pressure washer mud pump supplier

Pressure washer sludge pump attachments by leading manufacturer Suttner turn your power washer into a high output pump with ease. Available in 15 and 25 ft hose lengths, with a max pressure rating of 4000 psi. Contact us for help selecting the right sludge pump attachment for your pressure washer.

Pressure-Washer-Parts.com may store and sell products and chemicals that are known to the State of California to cause cancer, birth defects, and other reproductive harm.

The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that can vacuum up slurry solutions. Debris as large as 3/4" diameter will pass through the casting and out the discharge hose.

Based on clean water, the liquid ratio is about 1:11. If you are using a washer pumping 4 gpm, the output produced is about 44 gpm. Cleaning up chemical spills will not damage your washer pump. Applications may include: removing slurry from car wash pit, flood clean-up, removing rain water from construction site, empty pools, liquid transfer, run-off clean-up, etc.

Use with Spiroflex hose 1-1/2". 3/8" Hansen plug on inlet. OPERATION: (1). The high pressure line of the pressure washer is connected to the sludge vacuum attachment. The operator may connect the high pressure hose to the sludge vacuum inlet, or choose to hook the wand to the inlet. Water flow can then be controlled with the trigger gun. The inlet is normally a 1/4" QC plug or M22 screw nipple for quick attachment. After securing the attachment, run the pressure washer as normally instructed. (2). When the pressure washer is running, the exits a zero degree high pressure nozzle inside the durable aluminum die casting. This nozzle should have the same size orifice as the normal fan nozzles to produce the maximum pressure and flow from the unit. The velocity of the water flow exiting the nozzle creates a powerful venturi suction. This suction power can pick up the slurry, along with rocks and devbris up to 3/4" in diameter. Ensure the outlet hose is directed proper and place the sludge vacuum into the flood waters. It may be submerged all the way to the floor. The casting has small feet on it to keep it off the floor. (3). The operator should grip the outlet hose firmly, or secure it close to the end. If not held, the force of 40 to 60 GPM of liquid flowing through the discharge hose may cause it to push around. The discharge hose is normally 15" to 25" long. Lengths of 100" can be purchased. Direct the discharge peoperly. Operators may need to check with authorities to see about discharging into a city drain. Many simply let it flow out onto lower ground, or dump it into a liquid tank truck. When the mucky water has been removed, the pressure washer can be used to finish the cleaning job.

We have the tools you need to effectively use and maintain your pressure washer. Quick connect and rotating turbo nozzles are available in various sizes and configurations. It"s important to use the proper size nozzle for your pressure washer. Nozzles are sized by looking at the PSI and GPM of your pressure washer. Quick connect nozzles make it easy to change spray patterns or replace nozzles when they are bad while using the same spray wand.

Pressure washer hoses and hose reels will help you reach your work area, and specialized spray guns with different angles and lengths of wands will make certain jobs easier.

To keep your pressure washer working properly, routine parts and maintenance could be required. Pressure washer pumps, unloaders, and motors should match the specifications of your particular machine. Hot pressure washers and steam cleaners require additional components like burners, ignitors, and fuel pumps to allow them to heat the water.

There are a number of different accessories for your hot or cold pressure washer to clean different areas. Surface cleaners are great for cleaning large areas like parking lots, gas stations, industrial facilities, and school yards. Duct cleaners are designed to clean trash-chutes, vents, ducts, restaurant hoods, tanks and more. Wet sand blasterscan be used on various surfaces to remove most coatings down to white metal, for graffiti cleaning, or paint surface preparation.

The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that can vacuum up slurry solutions. Debris as large as 3/4" diameter will pass through the casting and out the discharge hose.

Based on clean water, the liquid ratio is about 1:11. If you are using a washer pumping 4 gpm, the output produced is about 44 gpm. Cleaning up chemical spills will not damage your washer pump. Applications may include: removing slurry from car wash pit, flood clean-up, removing rain water from construction site, empty pools, liquid transfer, run-off clean-up, etc.

