mud pump systems pricelist

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. Pump seat is equipped with four skeleton oil seal and shaft sleeve, prevent shaft wear, prolong the service life of the shaft.

High quality vertical mud pumps with thick, solid shaft and copper motor can be provided in ATO shop. Various models are available, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and 6 inch mud pump. Here is the price list of vertical mud pump.

Sewage mud pump is used in mining, papermaking, printing and dyeing, environmental protection, ceramics, refining, petroleum, chemical industry, farm, dyeing, brewing, food, construction, gold mine, mud, quicksand, mud pond, sewage pond, turbid fluid to send suction thick liquid, loading and suspended matter sewage operation, can also be used for mine drainage and fluid containing mud blocks.

If the mud pump and high-pressure water pump, water gun with the composition of hydraulic mechanized earthwork unit, can be used for land leveling, river and pond dredging, digging and other small water conservancy projects, as well as urban air defense engineering, underground engineering.

If you are supplying pump supplies, you can find the most favorable prices at Alibaba.com. Whether you will be working with piston type or diaphragm type systems, reciprocating or centrifugal, Alibaba.com has everything you need. You can also shop for different sizes drilling mud pump price wholesale for your metering applications. If you operate a construction site, then you could need to find some concrete pump solutions that you can find at affordable rates at Alibaba.com. Visit the platform and browse through the collection of submersible and inline pump system, among other replaceable models.

A drilling mud pump price comes in different makes and sizes, and you buy the tool depending on the application. The pump used by a filling station is not the one you use to fill up your tanks. There are high flow rate low pressure systems used to transfer fluids axially. On the other hand, you can go with radial ones dealing with a low flow rate and high-pressure fluid. The mixed flow pump variety combines radial and axial transfer mechanisms and works with medium flow and pressure fluids. Depending on what it will be pumping, you can then choose the drilling mud pump price of choice from the collection at Alibaba.com.

Alibaba.com has been an excellent wholesale supplier of drilling mud pump price for years. The supply consists of a vast number of brands to choose from, comes in different sizes, operations, and power sources. You can get a pump for residential and large commercial applications from the collection. Whether you want a water pump for your home, or run a repair and maintenance business, and need a supply of dr drill mud pump prices, you can find the product you want from the vast collection at Alibaba.com.ther it is for refrigeration, air conditioning, transfer, or a simple car wash business, anything you want, Alibaba.com has it.

The crank gear and connecting rods drive a rotary movement that is transferred by the motor transmission. The pressure is produced by the piston in the cylinder due to which the mud is sucked. Following the operation, the suction valve is closed when it moves to left. As the pressure increase in the pipeline, the valve is forced to open and mud is released.

In accordance with the operating liquid displacer type being incorporated, the pumps are subdivided into piston units and plunger-type units. The liquid discharge uniformity is independent of head. The pumping plants are used actively for the processes with the liquids containing solid inclusions in high amounts. Incorporating the self-suction function in piston unit, the liquid is sucked and discharged twice in mud pumps during the single shaft turn, making themselves the double-action pumps whereas, the mud plunger pumps are single-action pumps where the liquid is sucked and discharged only once during a shaft turn.

The single direct-action three-piston pumps prove to be better than other types of drilling. These pumps demonstrate much more uniformity in mud delivery, lesser weight, and easy mounting when compared with two-cylinder units.

Depending on the number of cylinders, the pumping plants are classified into the following categories, single-cylinder, double-cylinder, three-cylinder and multi-cylinder pumping plants. These cylinders may be vertical or horizontal. Comparatively, the multi-cylinder pumping plants will cost higher but don’t feature any significant advantages other than the single-cylinder.

When drilling, there might occur the necessity of mud pumping out- and flushing-out, so there are various types of pumps available for such operations which are required to be installed on drilling rigs.

Sucker-rod pumps: In sucker-rod pumps, the pumpjack is a driver. This pump is installed at the bottom of the well. The reciprocating movements of the pumpjack are converted into liquid flow by the pump, which results in delivery of liquid on the surface. These pumps move oil with various admixtures demonstrating high level of capacity.

Screw pumps:The screw pumps are small-sized and are generally used to deliver mud into a centrifuge. These pumps have the rotor and stator as the major structural components and the material used to manufacture these components suit right for smooth pumping of liquids with solid inclusions and high level of viscosity. The pumped liquid flows with stable pressure, shaft slowly and the flow is free of vortexes. These pumps comparatively require minimum service.

Well pumps: These pumps are submerged into wells. The ground part of the plant is a transformer substation equipped for start and adjustment. The pump has a vertical structure, with a fixed cylinder and single-action. A plunger and valve are moving parts. The pumped liquid may contain water content of up to 99% at the temperature as high as 130ºC.

