raise rite mud pump price

Raise Rite Concrete Lifting can precisely return your concrete slabs to their original position and save you the cost of concrete replacement services.

Our crew works with a hydraulic mud pump, as well as a 14-inch concrete saw to cut joints that have stuck together and a gas-powered concrete drill for quick and easy work.

Mudjacking costs $3 to $6 per square foot, and foam jacking is $5 to $25 per square foot. The average cost of slabjacking to raise a concrete slab is between $511 and $1,790, with most spending $830. Concrete leveling prices depend on the size and condition of the slab and soil conditions.

The two main options to raise concrete are mudjacking and foam leveling. Each has considerable differences and is better suited for specific areas. Mudjacking requires larger holes drilled and costs $3 to $6 per square foot, while the stronger polyurethane foam runs $5 to $25 per square foot.

Mudjacking is a method of lifting a sunken concrete slab by pumping a mud-like mixture under the concrete to make it level again. Mudjacking, also known as "slab jacking" or "concrete leveling," is a quick and cost-effective way to level sinking concrete foundations, sidewalks, patios, and driveways.

The mudjacking process starts by strategically drilling holes 1” to 2” wide and injecting material to fill any voids under the slab, raising the sagging concrete within minutes. Mudjacking is eco-friendly, cures in 24 to 48-hours, and typically costs 25% to 50% less than concrete replacement.

Foam jacking, also known as "polyfoam" or "polyjacking," is a modern version of mudjacking that levels concrete slabs in a less invasive way. High-density polyurethane foam is injected into ⅝” holes that expand to lift and level the sunken concrete. Polyfoam is stronger and longer-lasting than traditional mudjacking.

Concrete leveling foam cures in 30 minutes, is mold and water-resistant, is not subject to erosion, and provides 6,000 to 14,000 lbs. per square foot of support. However, it"s more expensive than mudjacking.

Mudjacking costs $3 to $6 per square foot, while polyurethane foam jacking or PolyLevel runs $5 to $25 per square foot on average. Larger, thicker structures such as porches are more costly per square foot than simple slabs like sidewalks.

Mudjacking works for most situations, although the thick mud may not get into every crack, and the subsoil could sink again over time. One solution is to drill more holes, which increases the invasiveness and limits the effectiveness.

Mudjacking may not be the best option for load-bearing parts of the foundation or if your concrete is severely cracked. Consider using stronger polyfoam or an alternative repair option if:

Repairing a foundation with foam jacking costs $10,000 to $25,000 and up or from $5 and $25 per square foot, depending on the foam type and amount used. Leveling an uneven slab foundation with mudjacking costs $4,500 to $9,000, although mud pumping is weaker and less stable than foam.

Mudjacking a small section of a driveway costs $600 to $1,200 on average. The average cost to level an entire driveway is $1,400 to $2,700 for mudjacking, and between $3,000 and $7,000 for lifting with high-density polyurethane foam.

The average cost of mudjacking 2 to 4 sections of a garage floor is $300 to $900. Raising an entire 2-car garage floor costs $1,100 to $2,200 for mudjacking or between $2,500 and $5,400 for foam injection. Mudjacking a garage floor is cheaper than repouring new concrete or using a self-leveling compound.

Identifying the root cause that made the garage floor sink is vital. If you have a steep slope against the side of the garage where the subsoil has eroded, then you may need steel-jacking or structural foundation repairs with piers instead of mudjacking.

The average cost to level an 800-square-foot basement floor is $2,400 to $4,800 with mudjacking, or between $5,000 and $12,000 with foam jacking. Mudjacking a basement floor is advised for gaps of a few inches between the bottom of the walls and floor—where nails and insulation are visible.

The average cost to mudjack a concrete patio is $450 to $900, or from $3 to $6 per square foot depending on the extent of the damage. Raising a concrete patio slab costs about half as much a pouring a new concrete slab and only takes a few hours.

The average cost of mudjacking a 30" long sidewalk is $300 to $800, or about $50 per section. Sidewalk leveling next to trees, bushes, driveways, or patios costs more and takes extra time due to limited access. Empty voids under the walkway more than a couple of inches deep cost extra.

