mud pump liners supplier

Titan Oil Tools offers high quality mud pump expendables and mud pump replacement parts for the wide variety of mud pumps, centrifugal pumps found on the world market today. These quality pump parts offer great performance and our pricing will save you money.

We are your oilfield supplier of choice for mud pump spares and mud pump parts: mud pump piston liners and pistons. All mud pump parts can be sourced for fast delivery; Come to us for mud pump liners, pistons, piston rods and parts, pony rods, threaded rings and caps,and more. Try us for duplex and triples pump spares and duplex and triplex mud pump parts, and also valve parts like valve seats. gland nut, and mud pump gaskets.

Mud pump liners may come in chrome, alumina ceramic and zirconia ceramic. Chrome liners and alumina ceramic liners are less costly, their cost of replacement over one year as the chart below shows, is much more than zirconia ceramic liners.

The table below shows a Mud Pump Liner Cost of Ownership which shows a reasonable cost comparison for a rig in continuous service for 36 months. This of course does not include the high cost of maintenance downtime and the cost of labor.

The prices below are based on cost/cylinder. Savings increase when you add up the number of pump cylinders on your rigs and extend the savings to understand the big difference it can make for your budget.

Alibaba.com offers 1113 mud pump liner products. About 56% % of these are mud pump, 7%% are mining machine parts, and 3%% are other oil field equipments.

A wide variety of mud pump liner options are available to you, You can also choose from oil well, mud pump liner,As well as from carbon steel, chromium, and iron. and whether mud pump liner is moulding, bending, or punching.

TR provides high quality Mud Pump replacement parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve & Seat etc. We are dedicated to assisting worldwide clients with most cost-effective and quality guaranteed mud pump liners, pistons and other mud pump replacement parts. Reducing the mud pump production cost is our priority so that significant saving can be achieved for our valuable clients and end users.

TR liners offer both ceramic mud pump liners and high-chrome mud pump liners (bimetal liner) with excellent resistance to abrasion, erosion and corrosion for most mud pumps in worldwide. Advanced anti-wear measures are adopted and highest-grade materials are selected in our mud pump liners production to increase their service life, which can reduce our clients’ investment cost of the project, and improve their production efficiency.Replacement Mud Pump Liners for Gardner Denver PZ 6/7/8/9/10/11

TR provides a wide series mud pump liners for all major brand mud pumps. We also offer custom design-built service per our clients’ drawings and specifications

TR also offers high quality replacement parts for all major brand mud pumps including valve module, piston/extension rods, pistons, valves and seats etc.

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

Bi-metal liners (double metal liners) are made of forged steel shell and wear-resistant sleeve of high chromium iron. In the production process, the size accuracy should be strictly controlled, which can ensure that they can be easily and stably installed. The inner sleeve with high finish and hardness is wear-resistant, corrosion-resistant and has a long service life. The bi-metal liners are suitable for a lot of bad working conditions. Its service life is more than 800 hours.

Ceramic Liners are made of a ceramic inner sleeve and a forged steel outer shell. The service life of ceramic liners is about 4000 to 10000 hours, the minimum time is at least 2000 hours, which is a lot more than bi-metal liners. Because of the phase transformation toughen technology, the ceramic liners have the features of wear-resistance, erosion-resistance, high-pressure-resistance, high hardness and strength. Zirconia type and Alumina type are common type of ceramic sleeve. Compared with Alumina type, Zirconia type liners have better toughness properties and a much longer service life. Piston wear and water consumption for lubrication can be reduced as well.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

Since 2001, TSC Manufacturing and Supply, LLC has been a leading global manufacturer and supplier of fluid end expendables, as well as mud pump spare parts for oilfield applications. Today, we continue to keep our proud tradition of excellence going, as we strive to better ourselves in order to better our customers" experience. Our global network of inventory locations provides unrivaled quality, customer service, on-time delivery, and unmatched technical integrity.

When it comes to mud pump fluid end expendable parts, TSC Manufacturing and Supply, LLC, has it all. TSC can, and will, match your needs, so that you won’t be lacking in anything. TSC mud pump liners are designed and manufactured to meet or exceed original equipment specification and API standards for almost all types of mud pumps in use today. With advanced technology, metallurgical control, and rigid inspection, we offer unmatched performance and durability, according to customer testimonies, in the most severe drilling conditions; both triplex and duplex liners are available in a wide range of sizes.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.

Premium Rig Parts is a leading manufacturer and supplier of mud pump parts, drilling rig expendables to the oil drilling industry. Our specialties include, but are not limited to, expendables for mud pump systems including Emsco, Brewster, National ... ... Read More

Mud pump is the "heart" of oil drilling system while mud pump liner an important disposable quick-wearing part of the fluid end. Therefore, the quality of mud pump liner will directly affect the normal operation of the drilling rig and thus the drilling costs.

