national jws-400 triplex mud pump free sample

A wide variety of national oilwell mud pumps options are available to you, You can also choose from new, national oilwell mud pumps,As well as from energy & mining, construction works , and machinery repair shops. and whether national oilwell mud pumps is 1.5 years, 6 months, or 3 months.

REFERENCE REFERENCE DESCRIPTION 1292000 Top Level Assembly This document contains proprietary and confidential information National Oilwell Varco which belongs to National Oilwell; it is loaned for limited purposes 1530 W. Sam Houston Parkway N. only and remains the property of National Oilwell. Reproduction, in Houston, Texas 77043 whole or in part; or use of this design or distribution of this information to others is not permitted without the express written consent of National Oilwell. This document is to be returned to Phone: (713) 935-8000 National Oilwell upon request and in any event upon completion of Fax : (713) 935-8269 the use for which it was loaned.  National Oilwell DOCUMENT NUMBER REV

PAGE DRAWING NO. REV. DRAWING DESCRIPTION 1 PL 1292332 C FLUID END ASSEMBLY (STANDARD) 2 PL 1292613 -- FLUID END ASSEMBLY WITH PREMIUM MODULES 3 PL 1292737 -- FLUID END ASSEMBLY WITH H.P. MODULES 4 PL 1292000 U FLUID END ASSEMBLY (SHEET 1 OF 3) WITH TAPR-LOK VALVE COVERS 5 PL 1292000 U FLUID END ASSEMBLY (SHEET 2 OF 3) TOP VIEW OF ROD CHAMBERS 6 PL 1292000 U FLUID END ASSEMBLY (SHEET 3 OF 3) SECTION THRU ROD CHAMBERS 7 PL 1292120 D LINER SPRAY SYSTEM 8 PL 1292001 X POWER END ASSEMBLY (SHEET 1 OF 3) SECTION THRU POWER END 9 PL 1292001 X POWER END ASSEMBLY (SHEET 2 OF 3) SECTION THRU CRANKSHAFT 10 PL 1292001 X POWER END ASSEMBLY (SHEET 3 OF 3) SECTION THRU PINION AND CROSSHEADS 11 -- -- SUCTION STABILIZER ASSEMBLIES (OPTIONAL) 12 PL 1292312 G DAMPENER MANIFOLD, DOUBLE SIDE INLET (OPTIONAL) 13 -- -- DAMPENER MANIFOLD ASSEMBLIES (OPTIONAL) 14 -- -- LINER FLUSHING SYSTEM (OPTIONAL) 15 PL 1292316 -- LINER FLUSHING SYSTEM, RIGHT ANGLE DRIVE (OPTIONAL) 16 PL 1291157 B LINER FLUSHING PUMP, RIGHT ANGLE DRIVE (OPTIONAL) 17 -- -- STRAINER CROSS ASSEMBLIES (OPTIONAL) 18 -- -- TOOL AND ACCESSORIES 19 PL 1292004 E OUTLINE DRAWING

Rig pump output, normally in volume per stroke, of mud pumps on the rig is  one of important figures that we really need to know because we will use pump out put figures to calculate many parameters such as bottom up strokes,  wash out depth, tracking drilling fluid, etc. In this post, you will learn how to calculate pump out put for triplex pump and duplex pump in bothOilfield and Metric Unit.

from China and specialize in manufacturing and supplying high pressure mud pump complete and accessories for oil, gas and water well drilling sites. With more than ten years export experience, we own independent import and export right, and approved by API-7K, ISO 2000 standard,and also occupy a majority of usage in the worldwide oil-producing countries and absolutely approved by abroad drilling contractors.

such as Valves & Seat (Webs & Full open), Duplex & Triplex Piston, Piston Rod & Clamp, Extension Rod, Discharge & Suction Module, Fluid End Studs & Nuts, Valve Cover, Wear Plate, Upper and Lower Valve Guide, Left Hand/Right Hand Crosshead, Oil Pressure Gauge, Pinion Shaft, Crankshaft, Connecting Rod, Bearing, Bearing Housing & Retainer, Rubber Products, etc.For various popular brands as follow:

Mud System Solids Control Equipment: Shale Shakers, Shale Shaker Screens, Mud Cleaners, Sand Pumps, Mud Hoppers, Mud Agitators, and their replaced parts;

(3) National 400 JWS Triplex mud pumpw (4-1/2 and 5-1/2" Liners), p/b Detroit Series 60 diesel engine, 600 bbl capacity mud tanks with guns, agitators, hopper, Brandt King Cobra linear motion shale shaker, (2) 6x8 centrifugal mixing pumps p/b (2) 60 hp electric motors, 70 bbl mixing tank, 5000# 2" choke manifolds with 2 adjustable chokes

(2) Continental Emsco FB1600 triplex mud pumps rated at 1,600 HP (2000 input HP) Fully enclosed steel power end. New National Oilwell fluid ends FB 1600 5000 PSI.

Tanks: 8 ballast tank 13,399 bbls, potable water 1,150 bbls, fuel oil 1,525 bbls, pollution tank 96bbl, liquid mud 1,553 bbl, process tank 130 bbl, bulk tanks 1,300 cu.ft. drill water 4,892 bbl.

Gardner Denver PAH triplex pump (4-1/2 “ liners), p/b GM 8V71 diesel engine, 180 bbl mud tank, 180 bbl holding tank, centrifugal pump p/b Detrot 471 diesel engine with hopper (skidded)

GARDNER DENVER 1500E JACKUP RIG(REF#1288M) 1500 HP rig, manufactured 1978, drilling depth 15,000, National Oilwell Varco 350/500 top drive, model JU-45-MS (upgraded), Gardner Denver 1500E drawworks, 80" water depth capacity, 142" x 30" x 3" Lee C Moore Cantiliever mast 1,300,000#, (2) Gardner Denver PZ-10 Triplex mud pump powered by (2) EMD D-79 MB DC traction motors, 37.5" Oilwell rotary table, two speed transmission, powered by one EMD D-79 MB DC traction motor. Currently stacked in Louisiana. PRICE: $4,500,000

LIFTBOAT JACK UP VESSEL(Ref#1127M) Manufactured 1983, 79"L x 59"W x 8"H, open space 2800 sq ft, 192 GT, 150 NT, main deck carg o 105 (kips). (4) 148" x 42" legs (5/8" wall thickness braced), 22"L x 12"W x 24" depth pads (raked all sides), 70 ton crane with 80" boom, 10 ton aux crane with 50" boom. Main engines: (2) 12V71N GM (680SHP), 3:1:1 reduction gear (twin disc ratio), 8 knots. (2) Deep Well Pumps, (2) electric 400a welding machines, satelilite phone with internet, (2) 80kw Delco generators w/(2) 6V71N GM engines, 7500 gal fuel, 9800 gal potable water, navigation equipment, 28 berths (including boat crew), central A/C and heaters, Lounge w/Satellite TV, 4 heads, galley seats 16, laundry. Maximum working depth 90" (w/25" air gap), Max sea conditions: 4" hard, 5" soft bottom, 8-10 fpm speed. Working in USA Price: $5,700,000

JACK UP DRILLING/CORING RIG(Ref#9587)  operates in 80" of water, composed of (6) 10" x 40" x 7"H FlexiFloats and (4) 10" x 20" x 7" H Flexifloats, (4) spuds, (4) 80" legs 3" dia x 40" long.  Currently on the platform is a Gardner Denver mud rig used for drilling and core samples.  Another type of rig such as a Mobile, Acker or CME could be placed on jack up.  Currently working.  Offered on rental basis:   $40,000 per month.   Will sellfor $1,100,000

We, Qingdao Hongbo Petroleum Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developingmud pump fluid end expendables for customers worldwide. HB’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, HB’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, andhave been accepted domestically and internationally.

As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensurethe best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. HB’s products have equivalent quality with those of OEM and are produced for direct replacement for brand mud pumps including but not limited to EMSCO, Gardner-Denver, National, Oilwell, IDECO, Skytop Brewster, OPI, Wirth and Wilson. With a large range of specifications, HB’s high quality products have been successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Bimetal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3-web or 4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and

This is Isacc of China Qingdao HNA Oilfield Machinery Co., Ltd. We are a large drilling tools, mud pump and Fluid End Expendables and mud pump spare parts manufacturer in China.

Our plants are specialized in producing wide range of replacement parts and liners, Pistons, Valve and seats for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, Oillwell, OPI Skytop, etc. and other brand liners. All items are manufactured to API 7K quality standards.etc.

