nov 10-p-130 mud pump in stock

National Oilwell Varco’s 10-P-130 Mud Pump is rated at 1300 input horsepower (969 kw) at 140 strokes per minute, with a 10-inch (254 mm) stroke. Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications. Current OEM inspection reports are available upon request. All pumps are within OEM Specifications.

NOV 10-P-130 Mud Pump Fliud End Suction Module 1290338 1290339 Mud Pumps For Drilling Rigs standard one-and/or-two-piece configuration, with designs available for pressure of 5000psi(35.1Mpa), 7500psi(52.7Mpa), and 10000psi(70.3Mpa); discharge connections available on each side; suction connections on each side or front center.

For maximum performance and durability, our modules are made from individually forged, heat-treated alloy steel and feature an API 7 valve assembly for improved flow. Our L-shaped design features bore-seal technology for improved seal performance in higher pressures and is compatible with numerous “F-Series” drilling pumps including Honghua®, Bomco® Rongsheng®, Workforce® and other similar designs.

RIG/PLANT REFERENCE REFERENCE DESCRIPTION 10-P-130 Triplex Mud PumpADDITIONAL CODE SDRL CODE TOTAL PGS This document contains proprietary and confidential information National Oilwell Varco which belongs to National Oilwell Varco; it is loaned for limited 10353 Richmond Ave.REMARKS purposes only and remains the property of National Oilwell Varco. Reproduction, in whole or in part; or use of this design or Houston, TX 77042MAIN TAG NUMBER DISCIPLINE distribution of this information to others is not permitted without the Phone +1-832-424-7300 express written consent of National Oilwell Varco. This document is to be returned to National Oilwell Varco upon request and in anyCLIENT PO NUMBER event upon completion of the use for which it was loaned.  National Oilwell VarcoCLIENT DOCUMENT NUMBER DOCUMENT NUMBER REV

www.natoil.com Document number 10-P-130-DAS-001 Revision 03 Page 2

www.natoil.com Document number 10-P-130-DAS-001 Revision 03 Page 3

www.natoil.com Document number 10-P-130-DAS-001 Revision 03 Page 4

www.natoil.com Document number 10-P-130-DAS-001 Revision 03 Page 5

www.natoil.com Document number 10-P-130-DAS-001 Revision 03 Page 6

1. Dimensions 2. Height, floor to center of front inlet suction, inches (mm) 13 ¼ (337) 3. Height, floor to center of discharge, inches (mm) 39 ¼ (997) 186 ⁄8 (4740) 5 4. Overall length over skids, inches (mm) 71 ⁄8 (1813) 3 5. Width over frame, inches (mm) 6. Width over pinion shaft, inches (mm) 107 ¼ (2724) 7. Height, floor to top of gear case, inches (mm) 67 (1702) 55 ⁄8 (1419) 7 8. Height over fluid cylinders, inches (mm) 9. Weight-complete, less sheave, lbs. (kg) 42,550 (19,300) 10. Fluid Connections 11. Suction connection 8” ASA-150 lb. R.J. flange 12. Discharge connection, cross 5” API-5000 lb. R.J. flange 13. Capacity Data 14. Maximum liner bore, inches (mm) 6 ¾ (171.5) 15. Stroke, inches (mm) 10 (254) 16. Maximum input horsepower (kW) 1300 (969) 17. Rated pump speed, spm 140 18. Pinion Speed 399 2 19. Hydrostatic test pressure of fluid cylinders, psi (kg/cm ) 10,000 (703) 20. Mechanical Data 21. Fluid cylinder Steel, 2 piece interchangeable modular design 22. Valves, API number MOD. 6 23. Valve seats Bottom shouldering, modified for high pressure 24. Piston rod-piston connection Piloted and shouldered, National CB-4 25. Piston rod-intermediate rod connection Piloted and shouldered, metal-to-metal lock 26. Type of gears Relieved herringbone 27. Gear ratio 2.853:1 28. Gear and pinion Through hardened alloy 29. Type of crosshead pin Tapered 30. Number and type of pinion shaft bearing 2 self aligning roller 31. Number and type of main bearing 2 double row tapered roller 32. Number and type of crosshead bearing 3 double row needle Number and type of crankshaft-connecting rod 33. 3 cylindrical roller bearing 34. Double extension on pinion shaft, inches (mm) 8 ½ Dia. x 19 ½ Long (215.9 x 495.3) Sprocket with QD Hub Type S-Dual Electric 35. Two- 75T 1½” pitch quint. Motor Drive (Drive sprocket 1200 RPM max.) 36. Ind. or rig drive-drive sprocket 1100 rpm max. 75T 1½” pitch octuple 53” OD 18-8V Section belts 37. Sheave, QD Hub Type S 52” PD26-D Section Belts