mudpuppy mud pump brands

Our centrifugal pumps reduce turbulence, eliminate recirculation, lower radial and thrust load, while providing a smooth flow of fluids. Our customers report Mud Puppy chrome pumps last three to four times longer the ductal cast iron pumps offered by our competitors. We feature a 118 centrifugal pump (2x3 and 4x3) and a 250 centrifugal pump option (4x3, 5x6x11, 5x6x14). Please contact us to so we can find the perfect pump for your drilling needs.

Mud Puppy is owned and operated by people with years of experience in the drilling industry, which means we understand the challenges you face in the field. We exist to save you time and money while on the job.

Our self-contained, mud-recycling units use less water than traditional methods which result in cleaner mud for further drilling. No longer will you and your crew be left to shovel sand from the mud tanks as the Mud Puppy does the work faster and more efficient than ever before.

Recycles the mud & dumps the crud! Clean mud means a clean hole. The Job Site will be Clean and Dry. Pump, Drill string, and Swivel all last. longer with clean ...

Recycles the mud & dumps the crud! Clean mud means a clean hole. The Job Site will be Clean and Dry. Pump, Drill string, and Swivel all last longer with clean ...

Specifications: 2 Axle Capacity: 7,000 lbs. Electric Brake Front Axel; Breakaway Brake System. White Spoke Wheels Tire Size 205/75/14. 2-5/16″ Ball Hitch. 2,000 lb Hand Jack. Durable Stand-On Fenders. Standard Rear Lights & Front Marker Lights. Vin # & MSO Issued. Total Weight Including MudPuppy 5,000 ...

Specifications: 14K bumper pull trailer. 8K hand jack. (2) 7K- 4” drop axles. 6” frame and tongue, adjustable height 2-5/16 Ball or pintle hitch. Electric brakes both axles. Durable Stand-On Fenders. 3 Hydraulic Leveling Jacks with 30” of travel. Standard Rear Lights & Front Marker Lights. Vin # & MSO Issued. Total Weight Including MudPuppy 8,500 ...

Specifications: 14K bumper pull trailer. 8K hand jack. (2) 7K- 4” drop axles. 6” frame and tongue, adjustable height 2-5/16 Ball or pintle hitch. Electric brakes both axles. Durable Stand-On Fenders. 3 Hydraulic Leveling Jacks with 30” of travel. Standard Rear Lights & Front Marker Lights. Vin # & MSO Issued. Total Weight Including MudPuppy 11,000 ...

The Sand Guzzler is a Patented Pick-up Pump. Self-contained centrifugal pump. Place in a small pit near the hole - when it is covered the Sand Guzzler will fill with drilling fluid & any rocks and cuttings up to 2″ diameter. No Seals or Bearings - The Sand Guzzler can run ...

Concentric housing design is available in right hand or left hand operation. It reduces turbulence within the pump to minimize cavitation, shaft deflection, and excessive wear. The semi open impeller is designed to handle water or heavy slurries with equal efficiency. Replaceable wear plates protects the pedestal from wear and corrosion caused by fluids being pump, therefore, extending the life of the pump. The beefed-up frame design is stronger and ...

Over half of the world’s population depends on ground water. The search for ground water has evolved over centuries from dug wells to a less labor intensive Mud Rotary drilling method. Mud Rotary is the most common way of searching for water in the twenty first century. Mud Rotary drilling combines water and bentonite drilling gel into slurry more commonly called MUD which is circulated down a drill rod to the bottom and out the drill bit. The ...

The goals of Environmental drilling are to investigate, monitor, and sometimes remediate a specific job site. These goals are achieved by many different types of drilling applications such as Auger, Mud Rotary, Air Rotary, and Sonic Drilling. If you are an environmental driller and your form of drilling requires a drilling fluids or mud to achieve your desired depth, then it is important that you and your company use a solids control ...

Conventional Mud Rotary is the drilling method of choice to explore for oil. This is the same type of drilling that is used for Water Well Drilling and Geothermal Drilling. Although it is the same method, the Oil Industry invented Mud Drilling first. The year was 1901 at Spindle Top Texas at the Lucas oil well. The issue with drilling on the Texas coast was that the top few hundred feet was composed all sand instead of the typical rock drilling. Next ...