All the mud pumps have few general advantages that include the capability to process liquids and substances with high level of viscosity and with admixtures. Also, enabling the smooth flow of substances, free of pulsations or suspensions mixing are counted under the major advantages of incorporating mud pumps. The pumps have high suction power and small weight, easing out the transportation and installation at remote oil fields. They are highly reliable and also affordable.

There are various types of mud pumps available for different purposes. So, it is important to incorporate the right one for your purpose. A Professional help in getting the right mud pump would be a good and safe option.

A mud pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa)) down the drill string and back up the annulus. A duplex mud pump is an important part of the equipment used for oil well drilling.

Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. Two later developments are the hex pump with six vertical pistons/plungers, and various quintuplex’s with five horizontal piston/plungers. The advantages that Duplex mud pumps have over convention triplex pumps is a lower mud noise which assists with better Measurement while drilling and Logging while drilling decoding.

Use duplex mud pumps to make sure that the circulation of the mud being drilled or the supply of liquid reaches the bottom of the well from the mud cleaning system. Despite being older technology than the triplex mud pump, the duplex mud pumps can use either electricity or diesel, and maintenance is easy due to their binocular floating seals and safety valves.

A mud pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts. Parts of a mud pump:housing itself

Duplex pumps are used to provide a secondary means of fuel transfer in the event of a failure of the primary pump. Each pump in a duplex set is sized to meet the full flow requirements of the system. Pump controllers can be set for any of the following common operating modes:Lead / Lag (Primary / Secondary): The lead (primary) pump is selected by the user and the lag (secondary pump operates when a failure of the primary pump is detected.

Alternating: Operates per Lead / Lag (Primary / Secondary) except that the operating pump and lead / lag status alternate on consecutive starts. A variation is to alternate the pumps based on the operating time (hour meter) of the lead pump.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

A well-placed suction stabilizer can also prevent pump chatter. Pump chatter occurs when energy is exchanged between the quick opening and closing of the reciprocating pump’s valves and the hammer effect from the centrifugal pump. Pump isolation with suction stabilizers is achieved when the charge pumps are isolated from reciprocating pumps and vice versa. The results are a smooth flow of pumped media devoid of agitating energies present in the pumped fluid.

This multistage system utilizes several of Sigma’s advanced products that are proven to maximize efficiencies and upgrade operations of any reciprocating pumping system by themselves.

The Charge Free Dampening System™ is categorically the most sophisticated pulsation control available for your rigs’ pumping operations. With the introduction of the CFD System, Sigma Drilling Technologies proves to be the authority on state-of-the-art advancements in pulsation control technologies.

triplex mud pumps and triplex mud pump parts meet the industry standards established by the American Petroleum Institute (API). As a global supplier of quality oilfield equipment to the oil and gas industry, we ship our products around the world.

Besides triplex mud pumps and triplex mud pump parts, we supply drilling rigs, workover rigs, top drives, drilling equipment, blowout preventers, BOP control systems, choke and kill manifolds, well service pumps for well cementing and hydraulic fracturing, wellhead equipment, casing heads, tubing heads, X-mas trees, FC type gate valves, etc. Please visit our company website

We supply unitized mud pump packages driven by DC or AC electric motors or diesel engines for electric and mechanical drilling rigs. The client can select DC or AC motors and diesel engine brands such as Caterpillar, Detroit, Cummins or others. Our unitized mud pump packages including everything on the skid and usually they are ready to work at delivery.

We manufacture a complete line of solids control equipment including; mud reclaimers & mud recyclers, shale shakers, de-silters, de-sanders, and pump packages, all for sale or for rent, allowing us to achieve a higher standard of excellence.

A large inventory of parts and accessories , and knowledgeable staff makes Mud Technology the smart choice for operators needing fast-turnaround times and competitive pricing.

Our staff is available to assist you with complete line of parts, including pump parts, shaker screens and drilling mud all available at competitive prices. As we are just a phone call away, we are available to answer questions and assist you with troubleshooting while you are in the field.

The drilling rig is built on the basis of a diesel engine. The hydraulic circuit is divided into three streams, each with its own hydraulic pump. When using multiple drives at the same time and increasing the load, the operating parameters are retained.

Pump for supplying drilling fluid to the bottom of the well. The piston is driven by a hydraulic cylinder, which is controlled by an electrically controlled hydraulic valve. The mud pump provides a pressure of 15 atm and pumps 400 l / min.

