a poorly compacted subgrade, which can cause the slab to sink again. However, polyjacked slabs rarely sink again.

Significant foundation repairs cost between $2,300 and $6,750, depending on the extent of the damage and type of fix. Not every concrete repair requires leveling. Here are additional methods to consider.

Pouring a new concrete slab costs between $7 and $16 per square foot, which includes old slab demolition, and is recommended for major issues where damage is beyond repair.

After any method of repair, ask contractors to apply a weatherproof concrete sealant to prevent further sinking and cracking as the slab goes through freezing and thawing cycles.

Sand pumping costs $3 to $7 per square foot or between $550 to $1,000 to level a 12" x 12" concrete driveway slab. Sandjacking costs about 50% less than installing a new slab. Sandjacking is a variation of mudjacking that uses dry limestone sand to lift concrete slabs.

Sandjacking is typically noninvasive and doesn"t require drilling holes through the slab if the fill can be pumped in from under the sides. Sandjacking is recommended in areas where the soil is often wet. The fill compacts more and allows for better drainage. Sandjacking has no curing time and is ready to use right away.

PolyLevel costs about $15 per square foot or around 30% to 40% more than standard mudjacking. PolyLevel is a patented, high-density polyurethane foam used for heavy-duty concrete stabilization projects like home foundation and driveway work. This polyfoam cures in as few as 30 minutes.

Building permit requirements depend on local homeowner laws and the size of your project. Most concrete installation projects at or above grade level do not need permits. In some places, only licensed contractors may do any residential concrete work that costs more than $200.

Mudjacking lasts 5 to 10 years on average, depending on the subsoil base below. PolyLevel foam doesn’t break down like mud fill and lasts much longer. Still, both mudjacking and polyjacking can sink without a stabilized subsoil. Contractors should work to prevent future subsoil erosion to increase longevity.

Mudjacking can lift between 6,000 and 14,000 pounds per square foot, depending on the type of foam used. These polyurethane foams are stronger than bedrock and provide more than enough support for most homes and slabs.

Mudjacking is used successfully to level foundations with a relatively noninvasive procedure. Mudjacking only requires several 1” to 2” holes to be drilled into the foundation without damaging the surrounding landscape. This technique costs half as much as removing and replacing your existing foundation.

The average concrete leveling project is completed in one day or less. Mudjacking a small concrete pad takes around 5 hours, and leveling a sunken basement takes about 30 hours. Mudjacking takes anywhere from a few hours to a few days to cure, depending on the project"s size.

Most insurance policies exclude coverage for mudjacking, foundation cracking, or a house sinking. Homeowner’s insurance typically covers foundation damage due to natural disasters or other issues such as plumbing. For new homes under warranty, the builder may be responsible for mudjacking expenses.

DIY concrete leveling projects are possible for concrete slabs 4 square feet or less. Anything larger requires an experienced contractor with mudjacking equipment. Concrete slabs of all sizes are extremely heavy. Without adequate weight-bearing equipment and careful preparation, you risk breaking the slab.

Concrete leveling foam kits cost $50 to $700 and are suitable for small concrete crack-filling repairs. This method is only a cosmetic solution and doesn’t raise or level the concrete. Foam kits are epoxy or polyurethane mixes that are applied with a caulking gun to hide the appearance of cracks.

Some DIY enthusiasts try to level concrete with spray polyurethane foam insulation kits; however, polyfoam insulation doesn"t have the strength to bear the weight of concrete, people, or cars.

Self-leveling concrete costs $1 to $5 per square foot if you install it yourself, which is about half the price of mudjacking. Only pour self-leveling cement on slabs that have sunken an inch or less, and avoid using it on basement floors.

Using a self-leveling compound requires experience since it’s challenging to repair if the installation goes wrong. Be sure to fix the erosion or foundation problems that initially caused your concrete to sink before installing.

For small concrete slabs of 4 square feet or less that aren’t cracked, minor raising and leveling is possible using a system of fulcrum blocks. You can hoist the slab up with industrial sized clamps attached to a 4x4 beam while supporting the concrete with two car jacks underneath it.

After propping up the concrete, fill the ground underneath with 1 to 2-inch size gravel or Foamular 250 insulation sheathing, a high-density foam board designed to bear the weight of smaller residential slabs.

When using gravel, fill the hole at least one inch above ground level since the weight of the slab will likely compact it. Spraying water into the gravel makes it settle down farther if the slab is too high. Use fill dirt, pea gravel, or sod to seal the edges around the slab.

Most areas don"t have mudjacking pump rentals available for the general public because local laws require a contractor’s license. New foam and mudjacking equipment costs $4,000 to $10,000. The mud slurry fill, power drills, and extension hoses are sold separately.

Polyjacking equipment generally has an extra heating component to warm the fill up to 90°F before sending it through the high-pressure pump that combines the poly-spray with a special hardening agent right inside the nozzle.

Mudjacking is an equipment-intensive project that requires a specialized professional. Be sure your contractor has up to date licensing, insurance, and bonding before signing a contract. Insurance is necessary to protect you accidental property damage or injuries that may occur.

Check their online reviews and experience. The best mudjacking companies have at least 5 years of experience with great reviews on HomeGuide and Google.

Don"t let contractors overcharge by purposely overestimating the amount of fill. They may not refund the balance if they use less filler. Polyurethane pumps have a gauge that tracks the amount of foam pumped. Check the gauge before they start and after they finish, and compare with the pricing in the contract.