And we make cranskshaft, pinion shaft, crosshead assy for EMSCO F series mud pumps, GARDNER DENVER PZ-9, NATIONAL OILWELL 9-P-100, 10-P130 and 12-P-160 mud pumps.

Our F1000 mud pumps have good market in Canada, Mexico, Thailand and Middle East. And our mud pumps have approved by mud pump and insurance industry in Canada.

We specialize in triplex mud pumps and triplex mud pump parts and accessories. If need a quality triplex mud pump or accessory at competitive prices, contact us.

Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.

Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.

We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

Our company is one of the leading designers and manufacturers of triplex mud pumps and fluid end expendables of oilfield drilling machinery, offering top quality and competitive products for our clients all over the world. We adopt ISO9001 quality system and our products meet the API standard.

We have been engaged in manufacturing series of quality mud pumps and spare parts for oilfield machinery since early 1990s. The main products are sold to USA, Mid-Asia, Canada, Mexico, Middle East and Russia. The mud pumps are used in oil drilling and mining. We can supply series of mud pumps( like f-500, f-800, f-1000, f-1300, f-1600 and PZ series )and a full line of fluid end expendables for popular mud pumps in the world, including continental Emsco, National, Gardener Denver,Oilwell,Ideco,Wheatly,Wilson,Wirth,OPI,EllisWillianms,Skytop/Brewster, etc.

We currently manufacture over 2000 major products such as valves & seats, modules, gaskets, plates, crosshead and crosshead guide, hydraulic seat puller, snap rings & valve rings, hy-chrome liners, chrome-plated liners, hardened steel liner, piston hubs, piston & piston rubbers, piston rods and extension rods, cylinder heads & valve covers, drilling tools and other expendables. In fact, as a leading oilfield machinery company, we have revolutionized the triplex premium chromium liners and our patent hp liners have dominated the market with Chinese patent no.: zl03269409.1 since late 1990s. We guarantee that our parts are completely interchangeable with those offered by OEMs with no modification of existing equipment. The warranty extended by Hainuoao(HNA) meets or exceeds the warranties offered by the OEMs.

We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

We,Dezhou Jiatong Machinery Co., Ltd have been engaged in manufacturing and dealing in mud pump and related fittings in oil drilling fields ---------High frequency quenching liners and modules and so on. Most of our products are exported, and we have the power of self-supporting import and export.Our company’ s products design is fit for worldwide brand mud pumps, such as: Emsco, Gardner-Denver, National, Oilwell, Ideco, Skytop／Brewster, OPI, Wirth, Wilson, Gaso and so on. Our company owns lots of large-scale advanced equipment. Both Liners’ quenching technique and heat treatment technique are in the leading place in China. Every year we produce and sell about 10000 liners of various kinds in different sizes . Products meet the criteria and rule of API totally. Part of our products are produced directly for mud pump producers who are famous worldwide. The product is widely approved by the user communities in American, Canadian, Mexican, the Middle East, the Australian market for its fine quality and the best service。Our company mainly produces and sells the following products:

Also, we produce custom-made valves, seats, liners and other mud pump parts. Customs can choose needed products by yourselves, and we can help you choose suitable products if you provide us with mud pump models and practical drilling conditions in detail. We have specialists of our products serve for the customer track. What’ more, we may defer to the blueprint or the sample customers provide and carry on processing. Jiatong’ s staff whole-heartedly welcome customers everywhere to exchange cooperation with us.

Zibo Huachuang Fine Ceramics Co., Ltd.- is a new & hi-tech ceramic enterprise that specializes in manufacturing of ceramic sleeves and pistons of mud/oil pump with the excellent performances, such as wearing-resistance, erosion-resistance, high-temperature-resistance, high-strength, high-hardness in the working conditions on which metal and polymer ones can not do. They are widely used in MUD PUMP in the fields of petroleum, such as NATIONAL, OILWELL, IDECO, EMSCO, GARDNER-DENVER,FMC etc.

HNA is specialized in producing mud pumps and wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners. All items are manufactured to API 7K quality standards.

Our Products are designed to fit mud pumps of Emsco, Gardner- Denver, National, Oilwell, Ideco, Skytop/Brewester, as well as OPI, Wirth, Wilson and Gaso. Our products include Liners: Hy- chrome Mud Pump Liner, chrome-plated Liner, Hardened Steel Liner Valve and seat: Premium Cross Arms Valve and seat, Full open Valve and seat, Valve Spring Piston and piston rods; Long-life Bonded Piston with Rubber and Fabric, Long-Life bonded Piston with Urethane, Replacement Piston, Piston Hub, Piston Rod, Plate, Snap Ring Other parts: Crosshead, Upper and Lower Crosshead Guide, Extension Rod, Piston Rod Clamp, Threaded Ring, Linder End Cover, Valve Pot Cover, Valve Guide, Cylinder Head, Cylinder Head Plug, Cap, Linder Seal, Valve Cover Gasket, Cylinder Head Gasket and etc. Mud pumps: We can offer the F-650,F-800,F-1000,F-1300,F-1600 and PZ-9 mud pump.

We"re Dezhou Rundong Petroleum Machinery Co., Ltd., specializing in mud pump, fluid end. Our products mainly include valve seat and body, valve assembly, liners, piston, piston rod and other mud pump parts.

2 COMPANY TSC MANUFACTURING and SUPPLY, LLC is a leading worldwide manufacturer and distributor of fluid end expendables and mud pump spare parts for existing equipment, and new mud pumps of TSC design. These highly specialized parts are used throughout the oil well drilling, workover, water well drilling and mining industry. Headquartered in the USA, Houston, Texas, coupled with extensive worldwide global locations, TSC is able to provide high quality products with expedenant deliveries to our valued customers. TSC s modern manufacturing facilities feature strict quality control processes which guarantee our products are produced to the highest industry standards, which include certification to ISO 9001 and API ISO/TS standards, and authorization to mark our equipment with API monogram. Additionally, our extensive experience in research and development abilities and activities enables us to effectively manufacture existing products to even higher standards, which ensures that the products you receive consistently exceed OEM specifications, not just meet them. When you require fluid end expendables or mud pump replacement parts, TSC s goal is to exceed our customers" expectations 24/7/365 with our superior customer service and the highest quality products at competitive prices. You won t regret allowing us to service your organization. Remember TSC is your Total Solution Company 1

4 TABLE OF CONTENTS INTUCTION High Chrome Sleeve Liner...9 Chrome-Plated Liner...9 Zirconia Liner...10 S Urethane Piston...11 N"durall Premium Bonded Piston...12 Rubber Piston...13 S, EXTENSION S & CLAMPS Piston Rods...14 Extension Rods...14 VALVES AND SEATS Full Open Valve And Seat Web Design and 4 Web Design Valve and Seat...15 FLUID END MODULES...16 FLUID END ACCESSORIES...17 & ELASTOMER PUCTS...18 PULSATION DAMPENERS...19 MUD PUMP EXPENDABLE S TSC WFU WF WFU WWS WF

6 TABLE OF CONTENTS PZ PZ PZ PZ-11HP...56 PXL...57 IDECO T T T T T NATIONAL JWS JWS JWS P P P P P P-160 Fast Change P-160 (7500 PSI) P OILWELL A-350-PT...74 A-560-PT...75 A-600-PT

9 TABLE OF CONTENTS IDECO T-500, T-800, T T-1300, T NATIONAL 8-P P P P-160 (7500 PSI) P-160 (FAST CHANGE) P-160 (7500 PSI) P OILWELL A-850-PT, A-1100-PT, A-1400-PT, A-1700-PT BOMCO F F-800, F F-1300, F LANSHI 3NB1000C NB1300C NB HONGHUA HHF-1300, HHF SOUTHWEST SOUTHWEST NEW STYLE MODULE for 12-P SOUTHWEST for FB-1300, FB SOUTHWEST for A-1400-PT, A-1700-PT

10 INTUCTION When it comes to mud pump fluid end expendable parts, TSC Manufacturing and Supply, LLC. has it all. TSC mud pump liners are designed and manufactured to meet or exceed original equipment specification and API standards for almost all types of mud pumps in use today. With advanced technology, metallurgical control and rigid inspection, we offer unmatched performance and durability according to customer testimonies in the most severe drilling conditions, both triplex and duplex liners are available in a wide range of sizes. HIGH CHROME SLEEVE LINER The outer hull, or body, of the liner is manufactured using high-strength forging. TSC uses forgings exclusively to ensure consistent quality. The sleeve is centrifugally cast in the TSC facilities by skilled craftsmen. It has the maximum amount of chrome for the base metal and TSC adds molybdenum to increase the hardness depth. The sleeve is then inserted into the hull at a tightness at exceeds its counterparts. The TSC liner is rated to match the pressure rating of the pump per liner size. TSC mud pump liners are unsurpassed in quality and reliability. Features Rated for all drilling operations. Bore hardness is Rockwell. "HP" lip design to prevent inner sleeve slippage. Extremely long service life. CHROME-PLATED LINER TSC chrome-plates the same outer hull in lieu of the sleeve to maximum thickness. The hulls are then machined and polished to a mirror finish. 9

