submersible mud pump factories pricelist

Submersible Electric pumps are typically used in applications for storm water drainage, flood control, irrigation, and final effluent pumping. Our Submersible Electric pumps are available in sizes ranging from 8″ to 60″ diameter and are available in numerous configurations

Submersible pump required is to pump out water about 4 feet. Its hose length is 50 meter and it is using to pump sea water from engine room back to ocean.

Modo Pump has been focused on submersible mud pump manufacturing and selling for many years, which is known as a professional manufacturer and supplier of various quality pumps in China. We have gathered many professional and experienced staff, as well as advanced equipment in our factory. Welcome to buy our submersible mud pump and check the price list with us.

The crank gear and connecting rods drive a rotary movement that is transferred by the motor transmission. The pressure is produced by the piston in the cylinder due to which the mud is sucked. Following the operation, the suction valve is closed when it moves to left. As the pressure increase in the pipeline, the valve is forced to open and mud is released.

In accordance with the operating liquid displacer type being incorporated, the pumps are subdivided into piston units and plunger-type units. The liquid discharge uniformity is independent of head. The pumping plants are used actively for the processes with the liquids containing solid inclusions in high amounts. Incorporating the self-suction function in piston unit, the liquid is sucked and discharged twice in mud pumps during the single shaft turn, making themselves the double-action pumps whereas, the mud plunger pumps are single-action pumps where the liquid is sucked and discharged only once during a shaft turn.

The single direct-action three-piston pumps prove to be better than other types of drilling. These pumps demonstrate much more uniformity in mud delivery, lesser weight, and easy mounting when compared with two-cylinder units.

Depending on the number of cylinders, the pumping plants are classified into the following categories, single-cylinder, double-cylinder, three-cylinder and multi-cylinder pumping plants. These cylinders may be vertical or horizontal. Comparatively, the multi-cylinder pumping plants will cost higher but don’t feature any significant advantages other than the single-cylinder.

When drilling, there might occur the necessity of mud pumping out- and flushing-out, so there are various types of pumps available for such operations which are required to be installed on drilling rigs.

Sucker-rod pumps: In sucker-rod pumps, the pumpjack is a driver. This pump is installed at the bottom of the well. The reciprocating movements of the pumpjack are converted into liquid flow by the pump, which results in delivery of liquid on the surface. These pumps move oil with various admixtures demonstrating high level of capacity.

Screw pumps:The screw pumps are small-sized and are generally used to deliver mud into a centrifuge. These pumps have the rotor and stator as the major structural components and the material used to manufacture these components suit right for smooth pumping of liquids with solid inclusions and high level of viscosity. The pumped liquid flows with stable pressure, shaft slowly and the flow is free of vortexes. These pumps comparatively require minimum service.

Well pumps: These pumps are submerged into wells. The ground part of the plant is a transformer substation equipped for start and adjustment. The pump has a vertical structure, with a fixed cylinder and single-action. A plunger and valve are moving parts. The pumped liquid may contain water content of up to 99% at the temperature as high as 130ºC.

All the mud pumps have few general advantages that include the capability to process liquids and substances with high level of viscosity and with admixtures. Also, enabling the smooth flow of substances, free of pulsations or suspensions mixing are counted under the major advantages of incorporating mud pumps. The pumps have high suction power and small weight, easing out the transportation and installation at remote oil fields. They are highly reliable and also affordable.

There are various types of mud pumps available for different purposes. So, it is important to incorporate the right one for your purpose. A Professional help in getting the right mud pump would be a good and safe option.

The DAE Pumps Submersible Drainage Pumps support a variety of dewatering applications. Their robust design provides the highest level of performance, reliability, and ease of use. The submersible drainage pumps offer a range of sizes up to 10-inches with over 80 HP and a volume capability of pumping as much as 6100 GPM.

Submersible Sludge Pumps are peak performers in pumping thick mud, clay, and waste. These energy-efficient pumps run at low horsepower, pumping as much as 420 GPM. Available in 3-inch and 4-inch sizes, the heavy-duty DAE Pumps Submersible Sludge Pumps are capable of moving abrasive solids as large as 2-inches. Our Submersible Sludge Pumps provide the support you need for for your toughest jobs.

The DAE Pumps Submersible Slurry Pumps are the toughest and most durable submersible pump. Built for pumping the worst slurry and materials, these pumps have the highest rating in ruggedness. Our Submersible Slurry Pumps are made for dredging the most abrasive media with high solid content in quarries and mining operations. With up to 102 horsepower, these powerful unit are capable of moving 2112 GPM of solids as large as 2.5-inches, and are available in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

The DAE Pumps Payload Electric Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Payload Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

The DAE Pumps Hydraulic Submersible Slurry Pumps are the industry’s best-performing hydraulic submersible pumps. Capable of pumping up to 1325 GPM our hydraulic pumps provide the reliability you need. Because these 3-inch and 4-inch pumps are compact, their lightweight design makes them necessary tools for all site operations. They are non-clogging and are also available in a high head performance of up to 350 feet

The DAE Pumps Hauler Hydraulic Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Hauler Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

DAE Pumps is committed to providing you with the highest quality of pumps at affordable prices. We build our submersible pumps with you in mind. We use the strongest material inside and out to withstand the harshest conditions for getting the job done. Over the years, we built a modular platform of submersible pump that allows us to provide the highest performing pump with the same durability and reliability from one size and power to the next. This means you get the best pump each time.

Our low-cost submersible pump lines are an extension of our commitment to affordably priced pumps. These pumps are built with the same types of metal inside and out as our modular lines, but use a different technology design that brings the performance of these pumps close to those of the other models. We offer these pumps with a lower guarantee so you can get very high-grade pumps at the best prices.

Submersible pumps are the industry’s most durable pumps for underwater operations moving solids and liquids. They can withstanding everyday use of processing water, rocks, sand, mud, sludge, slurry, and other abrasive materials. DAE Pumps provides a variety of submersible pumps for mining, dredging, minerals processing, ash pumping, wastewater, dewatering, and pumping chemicals, oil, sludge, paste, and many other applications. We offer light-duty to heavy-duty submersible drainage pumps, submersible sludge pumps, and submersible slurry pumps.

The submersible drainage pump is built for general dewatering, groundwater, raw water, and construction site use. Construction companies and various municipalities use drainage pumps for removing water from heavily flooded areas and as sump pumps when rainwater or groundwater collects in low-lying and below ground work areas.

DAE Pumps drainage pumps are designed for flexibility and ease of use.  Capable of pumping solids up to .5-inches, the durable design is made to move large amounts of water. DAE Pumps drainage pumps handle clean and dirty water with the best performance and efficiency on the market. Our drainage pumps provide powerful performance with minimal maintenance, and their durable body ensures continued use in harsh environments. We offer a variety of drainage pumps in 3-inch, 4-inch, 6-inch, and 10-inch discharge outlets with a horsepower of over 80 HP, and capable of pumping up to 6100 GPM.

Made to pump thick mud and other similarly viscous mixtures of liquids and solids, submersible sludge pumps are used for moving sludge or light slurry, tank clean-outs, trench and pond cleaning, mining dewatering operations, and various other applications. The sludge pump moves the material that can clog ordinary drainage pumps.

DAE Pumps heavy-duty sludge pumps can move water, but they are made for moving solid material and are built with a high wear resistance inside and out. The high-chrome (55HRC) impellers and base of the pump ensures stability while allowing the passage of large solids. The high-quality components for the mechanical seal guarantees a watertight seal and trouble-free operation. Our submersible sludge pumps move up to 420 GPM and come in multiple sizes and power options. These sturdy sludge pumps provide the reliability you need and the performance you can trust for your dewatering, cleaning, and transferring needs.

The submersible slurry pump is the catch-all of submersibles. Capable of pumping the most abrasive media with high solids content, the slurry pump is the workhorse for quarries and settling pond operations. These ultimate pumps are used for everything from dewatering to dredging.

DAE Pumps non-clogging submersible slurry pumps provide the ultimate in toughness.They have the largest apertures to facilitate the handling of slurry with the most challenging solids and the high-efficiency high chrome agitator can lift settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. Our slurry pumps are available in 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

Sand is one of the most abrasive materials for any type of pump to manage. The beating of sand on the impeller, volute, and even the hose cause extreme wear and tear on pump components. Thesubmersible sand pump is designed to minimize the effects of blasting sand. However, over a period of extended time, the submersible sand pumps will show signs of wear on these parts from the constant pounding of sand and will require replacement.

Our submersible sand pump wear components are built with a high chromium iron, an extremely strong alloy that is mainly used in mining, milling, earth-handling, and manufacturing industries which require materials with exceptional wear and corrosion resistance. The exceptional wear resistance of high chromium cast iron is due to the high volume fraction of hard chromium carbides. The toughness of the matrix also contributes to the wear resistance and makesit very suitable for pumping sand.

DAE Pumps non-clogging submersible sand pumps provide the ultimate in toughness and sand pumping capabilities. Ourpumps move up to 1664 gallons per minute of material and are available in 3-inch, 4-inch, and 6-inch models.

Since 1969, MBH Pumps owned by Kamania family, manufactures and develops centrifugal pumps for submersible and surface installations. Over the years the Company has diversified its activity from the production of pumps for agricultural applications to Domestic, Industrial, Municipal waste water, Slurry, Water Intake and various other applications.

MBH Pumps is the right partner of every Company around the world because it is able to respond quickly and efficiently to the rapid market trends. The wide range of centrifugal pumps, the well-established experience and the continuous production quality improvement, has earned MBH pumps a well reputed name in the Competitive Market.

CHIOR VPH Long-Shaft Cutting Pumps with suction from above and double chopping tool excel through their high pumping capacity and cutting efficiency. The design of the pump housing, either made of cast ...

CHIOR SPB-type Submersible Chopper Pumps are designed for shredding and lifting slurry from animal husbandry, biogas digestate or industrial wastewater containing lumpy and fibrous solids.

... used as suction pumps. All our submersible pumps feature a check valve, which prevents the slurry from entering the tractor’s hydraulic system in the event of a hose rupture.

... used as suction pumps. All our submersible pumps feature a check valve, which prevents the slurry from entering the tractor’s hydraulic system in the event of a hose rupture.

... from among the three alternatives. All our pump crane models can be fitted with a transfer pumping function, which allows slurry to be discharged into a storage pond or similar using the pump ...

A.TOM PUMP 290 stations are designed for pumping of liquid manure, liquid effluents from storage facilities and its subsequent application to the fields as organic fertilizers.

Sale and rental of pump-diesel station A.TOM PUMP STATION 295 for pumping of liquid manure and liquid effluents from storages with subsequent application to the fields as organic fertilizers. ...

In order to be able to transport especially thick and fibrous media in a safe and controlled manner, such as slurry or digestate in biogas plants, our pumps (4000 ...

The central pump station (ZPS) distributes media between the tanks of a biogas plant quickly and efficiently. It is ideally located in a building arranged centrally between the tanks. Then the pump station ...

The Electromix System includes a low power pump with hydraulically driven piston and the Electromix agitator. This system evacuates dairy manure that has been fully agitated and homogenized through underground ...

... driven eccentric screw pump HelixDrive, which is ideal for stationary use in agriculture and industry, is the optimal solution for customers with high demands. The possible application spectrum of this pump ...

Pumping liquid manure is routine work in agriculture. The FX series is designed for daily use in an agricultural operation, taking into account the special requirements of liquid manure and making work ...

... applications including vertical pit pumps, agitators, mixing pumps and dairy flush pumps. With the ability to configure our pumps for a wide range of flow rates and manure ...

EYS Piston Pump is designed to transfer high viscosity materials and materials including straw, sand, etc. over high heads and long distances efficiently with low power consumption.

... storage with the versatile power of the Puck Force Feed manure pump unit. Built solid with hydrostat controls and a variety of attachments for all of your pumping needs, our Force Feed lead pump ...

If you need to pump further than 4km you can use an MP intermediate pump. The intermediate pump increases your pumping distance with a further 4km (subject ...

3 phase submersible pump becomes a bestselling product and most customers ask for a price list whereas the price of a pump is the result of some factors that will be discussed here.

Second, the head of the pump is the characteristic that is measured by meter or feet and it tells us how far a pump can deliver water from a water source.

As water is an inseparable part of agriculture, it is an important specification for farmers because tells them how much water a pumping machine can deliver in a time frame.

As the submersible pump is a pump that is placed within the water, the depth of the water reservoir is a principal factor in choosing a submersible pump.

All in all, 3 phase submersible pump is a well-liked water elevator as it is manufactured with different specifications. All of the mentioned specifications and the rest of them which will be discussed in this article later can influence the price and make a new price list.

A 1.5 hp submersible pump is made of a multistage turbine pump that is assembled vertically, connected directly to an electric motor, and is available at competitive prices.

1.5 hp is a proper power for domestic uses as it is used for drainage in floods, sewerage pumping, emptying pond, or even as pond filters. Bear in mind that this pump will not handle debris very well.

For water that consists of debris, dirt, mud, and particles, the slurry pump is the proper choice as its construction is in accordance with abrasiveness.

Taro provides a wide range of capacities for 4-inch wells and larger ones. Three-phase submersible pumps mostly used for agriculture require services.

In conclusion, the pump industry has rapidly developed over the past few years and some companies such as Taro Pumps could successfully last in the competition among other corporations and reach the customer’s satisfaction.

There are other submersible manufacturers in India as well who try to capture more part of the market and as a result, it becomes a neck and neck competition.

Kirloskar has been involved in the pump industry since 1888 and is one of the famed Indian manufacturers who has supplied customers with high-quality, robust, and reliable submersible pumps.

When you check Kirloskar’s price list, it is important to pay attention to the specification of the pump because the price is not the only factor to choose from.

Undoubtedly a pump that is not based on the customer’s desires not only meets the customers" requirement in an efficient manner but also waste money and money.

Unquestionably, the large volume of global demands for submersible pumps and producing high durable products makes manufacturers produce 3 phase submersible pumps based on the customers" requirements that can work in different situations in a smooth manner.

Although submersible pump manufacturers provide their customers with price lists, manufacturers must get information from customers about the desired submersible pump and act as a consultant for them to offer them the most proper pump.

AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCabo VerdeCambodiaCameroonCanadaCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos IslandsColombiaComorosCongoCongo, Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzechiaCôte d"IvoireDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEswatiniEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHoly SeeHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea, Democratic People"s Republic ofKorea, Republic ofKuwaitKyrgyzstanLao People"s Democratic RepublicLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacaoMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth MacedoniaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRomaniaRussian FederationRwandaRéunionSaint BarthélemySaint Helena, Ascension and Tristan da CunhaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint MaartenSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan MayenSwedenSwitzerlandSyria Arab RepublicTaiwanTajikistanTanzania, the United Republic ofThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkmenistanTurks and Caicos IslandsTuvaluTürkiyeUS Minor Outlying IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVenezuelaViet NamVirgin Islands, BritishVirgin Islands, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabweÅland Islands

Sewage PumpWe are a leading Manufacturer of submersible sewage pump, submersible sewage cutter pump, submersible cutter sewage pump, submersible sewage pumps, stainless steel sewage pump and abs sewage pump from Coimbatore, India.

Our Submersible Sewage Cutter Pump are ideal for waste water treatment of chemical industry, medical, industry, hospital. Laboratory, electronics industries, drainage of food market, waste water treatment of animal husbandry, water refining tank waste water plant, drainage of building basement, waste water treatment of food industry, pulp and paper industry, steel mill, and other industries.

Speed of flow is superiorly designed and can be applied within big pump housing and impeller to achieve high efficiency and high performance for any waste water

Designed for draining abrasive water from construction sites, mines, docks, flooded areas, basement dewatering etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. These pumps have an excellent performance capacity with high motor power combined with compact light weight design. It is portable and self priming with bottom suction which enables the pump to dewater up to the lowest level.

We are a highly acclaimed name to offer a gamut of superior quality Submersible Sewage Pump. Submersible sewage pumps are directly driven by an air filled electric motor cooled by surrounding sewage. This ensures that the pumps are fabricated from high grade raw material using state-of the-art machines to offer optimum performance at users end. Equipped with an automatic reset motor protector / heavy duty bearing high efficiency copper wound motor / in-built lip seal to prevent ingress of silt & sand / with / without float switch.

Sewage Pump Cutter Series - We are reputed for supplying the Submersible Cutter Sewage Pump. These have been perfectly made and are equipped with machinery components that will only improve their performances. As far as installing and operating them are concerned, it is quite hassle-free. All-Flow will continue to grow and develop at a rapid speed and we will be one of the best pumps distributing in this field. Whenever and wherever the customers are, we are always there to help.

we are one of the leading manufacturers of various types of Sewage Submersible Pumps for wastewater and industrial applications. With our commitment to quality and customer satisfaction, we have grown multifold with dealer network all over India and esteem clients in all sectors.

We excel in offering a wide range of Stainless Steel Sewage Pump. Our pumps are available in various range, dimensions and thickness as per the exact requirements and demands of clients. Manufactured using top quality components and following the international market trend, these Stainless Steel Sewage Pumps are acclaimed for durability.

Matching up with the ever growing demands of the customers, we are involved in offering high quality assortment of ABS Sewage Pump. Our product range is known for its rugged construction, longer service life and easy installation. To attain the maximum satisfaction of clients, we are providing these products at industrial leading rate.

Being a quality oriented organization in this business, our company is involved in offering a supreme quality range of Cast Iron Sewage Pump to our clients. This product is made with high quality of material and enriched with sharp edge technology. Our products are tested on different quality parameter before dispatching to the market.

We are a precursor in manufacturing and supplying an extensive range of Clean Water Submersible Pump. We have implemented leading technology to design the pumps and installed an induction motor that is insulated with a high grade protective coating to prevent over heating conditions.Features:

With the help of our professionals, we are able to offer excellent quality Cutter Sewage Pumps. The offered sewage pumps are highly demanded in agricultural industry. These sewage pumps are precisely engineered in adherence to the industry quality standards using supreme quality components and contemporary technology by our vendors’ experienced professionals. Our valuable clients can avail these sewage pumps from us in varied technical specifications at most reasonable price.

Our company is well known for offering Sewage Pump of top quality at highly reasonable rates. We provide these items with the help of the most trusted vendors available in the industry. The skilled supply team of our firm makes sure that these vendors hold the necessary certification and authorization. Besides this, our vast distribution network makes sure that these items are provided to the customer within the scheduled time frame without any hassles. We are eminent leaders in the industry and offer our clients some of the best quality Drainage Pump.Of premium brands these products are obtained by us from reputed vendors in the industry. These vendors ensure their fabrication from top-notch material using innovative technology. Customers value these products for their modern design, sturdy construction, tough structure, wearing resistance and smooth operation. Featuring these outstanding properties these products can be availed from us at competitive rates that suit client budgets

We offer our prestigious clients the premium range of Sludge Pump. In synchronization with the set industry standards, our provided pump is well-manufactured using high grade components and latest technology. Owing to its durability and less maintenance, this pump is widely appreciated by our precious clients. Moreover, to ensure the best quality, the offered pump is stringently checked by our quality experts against different quality parameters.

Backed by our team of experts in this domain, we are instrumental in offering Mud Sewage Pumps. Our Submersible Pump is a single stage, the submersible and centrifugal pump of closed coupled construction. Our pump range is extensively used for handling of municipal and industrial waste water. We avail this pump to our client in very affordable rates.

We offer this innovative range Submersible Slurry Pump which finds extensive applications in Agriculture irrigation, drainage of fishing ponds, aqua farm, subway, flood control, water supply for landscape.

Our Sewage Chopper Pumps are ideal for waste water treatment of chemical industry, medical, industry, hospital. Laboratory, electronics industries, drainage of food market, waste water treatment of animal husbandry, water refining tank waste water plant, drainage of building basement, waste water treatment of food industry, pulp and paper industry, steel mill, and other industries.

