mud pump drilling rig for sale

The Baoji/Bomco F1000 Triplex mud pump has a max. working pressure of 5,000PSI and a 6-3/4" liner size. This model is the first choice for the medium and deep dr... More Info

The Baoji/Bomco F1600HL Triplex mud pump has a max. working pressure of 7,5000PSI and a displacement of 46.5L/S with 6" liner size. This model is the f... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Emsco/Bomco 1600 Mud Pump, Unitized 1600 Mud Pump Powered by Two GE 752 Motors Charging Pump, Liner Flush Pump, Relief Valve, Mud Gauge, Etc. ....Call For Price More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - 1 - Rebuilt Gardner Denver PZ-9 Mud Pump Package, New Caterpillar C-27, 1050 HP diesel engine. Belt-driven. comes with pulsation dampener, discharge block, precharge, li... More Info

Mud Pumps - 1 of 3 used Gardner Denver PZ-8 triplex mud pumps. This would be a good rebuildable core. We also have new, rebuilt and good used pumps and packages available for sale ... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

If you are supplying pump supplies, you can find the most favorable prices at Alibaba.com. Whether you will be working with piston type or diaphragm type systems, reciprocating or centrifugal, Alibaba.com has everything you need. You can also shop for different sizes drilling mud pump price wholesale for your metering applications. If you operate a construction site, then you could need to find some concrete pump solutions that you can find at affordable rates at Alibaba.com. Visit the platform and browse through the collection of submersible and inline pump system, among other replaceable models.

A drilling mud pump price comes in different makes and sizes, and you buy the tool depending on the application. The pump used by a filling station is not the one you use to fill up your tanks. There are high flow rate low pressure systems used to transfer fluids axially. On the other hand, you can go with radial ones dealing with a low flow rate and high-pressure fluid. The mixed flow pump variety combines radial and axial transfer mechanisms and works with medium flow and pressure fluids. Depending on what it will be pumping, you can then choose the drilling mud pump price of choice from the collection at Alibaba.com.

Alibaba.com has been an excellent wholesale supplier of drilling mud pump price for years. The supply consists of a vast number of brands to choose from, comes in different sizes, operations, and power sources. You can get a pump for residential and large commercial applications from the collection. Whether you want a water pump for your home, or run a repair and maintenance business, and need a supply of dr drill mud pump prices, you can find the product you want from the vast collection at Alibaba.com.ther it is for refrigeration, air conditioning, transfer, or a simple car wash business, anything you want, Alibaba.com has it.

If you are supplying pump supplies, you can find the most favorable prices at Alibaba.com. Whether you will be working with piston type or diaphragm type systems, reciprocating or centrifugal, Alibaba.com has everything you need. You can also shop for different sizes mud pump for drilling rig wholesale for your metering applications. If you operate a construction site, then you could need to find some concrete pump solutions that you can find at affordable rates at Alibaba.com. Visit the platform and browse through the collection of submersible and inline pump system, among other replaceable models.

Alibaba.com has been an excellent wholesale supplier of mud pump for drilling rig for years. The supply consists of a vast number of brands to choose from, comes in different sizes, operations, and power sources. You can get a pump for residential and large commercial applications from the collection. Whether you want a water pump for your home, or run a repair and maintenance business, and need a supply ofud pump for drillilling rig, you can find the product you want from the vast collection at Alibaba.com Whether it is for refrigeration, air conditioning, transfer, or a simple car wash business, anything you want, Alibaba.com has answer.

Explore the various mud pump for drilling rig products available for wholesale at Alibaba.com. Get a mud pump for drilling rig for drilling water wells, water exploration holes, geological exploration, coal mines, and other kinds of mining. Some mud pump for drilling rig options use caterpillar tread to move. Others use rubber tires, while others require a separate means of transport. Caterpillar tread propulsion can climb up to 25 degrees inclination. Some products in the range are capable of drilling over 200 meters, while others are only used for open-pit mining with depths of around 3 meters. Drilling can be done vertically downwards, horizontally, or in a slanting direction. Drilling speed depends on the power of the machine and the general hardness of the surface. The hole diameter can vary from 90mm to 200mm.

Rotary table drive, Gardner Denver 5 x 6 FG-41 mud pump, Ingersoll Rand Type 40 air cooled air compressor, munted on 1979 GMC Brigadier J9500 tandem axle truck, 30’ x 9’ x 11’ (10’ with Kelly and lights removed)  Price:  $41,000

Manufactured 1975, double drum, refurbished, air compressor (PTO), 5-1/2 x 8 mud pump, mounted on 1975 International with 6 cyl Detroit diesel engine, 38"9" derrick, 3 lines to hook, 3" swivel (reduced to 2" mud hose), 3-1/2" fluted kelly, 5 ½" stationary table, pipe rack, no pipe available  Price:  $87,500

5 x 6 mud pump, stationary table, 4”  kelly, mounted on 1979 International truck with diesel engine, PTO, pipe racks, 4 hyd leveling jacks, 200’ drill pipe, needs new gearbox  Price:  $62,500

Detroit 671 diesel deck engine, no mud, no air compressor, retractable table, 26’ square Kelly (can run 33’ casing), mounted on 1981 GMC Brigadier with Cat 3208 engine, pipe racks (holds approx. 500’), hydraulic breakout, hydraulic pulldown, air clutches, 3 leveling jacks, 900’ drill pipe, 22’ 3-axle trailer, (2) 4-1/2” x 20’ drill collars, (1) 5-1/2” x 30’ drill collar, misc change overs and pick up plugs  Price:$54,500

Manufactured 1976, 750/250 air compressor, 10” retractable rotary table, Little Giant swivel, mounted on 4 axle Crane Carrier, 400 Big Cam engine (5000 hours), 1000’ of 3-1/2” x 20’ drill pipe (fits on rig)  Price: $117,500

Manufactured 1974, complete rebuild, 5 x 8 high pressure mud pump, 54’ derrick, 7-1/2” retractable rotary table (rebuilt 2018), Cummins 290 on deck, kelly bushing has been replaced, 290 Cummins deck engine, air clutches, wet clutch on main drive replaced, no air compressor, mounted on 4 axle Crane Carrier with 315 Cummins engine, 10 speed transmission, new clutch, tires 90%.  Includes 340’ of 4-1/2” x 20’ drill pipe, 6” stabilizer, 5” stabilizer, new tires (90%), brakes, clutches and bearings have been replaced  Price:  $215,000

Manufactured 1978, PTO, mounted on CCC with diesel engine, (2) 5 x 8 mud pumps, 3 x 4 Mission mud pump, 10" retractable rotary table, 4" fluted Kelly, no air, 4 hydraulic leveling jacks, no pipe available   Price Reduced:$165,000

Manufactured 1977, Cummins 400 Big Cam 3 engine (less than 300 hours since in frame), 5-1/2 x 8 Gardner Denver mud pump, Gardner Denver WEJ 750/250 air compressor with blower, 52" x 100,000# 4-line derrick, 2500" racking board, hydraulic power tongs range 2-3/8 – 4-1/2, mounted on 4 axle Crane Carrier, 4 cylinder Bean mist pump, hydraulic hydramatic trip hold back, hydraulic kelly hold back, 4-1/2" square kelly with kelly cock, 10" Gardner Denver rotary table, swabbing drum with 2000" cable.