11 INTUCTION ZIRCONIA CERAMIC LINER TSC s zirconia liners offer lifetime cost savings, significantly longer service, better performance and safer operation than those made of more commonly used alumina ceramic. In addtion, TSC s zirconia liner is a proprietary Zirconium-based matrix that has significantly improved mechanical characteristics. Zirconia has three important property advantages compared to alumina. Zirconia exhibits better impact strength. Zirconia is harder than alumina. Zirconia can be honed to finer surface finishes than alumina. Finished to 4 RMS, the zirconia liners provide a surface finish that is three to four times finer than alumina. All three of these property advantages translate to lower ownership costs. The improved wear directly extends the service life of the sleeve, while the improved impact strength reduces significantly the costs of replacing broken liners in the field. The surface finish improvements, meanwhile, have an indirect effect. The finer surface finish means less friction with the elastomer-and-metal pump pistons, which in turn extends piston life and reduces pump-cooling requirements. Reduced liner and piston wear. Increased impact characteristics. Lower thermal load on the liner wash system. Higher thermal ratings. HP design with shoulder-on-hull to prevent sleeve slippage. ID tolerances of +.010"/-.000". Surface finish of 4-8 RMS. Hardness is HV 0.3 kg/mm 1100/1200 ( Rc). Improved performance for high temperature applications. Liner sizes are available from 4"-8" for all popular mud pumps. 10

12 INTUCTION S TSC offers a full range of mud pump pistons for both triplex and duplex pumps. They are: Bonded urethane pistons. Bonded rubber pistons. Replaceable rubber pistons. Endurance Premium Bonded Piston. URETHANE These pistons are constructed of double durometer urethane, bonded to a solid metal hub. Double durometer urethane is designed to provide optimum performance in oil-based mud and high drilling pressures. Features Rated for all drilling operations. Maximum operating temperature is 180 F. High pressure mud pump service. Extended service life. 11

13 INTUCTION N"DURALL PREMIUM TSC s "N"durall" mud pump piston improves drilling contractor economics through advances in technology, improved process control and increased drilling penetration rates. Chemistry Manufactured from advanced polymer compounds, the advances in chemistry ultimately provide superior mechanical values and chemical resistance. The increased mechanical values provide resistance to reciprocating pump psitons biggest enemies listed below. Heat. Abrasion. Extrusion. The advanced polymer compound provides strength to withstand chemical attack from additives used in today"s oil, synthetic and water based drilling fluids. The compound also has improves abrasion resistance from drilling solids suspended in drilling muds and excels in high temperature performance capable of operating in fluid temperature up to 300 F. Improved Process Control The "N"durall" carries stamped batch numbers on the piston body for use in monitoring manufacturing dates and as an aid in rotating shelf stock. Design The single durometer design and open mold casting contribute to overall performance and improved economics. Machining CNC machining of steel piston heads yields close tolerances for improved performance. Applications High Pressure Drilling. Elevated Mud Temperature. Synthetic Drilling Fluid. Ceramic and Zirconia Liners. Chrome Sleeved Liners. 12

14 INTUCTION TSC pistons are constructed of nitrile rubber bonded to a solid metal hub. The oil resistant rubber is designed to provide optimum performance in oil base or water base mud and high drilling pressures. Features High tensile strength. Rated for all drilling operations. Maximum operating temperature is 250 F. Extended service life. REPLACEABLE TSC replaceable rubber pistons are made with nitrile rubber to resist extrusion and abrasion. These pistons are fully interchangeable with most other manufactures products. Available sizes range from 3 through 7-1/2 and series are A, B, K and L. Features High tensile strength. Rated for all drilling operations. Maximum operating temperature is 250 F. Extended service life. 13

15 INTUCTION S TSC piston rods are made with premium-grade, heat-treated alloy steel. The rods offer excellent resistance to fatigue, corrosion and heavy loads. A full line of piston rods are available for various pumps. Features Fabricated with quality alloy steel. Numerically controlled machining. Long-lasting service life. Clamped and threaded. EXTENSION S TSC extension rods are made from high-strength alloy steel, either heat treated or chrome plated. The rod offers excellent resistance to fatigue, corrosion and heavy loads. They are machined and polished to ensure a perfect seal for protection of the mud pump gear end. Features Fabricated with high quality steel. Numerically controlled machining. Long-lasting service life. Clamped and threaded. 14

17 INTUCTION FLUID END MODULES Our high-strength, triple reduction, forged steel triplex fluid end modules are made from the highest alloy steel. Heat treated for long working life, they are machined to perfection and packaged for delivery with anticorrosion protection. The precision-made jewelry-like exterior finish reflects our superior quality. Features Completely interchangeable with OEM. Premium-forged alloy steel. Made on CNC boring mills. Strict computer controlled heat treat procedures. Rigid inspection. Rated for all drilling operations up to 7,500 psi. 16

18 INTUCTION FLUID END ACCESSORIES TSC s fluid end accessories are available for most of the popular triplex mud pumps. CNC machining renders these accessories uniformly dimensional and interchangeable with OEM. The perfect exterior surface reflects our superior quality. Associated items Valve and cylinder head plug. Valve and cylinder head thread ring. Valve and cylinder head lock. Valve guide. Stud and nut. Specialty items. 17

64 FLUID END EXPENDABLES NATIONAL JWS /2 x 5 LINER S S SIZE URETHANE N"DURALL REPLACEABLE 3-1/2" TS HP G-925C LLU-34-K10 LL-34-K10 - I-34-K10. TM-34-KR 4" TS HP G-925C LLU-40-K10 LL-40-K10 - I-40-K10 TM-40-KR 4-1/2" TS Cr G-925C LLU-44-B10 LL-44-B10 HPW-44-B10 I-44-B10 TM-44-BR VALVES, SEATS, SPRINGS 4 WEB 3 WEB FULL OPEN ( 1 ) FULL OPEN ( 2 ) VALVE - - TS-1575M TS-4-V7 VALVE COVER GASKET G SUCTION SEAT - - TS-1571M TS-4-S17 CYLINDER HEAD GASKET - DISCHARGE SEAT SUCTION SPRING DISCHARGE SPRING (Urethane) (Rubber) - - TS-1572M TS-4-S TS TS WEAR PLATE GASKET TS TS TS-0697M TS-4-FIA EXTENSION SEAL TS-1577M - EXTENSION BAFFLE - & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM N/A TM-NUT1 N/A TM-165-A TM-165-B N/A TM-165-C FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET

65 FLUID END EXPENDABLES NATIONAL JWS /2 x 5 LINER S S SIZE URETHANE N"DURALL REPLACEABLE 3-1/2" TS HP G-925C LLU-34-K10 LL-34-K10 HPW-34-K10 I-34-K10 TM-34-KR 4" TS HP G-925C LLU-40-K10 LL-40-K10 HPW-40-K10 I-40-K10 TM-40-KR 4-1/2" TS Cr G-925C LLU-44-B10 LL-44-B10 HPW-44-B10 I-44-B10 TM-44-BR PLUNGER STUFFING BOX ADJUSTING NUT GLAND ADAPTER LUBE RING WASHER PACKING 2-3/4" TS TS TS TS TS TS TS TS TS TS TS TS TS /2" TS TS TS TS TS TS TS " TS TS TS TS TS TS TS VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE - - TS-1575M TS-4-V7 VALVE COVER GASKET G SEAT SUCTION SEAT DISCHARGE SUCTION SPRING DISCHARGE SPRING (Urethane) (Rubber) - - TS-1571M TS-4-S17 CYLINDER HEAD GASKET TS-1572M TS-4-S18 WEAR PLATE GASKET TS TS EXTENSION SEAL TS TS TS-1577M TS-4-FIA EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM N/A TM-NUT1 N/A TM-165-A TM-165-B N/A TM-165C FLUID END MODULE FLUID END MODULE MODULE SEAL SET STUDS & NUTS SET TS TMJWS34-SEALKIT TMJWS34-STUDSET 64

