thick mud pump quotation

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

We provide a qualitative range of Mud Monoblock Pumps, which are immensely used in construction, agriculture, waste water management and many other industries

The 4-Inch heavy-duty slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in extra heavy-duty (HD) class. Depending on your needs, all of our pumps can be setup horizontal or vertical.

Our industrial pumps are non-clog pumps with no critical tolerances designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

In harsh conditions with sand, sludge, rocks, slurry, normal dredge pumps clog, wear and fail more often. This leads to downtime for maintenance, hurting your bottom line. This is not the case with EDDY Pump since we have the tolerance to pump objects up to 12 inches!

The 6-Inch heavy duty lines of slurry pump by EDDY Pump. Close coupled or flex coupled version pumps available in extra heavy duty (HD) class. Also, all of our pumps can be setup horizontal or vertical.

Our industrial pumps are non-clog pumps designed for high solids pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.

In harsh conditions with sand, sludge, rocks, slurry, normal dredge pumps clog, wear and fail more often. This leads to downtime for maintenance, hurting your bottom line. This is not the case with EDDY Pumps since we have the tolerance to pump objects up to 12 inches!

The DAE Pumps Submersible Drainage Pumps support a variety of dewatering applications. Their robust design provides the highest level of performance, reliability, and ease of use. The submersible drainage pumps offer a range of sizes up to 10-inches with over 80 HP and a volume capability of pumping as much as 6100 GPM.

Submersible Sludge Pumps are peak performers in pumping thick mud, clay, and waste. These energy-efficient pumps run at low horsepower, pumping as much as 420 GPM. Available in 3-inch and 4-inch sizes, the heavy-duty DAE Pumps Submersible Sludge Pumps are capable of moving abrasive solids as large as 2-inches. Our Submersible Sludge Pumps provide the support you need for for your toughest jobs.

The DAE Pumps Submersible Slurry Pumps are the toughest and most durable submersible pump. Built for pumping the worst slurry and materials, these pumps have the highest rating in ruggedness. Our Submersible Slurry Pumps are made for dredging the most abrasive media with high solid content in quarries and mining operations. With up to 102 horsepower, these powerful unit are capable of moving 2112 GPM of solids as large as 2.5-inches, and are available in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

The DAE Pumps Payload Electric Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Payload Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

The DAE Pumps Hydraulic Submersible Slurry Pumps are the industry’s best-performing hydraulic submersible pumps. Capable of pumping up to 1325 GPM our hydraulic pumps provide the reliability you need. Because these 3-inch and 4-inch pumps are compact, their lightweight design makes them necessary tools for all site operations. They are non-clogging and are also available in a high head performance of up to 350 feet

The DAE Pumps Hauler Hydraulic Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Hauler Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

DAE Pumps is committed to providing you with the highest quality of pumps at affordable prices. We build our submersible pumps with you in mind. We use the strongest material inside and out to withstand the harshest conditions for getting the job done. Over the years, we built a modular platform of submersible pump that allows us to provide the highest performing pump with the same durability and reliability from one size and power to the next. This means you get the best pump each time.

Our low-cost submersible pump lines are an extension of our commitment to affordably priced pumps. These pumps are built with the same types of metal inside and out as our modular lines, but use a different technology design that brings the performance of these pumps close to those of the other models. We offer these pumps with a lower guarantee so you can get very high-grade pumps at the best prices.

Submersible pumps are the industry’s most durable pumps for underwater operations moving solids and liquids. They can withstanding everyday use of processing water, rocks, sand, mud, sludge, slurry, and other abrasive materials. DAE Pumps provides a variety of submersible pumps for mining, dredging, minerals processing, ash pumping, wastewater, dewatering, and pumping chemicals, oil, sludge, paste, and many other applications. We offer light-duty to heavy-duty submersible drainage pumps, submersible sludge pumps, and submersible slurry pumps.

The submersible drainage pump is built for general dewatering, groundwater, raw water, and construction site use. Construction companies and various municipalities use drainage pumps for removing water from heavily flooded areas and as sump pumps when rainwater or groundwater collects in low-lying and below ground work areas.

DAE Pumps drainage pumps are designed for flexibility and ease of use.  Capable of pumping solids up to .5-inches, the durable design is made to move large amounts of water. DAE Pumps drainage pumps handle clean and dirty water with the best performance and efficiency on the market. Our drainage pumps provide powerful performance with minimal maintenance, and their durable body ensures continued use in harsh environments. We offer a variety of drainage pumps in 3-inch, 4-inch, 6-inch, and 10-inch discharge outlets with a horsepower of over 80 HP, and capable of pumping up to 6100 GPM.