As long as contractors fix the underlying structural problems that caused the slab to sink, mudjacked sidewalks can last for 20 years. Mudjacking is advised against old walkways due to a higher risk of damage.

Mudjacking concrete steps costs $200 to $400 or about $300 to $800 for foam jacking a 20 to 40 square foot stoop. Mudjacking is typically half the price of completely replacing the steps.

Leveling concrete steps may require drilling through the surrounding slab and sidewalk areas. Otherwise, hydraulic levers raise the steps from the sides, and the slurry or foam is pumped in directly underneath.

Mudjacking a 400-square-foot pool deck costs $1,200 to $2,400 on average or between $2,800 to $6,000 when using concrete leveling foam. Poly foam is excellent for pool decks since it’s the best erosion and water-resistant material. Contractors should know that excessive fill materials in the wrong places could damage underground piping systems leading to the pool.

Any water drainage issues, lack of gutters, large trees, or plumbing leaks that caused the concrete to sink must be mitigated before mudjacking to ensure long term results.

Reputable mudjacking companies use an electronic elevation survey, or a Ground Penetrating Radar Scanning (GPR) system to inspect the subsoil and measure the cavity size before estimating and drilling. GPR provides a more accurate estimate and helps professionals avoid in-floor obstacles such as plumbing and wiring.

Mudjacking fill can contain cement, limestone, clay, or sand-based grout. The materials used dictate the weight-bearing capacity and longevity. Low-quality slurry that’s mostly mud and sand doesn"t last as long. Ask your contractor for a high-quality fill that maintains the concrete elevation longer.

Mudjacking fill contains water, which can cause the concrete slab to shift while curing. Once the mudjacking fill is fully dry, it contracts slightly, making it less stable than polyurethane lifting foam.

Heavy mudjacking fill material adds a burden to a poorly compacted subgrade, which can cause the slab to sink again. However, polyjacked slabs rarely sink again.

Sand pumping costs $3 to $7 per square foot or between $550 to $1,000 to level a 12" x 12" concrete driveway slab. Sandjacking costs about 50% less than installing a new slab. Sandjacking is a variation of mudjacking that uses dry limestone sand to lift concrete slabs.

Sandjacking is typically noninvasive and doesn"t require drilling holes through the slab if the fill can be pumped in from under the sides. Sandjacking is recommended in areas where the soil is often wet. The fill compacts more and allows for better drainage. Sandjacking has no curing time and is ready to use right away.

PolyLevel costs about $15 per square foot or around 30% to 40% more than standard mudjacking. PolyLevel is a patented, high-density polyurethane foam used for heavy-duty concrete stabilization projects like home foundation and driveway work. This polyfoam cures in as few as 30 minutes.

Mudjacking lasts 5 to 10 years on average, depending on the subsoil base below. PolyLevel foam doesn’t break down like mud fill and lasts much longer. Still, both mudjacking and polyjacking can sink without a stabilized subsoil. Contractors should work to prevent future subsoil erosion to increase longevity.

Mudjacking can lift between 6,000 and 14,000 pounds per square foot, depending on the type of foam used. These polyurethane foams are stronger than bedrock and provide more than enough support for most homes and slabs.

Mudjacking is used successfully to level foundations with a relatively noninvasive procedure. Mudjacking only requires several 1” to 2” holes to be drilled into the foundation without damaging the surrounding landscape. This technique costs half as much as removing and replacing your existing foundation.

The average concrete leveling project is completed in one day or less. Mudjacking a small concrete pad takes around 5 hours, and leveling a sunken basement takes about 30 hours. Mudjacking takes anywhere from a few hours to a few days to cure, depending on the project"s size.

Most insurance policies exclude coverage for mudjacking, foundation cracking, or a house sinking. Homeowner’s insurance typically covers foundation damage due to natural disasters or other issues such as plumbing. For new homes under warranty, the builder may be responsible for mudjacking expenses.