OUR COMPANYPage 1In 1986, we established Promotion of Appropriate Technology Co.ltd. to provide low cost, low technologyequipment for use in rural areas. Since then, PAT drilling rigs are working effectively in remote, ruggedareas throughout Asia and Africa.Our company utilizes its profits mainly in research, desing and development of appropriate technologyproducts.We have a ploicy of strong committment to our customers worldwide; based on field experience, ourengineering staff is constantly improving on the design and performance of our systems.PAT rigs come complete with all necessary drilling equipment, tools, spare parts and consumables.A full line of accessories is available.PAT has easy acces to international transport facilities via Bangkok.Our teams organise training sessions all over the world.Action Contre la Faim, Adventist Development and Relief Agency, Action Nord Sud, CARE, CONCERN,GRET, International Rescue Comittee, International Comittee of the Red Cross, Medecins Sans Frontieres,PRASAC, UNICEF, UNDP, UNHCR, USAID, World Concern, and many others are drilling with PAT rigsin Laos, Cambodia, Myanmar; Thailand, Kenya, Southern Sudan, Angola, Tanzania and elsewhere.In many countries, government ministeries and private companies have invested in our products.Printed Matter / Price. No.2

Page 3PAT DRILLING RIGS PROPERTIESDescription 201A 203 301A 301/2000 401 LC-PTOPhysical informationalluvial, soil, all kinds all kinds all kinds all kindsclayDrill depth 0-60 m. 0-60 m. 0-100 m. 0-120 m. 0-120 m.Borehole diameter in alluvial 3 ½” – 6 ½” 4” – 6 ½” 4” – 8” 4” – 9” 4” – 9”Drilling by Direct rotary, mudflushingBorehole diameter in hard rock No recommend 3 ½” – 4 ½” 4 ½ ” – 6” 4 ½ ” – 6” 4 ½ ” – 6”Drilling by Down The HoleHammer (DTH), air flushing.Moving system itself No Tail trailer Tail trailer Tail trailer YesRig assemblySeparate kits3 engines driveSeparate kits3-4 engines driveSeparate kits3-4 engines driveSeparate kits3-4 engines drive1 unit1 engine driveDrill system and operation Manually Hydraulic Hydraulic Hydraulic HydraulicTruck - - - - 4x4WD TruckToyota Landcruiser-without truckPrices, standard complete set(USD) to be confirmed.Mud rotary drilling onlyMud and Air drillingShipping information12,000 16,000-47,0001.1 Ton, Complete, one3 m 3 20 ft container25,50059,200Complete, one20 ft container26,90060,500Complete, one20 ft container45,50077,900Complete, one40 ft container• These prices are useful for budget estimation only.• The above information is for introduction, please contact us for more information.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 4PAT DRILLING RIGS SPECIFICATIONSDescription 201A 203 301A301/2000401 LC-PTOROTATION engine driven hyd. driven hyd. driven hyd. drivenGear box 24.16:1 3.375:1 3.875:1 4.75:1 4.75:1Torque max 20.18kg-m 102.55kg-m 185.67kg-m 227.60kg-mSpeed max 120rpm 60rpm 30rpm 0-30rpmPULL UPCapacity manual 2063.07kg 3813.09kgSpeed 12.25m/min 12.53m/minPULL DOWNCapacity manual 2063.07kg 3813.09kgSpeed 12.25m/min 12.53m/minFEEDSpeed manual 1.01m/min 1.87m/minDRILL PIPEDiameter 50mm. 60mm. 76mm. 76mm.Length 1.5m. 1.5m. 2.0m. 2.0mMUD PUMP engine driven engine driven engine driven hyd drivenPowerCapacity11hp petrol*10 hp diesel1330L/min2bar*960L/min4bar13hp petrol*10 hp diesel1330L/min2bar*960L/min4bar13hp petrol*10 hp diesel1330L/min2bar*960L/min4bar960L/min4bar960L/min4barROTARY DRILLBit size 3 ½” – 8” 4” – 8” 4” – 8” 4” – 10”AIR DRILLINGHammer - 3”-4” hammer 3”-4” hammer 4”-5” hammerButton Bit size - 90-100 mm, 90-150 mm. 90-165 mm115mmAir compressor - XA-125/175XA-146/186XA-175 *(H)XA-186,*XAH-146Pressure - 8 bar 8-*12bar 8-*12barFOAM - engine driven engine driven hyd. drivenPower - 3.8hp petrol 3.8hp petrol*4.0hp diesel *4.0hp dieselCapacity - 15L/min 15L/min 10L./minPressure - 30bar 30bar 30barHYDRAULIC SYSTEM - 1pump3pumps1circuit4circuitsrotary-pull/feedall systemWEIGHT (rig) withoutdrill accessoriesACCESSORIES1pump1circuitrotary-pull/feednew improved allsystems for the301/2000125kg 250kg 301A: 330kg301/2000: 270kgground anchorageframe support4”hand augerground anchorageframe support4”hand auger*enable to mountedon truckground anchorageframe support4”hand auger2drill pipe keydrill pipe rackrig casing clampXA-175 *(H)XA-186, *XAH-1461250kghyd. break-out4stabilizer jack4extent footing2night light2drill pipe keyrig casing clamptools box* (option)! The manufacture reserves the right to make modification without prior notice.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