Bi-metal liner is one of the most widely used types of liner. Our product combines the virtue of high strength forged steel shell and the advantage of anti-abrasive corrosion-resistant high-chromium sleeve together. The shell, including lip sleeve, is forged with high-quality carbon steel. The inner sleeve made of high-chromium cast iron is processed by centrifugal casting, the hardness of which is up to HRC 62 after heat treatment, could withstand a mud pressure of 7000 psi.

Ceramic liner is applied to well drilling operations for deep reservoir and complicated geologic situations, and is also used for offshore oil and gas development. The hardness of the working surface of the inner sleeve can reach HRC89 or more while the bending strength can be up to 1000-1200Mpa. Our ceramic liner is able to withstand a maximum pump pressure of 70Mpa. It is anti-abrasive, corrosion-resistant, heat-resistant, pressure-resistance, and is of high strength and high rigidity.

Piston assembly is one of the main parts of the fluid end of the mud pump. The volume of the working chamber alters with the reciprocating of piston, and thus realize a liquid suction and discharge through the pump valve. We are able to provide superior replaceable rubber piston and bonded piston.

Valve and seat make up a valve assembly that is the major component of the fluid end of the mud pump. It is also one of the most consumed vulnerable part during drilling.

FET manufactures a full range of valves and seats for every drilling and well-servicing application as part of our full line of Osprey® mud pump system solutions. All of our valves and seats can be used in water, water base, oil base and synthetic base mud applications. FET offers additional valves and seats not listed below, including drilling valves, frac valves and well service valves. FET’s QC standards for the dimensional and material specs are extremely rigid in comparison to other manufacturers. Contact your FET representative to learn more.

We have in stock supply of mud pump liner ready to be deliverd, please order today for great offere thanking you Mff-Oilfield, Mud pump liner used in manyread more...

We are appreciated for providing our clients with a commendable gamut of Mud Pump Liner. Fabricated by making use of supreme quality required basic material, these offered products conform with the defined parameters of the industry. Furthermore, we have made the offered products available in different sizes and specifications so as to meet divergent demands of the clients.read more...

Being a customer-oriented organization, we are passionately engaged in providing a broad gamut of Pump Liner. Designed and engineered with the use of unmatched quality components that are sourced from the trusted vendors of the industry, the provided products are highly demanded by our clients for their low maintenance. Inread more...

Mud Pump Spare Parts We can offer the mud pump spare parts covers the liners, valves and seats, pistons etc to match the most types of mud pumps in the market, like Emsco, Gardner Denver, National, Oil well, Continental, Ideco, and China 3NB etc Brand Model Emsco F-350 F-500 F-650 F-800 F-1000

Carbon/Stainless Steel Quintuplex 1000HHP Basic Parameters: Stroke: 6” Material: Carbon Steel/Stainless Steel Plunger No.: 5 Plunger size: 2.75”,3”,3.5”,4”,4.5” Load Weight: 2,500LB Approx. Size: 46”x12”x20”(LXWXH) We manufacture and provide Fracturing Pump Fluid Ends. Our high pressure pump fluid ends mainly cover...

Carbon/ Stainless Steel Triplex 600HHP Basic Parameters: Stroke: 6” Material: Carbon Steel/Stainless Steel Plunger No.: 3 Plunger size: 2.75”,3”,3.5”,4”,4.5” Load Weight: 1,550LB Approx. Size: 28”x12”x19”(LXWXH) We manufacture and provide Fracturing Pump Fluid Ends. Our high pressure pump fluid ends mainly cover...

Carbon/Stainless Steel Quintuplex2700HHP Basic Parameters: Stroke: 10” Material: Carbon Steel/Stainless Steel Plunger No.: 5 Plunger size: 3.75”,4”,4.5”,5” Load Weight: 5,500LB Approx. Size: 59”x24”x26”(LXWXH) We provide and manufacture high pressure triplex/ quintuplex plunger pump fluid ends for the fracturing job....

Carbon/Stainless Steel Y block Quintuplex 2800HHP Basic Parameters: Stroke: 8” Material: Carbon Steel/Stainless Steel Plunger No.: 5 Plunger size: 3.75”,4”,4.5”,5” Load Weight: 6,300LB Approx. Size: 63”x20”x24”(LXWXH) We provide and manufacture high pressure triplex/ quintuplex plunger pump fluid ends for the...