Manufactured 1978, 5-1/2 x 10 Gardner Denver mud pump, no air compressor, 10" retractable table, mounted on 1977 Autocar with 350 Cummins engine, PTO, air clutches, 58" extended mast, 4-1/2" x 24" kelly (smaller kelly available), piep rack, breakout tongs, racking boards, chain pulldown, 5 hyd levelng jacks   Price: $165,000

GARDNER DENVER 14W DRILL RIG(Ref#13060Ra)  Manufactured 1973, 650/250 air compressor, Gardner Denver 5 x 6 mud pump, air clutches, 10” retractable table, 40’ mast,  4-1/2” x 25’ kelly, mounted on tandem axle Crane Carrier with 375 hp Cummins engine, 13 speed transmission, 3 leveling jacks, rod box, pipe racking stand, 210’ of 4-1/2” x 15’ drill pipe, running condition, does 65 mph Price:  $74,500

Gardner Denver 5 x 6 mud pump, big air compressor, retractable table, mounted on 1991 International 4800 truck with diesel engine, approx. 193,000 miles  Price:  $110,000

Gardner Denver mud pump, stationary table, 2-7/8" kelly, mounted on 1977International truck, approx. 300’ 2-7/8" drill pipe, 7-7/8" & 9-1/4" bits, running condition  Price:$62,500

Manufactured 1972, mounted on 1991 Morooka MST1500 track with Isuzu 4 cyl motor, dump bed, 100 hp John Deere deck engine, 5 x 6 mud pump, 300 gallon water tank Price:  $100,000

GARDNER DENVER 1000HD(Ref#15652T)  Manufactured 1979, 5 x 6 Failing mud pump, Leroi developmental air compressor, 23’ fluted kelly, 7-1/2” retractable Speedstar table, hydraulic pulldown, air over hydraulic clutches, pipe rack, breakout wrench, mounted on International truck with DT466 engine, 3 hyd jacks, 300’ of 20’ pipe

Manufactured 1957, 5 x 6 Gardner Denver mud pump (new gear end and fluid end), 7-1/2” retractable table, 24’ kelly, 35’ mast, chain pulldown with hydraulic motor, mounted on 1973 Diamond Reo double frame, 290 Cummins engine, 8 speed transmission, engine and transmission new, 2 rear and 1 front leveling jacks, 300’ of 2-3/8” drill pipe, mud pan, 2 bits, ready to work, new cables   Price:  $62,500

MAYHEW 1000(Ref#11322T)  Mounted on 1994 Ford truck, Cat engine, 7-1/2” table, 5 x 6 Gardner Denver mud pump, 23’ kelly, 2” swivel, hydraulic pulldown, water injection pump, 3 leveling jacks  Price:  $60,000

MAYHEW 1000(Ref#8472T)  Set up for drilling and workover, 4” square kelly, stationary table, mounted on 1974 International Lodestar, 5 x 6 Gardner Denver mud pump, no rod box, breakout tongs,  400’ of 2-3/8” x 20’ drill pipe, 10” surface bit, (2) 4” drill collars, 11 new button bits, 3 axle pipe trailer   Price:  $44,500

GARDNER DENVER 1000(Ref#13496T)  Manufactured 1979, 5 x 6 mud pump, 200 cfm air compressor, 5-1/2" retractable table, 3-3/4" x 23" fluted kelly, hydraulic pulldown, mechanical clutches, pipe rack, pipe wrench, mounted on 1979 Ford 9000 truck with Detroit 6V92, 4 hyd jacks, drills daily  Price:  $112,500

MAYHEW 1000(Ref#891Ta)  Manufactured 1978, 5 x 6 Gardner Denver mud pump, Gardner Denver air compressor, 5-1/4" stationary table, mounted on 1997 International truck with Cummins engine, 10 speed transmission, 30" mast, 25" kelly, chain pulldown, 2 rear leveling jacks, 300" of 2-7/8" IF drill pipe  Price:  $79,500

MAYHEW 1000(Ref#891T)  5 x 6 Gardner Denver mud pump, IR air compressor, 7-1/2" Mayhew rotary table, 30" mast, 25" kelly, chain pulldown, air clutch, mounted on 1996 Ford LT9000 truck with Cummins engine, 2 rear jacks, 300" drill pipe  Price:  $89,500

Manufactured 1970, only 200 hours since in-frame overhaul, mounted on 1970 GMC with straight 671 Detroit engine, 5x6 GD mud pump, GD 580 air compressor, 18" kelly, hydraulic pulldown, mechanical clutches, breakout tongs, pipe rack, 1 front screw jack & 2 rear hydraulic leveling jacks, 150" of 2 7/8"IF x 15" drill pipe  Price:  $47,500

Air compressor, 5 x 6 mud pump, 23" kelly, 7-1/2" rotary table, mounted on 1996 International truck with Cummins 350 hp engine, 300" of 2-7/8" OD with 2-3/8 IF drill pipe, air clutches  Price:  $90,000

5 x 6 Garnder Denver mud pump, Gardner Denver air compressor, 5-1/4" stationary rotary table, mounted on 1997 Ford L9000 truck with Cummins 350 hp diesel engine, chain pulldown, 23" kelly, new brakes, new drums, new kelly bushings  Price:  $75,000

mounted on Rio 6x6 with Cat 3306 rebuilt engine, Fuller 10 speed transmission, Gardner Denver 5 x 6 mud pump, Leroi 100s air compressor, 2000 stationary table, 3 ½" x 23" Kelly, water injection pump, 500 gallon water tank, hydraulic pulldown, mechanical clutches, breakout wrench, 2 rear hydraulic leveling jacks, 200 of 2 7/8" x 20" drill pipe and International

Completely refurbished 2010, derrick needs a little work, Mission Magnum Sandmaster 4 x 3 x 13 mud rotary pump, mounted on 1998 Mack CH613, completely with 2-3/8 pipe and various bits  Price:  $167,500

PTO, mounted on 1971 White Constructor with 290 Cummins engine, 6 x 6 Wheatley mud pump, 580 CFM air compressor, custom made 42’ mast, 36’ Kelly, stationary table, mechanical clutches, pulldown, 1 front 2 rear hydraulic leveling jacks, no breakout wrench, no pipe or tools available  Price:  $42,500

Manufactured 1970, PTO, mounted on 1970 Chevy with gas engine, 5 x 6 Gardner Denver mud pump, 185 CFM on board air compressor with John Deere diesel engine, spudding arm, 5-1/4" stationary table, hydraulic pulldown, 3 hydraulic leveling jacks, 23" Kelly, 210" of 2 3/8" x 15" drill pipe, stabilizer    PRICE ON REQUEST

