southwest mud pump modules pricelist

The L-shaped two-piece fluid-end was adopted into the market over 35 years ago because it was an obvious improvement over one-piece modules. Since the suction module is separate from the discharge module, it is possible to replace the suction module when it wears out instead of replacing the entire fluid end.

Southwest’s L-shaped fluid-end is manufactured from heat-treated 4130 forgings and equipped with our quick-change valve cover system; our L-shaped modules offer unmatched performance.

The market demand for 7500 psi land drilling has continued to increase and is forecasted to remain strong as drillers and operators seek to complete wells more faster and more efficiently. Southwest Oilfield Products has the expertise and ability to convert existing 5000 psi pump systems with our 7500 psi fluid end upgrade. In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge cross/ strainer, and high-pressure discharge Mud Pump with Southwest L-Shaped Fluid End Modulesmanifold and 7500 psi pulsation dampener.

Updated performance data sheets that reflect the higher working pressures are provided for all upgrades performed by Southwest Oilfield Products. To ensure pump operation integrity, rod load limitations are strictly adhered to.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

You are viewing three (3) fully reconditioned National Oilwell 12P160 Triplex Mud Pumps for sale by Pickett Oilfield, LLC. These National 12-P-160 Mud Pumps are Rebuilt and Ready to go to work.

Some refurbishments include: Fully reconditioned mud pump assembly. Pinion shaft assembly complete with new SKF bearings and new seals. Pump internals painted with Oil Resistant 2 Part epoxy Jotun Tank guard. MPI inspection of all critical areas of pump frame. MPI of all load path components of Crankshaft and Pinion shaft assemblies, and all new Southwest Premium “L” Shape 6,000 psi Fluid End Modules. A full Data Pack with all dimensional control & MPI reports will be furnished.

Warranty on National 12-P-160 Triplex Mud Pumps: All new parts fitted come with a 12 month warranty or such as offered by the part manufacturer; The refurbished GE-752 traction motors come with an 18 month warranty.

Pickett Oilfield, LLC offers prospective buyers an extensive selection of quality new, used, and refurbished Oilfield Drilling Equipment at competitive prices, including Triplex Mud pumps.

Double speed is a leading manufacturer and supplier of mud pump parts to the oil drilling industry. Our specialties include, but are not limited to, expendables for mud pump systems including Emsco, Brewster, National Oilwell, Ideco, Gardner Denver, Weatherford, Drillmec, Bomco, Honghua, RG, Rongsheng, TSC, LS NOV, POT, Bentec, Wirth, Southwest, Ewco, Lewco, Baker Forum, Mud King, OPI, Texma, and more. We also have extensive knowledge of older and obsolete mud pumps and their parts. Our reach extends to customers around the world.

Double speed has a long tradition of industry leadership and innovation. We continue to expand our product line and services to meet emerging customer needs. Our broad range of capabilities includes creating new, more efficient parts to ensure our customers achieve the highest performance in the most demanding mud pump operations.

The extensive product lines of mud pump expendables we manufacture and supply include liners, modules and accessories, 7,500 PSI conversion kit, pistons and hubs, valves and seats, rods and clamps, gaskets and seals, crossheads, crosshead slides and crosshead pins, manifolds, pulsation dampeners and much more. All our products are fully exchangeable with OEM parts.

The mud pump expendables and mud pump parts we manufacture and supply meet or exceed OEM specifications and API standards. Our manufacturing facility is ISO9001 registered and API-7K certified.

Premium"s high-strength, triple reduction, forged steel triplex fluid end modules are made from 4130 alloy steel, heat treated for a long working life, machined to perfection and packaged for delivery with anti-corrosion protection. The precision-made jewelry, like the exterior finish, reflects the superior quality inside.

The market demand for 7500 psi land drilling has continued to increase and forecasted to remain strong as drillers and operators seek to complete wells more faster and more efficiently. Premium has the expertise and ability to convert existing 5000 psi pump systems with our 7500 psi fluid end upgrade. In addition to replacing the existing valve-over-valve module with our proven L-Shaped design, a typical conversion also includes an upgraded liner retainer system, discharge cross/ strainer, high-pressure discharge manifold and 7500 psi pulsation dampener.