66 FLUID END EXPENDABLES NATIONAL JWS x 8-1/2 LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP G-272 LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP G-274 LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP G-276 LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP G-278 LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP - LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP G-280 LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR VALVES, SEATS, SPRINGS 4 WEB 3 WEB FULL OPEN ( 1 ) FULL OPEN ( 2 ) VALVE VALVE COVER GASKET - SEAT CYLINDER HEAD GASKET - SPRING WEAR PLATE GASKET - (Urethane) (Rubber) EXTENSION SEAL EXTENSION BAFFLE - & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM TM-NUT - - TM-400-A TM-400-B - TM-400-C FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET

67 FLUID END EXPENDABLES NATIONAL 7-P /4 x 7 LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP G-272 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP G-274 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP G-276 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP G-278 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP - LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP G-280 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP G-268 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE TS-5-M5B5 - - TS-5-V1 VALVE COVER GASKET G-788 * SEAT TS-5-DDB3 - - TS-5-S3 CYLINDER HEAD GASKET - SPRING TS TS WEAR PLATE GASKET TS (Urethane) (Rubber) TS-5-WI - - TS-5-FI EXTENSION SEAL TS EXTENSION BAFFLE - & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM07P N/A TM-NUT N/A TM-257-A TM-257-B N/A TM07P FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS

68 FLUID END EXPENDABLES NATIONAL 8-P /2 x 8-1/2 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP TS G-272 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP TS G-274 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP TS G-276 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-278 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP TS LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP TS G-280 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-268 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE TS-6-EH - TS-0995M TS-6-V1 VALVE COVER GASKET G-768 * SEAT TS-6-ADDB4 - TS-1450M TS-6-S4 CYLINDER HEAD GASKET - SPRING TS TS-0701M TS WEAR PLATE GASKET TS (Urethane) (Rubber) TS-6-WI - TS-6-MI TS-6-FI EXTENSION SEAL TS TS-6-WR - - TS-6-FR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM08P N/A TM-NUT N/A TM-259-A TM-259-B N/A TM08P FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS TM08P-SEALKIT TM08P-STUDSETD TM08P-STUDSETS 67

69 FLUID END EXPENDABLES NATIONAL 9-P /4 x 9 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP TS G-274 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP TS G-274 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP TS G-265 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-263 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP TS LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP TS G-261 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-283 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS G-768 * LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR 6 3/4" TS HP TS LLU-66-L15 LL-66-L15 HPW-66-L15 I-66-L15 TM-66-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE TS-6-EH - TS-0995M TS-6-V1 VALVE COVER GASKET G-768 * SEAT TS-6-ADDB4 - TS-1450M TS-6-S4 CYLINDER HEAD GASKET - SPRING TS TS-0701M TS WEAR PLATE GASKET TS (Urethane) (Rubber) TS-6-WI - TS-6-MI TS-6-FI EXTENSION SEAL TS TS-6-WR - - TS-6-FR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM09P N/A TM-NUT N/A TM-260-A TM-260-B N/A TM09P FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS TM09P-SEALKIT TM09P-STUDSETD TM09P-STUDSETS 68

70 FLUID END EXPENDABLES NATIONAL 10-P /4 x 10 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP TS G-274 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP TS G-274 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP TS G-265 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-263 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP TS LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP TS G-261 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-283 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS G-768 * LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR 6 3/4" TS HP TS LLU-66-L15 LL-66-L15 HPW-66-L15 I-66-L15 TM-66-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB FULL OPEN ( 1 ) F U L L O P E N ( 2 ) VALVE TS-6-EH - TS-0995M TS-6-V1 VALVE COVER GASKET G-768 * SEAT TS-6-ADDB4 - TS-1450M TS-6-S4 CYLINDER HEAD GASKET - SPRING TS TS-0701M TS WEAR PLATE GASKET TS (Urethane) (Rubber) TS-6-WI - TS-6-MI TS-6-FI EXTENSION SEAL TS TS-6-WR - - TS-6-FR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM10P N/A TM-NUT N/A TM-256-A TM-256-B N/A TM10P FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS TM10P-SEALKIT TM10P-STUDSETD TM10P-STUDSETS 69

71 FLUID END EXPENDABLES NATIONAL 12-P /2 x 12 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP TS G-265 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP TS G-265 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP TS G-265 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-263 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP TS LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP TS G-261 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-283 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS G-284 * LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR 6 3/4" TS HP TS G-287 * LLU-66-L15 LL-66-L15 HPW-66-L15 I-66-L15 TM-66-LR 7" TS HP TS G-285 * LLU-70-L15 LL-70-L15 HPW-70-L15 I-70-L15 TM-70-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE TS-7-EEF - TS-0985M TS-7-V1 VALVE COVER GASKET G-787 * SEAT TS-7-DDB12 - TS-1440M TS-7-S12 CYLINDER HEAD GASKET - SPRING TS TS-0702M TS L WEAR PLATE GASKET TS (Urethane) (Rubber) TS-7-WI - TS-7-MI TS-7-FI EXTENSION SEAL TS TS-7-WR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM12P N/A TM-NUT N/A TM-258-A TM-258-B N/A TM12P FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS TM12P-SEALKIT TM12P-STUDSETD TM12P-STUDSETS 70

72 FLUID END EXPENDABLES NATIONAL 12-P-160 FAST CHANGE 7-1/2 x 12 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP TS G-265 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP TS G-265 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP TS G-265 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-263 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP TS LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP TS G-261 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-283 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS G-284 * LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR 6 3/4" TS HP TS G-287 * LLU-66-L15 LL-66-L15 HPW-66-L15 I-66-L15 TM-66-LR 7" TS HP TS G-285 * LLU-70-L15 LL-70-L15 HPW-70-L15 I-70-L15 TM-70-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB FULL OPEN ( 1 ) F U L L O P E N ( 2 ) VALVE TS-7-EEF - TS-0985M TS-7-V1 VALVE COVER GASKET G-787 * SEAT TS-7-DDB12 - TS-1440M TS-7-S12 CYLINDER HEAD GASKET - SPRING TS TS-0702M TS L WEAR PLATE GASKET TS (Urethane) (Rubber) TS-7-WI - TS-7-MI TS-7-FI EXTENSION SEAL TS TS-7-WR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM12P N/A TM-NUT N/A TM-258-A TM-258-B N/A TM12P FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS TM12P-SEALKIT TM12PQ-STUDSETD TM12PQ-STUDSETS 71

73 FLUID END EXPENDABLES NATIONAL 12-P-160 (7500 PSI) 7-1/2 x 12 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 4" TS HP TS G-265 * LLU-40-K15 LL-40-K15 HPW-40-K15 I-40-K15 TM-40-KR 4 1/2" TS HP TS G-265 * LLU-44-B15 LL-44-B15 HPW-44-B15 I-44-B15 TM-44-BR 5" TS HP TS G-265 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-263 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP TS LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6" TS HP TS G-261 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-283 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS G-284 * LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR 6 3/4" TS HP TS G-287 * LLU-66-L15 LL-66-L15 HPW-66-L15 I-66-L15 TM-66-LR 7" TS HP TS G-285 * LLU-70-L15 LL-70-L15 HPW-70-L15 I-70-L15 TM-70-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE TS-7-EEF - TS-0985M TS-7-V1 VALVE COVER GASKET TS-SWP129 SEAT TS-7-DDB12 - TS-1440M TS-7-S12 CYLINDER HEAD GASKET - SPRING TS TS-0702M- TS L WEAR PLATE GASKET TS (Urethane) (Rubber) TS-7-WI - TS-7-MI TS-7-FI EXTENSION SEAL TS TS-7-WR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TM12P N/A TM-NUT N/A TM-258-A TM-258-B N/A TM12P FLUID END MODULE SUCTION MODULE DISCHARGE MODULE MODULE SEAL SET STUDS & NUTS SET TS TS TM12PHPM-SEALKIT TM12PHPM-STUDSETD TM12PHPM-STUDSETS 72