5" stationary table, 4 x 5 Gardner Denver mud pump, developmental air compressor, 4" square kelly, hydraulic pulldown, mechanical clutches, mounted on 1990 GMC Kodiak truck with Cat 3208 engine, 3 hyd leveling jacks, pipe rack, 220" of 2-7/8" x 15" drill pipe  Price:  $49,500

Manufactured 1974, diesel rig engine (blown head gasket, needs work), mounted on Ford F600 truck with 390 gas engine, 3 leveling jacks, 600’ of 2-3/8” x 10’ drill pipe, no pulldown (can put back), truck does not run, sitting a while  Price:  $13,000

Short wheel base, runs 15" pipe, 5-1/4 table, winch, 400/200 air compressor, 8 gpm water injection, mounted on Peterbilt 330 truck with Cat 3126E engine, RT8709B transmission, drill pipe, mud pit PRICE: $97,500

SPEEDSTAR 135(Ref#3612T)  (2) 5 x 6 Gardner Denver mud pump, 7-1/2" rotary table, chain pulldown, 7 speed transmission, 466 engine (210 hp), 1991 International truck, 4 leveling jacks  Price:  $95,000

SPEEDSTAR SS-135 DRILL RIG(Ref#11810Ta)  Manufactured 1976, 5-1/2 x 8 mud pump, 8-1/2” DSM retractable table, mounted on 1994 Ford LN9000 truck with Cat 3306 engine, breakout wrench, rod box, 4 hyd leveling jacks, tools, 1000’ of 20’ 3-1/2” flush wall drill pipe, ready to work  Price:  $112,500

290 cfm air compressor, John Deere deck engine for compressor, 8-1/2” retractable table, hydraulic pulldown, 5 x 6 Gardner Denvermud pump, mechanical clutches, mounted on tandem axle 1997 International 9400 truck with DT466 engine, approx 500’ rods, some tools, good condition, ready to go  Price:$102,500

SPEEDSTAR 135SS DRILLING RIG PACKAGE(Ref#14196T)  Manufactured 1969, mounted on 1998 International 4900 truck, 9 speed transmission, tires 90%, PTO, 7-1/2” retractable rotary table, kelly/swivel, 2 rear hydraulic jacks, 5 x 10 Gaso 300 gpm mud pump (gear end 95%)

Manufactured 1974, Gardner Denver WEJ 1009 air compressor with second stage cooling, Gardner Denver FG-FXF 5 x 6 mud pump, mounted on 1974 Crane Carrier with 8V71N diesel engine (motor refurbished), less than 10,000 miles, PTO, air line lubricator, water injection pump, double drum drawworks, single line pull 15,000#, friction clutches, large brakes, sandreel drum 8000# capacity, 8-1/2” retractable rotary table, pulldown, 2” pitch feed chains, 35’ heavy duty derrick, 4-1/4” x 24’ round kelly bar, 2” water swivel, pipe rack  Price:  $143,000

Available at extra cost:  Stabilizers, subs, assorted drill bits, 6” 8” and 10” hammers, 200’ drill rods on rig, 1000’ of 4-1/2” X 15’ drill rods, fishing tools

Manufactured 1983, 5-1/2 x 8 Gardner Denver mud pump, low pressure piston air compressor (compressor is 2 stage but only the low is working now), mounted on International 4700 with diesel engine, PTO, 11” retractable table, no rod box or pipe rack, some 3-1/2” x 20’ bottleneck pipe included  Price:  $72,500

standard mast & pullback, PTO, mounted on International with diesel engine, GD 5 ½ x 8 mud pump, Leroi air compressor, 500" of 4-1/2 x 20 flush joint drill pipe  Price:  $143,500

Gardner Denver 5 x 8 FXX172 mud pump, air compressor, 9" retractable table, 40" mast, pulldown, mounted on 1977 Crane Carrier, Cummins 855 diesel engine, 3 hyd leveling jacks, drill pipe  Price:$115,000

Manufactured 1977, PTO, mounted on 1977 CCC with 290 Cummins engine, 3x4 centrifugal mud pump, Leroi 500/100 air compressor, 8-1/2" retractable table, 4-1/4" x 23" kelly, breakout wrench, pipe rack, 1 front & 2 rear hydraulic leveling jacks, 300" of 4-1/2" x 20" drill pipe, needs new truck  Price:  $39,500

SPEEDSTAR 1500(Ref#3153T)  500/250 air compressor, no mud pump, rotary table, mounted on Mack truck with diesel engine, PTO, front wheel assist, rod rack, 700’ drill pipe Price:  $72,500

Manufactured 1979, mounted on International Paystar 5000 with 350 Big Cam Cummins engine, PTO, centrifugal mud pump, pipe rack, 3-1/2IF 20’ drill pipe, currently drilling.  Also includes unounted Gardner Denver 5-1/2 x 8 mud pump  Price:  $144,500

Manufactured 1989, PTO, mounted on 1981 International with Cummins engine, 4x3 centrifugal mud pump, 900 CFM air compressor, hydraulic pulldown, mechanical clutches, 4-1/2" retractable table, 3-1/4" x 25" Kelly, chain pulldown, 3 hydraulic leveling jacks, rod box, portable mud pit, 200" of 3-1/2" IF x 15" drill pipe Price:  $115,000

Manufactured 1980"s, Gardner Denver 5 x 6 mud pump, chain pulldown, 4-1/2" kelly, 8-1/2" retractable table, Mounted on 1983 Peterbilt truck with Cummins 350 engine, PTO, 2 rear and 2 front levelng jacks, 800" of 2-7/8" drill pipe  Price:  $122,500

Manufactured 1970"s, mounted on 1991 International with DT466 engine, 4 -1/2 x 5 Failing mud pump, auto chucks, 32" mast, 17" x 2 3/8" kelly, 2 leveling jacks  Price:  $37,500

1500 retractable table, 2-3/8" kelly, mechanical clutches, 5 x 6 Gardner Denver mud pumps, mounted on 1978 I6000 truck, Cat diesel engine, needs work (fluid ends needs rebuildeing, needs new hydraulic banks) Price:  $49,000 PRICE REDUCED: $34,500

1500 drawworks, PTO, mounted on 1996 International 4700 4x2 truck with DT466 engine, (2) drilling pumps:  Failing L100 800 max test pressure, 350 max working pressure and Gardner Denver FFFXFM 148.5 gpm, 639 max pressure, retractable table, mechanical clutches, hydraulic pulldown, 2 3/8” Kelly, 1 front & 2 rear hydraulic leveling jacks  Price:  $38,500

Manufactured 1966, 5-1/2 x 8 mud pump, mounted on 1972 Brockway 10 wheeler  truck with 781 Detroit diesel, PTO, 23’ kelly, 8-1/2” rotary table, breakout table, mechanical pulldown, mechanical clutches, hydraulic quills, 3 jacks    PRICE:  $64,000

Manufactured 1964, 5 x 6 mud pump, 2-3/8” kelly bar, 20” table (opens to 22”), heavy duty mast, 2 winches w/15” clutch, hydraulic pulldown, mounted on 1964 International truck, PTO, double plated frame, 304 International engine, needs minor repairs

