thick mud pump pricelist

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. Pump seat is equipped with four skeleton oil seal and shaft sleeve, prevent shaft wear, prolong the service life of the shaft.

High quality vertical mud pumps with thick, solid shaft and copper motor can be provided in ATO shop. Various models are available, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and 6 inch mud pump. Here is the price list of vertical mud pump.

Sewage mud pump is used in mining, papermaking, printing and dyeing, environmental protection, ceramics, refining, petroleum, chemical industry, farm, dyeing, brewing, food, construction, gold mine, mud, quicksand, mud pond, sewage pond, turbid fluid to send suction thick liquid, loading and suspended matter sewage operation, can also be used for mine drainage and fluid containing mud blocks.

If the mud pump and high-pressure water pump, water gun with the composition of hydraulic mechanized earthwork unit, can be used for land leveling, river and pond dredging, digging and other small water conservancy projects, as well as urban air defense engineering, underground engineering.

The DAE Pumps Submersible Drainage Pumps support a variety of dewatering applications. Their robust design provides the highest level of performance, reliability, and ease of use. The submersible drainage pumps offer a range of sizes up to 10-inches with over 80 HP and a volume capability of pumping as much as 6100 GPM.

Submersible Sludge Pumps are peak performers in pumping thick mud, clay, and waste. These energy-efficient pumps run at low horsepower, pumping as much as 420 GPM. Available in 3-inch and 4-inch sizes, the heavy-duty DAE Pumps Submersible Sludge Pumps are capable of moving abrasive solids as large as 2-inches. Our Submersible Sludge Pumps provide the support you need for for your toughest jobs.

The DAE Pumps Submersible Slurry Pumps are the toughest and most durable submersible pump. Built for pumping the worst slurry and materials, these pumps have the highest rating in ruggedness. Our Submersible Slurry Pumps are made for dredging the most abrasive media with high solid content in quarries and mining operations. With up to 102 horsepower, these powerful unit are capable of moving 2112 GPM of solids as large as 2.5-inches, and are available in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

The DAE Pumps Payload Electric Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Payload Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

The DAE Pumps Hydraulic Submersible Slurry Pumps are the industry’s best-performing hydraulic submersible pumps. Capable of pumping up to 1325 GPM our hydraulic pumps provide the reliability you need. Because these 3-inch and 4-inch pumps are compact, their lightweight design makes them necessary tools for all site operations. They are non-clogging and are also available in a high head performance of up to 350 feet

The DAE Pumps Hauler Hydraulic Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Hauler Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

DAE Pumps is committed to providing you with the highest quality of pumps at affordable prices. We build our submersible pumps with you in mind. We use the strongest material inside and out to withstand the harshest conditions for getting the job done. Over the years, we built a modular platform of submersible pump that allows us to provide the highest performing pump with the same durability and reliability from one size and power to the next. This means you get the best pump each time.

Our low-cost submersible pump lines are an extension of our commitment to affordably priced pumps. These pumps are built with the same types of metal inside and out as our modular lines, but use a different technology design that brings the performance of these pumps close to those of the other models. We offer these pumps with a lower guarantee so you can get very high-grade pumps at the best prices.

Submersible pumps are the industry’s most durable pumps for underwater operations moving solids and liquids. They can withstanding everyday use of processing water, rocks, sand, mud, sludge, slurry, and other abrasive materials. DAE Pumps provides a variety of submersible pumps for mining, dredging, minerals processing, ash pumping, wastewater, dewatering, and pumping chemicals, oil, sludge, paste, and many other applications. We offer light-duty to heavy-duty submersible drainage pumps, submersible sludge pumps, and submersible slurry pumps.

The submersible drainage pump is built for general dewatering, groundwater, raw water, and construction site use. Construction companies and various municipalities use drainage pumps for removing water from heavily flooded areas and as sump pumps when rainwater or groundwater collects in low-lying and below ground work areas.

DAE Pumps drainage pumps are designed for flexibility and ease of use.  Capable of pumping solids up to .5-inches, the durable design is made to move large amounts of water. DAE Pumps drainage pumps handle clean and dirty water with the best performance and efficiency on the market. Our drainage pumps provide powerful performance with minimal maintenance, and their durable body ensures continued use in harsh environments. We offer a variety of drainage pumps in 3-inch, 4-inch, 6-inch, and 10-inch discharge outlets with a horsepower of over 80 HP, and capable of pumping up to 6100 GPM.

Made to pump thick mud and other similarly viscous mixtures of liquids and solids, submersible sludge pumps are used for moving sludge or light slurry, tank clean-outs, trench and pond cleaning, mining dewatering operations, and various other applications. The sludge pump moves the material that can clog ordinary drainage pumps.

DAE Pumps heavy-duty sludge pumps can move water, but they are made for moving solid material and are built with a high wear resistance inside and out. The high-chrome (55HRC) impellers and base of the pump ensures stability while allowing the passage of large solids. The high-quality components for the mechanical seal guarantees a watertight seal and trouble-free operation. Our submersible sludge pumps move up to 420 GPM and come in multiple sizes and power options. These sturdy sludge pumps provide the reliability you need and the performance you can trust for your dewatering, cleaning, and transferring needs.

The submersible slurry pump is the catch-all of submersibles. Capable of pumping the most abrasive media with high solids content, the slurry pump is the workhorse for quarries and settling pond operations. These ultimate pumps are used for everything from dewatering to dredging.

DAE Pumps non-clogging submersible slurry pumps provide the ultimate in toughness.They have the largest apertures to facilitate the handling of slurry with the most challenging solids and the high-efficiency high chrome agitator can lift settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. Our slurry pumps are available in 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

Sand is one of the most abrasive materials for any type of pump to manage. The beating of sand on the impeller, volute, and even the hose cause extreme wear and tear on pump components. Thesubmersible sand pump is designed to minimize the effects of blasting sand. However, over a period of extended time, the submersible sand pumps will show signs of wear on these parts from the constant pounding of sand and will require replacement.

Our submersible sand pump wear components are built with a high chromium iron, an extremely strong alloy that is mainly used in mining, milling, earth-handling, and manufacturing industries which require materials with exceptional wear and corrosion resistance. The exceptional wear resistance of high chromium cast iron is due to the high volume fraction of hard chromium carbides. The toughness of the matrix also contributes to the wear resistance and makesit very suitable for pumping sand.

DAE Pumps non-clogging submersible sand pumps provide the ultimate in toughness and sand pumping capabilities. Ourpumps move up to 1664 gallons per minute of material and are available in 3-inch, 4-inch, and 6-inch models.

The DAE Pumps Submersible Slurry Pumps are designed for an extensive range of applications. With their robust designs, submersible slurry pumps move slurry, sand, and other material with ease. Heavy-duty submersible slurry pumps from DAE Pumps are capable of pumping solids up to2112 GPM with as much as 102 HP. DAE Pumps submersible slurry pumps are available in a wide range of models in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

Our non-clogging submersible slurry pumps are the toughest in the industry and have the largest apertures to facilitate the handling of slurry with the most challenging solids. The high-efficiency high chrome agitator lifts up to 2.5-inch settled solids. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application.

DAE Pumps robust submersible slurry pumps are made to perform. The unique sealing system and modular design make them the most flexible pumps on the market. Easy to use and maintain, these pumps provide the optimum maintenance solution and can be easily fitted at the job site. These heavy-duty submersible slurry pumps offer a motor protection system with a built-in starter and optional automatic level control. The hardened high-chrome impellers and adjustable wear-resistant rubber diffuser feature ensure durability in the toughest environments.

At DAE Pumps, we have a complete range of high-quality submersible slurry pumps made for dewatering and dredging the most abrasive media, like sand, with high solid content in quarries and mining operations. The user-friendly design and easy-to-use submersible sand and slurry pumps are why they are the preferred choice for submersible pumps.

Submersible slurry pumps and submersible sand pumps offer the highest in quality and strength over other submersible pumps. They are capable of moving large amounts of sand and slurry with ease and without clogging. DAE Pumps submersible sand and slurry pumps withstand the abrasive material that passes through them on a consistent basis and provide the power to move the material. The following is to help understand pump specifications for selecting the right submersible slurry pump or sand pump for you. A DAE Pumps representative is also available.

The size of the submersible pump is important when connecting the discharge end. The hose or pipe that connects to the pump should match the discharge or the pump. If fitting an adjustment to the end of the submersible slurry pump, the fitting can only work when goes downward in size, not upward. Typically, the pump size limits the gallons per minute a submersible slurry pump is capable of pumping. The larger the pump size, the more allowable volume, and solids sizes.

