mud pump discharge manifold supplier

Discharge manifold is the main part of discharge end of mud pump. The material is 35CrMo. One end is equipped with an exhaust filter assembly that delivers the pressure generated by the mud pump directly to the well, and the other end is equipped with an air pack assembly and safety valve, a pressure gauge, through the drain elbow.

Explore a wide variety of discharge manifold of mud pump on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These discharge manifold of mud pump are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these discharge manifold of mud pump is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right discharge manifold of mud pump for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of discharge manifold of mud pump to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.

The discharge pipe is the output end of the mud pump, one end of which is equipped with the discharge filter assembly to directly convey the pressure generated by the mud pump to the underground.The other end is equipped with the air package assembly and the relief valve and the pressure gauge through the discharge elbow.His material is characterized by corrosion resistance, wide range of temperature resistance and high strength. The configuration requirements of suction and discharge...

FET manufactures a full range of valves and seats for every drilling and well-servicing application as part of our full line of Osprey® mud pump system solutions. All of our valves and seats can be used in water, water base, oil base and synthetic base mud applications. FET offers additional valves and seats not listed below, including drilling valves, frac valves and well service valves. FET’s QC standards for the dimensional and material specs are extremely rigid in comparison to other manufacturers. Contact your FET representative to learn more.

High quality, reliable manifold assemblies for standpipe, mud pump discharge, choke, cement and fracking applications. All customized to customer specifications and designed to meet API 6A and ASME B31.3 specs.

An assembly of valves that allows the driller to direct the drilling fluid coming back from the well bore. If the return fluid is under pressure, the choke manifold assembly will release that pressure at a controlled rate. The driller can then redirect the drilling fluid to a gas separator, a flare, or to holding tanks.

Allows the driller to assemble cement pumps and connect them to the steel casing in the drill hole so the cementing process can be completed. Drill hole casings must be cemented into the well bore to seal all formations across the hold bore section

High quality, reliable manifold assemblies for standpipe, mud pump discharge, choke, cement and fracking applications. All customized to customer specifications and designed to meet API 6A and ASME B31.3 specs.

An assembly of valves that allows the driller to direct the drilling fluid coming back from the well bore. If the return fluid is under pressure, the choke manifold assembly will release that pressure at a controlled rate. The driller can then redirect the drilling fluid to a gas separator, a flare, or to holding tanks.

Allows the driller to assemble cement pumps and connect them to the steel casing in the drill hole so the cementing process can be completed. Drill hole casings must be cemented into the well bore to seal all formations across the hold bore section

At BOPM, we constantly maintain 5 million worth of mud pump parts on the shelf at our Houston warehouse location. It includes modules, liners, extension rods, piston rods, pistons , threaded rings, caps, valve covers, valve guides, valves, seats etc. for all major brands of pumps: Gardner Denver®, Ideco®, Emsco®, National®, Oilwell®, Skytop Brewster®, Lanshi(3NB1300C) ®, Bomco ®, HH ®.

In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge strainer Cross, high-pressure dischargemanifold and 7500 psi pulsation dampener.

BOPM offers a complete line of interchangeable fluid end modules and accessories for triplex mud pumps, such as National, Emsco, Gardner Denver, Bomco, Ideco and Oilwell. We offer both standard OEM style replacement parts and Two piece “L” Shaped fluid ends.

BOPM piston rods are made with premium grade, heat treated alloy steel. The rods offer excellent resistance to fatigue, corrosion and heavy loads. A full line of piston rods are available for various pumps.

BOPM extension rods are made from high strength alloy steel, and are either heat treated or chrome plated. The rod offers excellent resistance to fatigue, corrosion and heavy loads. BOPM extension rods are machined and polished to ensure a perfect seal to protect the mud pump gear end.

All of our gear set adopt high-end carburization heat treatment and precise grinding machining to offer unparalleled durability; first we use high strength alloy steel, then adopt the Carburization heat treatment to enhance the hardness and wearability, finally adopt the grinding fine machining to ensure the smooth gear teeth surface; Resulting in consistent and rugged performance throughout pump operation.

BOPM bonded urethane pistonsare constructed of urethane, bonded to a steel hub. The double durometer urethane is designed to provide optimal performance in oil or water based mud and high drilling pressures.

BOPM Replaceable Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

BOPM Bonded Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.