Manufactured 1979, 5 x 6 Gardner Denver mud pump, Leroi 50S2 air compressor for drilling, 8” retractable table, 3-3/8” x 23’6”’ kelly, 31’6” heavy duty mast, pulldown, mechanical clutches, Myers water injection, mounted on 1978 GMC Brigadier truck with 3208 Cat engine, 3 hydraulic leveling jacks, 300’  3-5/8 x 15’ drill pipe, bits, subs, good condition    PRICE:  $75,000

Manufactured 1988, no mud pump, no air compressor, 6-1/2” inner diameter / 11” outdoor diameter retractable rotary table, 3-1/2” x 21’ kelly, mechanical chain pulldown, mechanical clutches, rod box, sandline, mounted on 1988 International FSeries 6 x 4 truck with DT466 gas engine, Eaton 10 speed tranmission, 200’ of 2-3/8” drill rod, truck and rig is operatable but could use some work, 3 leveling jacks  Price:  $41,500

Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T300, 3 hydraulic leveling jacks, 260’ of 2-7/8” x 20’ drill pipe, roller and drag bits, very good condition, currently drilling  Price:  $137,500

2500 gallon Flatwater Fleet water tank, 300 gallon fuel tank, pump and hose, 2010 Kaeser M57 210 cfm air compressor (1200 hours), upper platform to carry two (2) pallets, spot lights, toolboxes, 162,000 miles  Price:  $62,500

Manufactured 1974, LeRoi 50S2 air compressor, 5 x 6 mud pump, 5-1/4" retractable table, 3-3/8" fluted kelly, 3 hydraulic leveling jacks, pulldown, mechanical clutches, breakout wrench, mounted on 1974 International tandem axle truck with Detroit 8V71 diesel engine (overhauled less than 1000 hours), 200" of 2-7/8" x 20" drill pipe Price:  $77,500

Manufactured 1973, 5 x 6 mud pump, 8” rotary table, 2-3/8” kelly, mounted on 1966 Kaiser Military 5 x 5 10-wheel truck with 6 cyl diesel engine, 200’ of 2-3/8” drill pipe, truck in fair condition  Price:  $49,000

5 x 6 mud pump, Leroi 50SD air compressor, 5-1/2” retractable table, chain pulldown, mechanical clutches, mounted on Ford truck, PTO, breakout wrench, rod box, approx. 300’ of 3” x 30’ (2-3/8 IF) drill pipe  Price:  $62,500

FAILING 1250 HOLEMASTER(Ref#796T)  Manufactured 1988, 5 x 6 Failing mud pump, (extra 5 x 6 pump included), 85 cfm Atlas Copco air compressor (can be remounted as an auxiliary compressor), 2” diaphragm mud pump, 7-1/2” retractable table, capable of drilling o 16”, mounted on 1988 International truck with DT466 (235 hp) engine, engine rebuilt 2012 with only 4000 hours), 10 speed transmission, 360’ drill pipe, tooling, 4-1/2” – 20” bits  Price:$122,500

Manufactured 1988, PTO, mounted on 1993 Ford 9000 with 250 Cummins engine, 9 speed Fuller transmission, 5 x 6 mud pump, no air, 5-1/4" stationary table, 2" Little Giant swivel, 18" x 3 5/8" round Kelly, hydraulic pulldown, mechanical clutches, breakout tongs, 2 rear hydraulic leveling jacks, 200" drill pipe, ready to go

Manufactured 1972, 5 x 6 mud pump, 50S1 LeRoi air compressor, pulldown, mechanical clutches, mounted on International tandem axle truck with gas engine, 40,000# mast, 15,000# drawworks, 3 drum bailer, single line pull, driller and helper"s platforms, hydraulic pulldown with 1-1/2" pulldown chains, 2" Little Giant swivel, toolracks, 3 hydraulic leveling jacks, 240" of 3-1/2" x 15" FJ (2-3/8 IF) drill pipe, LF breakout wrench, good condition, currently drilling  Price:  $90,000PRICE REDUCED:  $87,500

Manufactured 1980, mounted on 1980 International truck with DT466 engine, 5 x 6 Gardner Denver mud pump, no air compressor, 5-1/4” retractable rotary table, 3-1/2 X 24’ kelly, chain pulldown, 2” swivel, new fuel pump, new head gasket PRICE REDUCED: $48,500 - DEAL PENDING

Manufactured 1970, completely rebuilt, 5 x 6 Failing mud pump, developmental air compressor, sandline, mounted on 1990 Freightliner truck with Cat 3406 (600 hours), 5-1/4" retractable table, rod box, mechanical clutches, chain pulldown, 2" rebuilt swivel, new 32" mast, well maintained, ready to drill, no drill pipe

FAILING 1250(Ref#12693T)  Manufactured 1973, 5 x 6 mud pump, chain pulldown, retractable table, mounted on 1973 International truck, 345 gas engine, no drill pipe  Price:  $54,500

FAILING 1250(Ref#14820T) Manufactured 1965, mounted on 1970 Chevy with gas engine, 5x6 mud pump, 5-1/4” retractable table, 18’ kelly, hydraulic pulldown, mechanical clutches, breakout wrench, 1 front & 2 rear hydraulic leveling jacks, hydraulic pump has been removed, stored inside, sitting but running when parked  Price:$30,000

Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10" stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hydraulic over mechanical jacks, needs new tires

Manufactured 1965, mounted on 1979 International S series 2551 tandem axle truck with DT466 diesel engine, (2) mud pumps: Failing FM45 5 x 6 duplex and Gardner Denver FG FXG 5 x 6 duplex, Ingersoll Rand Type 30 250/125 air compressor hydraulically driven, 26’ x 25,000# derrick, 3-3/8” x 18’ kelly, King 15 KF water swivel, 1-1/4” pulldown chains, 5-1/4” rotary table with locking nut, air controlled clutches, welder, pipe rack, 150 gal mud pit, breakout tongs, 1 front & 2 rear hydraulic leveling jacks, stored inside, sitting but running when parked   Price:$35,000

5 x 6 Wheatley mud pump, Gardner Denver developmental air, hydraulic pulldown, mechanical clutches, stabilizer, mud pan, 3-1/2" kelly, stationary table, mounted on Ford Louisville tandem axle truck with 290 Cummins engine, PTO, 2 rear hydraulic jacks, 200" of 3-1/2" x 20" drill pipe, good condition, currently drilling  Price:  $65,000 PRICE REDUCED:  $50,000

Manufactured 1980, 425 cfm air compressor, 5 x 6 Gardner Denver mud pump, mounted on 1980 International truck with DT466 engine, retractable table, rod box, 600’ drill pipe  Price:  $69,500

3 x 4 Gardner Denver mud pump, 650/50 compressor, PTO, mounted on 1979 International 2-ton tandem axle truck with diesel engine, 3-1/2” kelly, 7-1/2” fixed table, 3 hydraulic jacks, pipe rack, mechanical pulldown, 300’ of 2-7/8” drill pipe (2-3/8 IF)  PRICE:$52,500