The power of the electrical submersible slurry pump is determined by the motor size in horsepower. The more horsepower, the more material it can move (volume), and the higher the head of which it can pump. When moving sand and slurry, it is important to take horsepower into consideration. As sand and slurries can be heavy, this causes friction that slows down the movement of the material. If there is too much friction and the submersible sand pump is not powerful enough to push the sand or slurry, the material will start to settle in the hose or piping, and not deliver to the final destination.

When selecting a submersible slurry or sand pump be sure to understand the volume of the material you are looking to move. Submersible pump specifications are typically based on pumping water. When pumping sand, slurry, and other solids, DAE Pumps industrial slurry pumps move between 15% to 30% solids.  Therefore, the remaining 70% to 85% is water.  While a 100 GPM sand pump can process about 15% material, thus 15 GPM of sand, a 100 GPM slurry pump can process about 30% material, thus 30 GPM of slurry. This all varies depending on how aggressive the operator is with the pump. Ensuring the correct power of a sand pump is essential for delivering sand the distance needed because sand is heavy and settles. Not enough power will leave sand in the hose and backup. Knowing the liquid viscosity is important for ensuring proper pumping. Ask DAE Pumps for assistance with a viscosity test to ensure accurate pump selection.

In addition to the amount of material you pump, you want to make sure there is a consistent inflow of water or fluid replacing liquid and material that is being pumped out for the proper operation. Lack of fluid is never good for submersible pumps.

Here are a couple of equations and examples to help figure out how much material a submersible slurry pump can move and approximately how long it will take to move your material.

The head is the height at which the pump can raise water. The weight of a gallon of water at room temperature is 8.33 lbs. If all that is being pumped is room temperature water, the height a submersible slurry pump could pump that water is the max head stated on the pump specifications. However, submersible slurry pumps and submersible sand pumps are pumping more than just room-temperature water. They are pumping sand, silt, rocks, mud, debris, and other types of slurries. These slurries have a different weight that is more than the weight of water. Thus, the head of a pump that is pumping slurries and sand is going to be less than the stated head on a pump.

The size of solids is that can pass through a submersible slurry pump are typically determined by the allowable area between the pump’s impeller and the volute. Submersible pumps are designed with more or less separation for the type of material they are intended to handle. Those with more separation are submersible slurry pumps because they can process larger materials. The submersible pump with less separation is a drainage pump that does not move many solids.

Your dewatering needs are our top priority. Our electrical submersible pumps support all your dewatering application needs for drainage, slurry, and sludge. Visit our dewatering applications section to learn more about various types of dewatering needs.

The non-clogging Miramar Submersible Slurry Pumps are the toughest and have the largest apertures to facilitate the handling of slurry with the most challenging solids. The high-efficiency high chrome agitator lifts settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. The Miramar Slurry Pumps offer 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

DAE Pumps Miramar L430 Submersible Slurry Pumps are built to move abrasive materials with solids up to 0.8-inches. With a 3-inch discharge, these slurry pumps process material at 247 GPM up to 47-feet via a 5 HP motor.  This 60Hz pump is available in 460V.

The Miramar L430 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

The low-cost DAE Pumps Tampa 337 provides ideal suction and movement of solids up to 1-inch through a 3-inch discharge. The ergonomic Tampa 337 submersible slurry pumps transfer solids and liquids at a flow rate of up to 343 GPM and with 5 HP.  Read More…

DAE Pumps Tampa 355 provides reliable suction and movement of solids up to 1-inch through a 3-inch discharge. The ergonomic Tampa 355 submersible slurry pumps transfer solids and liquids at a flow rate of up to 449 GPM and with 5 HP.  Read More…

The durable and efficient DAE Pumps Tampa 437 provides improved suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 437 submersible slurry pumps transfer solids and liquids at a flow rate of up to 476 GPM and with 5 HP.   Read More…

The durable and efficient DAE Pumps Tampa 437 provides improved suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 437 submersible slurry pumps transfer solids and liquids at a flow rate of up to 476 GPM and with 5 HP.   Read More…

3The Lansing 340 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 340 submersible slurry pump has a 4kW or 5.5HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

The rugged DAE Pumps Miramar L540 Submersible Slurry Pumps process abrasive materials with solids up to 1-inch. These durable slurry pumps with 4-inch discharge move material at 308 GPM up to 57-feet via a 7 HP motor.  This 60Hz pump is available in 460V.