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5¼ 5½ 5¾ 6 6¼ 6½ 6¾ 7 7 1/4 7 1/2 MAX-P.S.I. 5000 5000 5000 5000 4714 4313 3960 3650 3380 3130 2910 2713 2535 12”A-1700-PT 1700 150 G.P.R. 1.96 2.48 3.06 3.37 3.70 4.05 4.41 4.78 5.17 5.11 6.00 6.43 6.88 G.P.M. @ 150 R.P.M. 294 372 459 506 555 608 662 717 776 767 900 965 1032 MAX-P.S.I. 5000 5000 5000 5000 4714 4313 3960 3650 3380 3130 2910 2713 2535 10”A-1400-PT 1400 150 G.P.R. 1.63 2.07 2.55 2.81 3.09 3.37 3.67 3.98 4.31 4.65 5.00 5.36 5.74 G.P.M. @ 150 R.P.M. 245 311 383 422 464 506 551 597 647 698 750 804 861

BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY FLUID END TYPE MODEL OF PUMP SIZE OF PUMP OEM 5000 PSI OILWELL A-1700-PT / A-1400-PT 7-1/2” X 12” / 10”

ITEM QTY. NO. PART NO. DESCRIPTION REQ’D 1 1388YXX LINER REFER TO GUIDE TO ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX) 3 2 2974-XX LINER GASKET (REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX) 3 3 8488-4 WEARPLATE 3 4 2974-1 WEARPLATE GASKET (ALSO AVAILABLE IN URETHANE P# 2974-1U) 3 5 XX-BYY PISTON (REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY) 3 5A 2932 PISTON BUSHING (FROM 1-5/8” TO 1-1/2” STRAIGHT BORE) 3 6 568-225 PISTON SEAL 3 7 1290HW-25 PISTON ROD (WITH 1 ½-8 ELASTIC STOP NUT) 3 8 API-4ESN PISTON ROD NUT 3 9 1290W2 PISTON ROD CONNECTING STUD (WITH WATER HOLE) 3 10 1290HW1 SUB ROD 3 11 1290CW ROD CLAMP (WITH WATER JACKET) 3 11A 1200H30 HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS) 3 11B 1200120 PIPE (3/8” X 12” GALVANIZED AND THREADED ON ONE END) 3 11C 4018-94 BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER) 6 12 1200G90 PONY ROD 3 13 SEE PAGE VALVE COMPLETE 6 14 SEE PAGE VALVE INSERT 6 15 SEE PAGE VALVE SPRING 6 16 SEE PAGE VALVE SEAT 6 SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG) 1 4475-3A SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 17-24) 17 4475 VALVE COVER FLANGE 1 18 4575 SCREW GLAND 1 19 4675-3A PLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 21, 22, & 23 1 20 P129 HP VALVE COVER PLUG NITRILE SEAL (ALSO AVAILABLE IN URETHANE SEAL USE P# P129U) 1 21 4775-3R VALVE GUIDE (COMPLETE WITH BUSHING #4700I) 1 22 4700I VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE P# 4700IU) 1 23 4016-99 VALVE GUIDE SCREW 2 24 4015-2 VALVE COVER STUD (WITH SW PART# HHN1250-7 1 ¼-7 HEAVY HEX NUT) 12 OILWELL VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 22, AND ITEMS 25-28) 25 80500003 VALVE COVER 1 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP OEM 5000 PSI OILWELL A-1700-PT / A-1400-PT 7-1/2” X 12” / 10”

NOTE: DUAL-DURO® AND GRAYLOY® ARE REGISTERED TRADEMARKS OF SOUTHWEST® OILFIELD PRODUCTS. VALVES & SEATS (OEM OILWELL A-1700-PT/ A-1400-PT) STAINLESS PULLER HEAD TYPE VALVE INSERT SPRING SEAT PULLER HEAD SPRING STYLE SOUTHWEST (Full Open) 777-8B N/A 941 N/A 877-7 SWTM4250 SPLIT JAW SWTM40-SN SPLIT JAW FULL OPEN-ROUGHNECK SWND-7V2 N/A SW5710-115L N/A SWND-7S1 SWND-7PH PANCAKE FULL OPEN-ROUGHNECK SWTM40-SN SPLIT JAW SWND-7V2H N/A SW5710-115L N/A SWND-7S1 (High Temp) SWND-7PH PANCAKE FULL OPEN-ROUGHNECK SWTM40-SN SPLIT JAW SWND-7V1 SWND-7I SW5710-115L N/A SWND-7S1 (w/Replaceable Urethane Insert) SWND-7PH PANCAKE3 WEB DOUBLE ANGLE O-RING SWR0500110 SWR0514275 SWR0513744 SWR0514790 SWR0509309 SWTM3-7T 3 WEB (High Temp) SWR0520502 SWR0520501 SWR0513744 SWR0514790 SWR0509309 SWTM3-7T 3 J HOOK 3 WEB STANDARD PLATE SWR0505062 SWR0504893 SWR0513937 SWR0514423 SWR0509309 SWTM3-7T 4 WEB SWU5C-EEF SWUDD-7B SW5710-110 N/A SW7DD-B1 SWTM4-7 4 J HOOK 4 WEB (High Temp) SWU5C-EEFHT SWUDD-7BHT SW5710-110 N/A SW7DD-B1 SWTM4-7