PAT-Drill 201APortable Rotary Drilling Machine, improved model in 1997Page 5PAT-Drill 201A, Drilling unit basic rigA manually operated, Light weight, Portable Drilling machineenable to drill bore hole up to 60 meter depth and 6 1/2" to 8"in diameter. The compete set capable of transport by a one tonpick up truck, easy to assembly and disassembly in drill-site, canbe operated by 3 operaters.Mud pump setThe Mud pump set is mounted on a steel skid, powered by a 11 HP.gasoline engine, and mechanicallly driven by 2 V-Belts. The pump is4" centrifugal, self priming. to be mounted 2 Gate valves and Handprimer pump. The unit complete with all Hoses, 3" Suction, 1 1/2"Injection and Drain Hose.Pump Displacement : 480 gpm. at 10 m.Skid unit weight : 110 kg"s.Borehole Development Compressor setThe borehole development compressor is mounted on a steel skid,powered 11 HP. gasoline engine, and mechanically driven by 2 V-Belts.PAT offer an available flexible rubber hose system with an attacheddevelopment probe, which is mounted on a steel stand.Compressor displacement : 16.32 CFM.Skid weight : 105 kg"s.Flexible Hose Line System with Reel Stand is 1/2" x 5 metre flexible rubberhose with connections from reel stand to borehole development compress.And 1/2" x 50 metre (or 80 metre) flexible rubber hose with conncectionand attached development probe.Net weight : 60 kg"s (for 50 metre) and 86 kg"s (for 80 metre)The complete set of PAT-Drill 201A full option are comprising of- 201A- Drilling unit basic rig.- Mud pump set.- Borehole development compressor set.- Drill accessories and Tools; Drill pipes set, Drill Drag Bits,package of Hand tools.- Spare parts; estimate for 1 years operation.Printed Matter / Price. No.2The PAT-Drill 201A is the right choice for Government, United Nations, and Non-Governmental (NGO) organizationslooking for appropriate and low cost drilling equipment to provide domestic water supplies to rural villagecommunities at an economical price.