Mounted on 1974 Mack truck with V8 Mack engine, new 2" Little Giant swivel, 23" kelly, 5-1/4" rotary table, 256 LeRoi air compressor, 5 x 6 Gardner Denver piston pump, 2 hyd jacks, low hours, ready to work PRICE REDUCED: $72,500

Mounted on 1996 Ford F series 2 wheel drive with 5.9 Cummins diesel engine, 5-1/4" stationary table, 2 3/8" x 15" Kelly, 5x6 GD mud pump, chain pulldown, mechanical clutches, breakout wrench, rod rack, 255" of 15" Mayhew Jr rods, subs, bits, casing elevators, 4 hydraulic leveling jacks, ready to go

4-1/2 x 6 Gardner Denver piston mud pump, no air, 2-7/8" x 18" kelly (runs 10" x 2-708" rods), mounted on 2000 International 4700 w/DT466 engine, no drill rod, Mayhew Junior thread on kelly, all new hydraulic control valves, brakes clutches are all new or have recently been replaced  Price:  $37,500

Manufactured 1985, mounted on Ford F800 4 x 4 truck with diesel engine, front winch, rotary table, drawworks and mud pump are new, set up for 4” wells, drill pipe and tools included  Price:  $49,500

FAILING 250(Ref#3448T)  Manufactured early 1970"s, mounted on Ford 6 wheel drive Ford F750 truck, 391 gas engine, 4-1/2 x 5 mud pump, 290 cfm air compressor, 4" retractable table (no casing can go through), chain pulldown, 2-3/8 kelly, sandline, 10" stroke (can be pulled to 20"), running condition  Price:  $29,500

Manufactured 1980, Midway 1500 drawworks, PTO, mounted on 1980 International f-2574 with 1996 Detroit engine, 10 sp transmission, 38000# rear axles, 24.5 bud wheels, 16000# front axle w/22.5 floatation tires, 4 leveling jacks, 5 ½ x 8 mud pump, new 8-1/2" Midway retractable table, 3-3/4" x 34" fluted kelly (new 2011), 3-3/4" x 5-1/4" new master bushing, 49"2" mast with new cylinders (can run 44"5" casing), 3" plumbing, 2" swivel, 2" kelly hose, hydraulic pulldown, new drivemotor 2013, hydraulic cathead, 792 Spicer transfer case (rebuilt 2013 with air controls), new lifting cylindes on mast, new main hyd pump 2012, 4 part linesm BVM breakout tong, heavy duty work floor with hinged trap door

Manufactured 1975, drawworks completely rebuilt, 7-1/2 x 10 Gardner Denver mud pump, hydraulic pulldown, 54" derrick with racking board, rod box, mounted on 1978 International Paystar 5000 truck with 350 Cummins engine.  Price:$139,500

Manufactured 1975, 600 cfm/150 air compressor, mounted on 1975 Autocar with 350 Cummins engine, new tires, misc tools, bits, Gardner Denver 5 x 6 mud pump, 1998 Ingersoll Rand 600/150 air compressor w/3500 hours on 8/3 L Cummins engine  Package Price:  $112,500

MIDWAY 1500(Ref#15626R)  Manufactured late 1970’s, no mud pump, square kelly, no pulldown, 8” retractable table, mounted on newer Freightliner truck with diesel engine, air clutches, no pulldown, breakout tongs, 1 front and 2 rear hydraulic leveling jacks, no rod box, no pipe rack, 300’ of 20’ drill pipe (2-3/8” IF),  Price:  $54,500

Manufactured 1977, 600 cfm Leroi air compressor, 5 x 6 Gardner Denver mud pump, 8-1/2" table retractable, pull down, 9 gpm Bean pump, mounted on 1977 Ford 9000 truck with 671 Detroit engine (overhauled 2014), 600" of 2-7/8" drill stem, well maintained, ready to work  Price:  $162,500 PRICE REDUCED:  $105,000

Manufactured 1978, PTO, mounted on 1979 Ford 9000 with Cat engine, 5x6 mud pump, Leroi 750cfm air compressor, 3" x 23" kelly, 8" stationary table, breakout wrench, rod box, hydraulic pulldown, mechanical clutches, mud pan, 300" of 2 7/8" x 20" drill pipe, no leveling jacks, good running condition

PTO, mounted on 1991 Mack with diesel engine, 5x6 mud pump, GD air compressor, 7-1/2" stationary table, pulldown, manual clutches, rod rack, 2 hydraulic leveling jacks, good condition  Price:  $67,500

3 drum drawworks, mechanical clutches, Spicer air shift PTO, 2 rear hyd leveling jacks, 8” retractable table, 3-1/2” x 24’ square kelly, 2” Little Giant swivel, new 3 x 4 Mission mud pump, hydraulic pulldown, mounted on 1993 Freightliner truck with Cat 3406 engine, approximately 400’ of 2-7/8” full hole drill pipe  Price:  $62,500

Manufactured 1978, Triple drum, new bearings on drawworks and pulldowns, 5-1/2" x 8" Gardner Denver duplex mud pump, no air compressor, 57" x 60,000# hydraulic raised mast, Racking board, Mounted on 1978 Kenworth tandem axle truck with 8V92 Detroit diesel and PTO, 4 hydraulic leveling jacks and 2 rear screw jacks, Hydrostatic drive drawworks and rotary table, water injection, 8-1/2" retractable rotary table (4 speed transmission on rotary table), will run Range 3, 4-1/2" x 25" kelly, 4 speed hyd pulldown

Manufactured 1984, Leroi 600/250 air compressor, 5-1/2 x 8 duplex mud pump, 53’ tubular mast, racking bord, hydrostatic double drum drawworks, 7-1/2" hydrostatic rotary table, hydraulic pulldown, 24’ kelly bar, 3000’ capacity sandline, mounted on 1982 Kenworth C500 truck with 6V92TAC Detroit diesel, breakout tongs, hydraulic breakout wrench, hydraulic cathead with spinning chain, pipe rack, 1 front and 2 rear hydraulic jacks, 2-7/8" upset x 20’ pipe, 4-1/2" flush joint x 20’ pipe  Price:  $194,500

Manufactured 1978, Triple drum, new bearings on drawworks and pulldowns, 5-1/2" x 8" Gardner Denver duplex mud pump, no air compressor, 57" x 60,000# hydraulic raised mast, Racking board, Mounted on 1978 Kenworth tandem axle truck with 8V92 Detroit diesel and PTO, 4 hydraulic leveling jacks and 2 rear screw jacks, Hydrostatic drive drawworks and rotary table, water injection, 8-1/2" retractable rotary table (4 speed transmission on rotary table), will run Range 3, 4-1/2" x 25" kelly, 4 speed hyd pulldown

Manufactured 1976, PTO, mounted on International Paystar 5000 with rebuilt 350 Cummins engine, 6 x 8 Gardner Denver mud pump, 256S2 Leroi compressor, Bean water injection, 7-1/2" retractable table, 53" hydraulically raised mast, hydraulic pulldown, hydrostatic, breakout tongs, 4-1/2" hex Kelly (fluted available) no pipe rack or rod box

Manufactured 1974, 5-1/2 x 8 Gardner Denver chain driven mud pump (rebuilt), 256 LeRoi air compressor (rebuilt), 7-1/2” retractable table, mechanical clutches, pulldown, 4-1/2” x 23’ kelly (mast is set up for 30’ kelly), mounted on 1999 Kenworth truck with 440 hp Cat engine, PTO, pipe spinner, breakout tongs, water injection pump, 3 hydraluc leveling jacks, good condition,  rebuilt hydrostate, chain cases and rotary table, 200’ drill pipe and tools    Price:$175,000.

