southwest mud pump module pricelist

The L-shaped two-piece fluid-end was adopted into the market over 35 years ago because it was an obvious improvement over one-piece modules. Since the suction module is separate from the discharge module, it is possible to replace the suction module when it wears out instead of replacing the entire fluid end.

Southwest’s L-shaped fluid-end is manufactured from heat-treated 4130 forgings and equipped with our quick-change valve cover system; our L-shaped modules offer unmatched performance.

The market demand for 7500 psi land drilling has continued to increase and is forecasted to remain strong as drillers and operators seek to complete wells more faster and more efficiently. Southwest Oilfield Products has the expertise and ability to convert existing 5000 psi pump systems with our 7500 psi fluid end upgrade. In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge cross/ strainer, and high-pressure discharge Mud Pump with Southwest L-Shaped Fluid End Modulesmanifold and 7500 psi pulsation dampener.

Updated performance data sheets that reflect the higher working pressures are provided for all upgrades performed by Southwest Oilfield Products. To ensure pump operation integrity, rod load limitations are strictly adhered to.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5¼ 5½ 5¾ 6 6¼ 6½ 6¾ 7 7 1/4 7 1/2 MAX-P.S.I. 5000 5000 5000 5000 4714 4313 3960 3650 3380 3130 2910 2713 2535 12”A-1700-PT 1700 150 G.P.R. 1.96 2.48 3.06 3.37 3.70 4.05 4.41 4.78 5.17 5.11 6.00 6.43 6.88 G.P.M. @ 150 R.P.M. 294 372 459 506 555 608 662 717 776 767 900 965 1032 MAX-P.S.I. 5000 5000 5000 5000 4714 4313 3960 3650 3380 3130 2910 2713 2535 10”A-1400-PT 1400 150 G.P.R. 1.63 2.07 2.55 2.81 3.09 3.37 3.67 3.98 4.31 4.65 5.00 5.36 5.74 G.P.M. @ 150 R.P.M. 245 311 383 422 464 506 551 597 647 698 750 804 861

BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY FLUID END TYPE MODEL OF PUMP SIZE OF PUMP OEM 5000 PSI OILWELL A-1700-PT / A-1400-PT 7-1/2” X 12” / 10”

ITEM QTY. NO. PART NO. DESCRIPTION REQ’D 1 1388YXX LINER REFER TO GUIDE TO ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX) 3 2 2974-XX LINER GASKET (REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX) 3 3 8488-4 WEARPLATE 3 4 2974-1 WEARPLATE GASKET (ALSO AVAILABLE IN URETHANE P# 2974-1U) 3 5 XX-BYY PISTON (REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY) 3 5A 2932 PISTON BUSHING (FROM 1-5/8” TO 1-1/2” STRAIGHT BORE) 3 6 568-225 PISTON SEAL 3 7 1290HW-25 PISTON ROD (WITH 1 ½-8 ELASTIC STOP NUT) 3 8 API-4ESN PISTON ROD NUT 3 9 1290W2 PISTON ROD CONNECTING STUD (WITH WATER HOLE) 3 10 1290HW1 SUB ROD 3 11 1290CW ROD CLAMP (WITH WATER JACKET) 3 11A 1200H30 HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS) 3 11B 1200120 PIPE (3/8” X 12” GALVANIZED AND THREADED ON ONE END) 3 11C 4018-94 BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER) 6 12 1200G90 PONY ROD 3 13 SEE PAGE VALVE COMPLETE 6 14 SEE PAGE VALVE INSERT 6 15 SEE PAGE VALVE SPRING 6 16 SEE PAGE VALVE SEAT 6 SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG) 1 4475-3A SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 17-24) 17 4475 VALVE COVER FLANGE 1 18 4575 SCREW GLAND 1 19 4675-3A PLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 21, 22, & 23 1 20 P129 HP VALVE COVER PLUG NITRILE SEAL (ALSO AVAILABLE IN URETHANE SEAL USE P# P129U) 1 21 4775-3R VALVE GUIDE (COMPLETE WITH BUSHING #4700I) 1 22 4700I VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE P# 4700IU) 1 23 4016-99 VALVE GUIDE SCREW 2 24 4015-2 VALVE COVER STUD (WITH SW PART# HHN1250-7 1 ¼-7 HEAVY HEX NUT) 12 OILWELL VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 22, AND ITEMS 25-28) 25 80500003 VALVE COVER 1 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP OEM 5000 PSI OILWELL A-1700-PT / A-1400-PT 7-1/2” X 12” / 10”