PAT-Drill 201ADrill pipes setBasic unit includes 40, 1.50 meter long, 50 mm. out side diameterfor model PAT-Drill 201A and 43 mm. for model PAT-Drill 201,high tensile drill stem, enabling drilling to a depth of 60 meters.Drill Drag Bits setTungsten Carbide Drill Drag BitsDrilling heads are available in a diameter range up to 8 inch,three wings step type. Reamers are also available. Suitable fordrilling in alluvial soil as well as rock.Drilling unitPower Mast KitThe three mast derrick is 2.90 m. high and is made from hi-quality steelpipe. Two hand winchs are mounted to enable pull-up, or pull-down.On-site set up is less than haft an hour.Top Head DriveIt is powered by a 5 hp., gasoline HONDA engine directly linked to a 24:1gearbox with a centrifugal clutch transmission providing a drill rotationspeed of 120 rpm., and 198 N-m. torque.Break-out RachetSimple reversible rachet for disconnecting drill pipes.Water Swivel (new design for PAT-Drill 201A)Proven swivel design for pumping water into rotating drill stems.The swivel unit has good quality seals and bearings that are accessibleallowing easy replacementRig AccessoriesThe accessories are complete with equipments for Rig installation andDrill operation.PATDrilling Rigs, Equipment, Supplies & AccessoriesPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 7Recommend PackagePAT-Drill 201A201A BASIC RIGPetrol2,460.00Total: USD.DieselMUD PUMPKato model, 480 gpm @ 10 m head complete with hoses set.BOREHOLE DELVELOPMENT COMPRESSORVA-80 model, 2 cylinders, 16.32 cfm-10 bar complete with 80 m. air hoses on reel stand.DRILL PIPES SET40 units of 1.5 m. drill pipe, 60 m. depth.BITS, REAMERS AND SUB ADAPTORS SET14 units of 4”-8” diameter, complete with sub adaptors to be fitted with the drill pipe thread.TOOLSAll necessary Tools for operation and maintenance. (manufacture’s recommendation)BASIC LUBRICANTSNecessary Lubricants for start-up all systems.SPARE PARTSAll service packs for Rig, Pumps and Engines. (recommend for 1 year operation)1,470.00 2,439.002,168.00 3,134.001,344.002,404.00915.00248.001,002.60 1,264.60TOTAL PRICE OF PAT-Drill 201A PETROL OPTION 12,011.60 USD.DIESEL OPTION 14,208.60 USD.Remarks- The 201 Basic is available for petrol engine only.- The petrol engine is 11 hp, 3600 rpm, manual start, air cooled.- The diesel engine is 10 hp, 3600 rpm, manual start, air cooled.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 10Recommend Package PAT-Drill 203203 BASIC RIGMUD PUMPKato model, 480 gpm @ 10 m head complete with hoses set.DRILL PIPES SET40 units of 1.5 m. drill pipe, 60 m. depth.BITS, STABILIZERS AND SUB ADAPTORS SET14 units of 4”-8” diameter, complete with sub adaptors to be fitted with the drill pipe thread.TOOLSAll necessary Tools for operation and maintenance. (manufacture’s recommendation)BASIC LUBRICANTSNecessary Lubricants for start-up all systems.SPARE PARTSAll service packs for Rig, Pumps and Engines. (recommend for 1 year operation)Total: USD.PetrolDiesel7,350.00 8,235.001,554.00 2,439.002,016.002,355.56940.00312.001,515.40 1,821.40TOTAL PRICE OF PAT-Drill 203 Mud, Rotary drilling PETROL OPTION 16,042.96 USD.DIESEL OPTION 18,118.96 USD.EQUIPMENT FOR DRILLING IN HARD ROCKFOAM PUMP WITH SERVICE PACKTriplex piston pump, 5 gpm-35 bar, complete with hoses set and service packs for engine and pump.DTH. HAMMER WITH ACCESSORIESFor 115 mm. borehole diameter complete with Hammer accessories to be fitted to the rig and air compressor.AIR COMPRESSOR WITH ACCESSORIES EQUIPPED TO PAT RIG AND SPARESPortable, two wheels trailer unit, 395 cfm-7 bar to be applied with DTH Hammer.The air hoses with all connectors and 0-1000 hours operating service packs also included the package.DTH. LUBRICANTSBasic Lubricants for start-up drilling in hard rock by DTH Hammer,comprising of 40 litre Rock drill oil and 50 litre Liquid foam.1,063.00 1,533.005,411.6024,842.87382.00TOTAL PRICE OF PAT-Drill 203 FULL PACKAGE PETROL OPTION 47,742.43 USD.DIESEL OPTION 50,288.43 USD.Remarks- The petrol engine is 13 hp, 3600 rpm, manual start, air cooled.- The diesel engine is 10 hp, 3600 rpm, manual start, air cooled.- The Button bit diameter is 115 mm only. Do not recommend for the oversize.- The total depth of drill pipe is 60 m Do not recommend for the deeper.- In case of Mud rotary drilling only, should to add Borehole development compressor set:# Petrol option is 2,250.00 USD.# Diesel option is 3,134.00 USD.- To be confirmed for the items of DTH. Hammer and Air compressor.The prices are depended on manufacture’s adjustments.Should to estimate the budget +/- 10% of the value.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 11PAT-Drill 301ADTH. Hammer and Rotary Drilling MachineThe PAT-Drill 301A is a light weight water welldrilling system designed for operations in avariety of geologic settings.Alluvial deposits, sedimentary and hard rockdrill capacity to 100 meters.The system includes separate Mast Assembly,Hydraulic System, Mud/Water Pump andCompressor for easier transport in remoteareas.The PAT-Drill 301A comes complete with allnecessary drilling equipment and supplies.Custom orders are also available.Mounting kits are available for systeminstallation in (TOYOTA) pickup trucks.A full line of spare parts, equipment, suppliesand accessories are available.PAT has easy access to international transportfacilities via Bangkok.PAT drilling rigs are currently workingeffectively in remote, rugged ares throughoutAsia and Africa.PAT Engineering Staff are constantly improvingon the design and field performance of allour system.The 301A upgrade is the direct result of thestrong committment to our customers worldwide.Printed Matter / Price. No.2The PAT-Drill 301A is the right choice for Government, United Nations, and Non-Governmental (NGO) organizationslooking for appropriate and low cost drilling equipment to provide domestic water supplies to rural villagecommunities at an economical price.