Manufactured 1974, PTO, mounted on 1974 Diamond Rio with Detroit 8V92 Detroit engine (3 years old), extended mast, rebuilt drawworks & Leroi 256S2 air compressor, no mud, sandline, 4-1/2" x 23" Kelly, breakout tongs, 8" retractable table, air clutches, hydraulic pulldown, pipe rack, 1 front & 2 rear hydraulic leveling jacks, 200" of 4-1/2" x 15" drill pipe, rig in operating condition Price:  $100,000 PRICE REDUCED: $79,500

Manufactured 1976, 3 x 4 centrifugal mud pump, LeRi 256S2 air compressor (very low hours on rebuilt), Detroit 8V92 deck engine, mounted on 1976 Paystar 5000 truck with International diesel engine, 3 hyd leveling jacks, 8-1/2" retractable table, 4-1/2" fluted kelly, new swivel, racking board, 38" mast, BJ tongs, air hammer, spare TKT transmission, some tools,

Manufactured 1972, Detroit 318 engine, 7-1/2” retractable table, 4” x 36’ kelly, chain pulldown, mounted on International 4900 tandem axle truck with 466 DT engine, 10 speed transmission, 400’ of 4-1/2” x 20’ (3-1/2 IF) drill pipe, 700’ of 4” x 30’ FH drill pipe, handling tools, last used 2021, 4 x 3 centrifugal MCM pump with John Deere engine  Price:$93,500

Manufactured 1979, mounted on 1979 International Paystar 5000 truck, 5 leveling jacks, 7-1/2" retractable rotary table, 26" kelly, 2" Little Giant swivel, 5-1/2 x 8" Gardner Denver mud pump, 256 LeRoi air compressor, racking board, currently working PRICE REDUCED: $92,500

PORTADRILL 120(Ref#9801T)  Manufactured 1968, 5 x 6 Gardner Denver mud pump, 6" stationary table, 3-1/2" x 23" kelly, mounted on 1987 Peterbilt with diesel engine, PTO, pipe rack

Built 1986, approx 540’ depth, double drum (shop build with triple clutch on each side), Gardner Denver 5 x 8 mud pump, 2” DSM swivel, 8-1/2” retractable table, trailer mounted, 46’ mast mechanically raised, 4” square kelly, 420" of 2-7/8" drill pipe  Price:  $47,500

Detroit V8 engine, 11 speed transmission, 5 x 10 Gaso hydraulic mud pump, 42’ mast, 8-1/2” retractable table, 4-1/2” x 25’ fluted round kelly, hydraulic drive winch, mounted on 1980 International, 4 hyd jacks Price:  $137,500

INGERSOLL RAND RO-300 DRILL RIG(Ref#1555Tb)  Detroit V8 engine, 11 speed transmission, (2) 5 x 6 Gardner Denver hydraulic driven pumps, 8-1/2” retractable table, 42’ mast, hyd driven double drum winch, w/ram driven kelly, 5-1/2” x 25’ kelly, mounted on 1981 International Paystar truck, 4 hyd jacks  Price:  $137,500

Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pump and compressor run off Handona gas engines, boom will handle 10’ or 20’ rods, mounted on 1998 Ford 700 2 wheel drive truck, 7 ltr propane engine, (2) tanks (40 and 80 gal), drilling, hydraulics and truck run on propane, 500 gal water tank, pipe rack, compact rig.  Includes approx 120’ of 1-1/4” x 10’ rods, bits for 1-1/4”, 2” and 4” wells,  Price:  $30,000

Manufactured 1974, mounted on 1974 Ford LN8000 with rebuilt Cat 3208, new front tires, no ruse, LeRoi compressor, 5 x 6 Gardner Denver mud pump, injection pump, new 2” plumbing, 8” retractable table, 3 hyd jacks, rod rack, 5 stabilizers 6”-12”, 19 rods of 2-7/8”, 26 rods of 3-1/2”, several bits and subs 4”-10”

Manufactured 1973, 5 x 6 Gardner Denver mud pump (new pistons and liners 2016), 50 SDS air compressor, bailing drum, 24’ kelly, 8-1/4” retractable table, hydraulic pulldown, air clutches, mounted on 1989 Chevy Topkick with Cat 3208T, rod box, 300’ of 3” drill stem, tools, well maintained  Price:  $47,500  Additional pipe available at extra cost.

EWBANKS 50(Ref#13911Ra)  4 x 5 mud pump, mounted on 1978 International single axle truck, Cat 3208 engine, PTO, 5-1/4” stationary rotary table, no air, square kelly, mud pan, pipe rack, 200’ pipe  Price:  $37,500

Built 1986, mounted on 1986 GMC Brigadier truck with Cat 3208 engine, Ford 4 cylinder Industrial deck engine, 5 x 6 mud pump, 1 mainline winch, 1 sandline winch with free fall, sitting outside for a while, was in proper working condition when parked Price on Request

Manufactured 1973, 871 Detroit diesel on deck, 450 cfm Bendix Westinghouse air compressor, no mud pumps but hydraulics are there, 4” kelly, 8” retractable table, bailing line, mounted on 1972 Ford F900 tandem axle truck with 434 gas engine, 3 hydraulic jacks, 200’ of 4-1/2” x 15’ drill pipe, sitting since 2019  Price:  $37,500

4 cylinder Ford diesel engine on deck, 38" hydraulically raised mast, 5-1/2" table retractable to 18" x 12" deep, 3-1/2" x 20" fluted Kelly, drill line drum, sandline drum and casing drum (no line on rig).  2-part block, shock in the crown for cable drilling,  Mounted on 1992 Ford L7000 all-wheel drive truck with 6 cyl Ford diesel engine, automatic transmission with big hydraulic pump, low miles, 3 hydraulic leveling jacks, needs new hoses and swivel.  Price:  $32,500 - Oklahoma

CYCLONE 35R(Ref#6558T)  5” Gardner Denver mud pump with 3 cyl diesel engine, no air, square kelly, retractable table, hydraulic pulldown, pipe rack, 4 cylinder diesel deck engine, mounted on 1985 Mack twin screw with diesel engine, 3 hyd leveling jacks, 300’ of 2” x 16’ drill pipe  Price:  $64,500

Built 1966, 5 x 6 mud pump, developmental air compressor, mounted on 1966 Ford F950 Super Duty with gas engine, (2) gas deck engines (one runs rig, one runs air compressor and mud pump), 240’ drill rod, 15’ sub and bit  Price:  $29,500