74 FLUID END EXPENDABLES NATIONAL 14-P x 14 ZIRCONIA LINER S S SIZE URETHANE N"DURALL REPLACEABLE 5" TS HP TS G-265 * LLU-50-B15 LL-50-B15 HPW-50-B15 I-50-B15 TM-50-BR 5 1/2" TS HP TS G-263 * LLU-54-B15 LL-54-B15 HPW-54-B15 I-54-B15 TM-54-BR 5 3/4" TS HP - LLU-56-B15 LL-56-B15 HPW-56-B15 I-56-B15 TM-56-BR 6 " TS HP TS G-261 * LLU-60-B15 LL-60-B15 HPW-60-B15 I-60-B15 TM-60-BR 6 1/4" TS HP TS G-283 * LLU-62-L15 LL-62-L15 HPW-62-L15 I-62-L15 TM-62-LR 6 1/2" TS HP TS G-284 * LLU-64-L15 LL-64-L15 HPW-64-L15 I-64-L15 TM-64-LR 6 3/4" TS HP TS G-287 * LLU-66-L15 LL-66-L15 HPW-66-L15 I-66-L15 TM-66-LR 7" TS HP TS G-285 * LLU-70-L15 LL-70-L15 HPW-70-L15 I-70-L15 TM-70-LR 7 1/4" TS HP TS LLU-72-L15 LL-72-L15 HPW-72-L15 I-72-L15 TM-72-LR 7 1/2" TS HP TS LLU-74-L15 LL-74-L15 HPW-74-L15 I-74-L15 TM-74-LR VALVES, SEATS, SPRINGS 4 WEB 3 WEB F U L L O P E N ( 1 ) F U L L O P E N ( 2 ) VALVE TS-U5B-23 - TS-0965M TS-8-V2 VALVE COVER GASKET TS SEAT TS-8-DDB7 - TS-1410M TS-8-S7 CYLINDER HEAD GASKET - SPRING TS WEAR PLATE GASKET TS (Urethane) (Rubber) TS-8-WI - TS-8-MI TS-8-FI EXTENSION SEAL - TS-8-WR EXTENSION BAFFLE TS & EXTENSION CLAMP STUD NUT THREADED TYPE SUB THREADED TYPE EXTENSION EXTENSION TS N/A TM-NUT N/A TM TS N/A TS FLUID END MODULE SUCTION MODULE STUDDED DISCHARGE MODULE STUDDED MODULE SEAL SET STUDS & NUTS SET TS TS TM14P-SEALKIT TM14P-STUDSETD TM14P-STUDSETS 73

100 FLUID END MODULE & ACCESSORIES TSC WFU340 ITEM DESCRIPTION QTY/PUMP TS-FEM340CA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 1-12) 1 1 TS CYLINDER ONLY 1 2 TS STUD, 1-3/8"x7-1/2" FLUID CYLINDER TO FRAME 12 3 TS NUT, 1-3/8" HEAVY HEX, FLUID CYLINDER TO FRAME 12 4 TS SCREW, 1/2"-13x2-1/4" 4 5 TS COVER, THREADED-TOP AND FRONT 6 6 TS SEAL, TOP AND FRONT COVER PLATE 6 7 TS PLATE, TOP AND FRONT COVER 6 8 TS RETAINER, DISCHARGE SPRING 3 9 TS BRACKET, SUCTION VALVE SPRING 3 10 TS SCREW, 1/2"x1-1/4" CAP 6 11 TS WASHER, 1/2" REG. SPRING LOCK 6 12 TS GASKET, SUCTION MANIFOLD 3 13 TS /4" SPRING WASHER TS BOLT 3/4"-10UNCx2"LG 10 99

102 FLUID END MODULE & ACCESSORIES TSC WF400 ITEM DESCRIPTION QTY/PUMP TS-FEMGDPAHCA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-18) 3 1 TS-200PJH029B FLUID END MODULE STUDDED (INCLUDES ITEM 2,4,5,10,11) 3 2 TS-200PJH029U FLUID END MODULE ONLY 3 3 TS-3PA587 THREADED CAP (COVER LOCK) 6 4 TS-79L142 DISCHARGE MANIFOLD STUD 12 5 TS-50B9 NUT, DISCHARGE MANIFOLD STUD 12 6 TS-200PJH147 VALVE COVER PAH 6 7 TS PAH DISCHARGE VALVE GUIDE BUSHING 3 8 TS-1PA217 PAH LINER CLAMP 3 9 TS-200PJH205 PAH SUCTION VALVE GUIDE RETAINER 3 10 TS-79AJ2 LINER CLAMP STUD TS-50B35 LINER CLAMP STUD NUT TS-200PJH715 VALVE COVER GASKET (G-799) 3 13 TS-200PJH483 VALVE GUIDE, SUCTION 3 14 TS-200PJH715 GASKET, CYLINDER HEAD (G-799) 3 15 TS-25AL54 GASKET, DISCHARGE MANIFOLD 3 16 TS-25G18 GASKET, SUCTION MANIFOLD 3 17 TMPAH-STUDSET PAH STUDS AND NUTS SET (INCLUDES 4 PCS TS-79L142, 4 PCS TS-50B9, 6 PCS TS-79AJ2, 12 PCS TS-50B35) 3 18 TMPAH-SEALKIT PAH MODULE SEAL KIT (INCLUDES TWO G-799, ONE TS-25AL54, ONE TS-25G18) 3 101

104 FLUID END MODULE & ACCESSORIES TSC WFU450 ITEM DESCRIPTION QTY/PUMP TS-FEMGDWFU45CA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-16) 1 TS-200PJH029BUS FLUID END MODULE STUDDED (INCLUDES ITEM 2,4,5,10,11) 3 2 TS-200PJH029BU FLUID END MODULE ONLY 3 3 TS-3PA587 THREADED CAP (COVER LOCK) 6 4 TS-79L142 DISCHARGE MANIFOLD STUD 12 5 TS-50B9 NUT, DISCHARGE MANIFOLD STUD 12 6 TS-200PJH147 VALVE COVER PAH 6 7 TS DISCHARGE VALVE GUIDE BUSHING 3 8 TS-1PA217 LINER CLAMP(FOR3" TO 5" LINER) 3 8A TS-1PA217B LINER CLAMP(FOR 5-1/2" AND 6" LINER) 3 8B A LINER ADAPTER(FOR 5-1/2" AND 6" LINER) 3 8C OR O RING(FOR 5-1/2" AND 6" LINER) 9 9 TS-200PJH205 SUCTION VALVE GUIDE RETAINER 3 10 TS-79AJ2 LINER CLAMP STUD TS-50B35 LINER CLAMP STUD NUT TS-200PJH715 VALVE COVER GASKET (G-799) 3 13 TS-200PJH483 VALVE GUIDE, SUCTION 3 14 TS-200PJH715 GASKET, CYLINDER HEAD (G-799) 3 15 TS-25AL54 GASKET, DISCHARGE MANIFOLD 3 16 TS-25G18 GASKET, SUCTION MANIFOLD 3 17 TMPAH-STUDSET STUDS AND NUTS SET (INCLUDES 4 PCS TS-79L142, 4 PCS TS-50B9, 6 PCS TS-79AJ2, 12 PCS TS-50B35) TMPAH-SEALKIT MODULE SEAL KIT (INCLUDES TWO G-799, ONE TS-25AL54, ONE TS-25G18) 3 103

106 FLUID END MODULE & ACCESSORIES TSC WWS500 ITEM DESCRIPTION QTY/PUMP TS-FEMWWS500CA FLUID END MODULE COMPLETE ASSEMBLY(INCLUDES ITEM 2-18) 1 1 TS-WWS500B FLUID END MODULE STUDDED (INCLUDES ITEM 2-6) 1 2 WF B FLUID END MODULE ONLY 1 3 TS-79AJ2 STUD, LINER CLAMP 18 4 TS-50B35 NUT, LINER CLAMP STUD 36 5 WWS STUD, DISCHARGE MANIFOLD 16 6 TS-50B34 NUT, DISCHARGE MANIFOLD STUD 16 7 TS-3PA587 THREADED CAP (COVER LOCK) 3 8 TS-200PJH147 VALVE COVER PAH 3 9 TS DISCHARGE VALVE GUIDE BUSHING 3 10 TS-200PJH715 VALVE COVER GASKET (G-799) 3 11 WF B SUCTION VALVE GUIDE RETAINER 3 12 TS-200PJH715 GASKET, CYLINDER HEAD (G-799) 3 13 WF B THREADED CAP (COVER LOCK) 3 14 WF B VALVE GUIDE, SUCTION 3 15 TS-1PA217 LINER CLAMP 3 16 R-27 GASKET, DISCHARGE MANIFOLD 2 17 TS-25G18 GASKET, SUCTION MANIFOLD 3 18 UBL SCREW, SUCTION MANIFOLD