PAT-Drill 301ADrilling capacityBASIC RIGHard rock4"-6" diameter to a depth of 100 meters with Down The Hole Hammer.Alluvial deposits4"-8" diameter to required depth using fluid flush rotary.Technical specificationDRILLING UNIT BASIC RIG,MAST3 metre hight, all steel construction 320 kgs. in weight, 2.20 metre drill head travel,Break-out table to open 200 mm., equipped with 2 wheel tires., The Mast is vertical fordrilling and horizontal for travelling, enable to load on/off the truck by manual labour.CONTROL PANELOperating’s Control panel equipped with 4 main levers for control drill head travelling, androtating, feed system equipped 2 controllers, slow/rapid drill head speed and determinationof feed system and 3 pressure gauges are one unit to be mounted on the Mast.ROTATION TION HEADHydrualic motor drive via. 3.875 : 1 ratio epicycle reduction gearbox,both forward/reverserotating, Speed range : 0-70 rpm., Torque : 136 kg-m. (1320 N-m.)SWIVEL to be mounted on the rotation, a swivel spindle 40 mm. ID. with packing suitiblefor air, foam and mud flushing, safety working pressure of 20 bar.HYDRAULIC POWER PACKHydraulic system to be operated from skid mounted engine driven power pack withflexible hydraulic hoses fitted to the rig. 125 kgs in weight.- Engine : 13 HP. 3600 rpm. HONDA gasoline engine, hand starting.- Hydraulic system : VANE PUMP type, system pressure 210 bar, 40 litre Tank capacity,- Hydraulic hose line : 2 lengths, 4 metre long with quick couplings to rig.RIG ACCESSORIESSet of accessories for Rig installation and drilling operation comprising of :Rig supporters, Break-out table, Drill pipe keys, Ground anchorages,Hand auger and Drill pipes rack.BBASIC RIGDIMENSION (mm.)ABBMAST 980 X1035 3125POWER PACK 500 X700 690AAPATDrilling Rigs, Equipment, Supplies & AccessoriesPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 13Recommend Package301A BASIC RIGMUD PUMPKato model, 480 gpm @ 10 m head complete with hoses set.DRILL PIPES SET40 units of 2.0 m. drill pipe, 80 m. depth.BITS, STABILIZERS AND SUB ADAPTORS SET16 units of 4”-8” diameter, complete with sub adaptors to be fitted with the drill pipe thread.TOOLSAll necessary Tools for operation and maintenance. (manufacture’s recommendation)BASIC LUBRICANTSNecessary Lubricants for start-up all systems.SPARE PARTSAll service packs for Rig, Pumps and Engines. (recommend for 1 year operation)PAT-Drill 301ATotal: USD.PetrolDiesel14,400.00 15,285.001,554.00 2,439.003,696.002,876.161,129.00312.001,464.40 1,770.00TOTAL PRICE OF PAT-Drill 301A Mud Rotary drilling PETROL OPTION 25,431.56 USD.DIESEL OPTION 27,507.16 USD.EQUIPMENT FOR DRILLING IN HARD ROCKFOAM PUMP WITH SERVICE PACKTriplex piston pump, 5 gpm-35 bar, complete with hoses set and service packs for engine and pump.DTH. HAMMER WITH ACCESSORIESFor 115-150 mm. borehole diameter complete with Hammer accessories to be fitted to the rig and air compressor.AIR COMPRESSOR WITH ACCESSORIES EQUIPPED TO PAT RIG AND SPARESPortable, two wheels trailer unit, 395 cfm-7 bar to be applied with DTH Hammer.The air hoses with all connectors and 0-1000 hours operating service packs also included the package.DTH. LUBRICANTSBasic Lubricants for start-up drilling in hard rock by DTH Hammer,comprising of 40 litre Rock drill oil and 50 litre Liquid foam.1,063.00 1,553.007,438.4024,842.87382.00TOTAL PRICE OF PAT-Drill 301A FULL PACKAGE PETROL OPTION 59,157.83 USD.DIESEL OPTION 61,723.43 USD.Remarks- The petrol engine is 13 hp, 3600 rpm, manual start, air cooled.- The diesel engine is 10 hp, 3600 rpm, manual start, air cooled.- The drill pipe enable to add to a 100 depth. It is 88 USD per 2 m-drill pipe.- In case of Mud rotary drilling only, should to add Borehole development compressor set:# Petrol option is 2,250.00 USD.# Diesel option is 3,134.00 USD.- To be confirmed for the items of DTH. Hammer and Air compressor.The prices are depended on manufacture’s adjustments.Should to estimate the budget +/- 10% of the value.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