ITEM QTY. NO. PART NO. DESCRIPTION REQ’D 26 80400003 VALVE GUIDE 1 27 80432236 VALVE GUIDE CAPSCREW 2 28 AJO229R VALVE COVER GASKET 1 29 4016-76 POWER END STUD (WITH SW PART# HHN1750-8 1 ¾-8 HEAVY HEX NUT) 12 30 80381003 LINER ADAPTER SLEEVE (STEEL) (ALSO AVAILABLE IN BRONZE PART# 80381003B) 3 31 6588-4 LINER ADAPTER NUT 3 31A 80067236 LINER ADAPTER SET SCREW 9 32 4018-70 SUCTION MANIFOLD CAPSCREW (WITH LOCKWASHER) 24 33 8588-50A SUCTION MANIFOLD 1 34 80102003 SUCTION MANIFOLD GASKET 3 35 8488-51D DISCHARGE MODULE 1 36 8488-52S SUCTION MODULE 1 37 8388A DISCHARGE MANIFOLD 1 38 568-345 DISCHARGE MANIFOLD GASKET 3 39 4017-2 DISCHARGE MANIFOLD STUD (WITH SW PART# HHN1375-8 1 3/8-8 HEAVY HEX NUT) 12 40 9070017 PONY ROD SEAL 41 9060023 PONY ROD BAFFLE

NOTE: DUAL-DURO® AND GRAYLOY® ARE REGISTERED TRADEMARKS OF SOUTHWEST® OILFIELD PRODUCTS. VALVES & SEATS (OEM OILWELL A-1700-PT/ A-1400-PT) STAINLESS PULLER HEAD TYPE VALVE INSERT SPRING SEAT PULLER HEAD SPRING STYLE SOUTHWEST (Full Open) 777-8B N/A 941 N/A 877-7 SWTM4250 SPLIT JAW SWTM40-SN SPLIT JAW FULL OPEN-ROUGHNECK SWND-7V2 N/A SW5710-115L N/A SWND-7S1 SWND-7PH PANCAKE FULL OPEN-ROUGHNECK SWTM40-SN SPLIT JAW SWND-7V2H N/A SW5710-115L N/A SWND-7S1 (High Temp) SWND-7PH PANCAKE FULL OPEN-ROUGHNECK SWTM40-SN SPLIT JAW SWND-7V1 SWND-7I SW5710-115L N/A SWND-7S1 (w/Replaceable Urethane Insert) SWND-7PH PANCAKE3 WEB DOUBLE ANGLE O-RING SWR0500110 SWR0514275 SWR0513744 SWR0514790 SWR0509309 SWTM3-7T 3 WEB (High Temp) SWR0520502 SWR0520501 SWR0513744 SWR0514790 SWR0509309 SWTM3-7T 3 J HOOK 3 WEB STANDARD PLATE SWR0505062 SWR0504893 SWR0513937 SWR0514423 SWR0509309 SWTM3-7T 4 WEB SWU5C-EEF SWUDD-7B SW5710-110 N/A SW7DD-B1 SWTM4-7 4 J HOOK 4 WEB (High Temp) SWU5C-EEFHT SWUDD-7BHT SW5710-110 N/A SW7DD-B1 SWTM4-7

: R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series

PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque

Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll

01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50

Medium Pressure Diaphragm Pumps Installation, Operation, Repair, and Parts Manual Description Form L-1382 (10/15, Rev. D) California Proposition 65 Warning -- This product and related accessories contain

www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover

GARDNER DENVER 3-1-541 Rev D April, 2005 HD-2250 WELL SERVICE PUMP POWER END PARTS LIST ECN 1025185 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES Gardner

INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles

MUD PUMP EXPENDABLES Oilman Building 1020, ZOBON-MOHO business park, 999# Wangqiao Road, Pudong Shanghai,P.R.Of China Tel:+86-21-5880680 Fax:+86-1-5880690 Email: sales@oilmangroup.com Http://oilmangroup.com

SUNNDA CORPORATION Boost Your Bottom Line! Mud Pump Parts & Expendables Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com

Pump ED 101 Positive Displacement Pumps Part I Reciprocating Pumps Joe Evans, Ph.D http://www.pumped101.com There are many pump designs that fall into the positive displacement category but, for the most

Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES

BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped

Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid

APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset

Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator

Operations & Maintenance Manual Weatherford MP10 Mud Pump Model MP10 Triplex Mud Pump The Weatherford Model MP10 is a single acting triplex mud pump rated for 1000 HP in oilfield drilling applications.

OP300S / OP350 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION Copyright 2013 International Pump Manufacturing, Inc. This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Read and

Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.

Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022

Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR

OP232-INST 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION IPM INC. Manufactured by International Pump Manufacturing, Inc. Covers models: OP232C, OP242CD and OP242A. Manual Number: MOP232062008

Always place the pump as close to the liquid to be pumped as possible. Keep the suction line short and with few bends. Keep the pump and engine on a level foundation. A poor foundation and a heavy suction

PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model

Premium"s high-strength, triple reduction, forged steel triplex fluid end modules are made from 4130 alloy steel, heat treated for a long working life, machined to perfection and packaged for delivery with anti-corrosion protection. The precision-made jewelry, like the exterior finish, reflects the superior quality inside.

The market demand for 7500 psi land drilling has continued to increase and forecasted to remain strong as drillers and operators seek to complete wells more faster and more efficiently. Premium has the expertise and ability to convert existing 5000 psi pump systems with our 7500 psi fluid end upgrade. In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge cross/ strainer, high-pressure discharge manifold and 7500 psi pulsation dampener.

Direct replacement for the current 7500 psi wide body module (same outside dimensions and same external and internal components except valve cover, bore seal and Falcon spring retainer)

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,