pressure washer mud pump brands

Pressure washer sludge pump attachments by leading manufacturer Suttner turn your power washer into a high output pump with ease. Available in 15 and 25 ft hose lengths, with a max pressure rating of 4000 psi. Contact us for help selecting the right sludge pump attachment for your pressure washer.

Pressure-Washer-Parts.com may store and sell products and chemicals that are known to the State of California to cause cancer, birth defects, and other reproductive harm.

This awesome pump turns your pressure washer into a high volume sludge pump that can pump rocks and debris up to 3/4" in diameter! This pump quickly attaches to your existing pressure hose. During use it will provide a 11 to 1 or higher vacuum (4GPM produces 44GPM vacuum). The sludge pump is great for removing water from low areas, getting started with waste water reclaim, pool emptying, and flood and disaster clean up.

Attaches to any pressure washer and turns it into a high volume output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills.

Easily attaches to pressure washer and turns it into a high output pump. Great for flood clean up, car wash pits, emptying pools or chemical spills (discharge hose sold separately).

Turn your pressure washer into a sludge, slurry or water evacuation tool. Pressure energy from the spray of a pressure washer wand creates suction that pulls water, up to 87gpm, through a heavy wall discharge hose.

Suttner ST-36 Sludge Pump (04.0) w/ 25" Hose, 1/4" QC Inlet. Attaches to pressure washer and turns it into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Suttner ST-36 Sludge Pump Casting with Hose Barb. Turns a pressure washer into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Known as a leader in plunger pumps for the pressure cleaning industry, we have expanded to fully serve Vehicle Washing and many additional industrial applications, including Sewer Jetting, Oil and Gas, Mining, Misting, and many more.

Our in-house design team works to engineer, design, and create prototypes based on our customers’ requirements and the applications for which their pump will be used. We work with you to customize your new product, using 3D CAD modeling and ANSYS fluid and stress analysis software.

The ST-36 sludge vacuum is a great tool for transferring a large amount of water or slurry in a short time. Simply attach the pressure line from a portable power washer or car wash bay. The water flowing through the high pressure nozzle creates a powerful venturi suction that can vacuum up slurry solutions. Debris as large as 3/4″ diameter will pass through the casting and out the discharge hose.

Based on clean water, the liquid ratio is about 1:11. If you are using a washer pumping 4 gpm, the output produced is about 44 gpm. Cleaning up chemical spills will not damage your washer pump. Applications may include: removing slurry from car wash pit, flood clean-up, removing rain water from construction site, empty pools, liquid transfer, run-off clean-up, etc.

OPERATION: (1). The high pressure line of the pressure washer is connected to the sludge vacuum attachment. The operator may connect the high pressure hose to the sludge vacuum inlet, or choose to hook the wand to the inlet. Water flow can then be controlled with the trigger gun.   After securing the attachment, run the pressure washer as normally instructed. (2). When the pressure washer is running, the exits a zero degree high pressure nozzle inside the durable aluminum die casting. This nozzle should have the same size orifice as the normal fan nozzles to produce the maximum pressure and flow from the unit. The velocity of the water flow exiting the nozzle creates a powerful venturi suction. This suction power can pick up the slurry, along with rocks and debris up to 3/4″ in diameter. Ensure the outlet hose is directed proper and place the sludge vacuum into the flood waters. It may be submerged all the way to the floor. The casting has small feet on it to keep it off the floor. (3). The operator should grip the outlet hose firmly, or secure it close to the end. If not held, the force of 40 to 60 GPM of liquid flowing through the discharge hose may cause it to push around. The discharge hose is normally 15′ to 25′ long. Lengths of 100′ can be purchased. Direct the discharge properly. Operators may need to check with authorities to see about discharging into a city drain. Many simply let it flow out onto lower ground, or dump it into a liquid tank truck. When the mucky water has been removed, the pressure washer can be used to finish the cleaning job.

Backed by the industry"s best delivery, customer service, and technical support, Cat Pumps products and service parts are readily available when you need them. A worldwide network of highly qualified distributors provides sales and service support for pumps, parts and accessories when servicing is required.

Use this Suttner ST-36 Sludge Pump for removing rainwater from construction sites, cleaning up chemical spills, run-off clean-up, or any time you need to move liquid off a job site. Debris as large as 3/4 inch is able to pass through the casting and out your discharge hose. Based on clean water, this pump can move a ratio of 1:11, for example, if you"re using a 5 GPM pressure washer, you"ll move 55 GPM. This pump can move such a large amount of liquid in such a short time because the water flowing through the high-pressure nozzle creates a powerful venturi suction. All you need to do is attach a pressure line from a portable pressure washer.