Do you wish to keep your jobsite clean and save money at the same time? Then the MUDPUPPY 255 - 2SC might be the perfect choice for you. Thanks to this Mud Puppy you will significantly reduce the wear of the mud pump, drill string and other essential parts of your drill. The MUDPUPPY 255 - 2SC is the bigger brother of the MUD PUPPY 170 - 2SC and therefore has a larger patent Mud Tank. You can set up the MudPuppy in just a few minutes. No settling pit to dig and fill. You only need 3.785 litres of water. Clean mud means a clean hole. The job site will be clean and dry. With this machine you can mix only the amount of mud needed to drill the hole.

Our MudPuppy continues to sell because of its effectiveness in the field. Backed by quality and a guarantee, the MudPuppy of our partner will perform around the clock (24 hours a day, 7 days a week, not like other machines on the market) for your drilling project.

Oil Baron Supply provides a unique value to our customers by offering a one-stop shop solution for packaged systems. We work with customers to define the package, design the system, procure the materials and construct the complete package. We manage the entire process to minimize the design and project risks. Working with our suppliers to provide innovative components such as lightweight, high pressure pumps, efficient motors and auxiliary components.

Oil Baron Supply is also leader in supplying mud pump fluid-end and consumable parts trusted by drilling companies across the Asia Pacific Region. We provide a full-portfolio of parts to keep your mud system performing efficiently and reliably. We have a large warehouse of comprehensive stock where most of the interchangeable mud pump expendables and spares parts can be found which covers a wide range of brands, such as; Emsco, Bomco, Gardner Denver, Ideco, NOV, TSM, Weatherford and Wheatley.

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

AugerBoostersBucket RigCableCompressorsMiscellaneousMud Grout PumpsParts ToolingPump HoistRotaryRotary A-BRotary CRotary DRotary E-FRotary GRotary H-IRotary J-LRotary MRotary P-QRotary RRotary SRotary T-ZSeismicSoldSteelTruckWater Truck Keyword:

Mud Pump:Gardner Denver 7-1/2" X 10" Duplex; Mounted On:Unmounted; Tools/Options:Gardner Denver FXD (FY-FXD) Hydraulically Driven. Includes New Rods, Pistons and Cylinders.

Mud Pump:Gardner Denver 5X6; Mounted On:Unmounted; Tools/Options:Gardner Denver 5X6: Recently Removed from Drill, Worked Good. Rebuilt Fluid End in the Spring of 2022, Gear End is in Good Condition. Has the Hydraulic Motor and Gear Reduction.

2009 ??, Mud Puppy; Model:170 2SC; Mounted On:Trailer; Tools/Options:Mud Puppy 170 2SC: Owner Believes it is a 2009? Brand New Turbo on the Engine, New Style Hydraulic Parker Pump and New Style Shaker. 3-Cone Manifold, Newer 118 Pump. Hour Meter does not Work.

2004, Mud Puppy; Model:BF6M; Mud Pump:Duplex 3X4X13 Mission Magnum Centrifugal; Engine:205 HP Deutz 7-Liter Water Cooled; Mounted On:Custom 3-Axle SPCNS Trailer; Condition:Excellent OPEN TO OFFERS; Tools/Options:Mud Puppy BF6M Year: 2004: Well Maintained, Mud Pump System, 1,000 Gallon Stainless Steel Dual Tanks, Water Cooled 7-Liter Diesel Engine, Dual Screen Shaker, 6-Cone De-sander, Duplex 3X4X13 Mission Magnum Centrifugal Mud Pumps (down the hole pump & desander), Mud Mixer, 2-Sand Guzzler Pickup Pumps, all Hydraulic. Mounted on a Custom 3-Axle SPCNS Trailer with Pintle Tow Hitch. Surge Hydraulic Brakes, 3 Leveling Jacks. Unit is Ready to Work.

Mud Pump:Gardner Denver 5-1/2" X 10"; Engine:CAT 3208; Mounted On:5th Wheel Single Axle Trailer; Tools/Options:Gardner Denver 5-1/2"X10" : Mud Pump can be Cut off of the 5th Wheel Single Axle Trailer.

Mud Pump:GASO 1742 5X10; Engine:Detroit 471; Mounted On:Skid; Condition:Last Ran approx. 2 Years Ago - Started Occasionally; Tools/Options:Gaso 1742 5X10: 5-1/2" Liners, Pump has New Cross Heads, Gear has been Turned Over. Ran Great when Parked approx. 2 Years Ago. Started Occasionally.

Mud Pump:Gardner Denver 5X10 Air Powered, Duplex; Mounted On:Trailer; Tools/Options:GD 5 X 10: Air Powered, Duplex with Ridged Pipe, Hosing and other Accessories. Trailer has Air over Hydraulic Brakes. Will Sell Separately.

