mud pump valve body in stock

The valve assembly the surface hardness is greater than HRC60, and the conical surface is ground to ensure high roughness requirements and geometric dimensions. is the key component of the hydraulic end of the mud pump.

The valve assembly consists of valve body, valve rubber, valve nut, guide frame, gland, clamp spring, steel ball, etc. (i.e. valve assembly with valve seat removed).

The valve body and the valve seat of the valve assembly are carburized and quenched with high-quality bonded steel 20 Customer-relationship Management NTI,

According to the inner hole form of the valve seat, the valve assembly can be divided into a through hole valve, a three-rib valve and a four-rib valve.

The valve assembly the surface hardness is greater than HRC60, and the conical surface is ground to ensure high roughness requirements and geometric dimensions. is the key component of the hydraulic end of the mud pump.

The valve assembly consists of valve body, valve rubber, valve nut, guide frame, gland, clamp spring, steel ball, etc. (i.e. valve assembly with valve seat removed).

The valve body and the valve seat of the valve assembly are carburized and quenched with high-quality bonded steel 20 Customer-relationship Management NTI,

According to the inner hole form of the valve seat, the valve assembly can be divided into a through hole valve, a three-rib valve and a four-rib valve.

We manufacture mud pump fluid end parts ,such as fluid end module,liner,piston,piston rod,valve body,valve seat,etc.API standard.Welcome to send any inquiry to my mail mudpumppa...

We can supply many kinds of mud pump spare parts to fit your drilling needs, suiting to almost all popular mud pumps in the world.. Such as valve, valve seats, liner, piston, fluid end parts, crankshaft Assembly, Pinionshaft assembly, valve cover, liner cage, liner nut, valve seat puller, extension rod and piston rod, bearing, cylinder etc.

4.The rubber sheet is made of polyurethane material which improves the service life of valve assembly, the operational use time is more than 300 hours.

Mud pump valve body and mud pump valve seat were produced according to API Specs as well as ISO9001 quality system by our company, were used high quality alloy steel 40CrNiMo、20CrMnTi, processed with overall forging and carburizing, the surface hardness HRC≥60; They were produced under accurate calculation and numerical control lathe, which makes dimensions of valve body and seat perfectly match each other, also were used many times by land and offshore platforms. The service life of valve body and seat are 4-5 times more than ordinary ones, which improves the working efficiency and decrease the cost and working strength.

Mud pump valve assy include valve body, valve seat, valve insert (valve rubber ). As to valve insert (valve rubber) material, we can provide Nitrile rubber (NBR) valve insert, polyurethane (PU)valve insert, compound polyurethane and HNBR.

A Mud Pump may have many changeable parts, such as liner, piston, extension rod, pulsation dampener, valve, clamp, etc. Lake Petro could provide 100% interchangeable parts of many common brands of pump. We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials. Piston assembly is the important spare parts and expendable parts of oil drilling mud pumps. Mud pump valve assy include valve body, valve seat, valve insert (valve rubber ). Pulsation Dampener is usually installed on the discharge line to reduce the fluctuation of pressure and displacement of the drilling mud pump. Fluid End Module is an important component of the hydraulic pump end of the mud pump.

Mud Pump Valve & Seat are made of premium alloy steel through one-piece forging and carburizing treatment processes, thereby ensuring high intensity. In addition, the precise calculation is performed and CNC machining is conducted for the dimensional matching of the valve seat and valve body working angles to enhance the service life of the valve body and valve seat. Our valve products are able to work smoothly in normal mining and digging conditions for over 400 hours.

Hot Selling All Kinds Of Stainless Steel Mechanical Parts Pump Valve And Seat , Find Complete Details about Hot Selling All Kinds Of Stainless Steel Mechanical Parts Pump Valve And Seat,Relief Valve For Mud Pump,Mud Pump Valve,Stainless Steel Mechanical Parts Pump Valve from Pumps Supplier or Manufa...