Use with Spiroflex hose 1-1/2". 3/8" Hansen plug on inlet. OPERATION: (1). The high pressure line of the pressure washer is connected to the sludge vacuum attachment. The operator may connect the high pressure hose to the sludge vacuum inlet, or choose to hook the wand to the inlet. Water flow can then be controlled with the trigger gun. The inlet is normally a 1/4" QC plug or M22 screw nipple for quick attachment. After securing the attachment, run the pressure washer as normally instructed. (2). When the pressure washer is running, the exits a zero degree high pressure nozzle inside the durable aluminum die casting. This nozzle should have the same size orifice as the normal fan nozzles to produce the maximum pressure and flow from the unit. The velocity of the water flow exiting the nozzle creates a powerful venturi suction. This suction power can pick up the slurry, along with rocks and devbris up to 3/4" in diameter. Ensure the outlet hose is directed proper and place the sludge vacuum into the flood waters. It may be submerged all the way to the floor. The casting has small feet on it to keep it off the floor. (3). The operator should grip the outlet hose firmly, or secure it close to the end. If not held, the force of 40 to 60 GPM of liquid flowing through the discharge hose may cause it to push around. The discharge hose is normally 15" to 25" long. Lengths of 100" can be purchased. Direct the discharge peoperly. Operators may need to check with authorities to see about discharging into a city drain. Many simply let it flow out onto lower ground, or dump it into a liquid tank truck. When the mucky water has been removed, the pressure washer can be used to finish the cleaning job.

We have the tools you need to effectively use and maintain your pressure washer. Quick connect and rotating turbo nozzles are available in various sizes and configurations. It"s important to use the proper size nozzle for your pressure washer. Nozzles are sized by looking at the PSI and GPM of your pressure washer. Quick connect nozzles make it easy to change spray patterns or replace nozzles when they are bad while using the same spray wand.

Pressure washer hoses and hose reels will help you reach your work area, and specialized spray guns with different angles and lengths of wands will make certain jobs easier.

To keep your pressure washer working properly, routine parts and maintenance could be required. Pressure washer pumps, unloaders, and motors should match the specifications of your particular machine. Hot pressure washers and steam cleaners require additional components like burners, ignitors, and fuel pumps to allow them to heat the water.

There are a number of different accessories for your hot or cold pressure washer to clean different areas. Surface cleaners are great for cleaning large areas like parking lots, gas stations, industrial facilities, and school yards. Duct cleaners are designed to clean trash-chutes, vents, ducts, restaurant hoods, tanks and more. Wet sand blasterscan be used on various surfaces to remove most coatings down to white metal, for graffiti cleaning, or paint surface preparation.

Turn your pressure washer into a sludge, slurry or water evacuation tool. Pressure energy from the spray of a pressure washer wand creates suction that pulls water, up to 87gpm, through a heavy wall discharge hose.

We offer many options to handle your pumping and pressure washing needs. Our op discharge provides maximum motor cooling while allowing continuous duty operation.

General Pump balances technology, engineering, and stellar customer service. A world class distribution center, we bring you the exact pump products you need, backed up by industry knowledge and decades of expertise. We supply pump products for a wide variety of markets and applications, and are unfailingly committed to our customers’ satisfaction and success.

Backed by the industry"s best delivery, customer service, and technical support, Cat Pumps products and service parts are readily available when you need them. A worldwide network of highly qualified distributors provides sales and service support for pumps, parts and accessories when servicing is required.

Are you looking for a replacement pump for your pressure washer? Are you trying to decide between a new pump or a rebuild? No matter what you own, you can get parts and pumps from a wide range of pressure washer pump brands at www.pwoutlet.com. We carry pumps from the most popular power washer pump suppliers, including Annovi Reverberi (AR), Hawk, General Pump, Cat Pumps, Comet and more. We also have replacements from all the pressure washer pump brands under the FNA Group, including FAIP, OEM, Simpson and AAA. If you need to replace the pump on your pressure washer, we"re confident that you"ll find the exact part you"re looking for here at pwoutlet.com. We stock replacement pumps for both residential and commercial equipment and carry units to fit most every brand of power washer sold. Free shipping is included on all pumps sold.