The Miramar L540 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

DAE Pumps Tampa 455 provides greater suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 455 submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.  Read More…

4The Lansing 460 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 60 submersible slurry pump has a 6kW or 8HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

The reliable DAE Pumps Tampa 475 provides increased suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 475 submersible slurry pumps transfer solids and liquids at a flow rate of up to 655 GPM and with 10 HP.   Read More…

Offering the same high-quality, the DAE Pumps Miramar L640 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these heavy-duty slurry pumps process material at 440 GPM up to 75-feet via a 12 HP motor.  This 60Hz pump is available in 460V.

The Miramar L640 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

The heavy-duty DAE Pumps Miramar L740 Submersible Slurry Pumps transfer abrasive materials with solids up to 1-inch. With a 4-inch discharge, the Miramar L740 slurry pumps move material at 616 GPM up to 85-feet via a 15 HP motor.  This 60Hz pump is available in 460V.

The Miramar L740 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

The efficient DAE Pumps Tampa 4110 provides enhanced suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 4110 submersible slurry pumps transfer solids and liquids at a flow rate of up to 819 GPM and with 15 HP.   Read More…

DAE Pumps Miramar L840 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these reliable slurry pumps process material at 660 GPM up to 98-feet via a 20 HP motor.  This 60Hz pump is available in 460V.

The Miramar L840 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

DAE Pumps Galveston 3304 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 4-inch discharge. The Galveston 3304 submersible slurry pumps transfer solids and liquids at a flow rate of up to 792 GPM and with 30 HP.  Read More…

The high power 4-inch DAE Pumps Miramar L940 Submersible Slurry Pumps move abrasive materials with solids up to 1.5-inches. These 4-inch discharge submersible slurry pumps move liquids and solids at 880 GPM up to 171-feet via a 50 HP motor.  This 60Hz pump is available in 460V.

The Miramar L940 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

The DAE Pumps Tampa 6110 provides high suction and movement of solids up to 1.4-inches through a 6-inch discharge. The ergonomic Tampa 6110 submersible slurry pumps transfer solids and liquids at a flow rate of up to 977 GPM and with 15 HP.  Read More…

The Lansing 690 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 690 submersible slurry pump has a 9kW or 12HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

DAE Pumps Tampa 6150 provides enhanced suction and movement of solids up to 1.4-inches through a 6-inch discharge. The ergonomic Tampa 6150 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1136 GPM and with 20 HP.  Read More…

The highly efficient DAE Pumps Tampa 6150-L provides even greater suction and movement of solids up to 1.4-inches through a 6-inch discharge. The ergonomic Tampa 6150-L submersible slurry pumps transfer solids and liquids at a flow rate of up to 1453 GPM and with 20 HP.  Read More…

DAE Pumps Tampa 6220 provides ideal suction and movement of solids up to 1.2-inches through a 6-inch discharge. The ergonomic Tampa 6220 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1268 GPM and with 30 HP.  Read More…

DAE Pumps Galveston 3306 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 2.5-inches with a 6-inch discharge. The Galveston 3306 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1848 GPM and with 30 HP.   Read More…

DAE Pumps Galveston 3506 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 6-inch discharge. The Galveston 3506 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 50 HP.   Read More…

DAE Pumps Galveston 3506-H pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 6-inch discharge. The Galveston 3506-H submersible slurry pumps transfer solids and liquids at a flow rate of up to 1848 GPM and with 50 HP.   Read More…

DAE Pumps Miramar L1060 Submersible Slurry Pumps are built to move abrasive materials with solids up to 2.5-inches. With a 6-inch discharge, these slurry pumps process material at 1320 GPM up to 108-feet via a 60 HP motor.  This 60Hz pump is available in 460V.

The Miramar L1060 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

DAE Pumps Galveston 3756 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 6-inch discharge. The Galveston 3756 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 75 HP.  Read More…

DAE Pumps Miramar L1160 Submersible Slurry Pumps offer the ultimate performance in slurry pumping. This top-of-the-line pump easily handles the most abrasive materials with solids up to 2.5-inches. This heavy-duty slurry pump with a 6-inch discharge transfers material at 2112 GPM up to 174-feet via a 101 HP motor.  This 60Hz pump is available in 460V.