Referring to fig. 1, the embodiment provides a slurry pump relief valve, which includes a valve body 1, the valve body 1 has an inner cavity, a cylindrical pressure relief baffle 2 is integrally formed on the inner wall of the valve body 1, the pressure relief baffle 2 divides the inner cavity of the valve body 1 into a working cavity 3 and a pressure relief cavity 4, a slurry inlet 5 and a slurry outlet 6 are arranged on one side of the working cavity 3 of the valve body 1, and a slurry relief opening 7 is arranged on one side of the pressure relief cavity 4 of the valve body 1;

the center of pressure release baffle 2 is provided with through-hole 8, and 1 inner wall of the valve body of 4 places sides in pressure release chamber is adjacent pressure release baffle 2 is provided with first free bearing 9, pivot articulated have pressure release board 10 on the first free bearing 9, pressure release board 10 hugs closely with pressure release baffle 2, and pressure release baffle 2 is provided with the annular along through-hole 8"s periphery towards a side surface of pressure release board 10, and pressure release board 10 just corresponds the annular to the surface of annular and is provided with annular arch 11, annular arch 11 surface is glued and is covered with annular cushion 12. The one side center that pressure release board 10 deviates from pressure release baffle 2 is provided with the free bearing, rotate on the free bearing and be provided with the pivot, reset spring 13"s one end winding is on pressure release board 10"s free bearing pivot, and reset spring 13"s the other end is the same winding on the free bearing pivot of pressure release chamber 4 place side valve body 1 inner wall, and this reset spring 13 supports pressure release board 10 and supports to lean on pressure release baffle 2 with through-hole 8 inclosed the time, impress annular bulge 11 in the annular, form sealedly.

Therefore, the working principle of the pressure relief valve of the slurry pump provided by the embodiment is as follows: when slurry enters the working cavity 3 from the slurry inlet 5 and flows out from the slurry outlet 6, and when special conditions are met, the pressure in the working cavity 3 is too high, and the pressure acting on the pressure relief plate 10 is larger than the critical value of the spring, the spring is pressed, the pressure relief plate 10 rotates around the pivot on the first hinge seat 9 under the action of the pressure of the slurry, the through hole 8 on the pressure relief baffle plate 2 is opened, and the slurry flows out from the slurry outlet 7 to complete pressure relief.

In addition, the pressure release board 10 still is provided with manual valve, is convenient for at the manual pressure release under the special circumstances, manual valve includes connecting rod 14, pull rod 15 and valve handle 16, the one end of connecting rod 14 is articulated with the one end pivot that pressure release board 10 kept away from first free bearing 9, and the other end of connecting rod 14 is articulated with the one end pivot of pull rod 15, pull rod 15 from pressure release chamber 4 level extend to outside the valve body 1, and set up at the end valve handle 16, pull rod 15 and valve body 1 lateral wall sealing ring 17 sealing connection, it needs to point out that, in this application, the perpendicular distance that connecting rod 14 and pressure release board 10 articulated point to first free bearing 9 is greater than the distance that connecting rod 14 and pull rod 15 articulated mutually are got to first free bearing 9 all the time, like this when outwards pulling during pull rod 15, pull rod 15 can drive pressure release board 10 rotates through connecting rod 14, accomplishes manual pressure release.

We continue to develop the most advanced coating technologies that cover a wide range of applications. We stock four premier plungers that include: tungsten carbide, ceramic, Kerramic and Black Gold. Our tungsten carbide plunger lasts twice as long as the nickel alloy that exhausts the marketplace.Valves and Seats

Kerr Pumps manufacturers a wide variety of high quality valves and seats. We offer plenty of configurations and materials to choose from such as our more popular salt bath nitrided 17-4 stainless steel. We also keep in stock a full line of Well Service inserted valves and o-ringed seats.

Our engineers have developed piston assemblies with precision molded replaceable piston cups, molded in fabric reinforced nitrile rubber. Coupled with a 300 series stainless steel piston body, this assembly ensures optimum corrosion and abrasion resistance, regardless of liner material.

All of our pony rod glands are machined in-house on one of our many CNC lathes. The level of precision and finish in each gland gives an incredible repeatability from part to part. This consistency extends the life of each seal and pony rod which keeps you pumping longer in the field.And Many More!

We believe that making incredible pumps is just part of the game. Our main focus is taking care of our customers. That is why we stock a full line of pump replacement parts. We do our absolute best in meeting customer demands and continue to strive to be the most responsive pump company.