Edge; Model:550; Engine:24 HP Honda; Mounted On:Skid; Condition:Working Unit; Tools/Options:Edge 550 Mud System. 500 Gallon Mud Tank. Double Screen Shaker, 4" X 3" Bottom Screen, 3" X 3" Desanding Screen, Dual Cones, 2X3 Centrifugal Mixing Pump.

Mud Pump:Myers D65-20; Engine:V8 Gas; Mounted On:Trailer; Tires:New; Tools/Options:Myers D65-20 High Pressure Triplex Mud Pump: Belt Driven Pump, Trailer and Pump are in Good Condition but it will need a New Engine.

Mud Pump:Gardner Denver FXZ; Engine:8V71; Mounted On:Skid; Tools/Options:GD FXZ: Air Clutch. Owner Believes it is a 7-1/2" X 12" or 7-1/2" X 14". Misc. Bits for Hammers also Available.

Mud Pump:Emsco Continental F 800 Triplex; Mounted On:Covered Skid with Walkway; Truck Engine Make:Cummins; Tools/Options:Emsco F800 Triplex Mud Pump: Last Used on a 2,000" Well in 2020. Pump was Rebuilt at that Time.

Mud Pump:Gardner Denver & Wheatley; Condition:Working Order; Tools/Options:Three Mud Pumps, Gardner Denver 5X6, Wheatley 5X6 and a Wheatley 5X10. Will Sell as a Package or Separately. All in Working Condition.

Mud Pump:Great American 500 7" X 14"; Engine:CAT 350 3D 600 HP; Mounted On:Skid; Tools/Options:Pistons & Valves, approx. 1,500 Hours on New Build. Trailer Available for an Extra Cost.

Mud Pump:Gardner Denver 6X10; Tools/Options:Gardner Denver 6X10: Came off of a Speedstar SS-22, was Hydraulically Driven or Air Driven, Manual Clutch or Air Clutch. Expendables and Gear End are about 50%. Comes Complete, No Power Unit.

2007, Gardner Denver; Model:PZ 7 See Note Below; Engine:CAT C13 400 HP; Mounted On:Skid; Tools/Options:Gardner Denver PZ 7 Year: 2007: Skid Mounted PZ7 Mud Pump (more than one available). PZ 9 Pumps also Available.

Mud Pump:Gardner Denver FXZ 7" X 12"; Engine:2007 Volvo; Tools/Options:GD FXZ 7" X 12" Mud Pump: Powered by a 2007 Volvo Engine. Has a Wichtex True Air Clutch.

2009, Mud Pump:Gardner Denver PZ9; Engine:CAT Diesel; Mounted On:Housed & Skids; Tools/Options:Housed and Skid Mounted. (34" Long X 11"9" Wide X 10"9" High). CAT Engine has an Air Start Motor, Air Compressor Installed in Unit so it may be ran Independently. New Clutch, Pulsation Dampener. Interior & Exterior LED Lights, Electric Heater.

2016, Mud Puppy; Model:MP-2552SC; Engine:Deutz Diesel; Mounted On:Trailer; Condition:TEMPORARILY OFF MARKET; Tools/Options:2016 Mud Puppy MP-255-2SC: Approx. 1,279 Hours and a 1,000 Gallon Reservoir Tank. Has a 4X3 Miixing Pump on Board and a 12" Centrifugal Mud Guzzler. All Seals Recently Replaced.

Mud King; Model:PAH RMKP; Mud Pump:5X4 Mission Centrifugal; Engine:60 Series Detroit 475 HP; Mounted On:Skid; Tools/Options:Mud King PAH RMKP 275 Mud Pump: 5" Swab with 8" Stroke, 5,000 psi. 1,655 Engine Hours. Murphey Power View, New Single Stage Air Compressor, Radiator Rebuilt in 2018, Allison 750 Automatic Transmission with Bennett Shifter, Transmission Cooler, EVCO Hydraulic Pump, Chelsea PTO, Hydraulic Cooler. Mission 5X4 Centrifugal Pump with Brank Hydraulics, 1-1/4" Control Valve with Nachi Relief Valve, External Roper Secondary Oiler Pump for PAH with 3/4" Control Valve. Oteco Pressure Relief Valve, 6,000# MF Type D Pressure Gauge on Swivel, 1" Belt Driven Centrifugal Splash Pump, 2" NuFlo Meter, Hard Line Rack, Piper 5 Valve Manifold with Chiksan Swivels and 602 Hammer Unions, 8" I-Beam, 97" Wide, 25" Long Skid, Built by EVCO in 2013 has had Limited use. CIRCULATING TANK: 8" I Beam Skid 20" Long, 94" Wide, Tank 16" Long, 5" Tall, 84" Wide, V-Bottom, with 2 Compartments with Solids Catch Tub, 2 Walkways with Handrails, Hose Racks, 3" Figure 100 Hammer Unions. Built by EVCO in 2013.