We are engaged in offering our valuable clients a premium quality assortment ofSewage Grinder Pumps. At our vendor"s end, provided pumps are manufactured under the vigilance of skilled professionals making use of quality assured components with the aid of innovative technology. Our offered pumps are widely used in bath tubs, washing machines for management of waste water. To ensure their functionality, these pumps are precisely inspected by the quality examiners as per the preset guidelines of the industry.

With an increased proportion of technology, we are offering a qualitative assortment ofSubmersible Wastewater Pump. Backed by a team of experts, this is manufactured using high grade raw material and advance technology by our skilled professionals. Used for pumping clean or muddy water from low pressure to high pressure. Furthermore, offered pump is availed in various capacity and specifications, as per the varied needs of our valuable clients.

With our expertise in this domain, we offer Drainage Pump that are easy to maintain and resistant to wear & tear. These are durable and mainly used in steel plants and for agriculture purposes. We make use of quality components and spare parts in manufacturing process to ensure long working life and outstanding performance of Sewage Pumps.

With our expertise in this domain, we offer Mud Pumps that are easy to maintain and resistant to wear & tear. These are durable and mainly used in steel plants and for agriculture purposes. We make use of quality components and spare parts in manufacturing process to ensure long working life and outstanding performance of Sewage Pumps.

Our Chopper Pumps are ideal for Civil engineering, drainage of subway / tunnel for solid sediment, water treatment of ironworks, mobile use for drainage of public facilities, removal of sludge at harbor / river, other drainage of slurry in the industries.

Pump housing and stress eliminating plate are both made of high wear-resisting cast iron for durability, and an innovative design between pump housing bracket and mechanical seal lid to reduce flow stress and last the life of seals longer

With an increased proportion of technology, we are offering a qualitative assortment ofDrainage Pump. Backed by a team of experts, this is manufactured using high grade raw material and advance technology by our skilled professionals. Used for pumping clean or muddy water from low pressure to high pressure. Furthermore, offered pump is availed in various capacity and specifications, as per the varied needs of our valuable clients.

Wastewater Pumps available in series from 1.5 Hp to 50 Hp with high discharge head from 2 mtr to 60 mtr. The pump outer body is completely Stainless Steel 304 with twins tungsten carbide mechanical seal for long life and for rotor shaft SS 431 for the better magnetic result. The pumps are utilized in building construction, steel plants, mines, power stations, sites etc.

Portable Dewatering Pumps, light weight, handy, compact, devoted to design and manufacturing for application in Steel Plants, Power Plants, Irrigation Projects, River water Pumping, Construction sites and all types of drainage applications.

A Slurry Pump is a type of centrifugal pump, lobe pump or peristaltic hose pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energy.

A Grinder Pump is a wastewater conveyance device. Waste from water-using household appliances (toilets, bathtubs, washing machines, etc.) flows through the home"s pipes into the grinder pump"s holding tank.

Backed by immense knowledge and industry-experience, we are able to offer a wide range of Waste Water Lifting Pumps. Offered sewage pump is manufactured with well-tested material and leading technology in adherence with set industry norms. This sewage pump is applauded for its salient features. Moreover, our customers can avail this sewage pump at nominal rates.

The relatively small size and weight make these pumps specially suitable for temporary services like of construction sites and for emergency services in case of flooding

Other Details: Abrasive resistance SS 316 vertex impeller Stainless steel outer casing and strainer Double mechanical seal High cooling effect due to the side discharge channel Continuous Operation Applications: Residential, Commercial, & Industrial Dewatering Construction Sites Civil engineering project Operation Conditions: Flow range (Q ): 100 LPM ~ 4000 LPM Liquid temperature: 5C ~+40C Pressure:60 M Head (Maximum) Frequency: 50/60 Hz MOC: Pump casing NBR/FC200,Cast iron body, Outer Casing & Strainer SS 304, Impeller SS316 Spherical clearance: 20 MM

By keeping track of latest developments, we are offering a wide range Septic Tank Pump. This pump is robustly constructed using high grade raw material and advanced techniques. Widely used for the dewatering from construction sites. To meet the diverse requirements of our esteemed clients, offered range is availed in different capacities and dimensions. Furthermore, clients can avail the offered product from us at the most reasonable prices.We provide following range 1.5HP to 15HP.

The Sewage Cutter Pump are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.