sewage mud pump factory in stock

Distributor of non-clogging submersible centrifugal, motor grinder and wastewater submersible pumps. Grinder pumps are available in 1 to 3 phase, 1 to 10 hp motor and 1.25 to 3 in. discharge dia. Features vary depending upon model, including internal coatings, double mechanical/rotating/stationary seals, cutter impellers, casing covers, epoxy resin cable bases, auto-cut protection, multiple impeller design, epoxy coated surfaces, corrosion resistant radial cutters and cutter rings. Grinder pumps can be customized. Submersible centrifugal pumps are designed for use in deep sumps. Suitable for municipal, commercial, industrial, school, federal, wastewater drainage, state/local park and other applications. Most items available in stock.

Distributor of heavy duty submersible mud, sand, sludge & slurry pumps. Specifications of pumps include 5 hp to 30 hp motor, three phase, 208 V to 575 V, 6.8 A to 39 A, 3 in. to 6 in. NPT sizes, 38 ft. to 134 ft. head size & 475 gpm to 1,690 gpm flow rate. Features include impellers, wear plates & agitators made from abrasive resistant 28 percent chrome iron, process hardened ductile iron volutes casted with thick walls, class H motor insulation, double silicon carbide mechanical seals, heavy duty lip seal & stainless steel shaft & shaft sleeve. Sand, sludge & slurry pumps are used in mines, quarries, dredging, coal & ore slurries, sewage treatment plants & steel mills. UL listed. CSA approved. Meets OSHA standards.

We sell our commercial and residential pumps via an extensive distributor network. If you’re a contractor, you can purchase our products at well-known national industrial supply outlets like W.W. Grainger, Ferguson, and WinSupply. To find a distribution partner near you, visit our Distributor Search page and fill in your zip code. You can also check out the companies’ websites for additional information.

If you’re new to these systems, you may need assistance setting up and installing one of our pumps, and both contractors and product owners may need timely service on occasion. If you’re looking for a qualified installer for Zoeller pump products or need help with maintenance and repairs, you can find one quickly and easily by visiting our Service Locator page. We’ll direct you to a company that can respond to your needs.

If you ever need to replace worn or damaged pump parts, you can order what you need directly from us. Visit our Service Parts page, select the product and specific components you require, and complete the easy, convenient checkout process.

Feel free to contact us to learn more about our broad pump selection and service offerings. We can also help you find a distributor or service provider near you.

Agitator series submersible pump designed for slurry, mud & sand pumping with hard iron adjustable wear parts & bottom side discharge up to 6-inch size.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Trash pump with 2", 3" and 4" designs with Honda GX engine.

Constructed for maximum durability, our dewatering pumps are compact and lightweight, built with the contractor in mind. Centrifugal pump with 1", 2", 3" and 4" designs with Honda engine.

AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes: 2″, 3″ or 4″. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.

ANDRITZ wet installed sewage pumps from the SW series are a cost-effective solution for all types of sewage transportation. These channel impeller pumps are single-stage submersible sewage pumps with a pressure-water-tight motor and a closed-coupled design. They can be supplied for different types of installation and with various impeller types. They are also available in explosion-proof (ATEX) design. For more information on our wet installed sewage pumps from the SW series please have a look at our brochures in the sidebar or contact us directly.

American-made and built to last, our pumps and systems are available in a variety of sizes and configurations to meet the unique needs of any operation. With 40 worldwide issued or pending patents, Vaughan providescutting-edge pumps and pumping equipment across the globe.

Vaughan pumps and pumping equipment meet all requirements to receive federal aid under the Build America, Buy America (BABA) act. Our Vaughan team is dedicated to providing you with unrivaled support. Our extensive $10M inventory and surplus of spare parts ensure reliable quality and fast lead times.

BBA Pumps is not just a manufacturer and supplier; our employees have a tremendous amount of pump knowledge which they would like to share with you. You can contact us in 7 different languagesfor:

Submersible sewage pumps type ABS XFP are the best choice for ensuring efficient and reliable pumping in any wastewater pumping station. The submersible wastewater pumps, mainly installed in network pumping stations, are equipped with Premium Efficiency IE3 motors as standard and with the Contrablock Plus impellers. They are designed to process today"s wastewater mainly composed of less water due to low-flush toilets and a range of sanitary items such as wipes, fibre material, etc.

Sulzer offers one of the most comprehensive ranges of submersible pumps available on the market today. The applications extend from pumping of light and medium duty within residential and commercial properties to pumping of heavy duty with high concentration of rags and solids in municipal wastewater collection networks and in industrial wastewater applications.

Hydroman™ Submersible sewage sludge pump is used for civil and industrial non aggressive waste water, municipal works, industrial buildings, hotels, hospitals, civil air defense, mines etc., suitable for drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics. Especially effective in returning activated sludge in wastewater treatment works, temporary sewage bypass pumping and emptying polluted excavations or tanks, these units are robust in design and capable of delivering months of continuous operation with no maintenance requirements.

Hydroman has the proven experience and submersible pumps to provide reliable and efficient solutions for handling sludge,so we can offer a complete range of high-quality submersible sewage sludge pumpsmade for dewatering, moving mud, clay, sludge, light slurry, tank clean-outs, trench & pond cleaning, and mining applications.

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, that you need a heavy duty, high pressure submersible sludge pump. Capable of efficiently handling viscous fluids containing solids, Hydroman supplies range of submersible sludge pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications.

4.High efficient chrome steel impeller design with HRC 30~35 Rockwell Hardness, cast iron casing with heat treatment, chrome steel wear plate allow pump to stand abrasive and corrosive applications.