DIY concrete leveling projects are possible for concrete slabs 4 square feet or less. Anything larger requires an experienced contractor with mudjacking equipment. Concrete slabs of all sizes are extremely heavy. Without adequate weight-bearing equipment and careful preparation, you risk breaking the slab.

Concrete leveling foam kits cost $50 to $700 and are suitable for small concrete crack-filling repairs. This method is only a cosmetic solution and doesn’t raise or level the concrete. Foam kits are epoxy or polyurethane mixes that are applied with a caulking gun to hide the appearance of cracks.

Self-leveling concrete costs $1 to $5 per square foot if you install it yourself, which is about half the price of mudjacking. Only pour self-leveling cement on slabs that have sunken an inch or less, and avoid using it on basement floors.

Most areas don"t have mudjacking pump rentals available for the general public because local laws require a contractor’s license. New foam and mudjacking equipment costs $4,000 to $10,000. The mud slurry fill, power drills, and extension hoses are sold separately.

Polyjacking equipment generally has an extra heating component to warm the fill up to 90°F before sending it through the high-pressure pump that combines the poly-spray with a special hardening agent right inside the nozzle.

Mudjacking is an equipment-intensive project that requires a specialized professional. Be sure your contractor has up to date licensing, insurance, and bonding before signing a contract. Insurance is necessary to protect you accidental property damage or injuries that may occur.

Check their online reviews and experience. The best mudjacking companies have at least 5 years of experience with great reviews on HomeGuide and Google.

Don"t let contractors overcharge by purposely overestimating the amount of fill. They may not refund the balance if they use less filler. Polyurethane pumps have a gauge that tracks the amount of foam pumped. Check the gauge before they start and after they finish, and compare with the pricing in the contract.

We"re Raise-Rite Concrete Lifting and we"ve been raising sunken concrete in Carol Stream, IL for over 40 years. Family owned and operated, we speciali…

Manufacturer of concrete raising equipment & mud jacking & polyurethane accessories. Distributor of used equipment. Various products include pumps, trailers, hopper trucks, gun clamps & tips, insertion guns, breakers, hammers, drills, remote controls, bins, bits, compressors, extension cords, foam, generators, grease, hose, mixers, kits, O-rings, ports, hydraulic power-packs, ramps, reactors, rigs, electric saws, material screens, switches, tires, transmitters & workbenches. Made in USA.

HMI is proud of all its innovations and products, but perhaps the greatest innovation is the Quik Mix Pro automated volumetric hopper/mixer unit. The first fully automated unit rolled off the production line in March of 2003. This slabjacking unit, when mounted on a truck body, can carry a slab raising pump, dry material, cement, and water. Along with its unique twin shafted mixer, it can automatically mix and place material into the hopper of a pump. No shoveling is required!

Expanding beyond just the slabjacking industry, in 2008 HMI developed a revolutionary new Hydraulic Power Pack 10. With a new 2 in 1 design it offers 10,000 psi at 1 ½ gallons per minute, or 3,000 psi at 9 gallons per minute. Not only is the unit great as a seperate hydraulic power pack for running hydraulic tools (mixers and mudpumps), piering contractors can use it to install helical and resistance piers.

Hydraulic Mudpumps, Inc. is committed to future refinements and development to its product line. Our future will be determined by requests from you, our customer, and the upcoming industry demands.

Manufacturer of concrete raising equipment & mud jacking & polyurethane accessories. Distributor of used equipment. Various products include pumps, trailers, hopper trucks, gun clamps & tips, insertion guns, breakers, hammers, drills, remote controls, bins, bits, compressors, extension cords, foam, generators, grease, hose, mixers, kits, O-rings, ports, hydraulic power-packs, ramps, reactors, rigs, electric saws, material screens, switches, tires, transmitters & workbenches. Made in USA.

HMI is proud of all its innovations and products, but perhaps the greatest innovation is the Quik Mix Pro automated volumetric hopper/mixer unit. The first fully automated unit rolled off the production line in March of 2003. This slabjacking unit, when mounted on a truck body, can carry a slab raising pump, dry material, cement, and water. Along with its unique twin shafted mixer, it can automatically mix and place material into the hopper of a pump. No shoveling is required!

