pz-11 triplex mud pump connection rod pricelist

This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment"s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.

We know that cost savings on identical spare parts is important for offshore rig Companies today. Therefore we provide our services and spare parts at considerable cost reductions compared to sourcing from the major OEMs. Tratec can guarantee identical parts with all required part certificates. We maintaing the highest quality, using state-of-the art service facilities and experienced, specialist mud pump engineers for service work.

Tratec has supplied more than 20 mud pump spare part, overhaul and recertification projects the last 5 years. References include rig companies Odfjell Drilling, Maersk Drilling, Archer, Saipem, KCA Deutag, and others.

Tratec can supply overhaul and parts compatible with the following Mud Pump makers and trademarks: National Oilwell Varco (NOV), MHWirth, Continental Emsco, Gardner Denver, Lewco, Drillmec, and others. Tratec is an independent supplier of drilling equipment parts. Tratec is neither a licensee, nor is affiliated with any of the named original equipment manufacturers (OEM). The manufacturer’s names, equipment names, or trademarks used herein are solely for identification purposes, and are not intended by Tratec to cause confusion as to the source, sponsorship, or quality of the parts supplied by Tratec. The original equipment manufacturers named above and throughout this website do not sponsor, promote, warranty or endorse Tratec’s supply of parts.

MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITHGENUINE GARDNER DENVERPARTS AND SUPPORT SERVICESGardner Denver and OPI genuine pump parts aremanufactured to original tolerances and designed foroptimum dependability. Design and material innovations are the result of years of experience with hundredsof different pump applications. Reliability in materialsand quality assurance are incorporated in our genuinereplacement parts.

Your authorized Gardner Denver and OPI distributor offers all the backup youll need. A worldwide network of authorized distributors provides the finest product support in the pump industry.

Authorized distributor service technicians are factorytrained and skilled in pump maintenance and repair.They are ready to respond and assist you by providingfast, expert maintenance and repair services.

INSTRUCTIONS FOR ORDERING REPAIR PARTSWhen ordering parts, specify Pump MODEL andSERIAL NUMBER (see nameplate on unit). The SerialNumber is also stamped on top of the cylinder end of theframe (cradle area).All orders for Parts should be placed with the nearest authorized distributor.Where NOT specified, quantity of parts required perpump or unit is one (1); where more than one is required

per unit, quantity is indicated in parenthesis. SPECIFYEXACTLY THE NUMBER OF PARTS REQUIRED.DO NOT ORDER BY SETS OR GROUPS.To determine the Right Hand and Left Hand side of apump, stand at the power end and look toward the fluidend. Right Hand and Left Hand are indicated in parenthesis following the part name, i.e. (RH) & (LH), whenappropriate.

TABLE OF CONTENTSMaintain Pump Reliability and Performance with Genuine Gardner Denver Parts and Support Services . . . . . . . 1Instructions For Ordering Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Model PZL99D Option Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Frame & Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5Drive Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7General Service Fluid Cylinder & Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9High Pressure Service Fluid Cylinder & Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11SteelFitted Center Guided Valve (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12With Polyurethane Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12With Carboxylated Nitrile Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Full Opening Valve With Polyurethane Insert (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Piston Rod & Coupling (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Piston & Liner (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Piston Rod & Coupling (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Piston & Liner (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Piston Lubricating Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Oil Circulating Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Oil Pump & Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19Piston Lubricating Piping (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21Piston Lubricating Piping (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23Heat Exchanger Group (Optional Equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Valve Seat Puller (Optional Equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Gardner Denver Unit Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover

FRAME ASSEMBLY, Includes Reference Numbers 3 thru 9 . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STUD, Crosshead Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NUT, Crosshead Inspection Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUGMAGNETIC, Oil Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STUD, Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NUT, Hood Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Crosshead Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Crosshead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Crosshead Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEBEARING RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Bearing Retainer Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HOUSINGBEARING, Eccentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Bearing Cover Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEBEARING COVER (Rigid Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Bearing Cover Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE, Oil Level Sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGETEMPERATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BUSHINGPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SLIDECROSSHEAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Crosshead Slide to Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SEALFASTENER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LOCKNUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STUD, Spacer to Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KEY, Spacer to Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NUT, Spacer to Frame Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEBEARING COVER (Floating Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Hood to Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BREATHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Inpsection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Inspection Plate Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET, Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Inspection Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Piston Rod (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Piston Rod (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Piston Rod (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Piston Rod (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Piston Rod (General Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATEINSPECTION, Piston Rod (High Pressure Service) . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Hood to Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .***

Name of PartBEARING, Connecting Rod to Eccentric . . . . . . . . .RINGRETAINING, Connecting Rod Bearing . . . . .PLATERETAINING, Bearing to Eccentric . . . . . . .SCREW, Bearing to Eccentric . . . . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATERETAINING, Bearing to Connecting Rod .PLATERETAINING, Bearing to Connecting Rod .SCREW, Bearing to Connecting Rod . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BEARINGROLLER, Crosshead Pin . . . . . . . . . . . .PINLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SET SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CROSSHEAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PINCROSSHEAD . . . . . . . . . . . . . . . . . . . . . . . . . . .RINGRETAINING, Bearing . . . . . . . . . . . . . . . . . . .PLATERETAINER, Crosshead Pin . . . . . . . . . . . . .SCREW, Crosshead Pin Retainer . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RODEXTENSION . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Rod to Crosshead . . . . . . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLATERETAINER, Oil Stop Head to Frame . . . . .GASKET, Oil Stop Head . . . . . . . . . . . . . . . . . . . . . . .HEADOIL STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . .GASKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Oil Stop Head to Frame . . . . . . . . . . . . . . .SEAL, Oil Stop Head . . . . . . . . . . . . . . . . . . . . . . . . .RINGRETAINER, Oil Stop Head Seal . . . . . . . . . .SCREW, Seal Retainer to Oil Stop Head . . . . . . . . .BAFFLEROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTOR, For Rotating Shaft . . . . . . . . . . . . . . . . .SCREW, Adaptor to Shaft . . . . . . . . . . . . . . . . . . . . .

Name of PartCOUPLINGPLUNGER ASSEMBLY,Includes Reference Numbers 2 & 3 . . . .SCREW, Coupling . . . . . . . . . . . . . . . . . .LOCKNUT, Coupling Screw . . . . . . . . . .PISTON ROD, Includes ReferenceNumber 5 . . . . . . . . . . . . . . . . . . . . . . . . . .LOCKNUT . . . . . . . . . . . . . . . . . . . . . . . . .CLAMPLINER . . . . . . . . . . . . . . . . . . . . .GASKET, Liner to Cylinder . . . . . . . . . . .WRENCH . . . . . . . . . . . . . . . . . . . . . . . . . .*

Name of PartCOUPLINGPLUNGER ASSEMBLY,Includes Reference Numbers 2 & 3 . . . .SCREW, Coupling . . . . . . . . . . . . . . . . . .LOCKNUT, Coupling Screw . . . . . . . . . .PISTON ROD, Includes ReferenceNumber 7 . . . . . . . . . . . . . . . . . . . . . . . . . .PISTON ROD . . . . . . . . . . . . . . . . . . . . . .STUD, PISTON ROD . . . . . . . . . . . . . . . .LOCKNUT . . . . . . . . . . . . . . . . . . . . . . . . .CLAMPLINER . . . . . . . . . . . . . . . . . . . . .WRENCH . . . . . . . . . . . . . . . . . . . . . . . . . .*

OIL PUMP COMPLETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BALL BEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SHIM, Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ROTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SEAL, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PLUGHOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HOUSINGBEARING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SEAL, Bearing Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BEARINGROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VENT PLUGSUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VENT PLUGDISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER, Vent Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .* Not shown.

Name of PartSCREENOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PUMPOIL** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTOR, Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . .PLATE, Oil Pump to Frame . . . . . . . . . . . . . . . . . . . .SCREW, Adaptor to Frame . . . . . . . . . . . . . . . . . . . .BUSHINGHUB, Gear . . . . . . . . . . . . . . . . . . . . . . . .GEARDRIVEN, Oil Pump . . . . . . . . . . . . . . . . . . . .WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Pump Discharge to Filter)ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVELIQUID RELIEF . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIONSTRAIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FILTEROIL*** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Filter to Crosshead Spray)NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .REDUCERPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .CLAMP, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WASHER, Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Hose Clamp . . . . . . . . . . . . . . . . . . . . . . . . .*

SCREENOIL . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIONHAMMER, Wing . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . .PUMP PISTON LUBRICATING,**Includes Reference Number 13 . . . . . .KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Pump to Skid . . . . . . . . . . . . . . .LOCKWASHER, Pump to Skid . . . . . . . .WASHER, Pump to Skid . . . . . . . . . . . . . .SHEAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . .BUSHINGHUB . . . . . . . . . . . . . . . . . . . . .BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AUXILIARY SHEAVE ASSEMBLY . . . . .SET SCREW, Sheave . . . . . . . . . . . . . . . .