Mud Pump:Acker APS16TR-45 High Capacity Water Pump; Engine:Hatz Diesel; Mounted On:Skid; Tools/Options:Acker APS16TR-45 High Pressure Water Pump, Complete New Factory Reman. FMC Pump with a Capacity of 45 GPM @ 1,000 psi. Diesel Engine with 12 Volt Electric Start and Equipped with Flange Mounted 5-Speed Transmission (4 Forward and 1 Reverse) and Clutch & Driving Thru a Gear Reducer to the Pump Shaft. Was used for about 2 Weeks for One Job and has been Inside Since. Has approx. 75 Hours on it.

Mud Pump:Mission 5X6; Engine:Brand New John Deere; Mounted On:Skids; Tools/Options:Air Driven, Brand New John Deere Engine and New Expendables, Shaft, Bearings.

Mud Pump:Wheland 7.5" X 10"; Engine:Cummins 170 HP; Mounted On:Skid with a Winch; Tools/Options: Wheland 7.5" X 10": Owner is not sure if intake is 10" or 12". Has been sitting a while and will need new Expendables. V-Belts..

Mud Pump:Gardner Denver 5X6, 4.5X6; Tools/Options: Three Gardner Denver Mud Pumps, (1) 5 X 6 and (2) 4.5 X 6. One is in decent shape, one needs rebuilt, on is basically just a good core. Includes enough new parts still in boxes to rebuild the fluid end for a 5X6. Rods, swabs, liners, seats, valves for at least one complete set.

Mud Pump:Gaso 5X10 Series 1500; Mounted On:Frame; Tools/Options:Gaso Tulsa 5X10: Series 1500 Mud Pump. Needs New Gears, Pump has been Rebuilt. Engine has been Removed

Mud Mizzer; Model:150; Compressor:N/A; Mud Pump:(3) Centrifugal; Engine:Diesel; Mounted On:Frame; Tools/Options:Mud Mizzer 150: 4-Step Cleaning System, Clean Fluid Rate of 150 GPM, 1,100 Gallon Capacity Working Tank, Tri Screen shale Shaker (skewed elliptical motion). Quick Clean Mud Mixing Nozzle, No Tools Required, Cleans in 30 Seconds. Mixing Hopper & Wand, Fuel Tank, Hand Rails, Work Platforms, (3) Centrifugal Pumps - One Pre-Charge, (2) Processing. (3) Desanding cones, (3) Desilting Cones. No Electric Motors or Generators Required. Mini Vac Suction System Moves Mud From Pit to Shaker, Clean Fluid, Pressure Discharge 3" Female Pipe Threads (hose not included). Roll Jets for Tank Cleanout.

Mud Pump:GD FXG 5X6; Mounted On:Unmounted; Tools/Options:GD FXG 5X6: Old Style. All parts in fluid end replaced except liner cages. Has dampener & relief Valve. Gear end approx. 85-87% . No belt pulleys.

Mud Pump:GD 5X6; Mounted On:Trailer; Tools/Options:Air Driven, includes all hoses, dampener, and mud mixer (pipe fitting). Sat for a few years, condition not know. May need Valve Caps and Air End may need some work.

Mud Pump:GD 5X6; Mounted On:Unmounted; Tools/Options:Air Driven 5X6 GD Mud Pump. Air end condition unknown, may need rebuilt, Fluid end needs rebuilt.

We manufacture a complete line of solids control equipment including; mud reclaimers & mud recyclers, shale shakers, de-silters, de-sanders, and pump packages, all for sale or for rent, allowing us to achieve a higher standard of excellence.

A large inventory of parts and accessories , and knowledgeable staff makes Mud Technology the smart choice for operators needing fast-turnaround times and competitive pricing.

Our staff is available to assist you with complete line of parts, including pump parts, shaker screens and drilling mud all available at competitive prices. As we are just a phone call away, we are available to answer questions and assist you with troubleshooting while you are in the field.