mud pump parts dubai price

We supply mud pump spare parts like mud pump liner( including zirconia ceramic liner and high chrome bi-metal liner), mono-metal Liner, fluid end module, valve and seats, piston, piston rod, pony rod etc. parts for mud pump, we can also customize and machine as your drawing.

Application:Piston assembly is one of the main parts of mud pump hydraulic system, but also the vulnerable part of drilling work. Mud pump discharge pressure is through the piston assembly by the piston reciprocating linear motion.

We supply mud pump spare parts like mud pump liner( including zirconia ceramic liner and high chrome bi-metal liner), mono-metal Liner, fluid end module, valve and seats, piston, piston rod, pony rod etc. parts for mud pump, we can also customize and machine as your drawing.

Application:Piston assembly is one of the main parts of mud pump hydraulic system, but also the vulnerable part of drilling work. Mud pump discharge pressure is through the piston assembly by the piston reciprocating linear motion.

For spares we usually have at stock, for mud pump may need 15-20 days to delivery, and other drilling rig equipment need to quote the shortest delivery time according to your need.Spares packing in wooden box.Mud pump usually packing in nude.

Fluid End Expendables for Mud Slush Pumps may appear to be a simple purchased commodity based on price. But we feel it goes much further than that. Thus we can recommend consignment programmes to reduce your ‘capital tied up in inventory’ & assist in avoiding costly last minute purchases.

Over the last thirty years we have become extremely specialized in assisting clients with High Temperature / High Pressure applications associated with complex drilling muds that regular parts will under perform or fail in.

Arabian Ocean Services (l.l.c.) Is An International Ship Chandling Organization Specializing In Refurbishment And Supplies Of Various Requirements For Oil Rigs [land And Offshore]. Our Office In Dubai

orchid energy co can provide mud pump (drilling pump) spare parts. mud pump spare parts as one of the expendables what need to be replaced frequently in drilling service, the quick matching, high quality and competitive price will be ensured from orchid energy. Our products are 100% interchangeable with the original equipment manufacturer in every way. The parts name and model will be detailed in the following sections. mud pump parts supply range: spare parts available for emsco, gardner denver, national, oilwell, ideco, fmc, opi and so on. products including: hydraulic liners, pistons, modules, valves &seats, rods & clamps, pulsation dampener, pressure gage, bearings, shafts, sealing & gaskets etc.   common expendables of mud pump models: emsco: f-500, f-800, f-1000, f1300, f1600, fb-1300, fb-1600, d-375, d-700, d-225; lanshi: 3nb-1300c, 3nb-1000, 3nb-1000c, 3nb-800; qingzhou: sl3nb-1300a, qz–1000, qz-500, qz-350, qz800, sl3nb-1600; gardner denver: pz-7, pz-8, pz-9, pz-10, pz-11; ideco: t-500, t-800, t-1000, t-1300, t-1600; national: 7-p-50, 8-p-80, 9-p-100, 10-p-130, 12-p-160, 14-p-200, 14-p-220, k-700, k-700a, k-500; oilwell: a-350pt, a-560pt, a-600pt, a-850pt, a-1100p, a-1400pt, a-1700pt; russian: 8t-650, unbt-600, unbt-950, unbt-1180l, unbt-950a, ubt-400, bt-600, ub-590, unb-600, 8t310, 8t650-01;

A part of National Oilwell Varco, the Mission line of centrifugal pumps are equipped with innovative features to match the demanding nature of routine, corrosive and abrasive applications. Because of the need for a low pressure mud system, Mission 1780 Type W centrifugal pumps were introduced in 1950s to replace duplex pumps. The aim was to apply a high quality centrifugal pump with concentric systems that allowed for abrasive fluids to be mixed and transferred thereby lowering the initial and maintenance costs of drilling. As a result, centrifugal pumps with low pressure mud systems such as Mission 1780 Type W became the industry standard.

As well depths increased, so was the need for heavier mud weights and centrifugal pumps that could withstand greater horsepower load. This led to the launch of Mission Magnum- a centrifugal pump.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Our pump engineering experts have the industry knowledge to gladly assist you with any questions, concerns, or inquiries you may have regarding the pumps & pump parts we distribute @ 800.560.7867.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

McFarland-Tritan, LLC"s positive displacement reciprocating plunger pumps are durable and reliably engineered as a hydrostatic test pump and chemical metering pump. Intrinsically safe, due to their non-electric air/gas driven design, these pumps use corrosion resistant materials for use in difficult and hazardous areas, such as offshore oil/gas platforms. McFarland-Tritan, LLC offers air operated/gas driven pumps in sizes ranging from the single head plunger pump, Mac-24, for intermediate high pressure testing and injection, to larger versions at higher pressures and dual stage pumps, Mac-14 and Mac-28 Two-Stage. See descriptions below for sizes in between.

The SPM flow control product line features products used to safely transport fluids at high pressure into the wellbore during various well service applications. Products like Pump/Fluid end dressing parts, Hammer union, Choke valves, Plug valves, Hose loop, etc.,..

A full range of interchangeable fluid end replacement parts for the Halliburton HT-400 and Axon HD-500 Triplex pump, In addition replacement parts for following Drilling equipment’s: