strokes per minute mud pump supplier

Crown"s One Pump Stroke Counter System monitors and displays strokes per minute and total stokes and has everything you need to monitor one mud pump. Encased in a stainless steel box, the LCD screens are easy to view at a distance, and with buttons mounted on the face place, this system is easy to reset as needed. With a low power, low voltage lithium battery, this system is self-contained and intrinsically safe, with a operational life of 5 years. The Crown One Pump Stroke Counter system is designed to work in the harshest industry conditions and is waterproof and resistant to excessive rig vibrations. With everything ready-to-use right out of the box, this system will get you counting mud pump flow rate quickly and efficiently. Here"s what you"ll get in the one pump stroke counter system:

Made in the US, the Crown One Pump Stroke Counter system is powered by a 3.6 Type D lithium battery, with no external power supply needed. Because it is a self-contained system, the CPS101-2 is intrinsically safe. When the system is not in use it will go into a null state, saving battery power and the life of the LCD screens. Each Screen displays either strokes per minute (0-240 SPM) or total strokes (0-9999).

Crown"s limit switch assembly can be mounted near the mud pump piston with the easy-to-use c-clamp. The stainless steel rod can be bent to reach the piston easily,  making the CPS101-2 one pump stroke counter system mountable in optimal proximity to the pump piston. The cable connecting the limit switch assembly to the stroke counter is made of the most durable materials to give you the best possible stroke counter on the market.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

F 500 mud pump for oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling.

F 500 mud pumps have a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of mud pump fluid end parts greatly.

Sales and services for weight indicators, electronic weight indicators, cement recorders, six inch gauges, cylinders, torque assemblies, line pull assemblies, 1502 assemblies, wireline gauges and cylinders, depthometers, electronic depth systems, counters, diaphragms, auto drilling systems, rotary torque systems, and pump stroke counters.

The 12-P-160 is rated @ 1,600 input horsepower (1,193 kW) at 120 strokes per minute with a 12 inch (304 mm) stroke. Multiple liner sizes allow pressure and volume to handle circulation in deep drilling applications.

Poor Boy"s Instrument, Inc."s Digital Pump Stroke Counter System monitors and displays the number of strokes and stroke rate for mud pumps. The system is available in (1) pump, (2) pump or (3) pump configurations. The digital counter uses LCD displays to indicate, both the total number of strokes on each pump and the strokes per minute on each pump. Push buttons located on the front of the head make it easy for the operator to reset each pump count. A stainless steel enclosure ensures reliable service even in the most severe operating environments. Complete system includes Digital stroke counter, head mounted in stainless steel enclosure, cable assemblies with connectors, and stroke counter switch with mounting clamp.

Poor Boy�s Instrument, Inc.�s Proximity Detection System eliminates the need for belt-driven generators on RPM and SPM systems. The system uses reliable and durable proximity sensors which are mounted permanently on the mud pump for the SPM and near the rotary table for the RPM. The signal received from the sensor is processed into an output signal in the form of a pulse signal or analog signal for operation of electric meters, digital pump stroke counters, recorders, etc. Standard configuration can supply signal for (2) SPM functions, and (1) RPM function (other configurations available). The system includes a tough NEMA 4 enclosure which houses the modules and processors, cable assemblies with connectors for (3) functions, and (3) proximity detection sensors. Output cables and meters are optional with system.

To request a quote for one of our Digital Pump Stroke Counter Systems please click here or send an email which includes the options that meet the needs for you installation to sales@poorboysinstrument.com. Please do not send any non-public personal information. Please allow two business days for a response.

Diesel Mud pumps (temporally not available due to lack of engines 12/1/22) features 2-stage, 44 to 1 gear reduction with a large diameter output gear and heavy duty ball bearing construction. Often referred to as Mud pumps or Sludge pumps, diaphragm trash pumps are designed to pump mud, slurry, sewage, and thick liquids that have the ability to flow. Hatz Diesel engine 1B20.

Built-in molded polyurethane flapper/check valve assures self-priming to 20 feet after initial prime. Heavy duty gear box is designed to operate pumps at 40 strokes per minute for electric motor. Each unit includes a 3" NPT steel suction strainer, two 3" NPT nipples, and wheel kit with 10" semi-pneumatic transport wheels for portability. Pumps are designed for use with non-flammable liquids which are compatible with pump component materials. Suction and discharge port size cannot be reduced.

Suction and discharge port size cannot be reduced. Due to positive pumping action of diaphragm pumps, by all mfr"s, the discharge is recommended to only be 25FT long unless oversized. Discharge can not be restricted. There is no relief valve.

Bentec completely redeveloped the concept of Mud Pumps. Being equipped with a direct-driven gearbox, an own developed motor, and a state-of-the-art pump housing, there is no need for an internal gear coming with many disadvantages and no more belt tensioning.

Bentec Mud Pumps are light weight and have a small footprint. The AC-powered motor is top or rear mounted – suitable for any drilling rig arrangement. The pump is available with 5 000 or 7 500 psi fluid ends, and all its parts that are subject to wear and tear meet API standards and are available worldwide.

A handling crane makes it easy to handle the fluid end components. Furthermore, Bentec uses a patented liner and valve clamping technology to reduce the maintenance time significantly. A quick-change liner and piston system serves for easy maintenance. A special feature of the Bentec MUD PUMP is the side-mounted gear drive.

This design eliminates the need for chain or belt tensioning systems. The two-stage helical gear feeds directly into a forged/welded crankshaft, which is balanced and provides quiet and vibration-reduced operation.

Liner cooling and gear oiler systems are included; a supercharge pump and a noise reduction package can be installed upon request. The Bentec MUD PUMP is the right choice especially when it comes to noise-sensitive environments such offshore or densely populated environments.

Beyond the supply of Mud Pumps, Bentec acts as system supplier. The pumps can be delivered together with a Bentec Power Control System and a Bentec Soft Pump System.

​Monitors and displays number of strokes and stroke rate for Three mud pumps The Pump Stroke Counter/Rate Meter displays both the total number of strokes and the strokes per minute for 3 mud pumps up to 1,024 strokes per minute for each pump. Push buttons conveniently located on the front of the instrument make it easy for the operator to reset each pump count

NOV 12-P-160 Mud Pump is rated at 1600 input horsepower (1193 kw) at 120 strokes per minute, with a 12-inch (304.8 mm) stroke. Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.

Flexibility: Compact engineering provides higher efficiency in less space. The NOV 12-P-160 Triplex Mud Pump light weight and flexible design make it easily adaptable to a variety of rig configurations. This provides flexibility as drilling requirements and conditions change.

Fluid End Modules: NOV offers a choice of fluid end modules and valve covers for every P Series pump model to select the fluid end module that exactly matches drilling requirements. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules

Measure and display the frequency of pump strokes of pump 1,and pump 2 and pump 3 by changing-over through the push- button of“select” on the panel.

Goldenman Petroleum Equipment Co.,Limited had explored the international market and enlarged international cooperation 10 years .Due to the competitive price ,good quality and excellent service ,our products are sold to America,Canada,Brazil,Columbia, Venezuela,India,Iran,UAE,Russia ,Kazakhastan,Italy,Hungary ,Australia,Syria,Egypt ,etc .and get good reputation from our overseaclients .