(Pump to Liner Group)ADAPTORHOSE . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . .REDUCERPIPE . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .***

SCREENOIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIONHAMMER, Wing . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .PUMP PISTON LUBRICATING,** IncludesReference Number 13 . . . . . . . . . . . . . . . . . . . . . .KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SCREW, Pump to Skid . . . . . . . . . . . . . . . . . . . . . . . .LOCKWASHER, Pump to Skid . . . . . . . . . . . . . . . . .WASHER, Pump to Skid . . . . . . . . . . . . . . . . . . . . . .SHEAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BUSHINGHUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AUXILIARY SHEAVE ASSEMBLY . . . . . . . . . . . . . .

(Pump to Liner Group)ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE ASSEMBLY . . . . . . . . . . . . . . .ADAPTORHOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . .REDUCERPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEEPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NIPPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TEEPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEAD (Not Included with 100E12 Puller) . . . . . . . . . . . . . .VALVE SEAT PULLER ASSEMBLY, Includes ReferenceNumbers 2 thru 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC JACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER STEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER STEM NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PULLER H BAR BASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CENTER BUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRAULIC PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE ADAPTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE COUPLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE COUPLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GAUGE 170 TON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CARRYING CASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .***

BAR, Valve Cover Tightening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PIN, Valve Cover Tightening Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HYDRILL DAMPENER (K105000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .HOSE, For Charging Hydrill Dampener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TOOL, Piston Rod Nut Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GDEP is the original creator of the drilling pump and continues to set the standard for durable, high-quality drilling pumps that can withstand the world’s toughest drilling environments. Starting with our PZ7 and rounding out with the market"s most popular pump, the PZ1600, our PZ Series of pumps are the perfect choice for today"s high-pressure drilling applications.

Mud Pump Spare Parts, Conumables, Shale Shaker Screen, Shale Shaker Tension Bolt, Shale Shaker Cushion Rubber, Reeling Pins, Mud Tank Flapper Pins, Safety Pins, Safety Pins for Wiper Rubber, Drill Rod Wiper, BOP Spares, BOP Ram, BOP Studs, High Tensile Stud Bolts for Oilfield, Flanges, Butterfly Valves, Gate Valves, Globeread more...

p-500 / 50, mb-10 swivel, , ch-500/ 400/ 320/ 125 / 50/ t-50 mud swivel . Cardwell -6 w/o rig , bhel-2000 / 150 t swivel, wash pipe (short & long – russian work over mud swivel), a-50 (short), wash pipe with snap ring , rubber packing set are ready stock.read more...

We are Authorized dealers for HAINUAO AO brand of mud pump spares which are compatible with mud pumps of EMSCO, GARDNER-DENEVER, NATIONAL OILWEL, IDECO, SKYTOP/BREWSTER, OPI WERTH WILSON and GASO and are an OEM replacement, approved by the API and are designed for the longest service.

Owing to the years of industrial experience, we have been able to serve our esteemed clients with a wide variety of Duplex Mud Pump Part. These parts of pumps are manufactured by our industry-experts using advanced machinery and premium quality material. Further, we check these parts on different parameters previous to theirread more...

Keeping in pace with the specific need of our customers, we are engaged in offering a wide series of Mud Pump Spare Parts. Our offered item is developed under the supervision of our skilled workers using finest quality basic material. This is well regarded among the clients due to its corrosion resistance, fine finish andread more...

Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for ODM Factory Pa Plastic Ball - ring valve – DONGYI, The product will supply to all over the world, such as: Turkmenistan, Slovakia, Macedonia, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don"t need to waste time shopping around.

300PZG839 EXTENSION ROD /200PZJ092 ROD CLAMP/50V14 PISTON ROD NUT /12BA19 bearing, crosshead pin/12BA18 bearing, Connecting rod to Eccentric/12W75 bearing, pinion shaft /12BA20 bearing, main

We export-orientated mud pump parts, including liners, pistons, piston inserts, valve inserts, oil seals, rod packing, fluid ends etc.. All of them meet or exceed DIN and API standards and have been exported to U.K., Germany, USA, Canada, Pakistan, Middle East, and so on.