All concrete can be mud jacked. Examples include driveways, steps, patios, pools, basement floors, garage floors, sidewalks, grain bins, city streets, boat ramps, parking lots, interior floors, loading docks, runways, highways, schools, generator pads, warehouse floors, and more. There may be a few circumstances when concrete cannot be mud jacked, and it"s best to get an estimate to find out. Also, if the concrete is severely broken up, it is usually better to have it replaced than mud jacked.

Mud jacking is just a less expensive alternative to your concrete issues. It"s environmentally friendly and OUR MIX still allows your concrete to be recycled down the road.

Retaining walls too close to the area can cause an issue and may not be able to be mud jacked. Areas where structural components are attached can cause issues as well. Every situation is different, and should be looked at by a professional to determine if this process will work for your situation.

Rodents, such as moles or groundhogs, will tunnel under concrete slabs or next to foundations. When water runs down through these holes, it can cause wash outs or ground settlement.

Sprinkler heads do not get damaged. Yards, if dry, have no damage what-so-ever. If sprinklers are left on or the ground is soft, some ruts may occur from the hydraulic pump. Weak sprinklers line run directly in the concrete or directly under may burst from the movement. Correctly installed lines are never in either location, so usually there are no adverse effects on your sprinkler system.

It depends on the situation. Our trucks stay out on the street and our pumper units fit through most gates. If the project requires it, we can pump via slick line and reach interior areas or other hard to reach areas that our pumpers can not reach.

Our mud mix does not shrink. The only time you would see movement is if the ground is not 100% compacted or you are getting water under our product washing out the soil and creating a void.

Drilling holes makes a little dust, and if we have to saw cut your concrete, this can sometimes make a lot of dust, if water is not used. Water can be used to keep dust down if this is an issue for the customer. Please be sure to let us know if dust will create any issues for you.

Yes, all concrete can crack, especially lifting sunken slabs up into place. When the concrete sinks, it will get a stress crack on the bottom, but will not necessarily be visible. When the slab is then raised, the pressure will release and the crack will show on the top. These cracks are not caused by the mud jacking but are just made more apparent when raised. There can be cases where mud jacking will crack the concrete, if the correct process is not used. This is why several holes are drilled in strategic places, and you should be sure to hire the right mud jacking contractor.

No, not 100%. On new concrete, holes will match better because of concrete being lighter in color. Older concrete may not match as well because patched holes are lighter than the original concrete. However, over time, the concrete will darken with age and start to blend in better. While every attempt is made, no guarantees on colors and/or matching can be made.

There are several reasons that can cause this problem. The typical reasons for concrete settlement, when adjacent to a house or other structure, is improper back fill compaction. Over time, this settles creating a void under the slab which results in concrete settlement.

Concrete leveling / Slab Jacking / Mud Jacking / Concrete Lifting is the process of pumping mud under the slab to bring it back up to original height. No matter which term is used, it is all the same process.

This process consists of drilling 1-5/8" inch holes in the concrete slab, and pumping a mixture of limestone, portland and drilling mud underneath the slab to raise it to the desired height. Then, the 1-5/8" inch holes are cleaned out and cement is placed in the holes.

This process usually takes a couple of hours compared to days. Vehicle traffic can drive on it in 4-6 hours versus 1-2 weeks. It is about 1/3 the cost of replacement. Landscaping and grass is not disturbed. You can walk on the concrete immediately where you cannot walk on concrete replacement for 1-2 days. This is important for commercial properties, including retail, hospitals, apartment complexes, or any heavily used walk areas.

A void consists of a cavity under the concrete where dirt or rock has been washed away due to water or ground settlement. In return, the concrete is not supported properly and will cause sinking over time.

This process can last many years, even decades, because our product is crushed rock. It will not settle or deteriorate over time. However, if the ground is not 100% compacted or there continues to be soil washed out under the product, this may re-occur. If it does, these slabs can be lifted back into place again using the same holes.

Typically most concrete can be raised. However, there are many circumstances to consider. It is best to get an estimate to find out. Also, if the concrete is severely broken up, it is usually better to have it replaced than mud jacked.

No, not by the mud jacking process. However, the other slabs adjoining the higher slab could be raised up. Another alternative is concrete grinding to reduce a trip hazard. We do have our own special patented piece of equipment that allow us, in some circumstances, to be able to lower concrete using water.

It can be leveled but not lowered. For mild cases, the adjoining slabs can be lifted to match the height. Or the lifted slab can be ground on each end to reduce trip hazard. Otherwise, replacement is suggested.

On new concrete, holes will match better because concrete is lighter in color. Older concrete may not match as well because patched holes are lighter than the original concrete. However, the concrete will darken with age.

Once the bid is accepted, it may take 1-4 weeks depending on the current work load. However, if this is something that needs to be done ASAP, it can be scheduled in 1-2 days. Average mud jacking jobs usually take a couple of hours. Larger jobs take longer, but usually not more than 1 day.

Grinding can be used when slabs cannot be 100% leveled. Also if mud jacking cannot be used, grinding can take concrete down to reduce trip hazards. This is also a much cheaper process than replacement. Grinding is the process of shaving concrete down to the desired height.

All the mud jacking companies usually use the same materials. However, certain situations will determine if different material is used, as well as different slurry mixtures. Our mud mixture is crushed limestone with portland cement added as a hardener. We will also use drilling mud depending on the site conditions to increase flow ability and friction while pumping.

There are several reasons that can cause this problem. Scritchlow Concrete Lifting and Slab Jacking can come out and evaluate your site and identify your site issues.

Make sure the soil is 100% compacted (water soaking is the best compaction method). Also, make sure all ground is sloped away from home, and gutters and downspouts are working properly. All concrete joints and cracks need to be sealed to keep water from working under the slab.