Shopping by pump manufacturers makes selection simple. If you know the power washer pump manufacturer you need, simply click on your desired manufacturer and you"ll find a detailed listing of specific pumps, along with photos and specifications. If you"re unsure of the manufacturer name, you�ll need to click on the "Pumps-All" category on the left side of this page. You"ll then be given the option to choose by the brand name and model number of your machine or, if that information"s not available, our Pump Selector Assistant will walk you through a step-by-step process for selecting the correct replacement pump for your unit.

Our offerings include units from top power washer pump manufacturers for both homeowner and industrial pumps. Looking for OEM parts from these pressure washer pumps manufacturers? We carry those too. Whether you have a plunger, vertical-shaft, axial or triplex pump, you can get what you need to get your pressure washer back in working condition. Each listing includes shaft sizes and flow rates, so you can easily find a unit that works with your washer.

At pwoulet we carry only the top pressure washer manufacturers. You deserve the best pressure washer pumps because your business depends on it. Find high-quality products at great prices here and enjoy.

Since 1981 watercannon.com, has been a powerful industry supplier, providing high quality pressure washers, parts, pumps & accessories for the Cleaning, construction & plumbing Industries.

Use with Spiroflex hose 1-1/2″ not included, 3/8″ Hansen plug on inlet. OPERATION: (1). The high pressure line of the pressure washer is connected to the sludge vacuum attachment. The operator may connect the high pressure hose to the sludge vacuum inlet, or choose to hook the wand to the inlet. Water flow can then be controlled with the trigger gun. The inlet is normally a 1/4″ QC plug or M22 screw nipple for quick attachment. After securing the attachment, run the pressure washer as normally instructed. (2). When the pressure washer is running, the exits a zero degree high pressure nozzle inside the durable aluminum die casting. This nozzle should have the same size orifice as the normal fan nozzles to produce the maximum pressure and flow from the unit. The velocity of the water flow exiting the nozzle creates a powerful venturi suction. This suction power can pick up the slurry, along with rocks and devbris up to 3/4″ in diameter. Ensure the outlet hose is directed proper and place the sludge vacuum into the flood waters. It may be submerged all the way to the floor. The casting has small feet on it to keep it off the floor. (3). The operator should grip the outlet hose firmly, or secure it close to the end. If not held, the force of 40 to 60 GPM of liquid flowing through the discharge hose may cause it to push around. The discharge hose is normally 15′ to 25′ long. Lengths of 100′ can be purchased. Direct the discharge peoperly. Operators may need to check with authorities to see about discharging into a city drain. Many simply let it flow out onto lower ground, or dump it into a liquid tank truck. When the mucky water has been removed, the pressure washer can be used to finish the cleaning job.

Use this Suttner ST-36 Sludge Pump for removing rainwater from construction sites, cleaning up chemical spills, run-off clean-up, or any time you need to move liquid off a job site. Debris as large as 3/4 inch is able to pass through the casting and out your discharge hose. Based on clean water, this pump can move a ratio of 1:11, for example, if you"re using a 5 GPM pressure washer, you"ll move 55 GPM. This pump can move such a large amount of liquid in such a short time because the water flowing through the high-pressure nozzle creates a powerful venturi suction. All you need to do is attach a pressure line from a portable pressure washer.

The CAT Pumps brand is synonymous with quality in the high-pressure pump market. We are proud to offer the best selection of genuine CAT plunger and piston pumps that serve the car wash and pressure washing industries. Many different models with varying pressure, flow rate, and port specifications. Catpumpsandparts.com also sells the OEM CAT parts and accessories you need to repair, maintain, and maximize the potential of your pumps!