301 NEW MODEL FOR 2000 Page 15Recommend Package PAT-Drill 301/2000Total: USD.PetrolDiesel301/2000 BASIC RIG15,840.00 16,725.00MUD PUMPKato model, 480 gpm @ 10 m head complete with hoses set.DRILL PIPES SET40 units of 2.0 m. drill pipe, 80 m. depth.BITS, STABILIZERS AND SUB ADAPTORS SET16 units of 4”-8” diameter, complete with sub adaptors to be fitted with the drill pipe thread.TOOLSAll necessary Tools for operation and maintenance. (manufacture’s recommendation)BASIC LUBRICANTSNecessary Lubricants for start-up all systems.SPARE PARTSAll service packs for Rig, Pumps and Engines. (recommend for 1 year operation)1,554.00 2,439.003,696.002,876.161,129.00312.001,464.40 1,770.00TOTAL PRICE OF PAT-Drill 301/2000 Mud Rotary drilling PETROL OPTION 26,871.56 USD.DIESEL OPTION 28,947.16 USD.EQUIPMENT FOR DRILLING IN HARD ROCKFOAM PUMP WITH SERVICE PACKTriplex piston pump, 5 gpm-35 bar, complete with hoses set and service packs for engine and pump.DTH. HAMMER WITH ACCESSORIESFor 115-150 mm. borehole diameter complete with Hammer accessories to be fitted to the rig and air compressor.AIR COMPRESSOR WITH ACCESSORIES EQUIPPED TO PAT RIG AND SPARESPortable, two wheels trailer unit, 395 cfm-7 bar to be applied with DTH Hammer.The air hoses with all connectors and 0-1000 hours operating service packs also included the package.DTH. LUBRICANTSBasic Lubricants for start-up drilling in hard rock by DTH Hammer,comprising of 40 litre Rock drill oil and 50 litre Liquid foam.1,063.00 1,553.007,266.8024,842.87382.00TOTAL PRICE OF PAT-Drill 301/2000 FULL PACKAGE PETROL OPTION 60,426.23 USD.DIESEL OPTION 62,991.83 USD.Remarks- The petrol engine is 13 hp, 3600 rpm, manual start, air cooled.- The diesel engine is 10 hp, 3600 rpm, manual start, air cooled.- The drill pipe enable to add to a 100 depth. It is 88 USD per 2 m-drill pipe.- In case of Mud rotary drilling only, should to add Borehole development compressor set:# Petrol option is 2,250.00 USD.# Diesel option is 3,134.00 USD.- To be confirmed for the items of DTH. Hammer and Air compressor.The prices are depended on manufacture’s adjustments.Should to estimate the budget +/- 10% of the value.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 16PAT-Drill 401 LC-PTODrilling Rig mounted on Truck, Powered by Truck enginePAT-Drill 401 LC-PTO is a compact fullyhydraulic drilling rig with Top Head Drive,for down-the-hole hammer and rotarydrilling.Mounted kits designed for system stallationon pickup trucks, TOYOTA Land Cruiser4x4 WD. The systems are powered bytruck engine,PowerTake Off (PTO).PAT-Drill 401Toyota LandCruiser & 401 Basic RigPAT-Drill 401 LC PTOPrinted Matter / Price. No.2The PAT-Drill 401 is the right choice for Government, United Nations, and Non-Governmental (NGO) organizationslooking for appropriate and low cost drilling equipment to provide domestic water supplies to rural villagecommunities at an economical price.

Page 17PAT-Drill 401LC-PTO401LC-PTO BASIC RIG WITHOUT TRUCK31,500.00 USD.401BASIC RIGCHAIN TIGHTINGFLOODING LIGHTMASTROTATIONHYD. OIL TANKDRILL PIPE RACKOIL COOLINGBREAK-OUT WRENCHFOAM PUMPMUP PUMPTOOL BOXHYD. POWEROUTLET FOR MUD PUMPOIL LUBRICATOROIL LEVELHAMMER OIL ADJUSTMENTAIR INLETEXTENDING FOOTINGMAIN GATE VALVEMUD PUMP CONTROLMUD INLETSTABILIZER JACKCONTROL PANELPrinted Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