Carbon/Stainless Steel Quintuplex 2500HHP Basic Parameters: Stroke: 8” Material: Carbon Steel/Stainless Steel Plunger No.: 5 Plunger size: 4”,4.5”,5”,5.5”,6”, 6.5” Load Weight: 4,800LB Approx. Size: 52”x19”x23”(LXWXH) We provide and manufacture high pressure triplex/ quintuplex plunger pump fluid ends for the...

Carbon/Stainless Steel Triplex 2250HHP Basic Parameters: Stroke: 8” Material: Carbon Steel/Stainless Steel Plunger No.: 3 Plunger size: 4”,4.5”,5”,5.5”,6” Load Weight: 3,350LB Approx. Size: 36”x19”x23”(LXWXH) We provide and manufacture high pressure triplex/ quintuplex plunger pump fluid ends for the fracturing job....

Carbon/Stainless Steel Quintuplex 1000HHP Basic Parameters: Stroke: 6” Material: Carbon Steel/Stainless Steel Plunger No.: 5 Plunger size: 2.75”,3”,3.5”,4”,4.5” Load Weight: 2,500LB Approx. Size: 46”x12”x20”(LXWXH) We provide and manufacture high pressure triplex/ quintuplex plunger pump fluid ends for the fracturing...

Carbon/ Stainless Steel Triplex 600HHP Basic Parameters: Stroke: 6” Material: Carbon Steel/Stainless Steel Plunger No.: 3 Plunger size: 2.75”,3”,3.5”,4”,4.5” Load Weight: 1,550LB Approx. Size: 28”x12”x19”(LXWXH) We provide and manufacture high pressure triplex/ quintuplex plunger pump fluid ends for the fracturing...

Sub-surface sucker rod pump Sub-surface sucker rod pump is one of main equipment in oil production. The pumps are made through advanced surface nickel and phosphate plating, carbonitriding and carbonnitroboriding featured in corrosion resistance, wear resistance, reliability, durability, and high efficiency. In 2011,...

Trailer Concrete Pump LV-HB-20S Product Advantages: One machine with multi-purpose, it can transport mortar/fine stone concrete and spray mortar/fine stone concrete. It is small but flexible. It is mostly used for exterior wall spraying, slope protection spraying, etc. Technical Specification Maximum vertical...

Trailer Concrete Pump LV-HB-50S Product advantages: Hydraulic control equipment. One-key switch between high and low pressure, one-key return piston. Ultra-stable performance, no need for proximity switches. External junction box, wiring is more convenient. The speed is adjustable, 5-50m3 can be adjusted arbitrarily....

Trailer Concrete Pump LV-HB-45S Product advantages: Hydraulic control equipment. One-key switch between high and low pressure, one-key return piston. Ultra-stable performance, no need for proximity switches. External junction box, wiring is more convenient. The speed is adjustable, 4-45m3 can be adjusted arbitrarily....

Mud Pump Spare Parts We can offer the mud pump spare parts covers the liners, valves and seats, pistons etc to match the most types of mud pumps in the market, like Emsco, Gardner Denver, National, Oil well, Continental, Ideco, and China 3NB etc Brand Model Emsco F-350 F-500 F-650 F-800 F-1000

1. Usage and Application Range SB series Centrifugal Sand Pump mainly supplies to solids control circulating system of oilfield drill rig,and be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer,to assure these equipment work efficiently. The SB10×8×14...

SB Series Centrifugal Sand Pump 1. Application Range SB series Centrifugal Sand Pump mainly supplies to solids control circulating system of oilfield drill rig,and be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer,to assure these equipment work...

Trailer Concrete Pump LV-HB-40S Product advantages: One-piece stamping hopper, no material accumulation. Electric double lubrication, no distributor, point-to-point lubrication. Panel operation and wireless remote control dual control. Super air cooling, no water cooling required. Technical Specification

We always continually provide you with the most conscientious customer service, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Mud Pump Liners , Mud Pumps , Mud Pump , The team of our company along with the use of cutting-edge technologies delivers impeccable top quality products supremely adored and appreciated by our shoppers worldwide.

With our loaded working experience and thoughtful products and services, we"ve got been acknowledged as a reputable supplier for most international buyers for Mud Pump Liners , Mud Pumps , Mud Pump , To have much more enterprise. ompanions we"ve got updated the item list and seek for optimistic co-operation. Our web-site shows the latest and complete information and facts about our merchandise list and company. For further acknowledge our consultant service group in Bulgaria will reply to all of the inquiries and complications immediately. They"re about to make their finest effort to meet buyers need. Also we support the delivery of absolutely free samples. Business visits to our business in Bulgaria and factory are generally welcome for a win-win negotiation. Hope to expertise a happy company co-operation perform with you.