Expanding beyond just the slabjacking industry, in 2008 HMI developed a revolutionary new Hydraulic Power Pack 10. With a new 2 in 1 design it offers 10,000 psi at 1 ½ gallons per minute, or 3,000 psi at 9 gallons per minute. Not only is the unit great as a seperate hydraulic power pack for running hydraulic tools (mixers and mudpumps), piering contractors can use it to install helical and resistance piers.

Hydraulic Mudpumps, Inc. is committed to future refinements and development to its product line. Our future will be determined by requests from you, our customer, and the upcoming industry demands.

General InfoRaise-Rite Concrete Lifting of Carol Stream, IL, has been saving home owners, commercial customers and municipalities money since 1974. We offer concrete leveling services. The process is commonly known as either slabjacking or mudjacking and is a cost-effective alternative to replacing sunken concrete.

When we arrive, our team drills holes into existing concrete surfaces. Flowable cement grout is pushed beneath the concrete using hydraulic force to slowly return sunken concrete to its correct height. The holes are then patched and the area can be used again safely. If you have concrete that has sunken, causing dangerous unleveled cracks, restore it by calling the Raise-Rite team!

RaiseRite concrete lifting Wisconsin is a family-owned and operated business since 1974, RaiseRite has pumped over 100,000 tons of grout and millions of pounds of polyurethane, and gained the statewide recognition of Wisconsin’s premier polyurethane foam and mudjacking company for concrete repair.

Our primary emphasis remains on customer satisfaction. We are the only company in Wisconsin to offer you the choice between polyurethane and mudjacking concrete raising methods. Our experienced crews approach each foundation repair, concrete raising, and waterproofing job with the same high degree of professionalism and top quality service that made us what we are today.

For many years, we watched 3 slabs of cement, sink from the frost between our garages. We thought we would have to bust the concrete and start over which would have been costly and a hard job. then a friend told us about Raise-rite and it was a fraction of the cost and looks brand new. Bryan- Green Bay, WI

What types of problems can RaiseRite concrete raising fix? RaiseRite concrete raising is a fantastic alternative to replacing your concrete, often times saving you over 50% of the cost of replacement! Some common areas we raise, level and repair are patios, front porches, driveways, sidewalks, garage & parking slabs, steps, and pool decks. Benefits to raising concrete with polyurethane foam While there are many benefits to using Milwaukee concrete raising contractors who specialize in polyurethane concrete raising, here are a few that we find to be the most important:

RaiseRite is the only concrete raising company in Wisconsin that is an expert in, and offers both mudjacking and polyurethane concrete raising services, and has been recommended by satisfied customers for over 40 years!

A family-owned and operated business since 1974, RaiseRite has pumped over 100,000 tons of grout and millions of pounds of polyurethane and gained statewide recognition of Wisconsin’s premier polyurethane foam and mudjacking company for concrete repair.

Concrete raising, also referred to as concrete lifting, concrete leveling, slab jacking, mudjacking, and pressure grouting, is the process of raising your concrete slabs back to their original position. Often less than half the price of replacing concrete, it provides a cost-effective, time-effective and sustainable way to have your concrete be level once again. If your basement, factory floor, driveway or sidewalk concrete slabs are uneven and causing safety hazards, don’t hesitate to learn more about how concrete raising can help you.

No matter what  you want to call it, it is a process that involves leveling uneven concrete.  As concrete leveling professionals serving Windsor and Essex County, Dry-Rite confidently undertakes all types of residential and commercial slabjacking requests, even those that are causing leaks within your home or business.

Slabjacking is a an eco-friendly and economical alternative to replacement as it costs around half the price of a new sidewalk or driveway. Using the latest equipment available to raise sunken concrete, Dry-Rite promises a quick and non-disruptive job that won’t leave you with large sections of non-matching concrete.

Our slabjacking technique causes concrete to be pushed back up into the proper position through grout injection, creating a new foundation under the slab. The grout fills any holes or voids under the concrete and hydraulically raises the slab to the desired placement. The result is a smooth even surface.