108 FLUID END MODULE & ACCESSORIES TSC WF700 ITEM DESCRIPTION QTY/PUMP TS-FEMPZ789CA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-24) 1 TS-205PZL029D FLUID END MODULE STUDDED (INCLUDES ITEM 2-10) 3 2 TS FLUID END MODULE ONLY 3 3 TS-79L188 STUD, FRAME & LINER CLAMP 24 4 TS-50B36 NUT (FOR ABOVE) 48 5 TS-79L73 STUD, FRAME 12 6 TS-50AQ36 NUT (FOR ABOVE) 12 7 TS-79AL6 STUD, VALVE COVER 48 8 TS-50B34 NUT (FOR ABOVE) 48 9 TS-202PZL110 STUD, DISCHARGE MANIFOLD TS-50B34 NUT (FOR ABOVE) TS RING, VALVE COVER GASKET EXPANDER 6 12 TS GASKET, VALVE COVER (G-749) 6 13 TS BUSHING, VALVE GUIDE 6 14 TS COVER, VALVE 6 15 TS RING, VALVE COVER THREADED 6 16 TS CAP, VALVE COVER LOCK 6 17 TS PLATE, RETAINER 3 18 TS GUIDE, VALVE SUCTION 3 19 TS-95W2 WASHER, LOCK 1/2" 316SS 6 20 TS-655EE06S SCREW 1/2" 1-3/4" 316SS HX HD C/S 6 21 TS-25AL35 GASKET, DISCHARGE MANIFOLD 3 22 TS-25G41 GASKET, SUCTION MANIFOLD 3 23 TS-1PV14 CLAMP, LINER 3 24 TS ASSEMBLY, LOWER VALVE GUIDE (INCLUDES ITEM 13, 17-20) 3 25 TMPZ09-STUDSET 26 TMPZ09-SEALKIT PZ-7/8/9 STUDS AND NUTS SET (INCLUDES 8 PCS TS-79L188, 16 PCS TS-50B36, 4 PCS TS-79L73, 4 PCS TS-50AQ30, 16 PCS TS-79AL6, 4 PCS TS-202PZL110, 20 PCS TS-50B34) PAH MODULE SEAL KIT (INCLUDES TWO G-749, ONE TS-25AL35, ONE TS-25G41)

110 FLUID END MODULE & ACCESSORIES TSC WF1300B ITEM DESCRIPTION QTY/PUMP FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-13, 15, 20-23) 3 1 TS-202PZL029B FLUID END MODULE STUDDED (INCLUDES ITEM 2-9) 3 2 TS FLUID END MODULE ONLY 3 3 TS-201PZL110 STUD, FRAME & LINER CLAMP LONG 24 4 TS-205PZL110 STUD, SHORT 24 5 TS-50B36 NUT, FRAME & LINER CLAMP STUD 72 6 TS-204PZL110 STUD 72 7 TS-50B34 NUT (FOR ABOVE) 72 8 TS-202PZL110 STUD, DISCHARGE MANIFOLD 12 9 TS-50B34 NUT (FOR ABOVE STUD) (SAME AS ITEM 6) TS-200PL387 RING, VALVE COVER THREADED 6 11 TS-204PZL715 GASKET, VALVE COVER (G-798Z) 6 12 TS BUSHING, VALVE GUIDE 6 13 TS-200PZL147 COVER, VALVE 6 14 TS-25AL37 LINER GASKET (G-692) 3 15 TS-200PZL587 CAP, VALVE COVER LOCK 6 16 TS PLATE, RETAINER 3 17 TS-200PZL483 GUIDE, VALVE SUCTION 3 18 TS-95W2 WASHER, LOCK 1/2" 316SS 6 19 TS-655EE065 SCREW 1/2" 1-3/4" 316SS HX HD C/S 6 20 TS-25AL35 GASKET, DISCHARGE MANIFOLD 3 21 TS-25G41 GASKET, SUCTION MANIFOLD 3 22 TS-200PZL455 CLAMP, LINER 3 23 TS-200PZL483A ASSEMBLY, LOWER VALVE GUIDE(INCLUDES ITEM 12,16,17,18,19) 3 24 TMPZ11-STUDSET 25 TMPZ11-SEALKIT PZ-10/11 STUDS AND NUTS SET (INCLUDES 8 PCS TS-201PZL110, 8 PCS TS-205PZL110, 24 PCS TS-50B36, 24 PCS TS-204PZL110, 28 PCS TS-50B34, 4 PCS TS- 202PZL110) PZ-10/11 MODULE SEAL KIT (INCLUDES TWO G-798Z, ONE TS-25AL35, ONE TS-25G41)

112 FLUID END MODULE & ACCESSORIES TSC WF1300C ITEM DESCRIPTION QTY/PUMP TS-EMSFEF1000CA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-23) 3 1 TS FLUID END MODULE STUDDED (INCLUDES ITEM 2-8) 3 2 TS FLUID END MODULE (UNSTUDDED) 3 3 TS STUD FRAME 18 4 TS NUT (FOR ABOVE) 18 5 TS STUD, THREADED RING 30 6 TS NUT (FOR ABOVE) 30 7 TS STUD, DISCHARGE MANIFOLD 12 8 TS NUT (FOR ABOVE) 12 9 TS CAGE, LINER 3 10 TS GUIDE, LOWER VALVE (WITH BUSHING) 3 11 TS CLIP, LOCKING (FOR LOWER VALVE GUIDE) 3 12 TS GASKET, LINER/ CYLINDER HEAD (G-282) 6 13 TS PLUG, CYLINDER HEAD 3 14 TS RING, THREADED CYLINDER HEAD 3 15 TS CAP, THREADED CYLINDER HEAD 3 16 TS GASKET, VALVE COVER (G-740) 3 17 TS SCREW, RETAINER (UPPER) TS RETAINER PLATE (UPPER) 3 19 TS GUIDE, UPPER VALVE 3 20 TS COVER, VALVE POT 3 21 TS GASKET, DISCHARGE MANIFOLD 3 22 TS GASKET, SUCTION MANIFOLD 3 23 TS BUSHING, LOWER VALVE GUIDE 3 24 TMF10-STUDSET F-800/1000 STUDS AND NUTS SET (INCLUDES 6 PCS TS , 6 PCS TS , 10 PCS TS , 10 PCS TS , 4 PCS TS , 3 4 PCS TS ) 25 TMF10-SEALKIT F-800/1000 MODULE SEAL KIT (INCLUDES ONE G-282, ONE G-740, ONE TS , ONE TS ) 3 111

114 FLUID END MODULE & ACCESSORIES TSC WF1600 ITEM DESCRIPTION QTY/PUMP TS FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-24, 26-29) 3 1 TS FLUID END MODULE STUDDED (INCLUDES ITEM 2-9) 3 2 TS FLUID END MODULE ONLY (UNSTUDED) 3 3 TS STUD, MODULE TO LINER CLAMP 36 4 TS LINER CLAMP STUD NUT 36 5 TS POWER FRAME STUD 18 6 TS STUD, MODULE TO CYLINDER 30 7 TS NUT (FOR ABOVE) 48 8 TS STUD, MODULE TO DISC. MANIFOLD 12 9 TS NUT (FOR ABOVE) TS GUIDE, LOWER VALVE (WITH BUSHING) 3 11 TS BUSHING, LOWER VALVE GUIDE 3 12 TS LOCKBOLT, LOWER VALVE GUIDE 3 13 TS ALIGNMENT RING 3 14 TS GASKET, HEAD SEAL (G-801) 3 15 TS PLUG, CYLINDER HEAD 3 16 TS RING, THREADED CYLINDER HEAD 3 17 TS CAP, THREADED CYLINDER HEAD 3 18 TS GASKET, VALVE COVER (G-741) 3 19 TS SCREW, RETAINER (UPPER) TS PLATE, RETAINER (UPPER) 3 21 TS GUIDE, UPPER VALVE 3 22 TS COVER, VALVE POT 3 23 TS GASKET, WEAR PLATE (G-800) 3 24 TS PLATE, WEAR 3 25 TS GASKET, LINER (G-800) 3 26 TS RING, LINER THREADED 3 27 TS LINER LOCK 3 28 TS GASKET, DISCHARGE MANIFOLD 3 29 TS GASKET, SUCTION MANIFOLD 3 30 TMFB6-STUDSET FB-1300/1600 STUDS AND NUTS SET (INCLUDES 12 PCS TS , 12 PCS TS , 6 PCS TS , 6 PCS TS , 16 PCS TS , 4 PCS TS , 4 PCS TS ) 3 113