Built 1980’s, trailer mounted, new swivel, 420cc engine, 250’ – 500’ depth, 30 gpm hydraulic pump (newer hoses), 2000# electric winch, 2” mud pump, 2 gpm mist pump, 250’ of 10" drill pipe, 2 drill collars, tooling, bit, subs,.  180 cfm Sullair compressor, water tank/pipe trailer  Price:  $46,500

Built new 74 HP Kohler Tier 4 Turbo diesel industrial deck engine, Industrial Permco dual 28 gpm main pump w/vari speed split driver circuits in volve controls, 3 x 2” MCM Model 118 mud pump 350 gpm/95 psi, 150 rpm main drill head 1000 ft/lb torque, 55 gal hyd reservoir, 12,000# push/pull force w/chain hoist drive, 16’6” tubular 4x6 mast 12’ stroke, designed for 10’ Mayhew Jr drill pipe, 82000 BTU hydraulic oil cooler, swivel with extreme duty 18,000# twin thrust bearing set and shevron seals w/changeable ware sleeves, hydraulicuniversal breakout system, swing away drill head, ½” minimum watercourse through all piping, 22 gallon fuel tank, 20’ of 3” charge line, 20’ of 2” bypass hose w/cam locks, 12 volt primer and wash down pump, removable drill pipe guide, 1200# hydraulic accessory host telewscoping to 22’ height for casing work w/drill pipe tool for lifting and handling drill stem.  Weight (skid mounted unit):  6500 lbs., dimensions (trailer mounted) 110” long x 90” wide (will fit in 20’ shipping container)  Price, skid mounted:  $59,500  Price, trailer mounted:  $69,500

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

We offer a vast range of new and used well drilling equipment, well drilling services rigs, pump hoist rigs, mud pump systems, and lifting tools. Our online listing of well drilling equipment is updated regularly to provide you with the most current information on well drilling rigs and well drilling equipment that we have available. If you are unable to locate the information you are looking for, we still may be able to accommodate you, so please contact us for assistance.

Drilling Equipment Sales, Inc. is the premier dealer for well drilling equipment; whether you are seeking new or used equipment we will work to accommodate your needs. We offer a wide variety of new and used well drilling equipment manufactured by Atlas Copco, Centerline, Driltech, Failing, Flatwater, Freightliner, Gus Pech, Ingersoll-Rand, Mudslayer, Pulstar, REICHdrill, Rose-Wall, Hunke, Smeal, and Walker Neer.

We provide a variety of drilling equipment and rigs from quality manufacturers in the industry. Drilling Equipment Sales, Inc. offers new and used equipment so that all of your drilling equipment can be met. If you need well drilling equipment, well drilling service rigs, mud pump systems or pump hoist rigs, Drilling Equipment Sales, Inc. can provide all of this and more.

We, at Waters, provide high-standard, quality built mud pumps and its parts for oil and gas drilling operations on sale! We provide both sparingly used mud pumps and its parts to our customers in Houston and other areas in the United States.

In a tight market, leasing or renting rig equipment is the smart move. Waters International offers its customers a wide range of leasing and rental programs that can significantly reduce capital costs and accelerate ROI

The drop-down menu at the top lists the items we usually have in-stock. All of them are also normally available for sale or for rent. Rental products also include additional systems such as Triplex Mud Pumps (Diesel or Electric), Mud Tanks and Solids Control Equipment. For fast and easy equipment request, we have provided online forms customized to each specific area of interest. The photos below illustrate just a few of the items available in our inventory.

The mud pump is an integral part of drilling operations. Also called mud drilling pump, it is a kind of plunger pump or a reciprocating piston, which circulates the drilling fluid through the drill string and back up the annulus. The operation takes place under very high pressure of about 7,500 psi or 52,000 kPa.

Waters provide mud pumps of varying configurations and sizes according to our customer’s requirements. Every oil rig requires a different kind of mud pumps and parts. That is why, at Waters, we offer customized mud pumps according to your requirements. Be it the triplex or three-piston pump for the petroleum rig or the duplex mud pumps, we have with us a wide range of products to satisfy your oil rig specifications.

A mud pump is pivotal to rig drilling operations and at Watersintl, we attach great importance to the quality, make and build of every drilling rig mud pump that we offer for rental. With competition causing margins to shrink, the way to financial and operational success is mud pump rental.Operational efficiency is the key to success and a mud pump can actually be the single biggest contributor to drilling operations. With a lot riding on the capacity and rugged build of a mud pump, a rental is definitely a better choice.

We, at Waters, believe in quality over quantity. For the past five decades, we have gathered enough inputs and experiences to ensure our clients go satisfied after the purchase of our mud pumps and parts.

We, therefore, offer a comprehensive price range on our mud pumps for drilling in Houston. We have both sparingly used and new mud pumps to suit our customers’ requirements. Whatever your budget is, we will provide you the best choice in mud pumps and promise to deliver quality products at an affordable price range.

We know how difficult it is to find that one perfect part or the whole mud pump to fit in your drilling operations. That is why; we keep minimum delivery time to ensure our customers do not suffer downtime.

If you are looking for a mud pump, we would be happy to help! Just call us with your requirements or talk to our experts to know more about our mud pumps and other products!

At Watersintl, our specialization in equipment for drilling, lends us with greater exposure on the all- important mud pump, permitting us to offer the best models. Choose from a wide range of models that feature on our list of equipment available for rental. Benefit from our technical expertise that improves the operational efficiency and reliability of every single mud pump we offer on rent. The inspection routines and servicing that we follow transforms every mud pump into a rugged workhorse that will help you improve operational ability. Browse through our extensive list of drilling equipment and benefit from qualitative superiority and our reputation as one of the very best in the industry.

The effectiveness of triplex mud pumps for sale determines the success of drilling operations in rigs. Circulation of the drilling fluid or mud is a continuous process that calls for uninterrupted operations of the mud pumps. Finicky about how our equipment work, we at ShalePumps, go to extreme lengths before engineering modern beasts for continuous drilling operations in rigs.

Our state of the art Houston facility develops high performing mud pumps for drillings rigs by a combination of the best materials, and structural dynamics to put together some of the best equipment. Designed to be adapted for various drilling applications in rigs through designs that incorporate various liner sizes, the triplex mud pumps for sale that leave the assembly line at ShalePumps are mean and mighty workhorses. The triplex mud pumps feature high performance steel power ends, balanced forged steel crankshaft, steel herringbone gears and anti-friction roller bearings. Striking the right balance between weight and performance, the triplex mud pumps for sale we make are best for drilling operations in rigs.

The triplex mud pumps manufactured at ShalePumps have extended continuous duty cycles, and foolproof lubrication systems for smooth drilling operations in rigs. With mud pumps from ShalePumps the drilling operations in rigs will never be the weak link, but a pivot that spells success.

ShalePumps, LLC is proud to introduce the SP-1614 1600 HP Continuous Duty Triplex Drilling Pump. Engineering and rated for 1600 horse power at 110 strokes per minute with a 14” stroke capable of 7500 PSI. Manufactured in our Houston Texas facility, this pump defines longevity, quality and capability. The SP-1614 is designed to incorporate minimum weight and maximum performance using a high performance steel power end, a balanced forged steel crank shaft, steel herringbone gears and anti friction roller bearing throughout. Multiple liner sizes are available to allow variance in pressure and output volume for a variety of drilling applications. Download the performance chart for more detailed information.