The Miramar L1160 is made of aluminum alloy for high corrosion resistance and the high-chrome (55HRC) impellers provide great wear resistance. The wide base is designed for stability while standing in thick material.

The Lansing 8150 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 8150 submersible slurry pump has a 15kW or 20HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

The reliable DAE Pumps Tampa 8220 provides the highest suction and movement of solids up to 1.4-inches through an 8-inch discharge. The ergonomic Tampa 8220 submersible slurry pumps transfer solids and liquids at a flow rate of up to 1664 GPM and with 30 HP.  Read More…

DAE Pumps Galveston 3508 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 2.5-inches with an 8-inch discharge. The Galveston 3508 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 50 HP.   Read More…

DAE Pumps Galveston 3758 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 2.5-inches with an 8-inch discharge. The Galveston 3758 submersible slurry pumps transfer solids and liquids at a flow rate of up to 2112 GPM and with 75 HP.  Read More…

The Lansing 8220 submersible slurry pump is solid and easy to move slurry, water, or any other material. DAE Pumps’ heavy-duty, submersible slurry pumps can handle up to 2112 GPM solids. They also have a maximum power output of 102 horsepower. DAE Pumps Submersible Drainage Pumps are available in many sizes, including3-inch,4-inch,6-inch, and8-inch.

The Lansing 8220 submersible slurry pump has a 22kW or 30HP, and it is non-clogging and can handle the most challenging solids. The high-efficiency, high chrome agitator, is capable of lifting 2.5-inch solids. For duty use, the sturdy design incorporates heavy-duty bearings for shocks and overloads.

DAE Pumps Miramar Submersible Slurry Pumps are economical equivalent pumps to Atlas Copco dewatering slurry pumps. The Miramar pumps offer the same high-quality material and performance as Atlas Copco WEDA series. Contact us today to find out more about how DAE Pumps can help you with all your dewatering and material moving needs.

The 4-Inch heavy-duty slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in extra heavy-duty (HD) class. Depending on your needs, all of our pumps can be setup horizontal or vertical.

Our industrial pumps are non-clog pumps with no critical tolerances designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

In harsh conditions with sand, sludge, rocks, slurry, normal dredge pumps clog, wear and fail more often. This leads to downtime for maintenance, hurting your bottom line. This is not the case with EDDY Pump since we have the tolerance to pump objects up to 12 inches!

The GATOR Sludge Pump offers many benefits and ensures consistently efficient processes for a variety of applications. Our unique slurry valve uses the pump discharge flow to agitate and slurry the sludge to “thin” the fluid for pumping and handling. After the slurry process is complete, the valve is closed to pump the sludge material to the discharge point.

Sludge pumps are used for many pit dewatering applications in the mining, industrial, agricultural, and construction industries, which often require the regular removal of waste products. Other types of pumps won’t be able to transfer liquids with high solid content, potentially resulting in clogging and backup that leads to system failure and costly downtime.

Low Energy Consumption. Portable sludge pumps feature efficient designs and reduced power consumption compared to other pump systems. As a result, you can save more money on energy costs with a more sustainable solution for waste removal. Low Energy Consumption. Portable sludge pumps feature efficient designs and reduced power consumption compared to other pump systems. As a result, you can save more money on energy costs with a more sustainable solution for waste removal.

High Abrasion Resistance. Sludge pumps are designed to handle abrasive solid materials, unlike other liquid pumping systems, making them more likely to hold up to abrasion. With less vulnerability to abrasion, you can avoid the need for frequent maintenance checks, downtime for repairs and replacements for parts.

High Wear Resistance. Since sludge pumps frequently transfer liquids containing solid content such as sand and gravel, they are constructed from high-quality materials to protect parts from wear. Less wear means further reduced maintenance and replacements, helping you get the most from each system.

Choosing the proper sludge pump largely depends on your application. Factors such as pump design, construction material, pump deployment, power requirements, and amount of solid content in the sludge are all important to consider when selecting a sludge pump for your project.

It is also crucial to work with a reputable sludge pump provider. Doing so grants you access to expert assistance in pump selection so that you can feel confident in your choice. At GATOR Pump, we can work with you to provide a high-quality, efficient, and reliable sludge pump that meets the specifications and requirements of your application.

When searching for the right sludge pumps for any application, GATOR Sludge Pumps can give you the reliability and efficiency you need. Our pump experts can also offer customization assistance; we can accommodate a wide array of unique requests and modifications.

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, and that’s that you need a heavy duty, high pressure sludge pump. Capable of efficiently handling viscous fluids containing solids, Castle Pumps’ range of slurry pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications. Not all pump designs can do the job, but that’s where we are there to help you. Our technical sales engineers are on hand to help you to select the right solution for your requirements.

For industrial, mining, milling, power plant, water treatment, sewage, organic waste, or anywhere slurry solids have a tendency to accumulate, agitator pumps are the answer. Since water always flows to the path of least resistance, a pump without mechanical agitation will only pump the water, leaving the solids behind to accumulate around your pump intake, and eventually starving the pump by blocking the intake. Agitator pumps deliver kinetic energy (energy of motion) to slurry solids surrounding the pump intake, re-suspending them into a fluid state. These solids, which would have otherwise buried and starved the pump of liquid, are pulled into the pump and pushed on through the discharge keeping the intake clear and free of slurry accumulation.

Submersible pumps, which are more efficient than jet pumps, contain a hermetically sealed motor and are used for pushing fluid to the surface. We offer submersible pumps for several applications, including mines, manholes, construction sites, sewage and other areas with a high concentration of solids. Our submersible pumps come in several different varieties in order to handle the different conditions you may face in the field:

Dewatering Pumps – Heavy duty abrasion resistant pumps for dewatering: mines, power plant sumps, manholes, and construction sites. Also as water supply pumps (3/4 to 45 hp).

Corrosion Resistant Pumps – For severe corrosion: all 316 stainless-steel recessed impeller pumps. (1 to 10 hp)For moderate corrosion: Rhino Coated aluminum with stainless steel impellers, shafts, and hardware (1.5 to 45 hp).

No matter what pump you’re looking for, Piranha Pumps will deliver on your expectations, however high they may be. When it comes to the best heavy-duty submersible pumps in the business, look no further than Piranha Pumps.

If you’d like to learn more about our submersible pump systems, don’t hesitate to contact us. An experienced Piranha Pumps team member will be happy to answer any questions you have. At Piranha Pumps, you can rest assured knowing that our dredging and pumping machines are powerful, efficient, and reliable.

As a "Woman Owned" business, we have successfully developed our business from small dewatering pumps to large industrial dredges and have dotted the world with our business products. We have a strong market demand on almost every continent and a continuous demand for all of our quality products. It is our mission here at Piranha Pumps to evolve and improve our products and services to accommodate the ever-changing global market and unique needs of our diverse customer base. We aim to lead the market with our competitive pricing and industrially advanced equipment while maintaining growth and customer satisfaction.

Plug in without having to worry about overheating. Built-in contactor and thermal sensors protect the motor from overheating. Pumps with a built-in AquaTronic unit will adjust electronically for incorrect phase order, ensuring correct impeller rotation.

The XJS is perfect for pumping sludge and water mixed with solids as it is equipped with a free-flow vortex impeller and a pump volute. The pump design, the robust construction and the premium materials ensure high wear resistance, and the impeller is available in different sizes to meet your specific requirements.

The modular design of the pump range reduces costs by ensuring maximum pump availability with a smaller spare parts inventory. The condition of a pump with a built-in AquaTronic unit can be rapidly checked without disassembly, using its service software.

We sell our commercial and residential pumps via an extensive distributor network. If you’re a contractor, you can purchase our products at well-known national industrial supply outlets like W.W. Grainger, Ferguson, and WinSupply. To find a distribution partner near you, visit our Distributor Search page and fill in your zip code. You can also check out the companies’ websites for additional information.

If you’re new to these systems, you may need assistance setting up and installing one of our pumps, and both contractors and product owners may need timely service on occasion. If you’re looking for a qualified installer for Zoeller pump products or need help with maintenance and repairs, you can find one quickly and easily by visiting our Service Locator page. We’ll direct you to a company that can respond to your needs.

If you ever need to replace worn or damaged pump parts, you can order what you need directly from us. Visit our Service Parts page, select the product and specific components you require, and complete the easy, convenient checkout process.

Feel free to contact us to learn more about our broad pump selection and service offerings. We can also help you find a distributor or service provider near you.

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for high head/high flow contractor and bypass applications