116 FLUID END MODULE & ACCESSORIES TSC WF1600L ITEM DESCRIPTION QTY/PUMP FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-13, 15, 20-23) 3 1 TS-202PZL029B FLUID END MODULE STUDDED (INCLUDES ITEM 2-9) 3 2 TS FLUID END MODULE ONLY 3 3 TS-201PZL110 STUD, FRAME & LINER CLAMP LONG 24 4 TS-205PZL110 STUD, SHORT 24 5 TS-50B36 NUT, FRAME & LINER CLAMP STUD 72 6 TS-204PZL110 STUD 72 7 TS-50B34 NUT (FOR ABOVE) 72 8 TS-202PZL110 STUD, DISCHARGE MANIFOLD 12 9 TS-50B34 NUT (FOR ABOVE STUD) (SAME AS ITEM 6) TS-200PL387 RING, VALVE COVER THREADED 6 11 TS-204PZL715 GASKET, VALVE COVER (G-798Z) 6 12 TS BUSHING, VALVE GUIDE 6 13 TS-200PZL147 COVER, VALVE 6 14 TS-25AL37 LINER GASKET (G-692) 3 15 TS-200PZL587 CAP, VALVE COVER LOCK 6 16 TS PLATE, RETAINER 3 17 TS-200PZL483 GUIDE, VALVE SUCTION 3 18 TS-95W2 WASHER, LOCK 1/2" 316SS 6 19 TS-655EE065 SCREW 1/2" 1-3/4" 316SS HX HD C/S 6 20 TS-25AL35 GASKET, DISCHARGE MANIFOLD 3 21 TS-25G41 GASKET, SUCTION MANIFOLD 3 22 TS-200PZL455 CLAMP, LINER 3 23 TS-200PZL483A ASSEMBLY, LOWER VALVE GUIDE(INCLUDES ITEM 12,16,17,18,19) 3 24 TMPZ11-STUDSET PZ-10/11 STUDS AND NUTS SET (INCLUDES 8 PCS TS-201PZL110, 8 PCS TS-205PZL110, 24 PCS TS-50B36, 24 PCS TS-204PZL110, 28 PCS TS-50B34, 4 PCS TS- 202PZL110) 3 115

118 FLUID END MODULE & ACCESSORIES TSC WF1600LH (7500 PSI) ITEM DESCRIPTION QTY/PUMP FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-23) 3 1 TS-300PZL2039OE FLUID END MODULE STUDDED (INCLUDES ITEM 2-7) 3 2 TS-300PZL029 FLUID END MODULE ONLY 3 3 TS-302PZL110OE STUD, LINER CLAMP & DISCHARGE MANIFOLD 48 4 TS-300PZL110OE STUD, FLUID CYLINDER TO FRAME ALIGNMENT(UPPER) 6 5 TS-303PZL110OE STUD, FLUID CYLINDER TO FRAME (LOWER) 6 6 TS-301PZL110OE STUD,THREADED RING 72 7 TS-50B36 NUT (FOR ABOVE) TS-316PZL316 SEAL, WEAR PLATE 3 9 TS-302PZL483 GUIDE,VALVE (UPPER) 3 10 TS-301PZL234 WEAR PLATE 3 11 TS-301PZL205 RETAINER, VALVE GUIDE 3 12 TS-309PZL316 SEAL, CYLINDER HEAD & VALVE COVER 6 13 TS-302PZL147 COVER, VALVE(UPPER) 3 14 TS-15P27 EYE BOLT 6 15 TS-300PZL387 RING, THREADED 6 16 TS-300PZL587 COVER LOCK 6 17 TS-25G41 GASKET, SUCTION MANIFOLD 3 18 TS-UBL SCREW, SUCTION MANIFOLD TS GASKET,DISCHARGE MANIFOLD 3 20 TS-300PZL229 BUSHING TS-303PZL147 COVER, VALVE(LOWER) 3 22 TS-303PZL483 GUIDE,VALVE (LOWER) 3 23 TS-300PZL455 LINER CLAMP 3 24 TMPZ11HP-STUDSSET PZ-11 HP STUDS AND NUTS SET (INCLUDES 12 PCS TS-302PZL110, 2 PCS TS-300PZL110, 2 PCS TS PZL110, 56 PCS TS-50B36, 28 PCS TS-302PZL110) 25 TMPZ11HP-SEALKIT PZ-11 HP MODULE SEAL KIT (INCLUDES TWO TS-309PZL316, ONE TS-303PZL316, ONE TS- 25G41, ONE TS ) 3 117

120 FLUID END MODULE & ACCESSORIES TSC WF1600BH (7500 PSI WORKING PRESSURE) ITEM DESCRIPTION QTY/PUMP TS OE FLUID END MODULE COMPLETE ASSEMBLY 3 1 TS MODULE, DISCHARGE ONLY 3 2 TS-NAT12P160PFSOE STUD, POWER FRAME 30 3 TS-NAT8P80TRSN NUT, POWER FRAME STUD 30 4 TS STUD, DISCHARGE TO SUCTION MODULE 24 5 TS-PEP55 NUT, DISCHARGE TO SUCTION STUD 24 6 TS STUD, THREADED RING 36 7 TS NUT, THREADED RING STUD 36 8 TS-IDT800DMSOE STUD, DISCHARGE MANIFOLD 12 9 TS-IDT800TRSN NUT, DISCHARGE MANIFOLD STUD TS MODULE, SUCTION ONLY 3 11 TS STUD, THREADED RING TS NUT, THREADED RING STUD TS-PEP75 STUD, LINER BUSHING TS CAP, THREAD 6 15 TS RING, THREAD 6 16 TS VALVE COVER 6 17 TS-12PVGASW VALVE GUIDE 6 18 TS CAP SCREW, VALVE GUIDE TS-PZ789VGI BUSHING, VALVE GUIDE 6 20 TS-SWP129 SEAL, VALVE COVER 6 21 TS PIN, DOWEL 6 22 TS GASKET, WEAR PLATE AND LINER 6 23 TS-PP602160SW WEAR LPATE 3 24 TS-12PLASW FLANGE, LINER RETAINER (LINER BUSHING) 3 25 TS-12PLANSW NUT, LINER RETAINER 3 26 TS SEAL, DISCHARGE MANIFOLD 3 27 TS GASKET, SUCTION MANIFOLD 3 28 TS CAP SCREW, SUCTION MANIFOLD

122 FLUID END MODULE & ACCESSORIES TSC WF2000 (7500 PSI WORKING PRESSURE) ITEM DESCRIPTION QTY/PUMP TS OE FLUID END MODULE COMPLETE ASSEMBLY 3 1 TS MODULE, DISCHARGE ONLY 3 2 TS-NAT12P160PFSOE STUD, POWER FRAME 30 3 TS-NAT8P80TRSN NUT, POWER FRAME STUD 30 4 TS STUD, DISCHARGE TO SUCTION MODULE 24 5 TS-PEP55 NUT, DISCHARGE TO SUCTION STUD 24 6 TS STUD, THREADED RING 36 7 TS NUT, THREADED RING STUD 36 8 TS-IDT800DMSOE STUD, DISCHARGE MANIFOLD 12 9 TS-IDT800TRSN NUT, DISCHARGE MANIFOLD STUD TS MODULE, SUCTION ONLY 3 11 TS STUD, THREADED RING TS NUT, THREADED RING STUD TS-PEP75 STUD, LINER BUSHING TS CAP, THREAD 6 15 TS RING, THREAD 6 16 TS VALVE COVER 6 17 TS-12PVGASW VALVE GUIDE 6 18 TS CAP SCREW, VALVE GUIDE TS-PZ789VGI BUSHING, VALVE GUIDE 6 20 TS-SWP129 SEAL, VALVE COVER 6 21 TS PIN, DOWEL 6 22 TS GASKET, WEAR PLATE AND LINER 6 23 TS-PP602160SW WEAR LPATE 3 24 TS-12PLASW FLANGE, LINER RETAINER (LINER BUSHING) 3 25 TS-12PLANSW NUT, LINER RETAINER 3 26 TS SEAL, DISCHARGE MANIFOLD 3 27 TS GASKET, SUCTION MANIFOLD 3 28 TS CAP SCREW, SUCTION MANIFOLD