Page 18Recommend PackagePAT-Drill 401LC-PTO401 LC-PTO BASIC RIG WITHOUT TRUCKThis price already included the installation cost on the site.FOAM PUMPTriplex piston pump, 5 gpm-35 bar, driven by hydraulic motor, complete with hoses set.31,500.00Total: USD.HYDRAULIC MOBILE MUD PUMPTaki 65-33/2 model, 2 stages centrifugal pump, driven by hydraulic motor,1000 litre/min @ 30 m head complete with hoses set.DRILL PIPES SET50 units of 2.0 m Drill pipe, 100 m depth.BITS, STABILIZERS AND SUB ADAPTORS SET18 units of 4”-9” diameter, complete with sub adaptors to be fitted with the drill pipe thread.TOOLSAll necessary Tools for operation and maintenance. (manufacture’s recommendation)BASIC LUBRICANTSNecessary Lubricants for start-up all systems.SPARE PARTSAll service packs for Rig and Pumps. (recommend for 1 year operation)3,000.004,620.003,351.361,129.00324.001,520.00TOTAL PRICE OF PAT-Drill 401 LC-PTO Mud Rotary drilling45,444.36 USD.EQUIPMENT FOR DRILLING IN HARD ROCKDTH. HAMMER WITH ACCESSORIESFor 115-150 mm. borehole diameter complete with Hammer accessories to be fitted to the rig and air compressor.AIR COMPRESSOR WITH ACCESSORIES EQUIPPED TO PAT RIG AND SPARESPortable, two wheels trailer unit, 395 cfm-7 bar to be applied with DTH Hammer.The air hoses with all connectors and 0-1000 hours operating service packs also included the package.DTH. LUBRICANTSBasic Lubricants for start-up drilling in hard rock by DTH Hammer,comprising of 40 litre Rock drill oil and 50 litre Liquid foam.7,266.8024,842.87382.00TOTAL PRICE OF PAT-Drill 401 LC-PTO FULL PACKAGE77,936.03 USD.Remarks- All systems are powered from by truck diesel engine. (PTO: Power Take Off.)- To be confirmed for the items of DTH. Hammer and Air compressor.The prices are depended on manufacture’s adjustments.Should to estimate the budget +/- 10% of the value.Printed Matter / Price. No.2PATPROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD.44/5 SOI ATIT, WUTAKARD ROAD, CHOMTHONG, BANGKOK 10150 THAILANDPhone (66-2) 4761845, 4765313 FAX (66-2) 4765316 Email: pat-drill@a-net.net.thAuthorized distributor in East AfricaPAT AFRICA DRILLING LTD.P.O. BOX 39838 NAIROBI, KENYA Phone / FAX (254-2) 580146 Email: patafric@africaonline.co.ke

D2D1D3Page 19Drill Accessories for PAT-Drill 201AMUD PUMP SETBITS AND SUB ADAPTORSREAMERDRAG BITSUB ADAPTORBOREHOLE COMPRESSORCOMPRESSOR SETFIEXIBLE AIR HOSE ON REEL STANDDRILL PIPES32.5 mm.50 mm.57mm.DRILL PIPEL1.5 m.THREAD PROTECTORMALE & FEMALEHAND TOOLSPIPE WRENCH (RIDGID)PIPE WRENCH (SANDVIK)OPERATING TOOL BOXSOIL COLLECTING BOXESMALE FISHING TOOLCASING CLAMP (option )Printed Matter / Price. No.2

LLLPage 20Drill Accessories for PAT-Drill 203, 301A, 301/2000, 401MUD PUMP SETAIR COMPRESSORFOAM PUMP SETBITS AND SUB ADAPTORSREAMER-STABILIZERDRAG BITSUB ADAPTORDRILL PIPESPAT 203 D1 = 28 mm, D2 = 60 mm, D3 = 50 mm, L = 1.5 m.PAT 301A, 301/2000, 401 D1 = 40 mm, D2 = 76 mm, D3 = 60 mm, L = 2 m.D1D2D3DRILL PIPEL LTHREAD PROTECTORMALE & FEMALEDTH. HAMMERBIT SPANNERBUTTON BITDOWN-THE-HOLE HAMMERWRAP AROUNDHAND TOOLSPIPE WRENCH (RIDGID)PIPE WRENCH (SANDVIK)MALE FISHING TOOLOPERATING TOOL BOXSOIL COLLECTING BOXESCASING CLAMP ( option )Printed Matter / Price. No.2

A mud reclaimer or recycler is a solids control device designed to filter and clean drilling fluid coming back from a drill bore. The main functions of drilling fluid are to provide hydrostatic pressure to prevent formation fluids from entering and to stabilize the bore, to keep the drill bit cool and clean, to carry drill cuttings back out to the surface, and to suspend the drill cuttings while drilling is paused or during the pullback process. Drilling fluid containing excess cuttings can easily damage the pistons, liners, and valves of a mud pump, therefore it’s critical to clean the fluid down to trace amounts of solids.

Normally, a solids control system consists of a mud tank with compartments for both incoming dirty and cleaned fluid, a shale shaker, a desander (depending upon the size of the unit), and a desilter. The shale shaker separates larger solids approximately 400 micron and larger, the desander separates solids approximately 100 micron and larger, and the desilter separates solids approximately 40 micron and larger. After the fluid processes through the desilter and deposited into the clean tank, it can then be pumped to the mud pump to be pumped back downhole.

In addition to the mechanical aspect of needing clean fluid, there are also environmental concerns. Many locations now will not allow the dumping of mud just anywhere. Recycling allows for great cost savings of bentonite, a vital ingredient of drilling fluid. You can reuse your fluid for extended periods without the need for immediate disposal.

Since 1987, Tulsa rig Iron has set the industry standards on mud cleaning and pumping products. Our models are designed to be highly mobile and operator friendly. Our recyclers feature our very own LS series linear motion shakers, which are the best technology available for screening solids.