All Categories2 phase separator (6)Separator (6)3 yard dump truck (3)Dump (2)Dump truck (1)Air Compressor (3)Compressor (2)Oil Free Compressor (1)Backhoe (14)710 (1)Back hoe (2)Digger (3)Excavator (2)Extenda hoe (2)Loader (1)Rear Actor (1)Tractor (2)Boom (14)Aerial work platform (1)Basket crane (2)Boom Lift (1)Cherry picker (2)Elevating platform (1)Lift (2)Man lift (1)Manlift (1)Mobile elevating work platforms (2)Reachlift (1)Boom Lift (4)Boom (1)Cherry picker (1)Man lift (1)Reach lift (1)Bucket Truck (2)Lift Truck (1)Man lift (1)Cart (3)Mule (1)Side by side (1)UTV (1)Centrifugal Pumps (3)Centrifugal Pumps (2)Centrifuge (246)Centrifuge (20)Decanter (86)Dewatering (22)Disc Stack (1)Drilling Equipment (34)Processing Equipment (34)Solids Removal (23)Water Treatment (24)Centrifuge Stand (2)Centrifuge (2)Compactors (3)Double Drum Roller (3)Construction (1)Backhoe Loaders (1)Control Panel (3)Centrifuge (3)Conventional Trucks (2)Day Cab Trucks (2)Crane (9)Crane (1)Crane Truck (1)Crawler crane (1)Telescopic Crane (2)Truck Mounted Cranes (4)Cryogenic Tank (1)LNG Tank (1)Cuttings Dryer (10)Centrifuge (1)Control Panel (2)Drilling Equipment (1)Dryer (4)Solids control (1)Solids Removal (1)Desander (1)Drilling Equipment (1)Desilter (1)Drilling Equipment (1)Diesel Engine (4)Caterpillar (1)Diesel (1)Diesel Engine (1)Engine (1)Drilling (1)Swivels (1)Drilling Equipment (32)Blowout Preventer (1)Centrifuge (5)Cuttings Dryer (1)Drilling (1)Dryer (1)Mud Cleaning (1)Mud Pump (1)Mud Recycling (1)Power Swivel (2)Processing Equipment (4)Shale Shaker (7)Solids control (5)Solids Removal (1)Tanks (1)Drilling Rigs (6)Drilling Equipment (1)Workover Rig (5)DUMP TRUCK (3)10yard (1)DUMP (1)HAULER (1)Engine (1)Natural Gas (1)Excavator (4)145 Excavator (1)30,000 LBS Excavator (1)Digger (1)Heavy machinery (1)Forklift (8)Case (1)Fork Lift (1)Lift (1)Rough Terrain (1)Rough Terrain Forklift (1)Toyota (1)Warehouse forklift (2)Fuel & Lube Trucks (1)GENERATOR (3)POWER (1)TEMP POWER (2)Heater (2)Electric (2)Inline Heater (1)Heater (1)Kill Truck (1)Vacuum Truck (1)Light Tower (7)Disel Engine (3)Generator (1)Light (1)Light Plant (1)Tower (1)Mini Excavator (2)Excavator (1)Mini Ex (1)Mixing Tank (13)Centrifugal Pumps (1)Diesel Driven (1)Diesel Engine (1)Drilling Equipment (1)Mix Tank (1)Mixing (1)Mud Recycling (1)Mud Tank (1)Shaker Tank (1)Tank (4)Mud Pumps (8)Drilling Equipment (1)Gardener Denver (1)Mud Pump (3)Processing Equipment (1)Triplex (1)Triplex pump (1)Oil, Gas and Mining (49)Coiled Tubing (14)Cuttings Dryer (1)Drilling Rigs (5)Fishing Tools (1)Frac blender (1)Frac Pumps (24)Hydraulic Rig (1)Transmission (1)Triplex Pump (1)Oilfield Equipment (7)Power Swivel (7)Parts (1)Dryer (1)Pressure Washer (7)Processing Equipment (85)Air Stripper (1)Artificial Lift System (1)Centrifuge (46)Dewatering (1)Dryer (1)Filter Press (1)Mix Tank (2)Oil Water Separation (3)Pump Jack (1)Remediation (1)Rod Pump (1)Shale Shaker (14)Solids Control (2)Vessels (2)Water Filtration (1)Water Softener (1)Water Treatment (4)Wemco (2)Pump (13)Centrifugal Pump (2)Centrifuge Feed Pump (1)Diesel Driven (1)Lobe Pump (1)Mulitstage Pump (1)Positive Displacement Pumps (4)Rotary Lobe Pump (1)Self Priming (1)Trash Pump (1)Reach Forklift (3)Forklift (1)Reachlift (1)Up and over (1)Reach Lift (9)FORKLIFT VARIABLE REACH (3)Lift (3)Telehandler (3)SCISSOR LIFT (20)Boom Lift (2)Cherry picker (3)Lift (4)MAN LIFT (2)Manlift (3)REACHLIFT (1)Rough Terrain (1)Scissor (4)Shale Shaker (8)Centrifuge (1)Screens (1)Shaker (3)Shaker Screens (1)Shale Shaker (1)Solids Removal (1)Skid steer (6)Bobcat (2)Skidsteer (2)Track (1)Track Skid steer (1)Stand Centrifuge (7)Centrifuge Stand (7)Tanks & Kettles (1)Coalescer (1)Three phase separator (7)Separator (7)Top Drive (5)Drilling Equipment (1)Drilling Rig (1)Hydraulic (1)TOP DRIVE (1)Well Service Equipment (1)Trash Pump (5)Centrifugal Pump (1)Diesel Driven (1)Diesel Engine (1)Trash Pump (1)Water pump (1)Truck (6)Crew Cab (1)Kill Truck (1)Pickup (1)Reefer Trucks (1)Service & Utility Trucks (2)Vacuum trailer (2)Vac trailer (1)Vacuum (1)Vessels (7)Acid Tank (1)Frac Gel (1)Frac Tank (1)Mud Tank (1)Tank (1)Truck (1)Water tank (1)Warehouse Forklift (2)6k Forklift (1)Forklift (1)Water Treatment (2)Reverse Osmosis (2)WATER TRUCK (3)Tank (1)TANK TRUCK (1)WATER (1)Welder (2)300Amp welder (1)Big Blue (1)WHEEL LOADER (1)3 YARD WHEEL LOADER (1)Winch Trucks (1)

Having a quality mud pump is a critical part of keeping your oil well drilling system running as smoothly as possible. Dragon carries a wide range of mud pumps for systems of all kinds and jobs of all sizes. We also carry a 50 BPM mud mixing table to make drilling fluid mixing more efficient and accurate so you can always get the job done safely and correctly. View our full well service pump and mud pump selection to find the right system for your job site, or check out the rest of our drilling rigs for even more options.