124 FLUID END MODULE & ACCESSORIES TSC WF2200 ITEM DESCRIPTION QTY/PUMP TS ASSY, COMPLETE FLUID END W/ VALVE SERVICE & SUCTION MANIFOLD 3 1 TS MODULE, STUDDED FLUID END DISCHARGE (INCLUDES ITEMS 2-10) 3 2 TS DISCHARGE MODULE ONLY 3 3 TS STUD, POWER FRAME 30 4 TS NUT, POWER FRAME STUD 30 5 TS STUD, LINER BUSHING 18 6 TS NUT, LINER BUSHING STUD 18 7 TS STUD, SUCTION TO DISCHARGE MODULE 18 8 TS NUT, SUCTION TO DISCHARGE MODULE STUD 18 9 TS STUD, VALVE COVER TS NUT, VALVE COVER STUD TS MODULE, STUDDED FLUID END SUCTION (INCLUDES ITEMS 12-14) 3 12 TS SUCTION MODULE ONLY 3 13 TS STUD, VALVE COVER TS NUT, VALVE COVER STUD TS BUSHING, LINER 3 16 TS CAP, VALVE COVER (THREADED) 6 17 TS RING, THREADED 6 18 TS RETAINER, SEAL 6 19 TS PULLER, SEAL RETAINER 6 20 TS SEAL, VALVE COVER 6 21 TS HOLDER, VALVE GUIDE 6 22 TS , VALVE GUIDE 6 23 TS PIN, DOWELL 6 24 TS SEAL, MODULE & WEAR PLATE 6 25 TS PLATE, WEAR 3 26 TS CONNECTOR, DISCHARGE 2 27 TS RING, DISCHARGE CONNECTOR BACK UP 4 28 TS CAPSCREW, DISCHARGE CONNECTOR TS WASHER, DISCHARGE CONNECTOR CAPSCREW TS ADAPTER, DISCHARGE CONNECTOR 2 31 TS SEAL, DISCHARGE CONNECTOR TO DISCHARGE ADAPTER 2 32 TS SEAL, DISCHARGE CONNECTOR & DISCHARGE ADAPTER 4 33 TS CLAMP COMPLETE, LINER 3 34 TS CAPSCREW, LINER CLAMP 6 35 TS NUT, LINER CAPSCREW 6 36 TS PIN, LINER CLAMP 6 37 TS CONNECTOR, LINER CLAMP 6 38 TS CAPSCREW, DISCHARGE SPACER FLANGE TS STUD, DISCHARGE FLANGE TS NUT, DISCHARGE FLANGE STUD TS SEAL, SUCTION MANIFOLD 3 123

126 FLUID END MODULE & ACCESSORIES CONTINENTAL EMSCO F-350, F-500, F650 ITEM DESCRIPTION QTY/PUMP TS-EMSFEMF500CA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-23) 1 TS FLUID END MODULE STUDDED (INCLUDES ITEM 2-8) 3 2 TS U FLUID END MODULE (UNSTUDDED) 3 3 TS STUD FRAME 18 4 TS NUT (FOR ABOVE) 18 5 TS STUD, THREADED RING 36 6 TS NUT (FOR ABOVE) 36 7 TS STUD, DISCHARGE MANIFOLD 12 8 TS NUT (FOR ABOVE) 12 9 TS CAGE, LINER 3 10 TS GUIDE, LOWER VALVE (WITH BUSHING) 3 11 TS CLIP, LOCKING (FOR LOWER VALVE GUIDE) 3 12 TS GASKET, LINER/ CYLINDER HEAD (G-281) 6 13 TS PLUG, CYLINDER HEAD 3 14 TS RING, THREADED CYLINDER HEAD 3 15 TS CAP, THREADED CYLINDER HEAD 3 16 TS GASKET, VALVE COVER (G-733) 3 17 TS SCREW, RETAINER (UPPER) TS RETAINER PLATE (UPPER) 3 19 TS GUIDE, UPPER VALVE 3 20 TS COVER, VALVE POT 3 21 TS GASKET, DISCHARGE MANIFOLD 3 22 TS GASKET, SUCTION MANIFOLD 3 23 TS BUSHING, LOWER VALVE GUIDE 3 24 TMF05-STUDSET F-500 STUDS AND NUTS SET(INCLUDES 6 PCS TS , 6 PCS TS , 12 PCS TS , 16 PCS TS , 4 PCS TS ) TMF05-SEALKIT F-800/1000 MODULE SEAL KIT (INCLUDES ONE G-282, ONE G-740, ONE TS , ONE TS ) 3 125

128 FLUID END MODULE & ACCESSORIES CONTINENTAL EMSCO F-800, F-1000 ITEM DESCRIPTION QTY/PUMP TS-EMSFEF1000CA FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-23) 1 TS FLUID END MODULE STUDDED (INCLUDES ITEM 2-8) 3 2 TS FLUID END MODULE (UNSTUDDED) 3 3 TS STUD FRAME 18 4 TS NUT (FOR ABOVE) 18 5 TS STUD, THREADED RING 30 6 TS NUT (FOR ABOVE) 30 7 TS STUD, DISCHARGE MANIFOLD 12 8 TS NUT (FOR ABOVE) 12 9 TS CAGE, LINER 3 10 TS GUIDE, LOWER VALVE (WITH BUSHING) 3 11 TS CLIP, LOCKING (FOR LOWER VALVE GUIDE) 3 12 TS GASKET, LINER/ CYLINDER HEAD (G-282) 6 13 TS PLUG, CYLINDER HEAD 3 14 TS RING, THREADED CYLINDER HEAD 3 15 TS CAP, THREADED CYLINDER HEAD 3 16 TS GASKET, VALVE COVER (G-740) 3 17 TS SCREW, RETAINER (UPPER) TS RETAINER PLATE (UPPER) 3 19 TS GUIDE, UPPER VALVE 3 20 TS COVER, VALVE POT 3 21 TS GASKET, DISCHARGE MANIFOLD 3 22 TS GASKET, SUCTION MANIFOLD 3 23 TS BUSHING, LOWER VALVE GUIDE 3 24 TMF10-STUDSET F-800/1000 STUDS AND NUTS SET(INCLUDES 6 PCS TS , 6 PCS TS , 10 PCS TS , 10 PCS TS , 4 PCS TS , 4 PCS TS ) TMF10-SEALKIT F-800/1000 MODULE SEAL KIT (INCLUDES ONE G-282, ONE G-740, ONE TS , ONE TS ) 3 127

130 FLUID END MODULE & ACCESSORIES CONTINENTAL EMSCO FB-1300, FB-1600 ITEM DESCRIPTION QTY/PUMP TS FLUID END MODULE COMPLETE ASSEMBLY (INCLUDES ITEM 2-24, 26-29) 1 TS FLUID END MODULE STUDDED (INCLUDES ITEM 2-9) 3 2 TS FLUID END MODULE ONLY (UNSTUDED) 3 3 TS STUD, MODULE TO LINER CLAMP 36 4 TS LINER CLAMP STUD NUT 36 5 TS POWER FRAME STUD 18 6 TS STUD, MODULE TO CYLINDER 30 7 TS NUT (FOR ABOVE) 48 8 TS STUD, MODULE TO DISC. MANIFOLD 12 9 TS NUT (FOR ABOVE) TS GUIDE, LOWER VALVE (WITH BUSHING) 3 11 TS BUSHING, LOWER VALVE GUIDE 3 12 TS LOCKBOLT, LOWER VALVE GUIDE 3 13 TS ALIGNMENT RING 3 14 TS GASKET, HEAD SEAL (G-801) 3 15 TS PLUG, CYLINDER HEAD 3 16 TS RING, THREADED CYLINDER HEAD 3 17 TS CAP, THREADED CYLINDER HEAD 3 18 TS GASKET, VALVE COVER (G-741) 3 19 TS SCREW, RETAINER (UPPER) TS PLATE, RETAINER (UPPER) 3 21 TS GUIDE, UPPER VALVE 3 22 TS COVER, VALVE POT 3 23 TS GASKET, WEAR PLATE (G-800) 3 24 TS PLATE, WEAR 3 25 TS GASKET, LINER (G-800) 3 26 TS RING, LINER THREADED 3 27 TS LINER LOCK 3 28 TS GASKET, DISCHARGE MANIFOLD 3 29 TS GASKET, SUCTION MANIFOLD 3 30 TMFB6-STUDSET 31 TMFB6-SEALKIT FB-1300/1600 STUDS AND NUTS SET (INCLUDES 12 PCS TS , 12 PCS TS , 6 PCS TS , 6 PCS TS , 16 PCS TS , 4 PCS TS , 4 PCS TS ) FB-1300/1600 MODULE SEAL KIT (INCLUDES ONE G-800, ONE G-741, ONE G-801, ONE TS , ONE TS )

132 F