Made to pump thick mud and other similarly viscous mixtures of liquids and solids, submersible sludge pumps are used for moving sludge or light slurry, tank clean-outs, trench and pond cleaning, mining dewatering operations, and various other applications. The sludge pump moves the material that can clog ordinary drainage pumps.

DAE Pumps heavy-duty sludge pumps can move water, but they are made for moving solid material and are built with a high wear resistance inside and out. The high-chrome (55HRC) impellers and base of the pump ensures stability while allowing the passage of large solids. The high-quality components for the mechanical seal guarantees a watertight seal and trouble-free operation. Our submersible sludge pumps move up to 420 GPM and come in multiple sizes and power options. These sturdy sludge pumps provide the reliability you need and the performance you can trust for your dewatering, cleaning, and transferring needs.

The submersible slurry pump is the catch-all of submersibles. Capable of pumping the most abrasive media with high solids content, the slurry pump is the workhorse for quarries and settling pond operations. These ultimate pumps are used for everything from dewatering to dredging.

DAE Pumps non-clogging submersible slurry pumps provide the ultimate in toughness.They have the largest apertures to facilitate the handling of slurry with the most challenging solids and the high-efficiency high chrome agitator can lift settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. Our slurry pumps are available in 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

Sand is one of the most abrasive materials for any type of pump to manage. The beating of sand on the impeller, volute, and even the hose cause extreme wear and tear on pump components. Thesubmersible sand pump is designed to minimize the effects of blasting sand. However, over a period of extended time, the submersible sand pumps will show signs of wear on these parts from the constant pounding of sand and will require replacement.

Our submersible sand pump wear components are built with a high chromium iron, an extremely strong alloy that is mainly used in mining, milling, earth-handling, and manufacturing industries which require materials with exceptional wear and corrosion resistance. The exceptional wear resistance of high chromium cast iron is due to the high volume fraction of hard chromium carbides. The toughness of the matrix also contributes to the wear resistance and makesit very suitable for pumping sand.

DAE Pumps non-clogging submersible sand pumps provide the ultimate in toughness and sand pumping capabilities. Ourpumps move up to 1664 gallons per minute of material and are available in 3-inch, 4-inch, and 6-inch models.

The GATOR Sludge Pump offers many benefits and ensures consistently efficient processes for a variety of applications. Our unique slurry valve uses the pump discharge flow to agitate and slurry the sludge to “thin” the fluid for pumping and handling. After the slurry process is complete, the valve is closed to pump the sludge material to the discharge point.

Sludge pumps are used for many pit dewatering applications in the mining, industrial, agricultural, and construction industries, which often require the regular removal of waste products. Other types of pumps won’t be able to transfer liquids with high solid content, potentially resulting in clogging and backup that leads to system failure and costly downtime.

Low Energy Consumption. Portable sludge pumps feature efficient designs and reduced power consumption compared to other pump systems. As a result, you can save more money on energy costs with a more sustainable solution for waste removal. Low Energy Consumption. Portable sludge pumps feature efficient designs and reduced power consumption compared to other pump systems. As a result, you can save more money on energy costs with a more sustainable solution for waste removal.

High Abrasion Resistance. Sludge pumps are designed to handle abrasive solid materials, unlike other liquid pumping systems, making them more likely to hold up to abrasion. With less vulnerability to abrasion, you can avoid the need for frequent maintenance checks, downtime for repairs and replacements for parts.

High Wear Resistance. Since sludge pumps frequently transfer liquids containing solid content such as sand and gravel, they are constructed from high-quality materials to protect parts from wear. Less wear means further reduced maintenance and replacements, helping you get the most from each system.

Choosing the proper sludge pump largely depends on your application. Factors such as pump design, construction material, pump deployment, power requirements, and amount of solid content in the sludge are all important to consider when selecting a sludge pump for your project.

It is also crucial to work with a reputable sludge pump provider. Doing so grants you access to expert assistance in pump selection so that you can feel confident in your choice. At GATOR Pump, we can work with you to provide a high-quality, efficient, and reliable sludge pump that meets the specifications and requirements of your application.

When searching for the right sludge pumps for any application, GATOR Sludge Pumps can give you the reliability and efficiency you need. Our pump experts can also offer customization assistance; we can accommodate a wide array of unique requests and modifications.

The pump mainly uses direct transmission mode, with high transmission efficiency. According to the needs of users can also use the belt transmission mode;

• Structural design, compared with the ordinary slurry pump, the inlet diameter of the pump is larger, the number of impeller blades is reduced, and the inducer is added to ensure that the pump has excellent cavitation performance and the ability to transport high viscosity and high concentration slurry.

• Structural design, compared with the ordinary slurry pump, the inlet diameter of the pump is larger, the number of impeller blades is reduced, and the inducer is added to ensure that the pump has excellent cavitation performance and the ability to transport high viscosity and high concentration slurry;

The symptoms of an overhaul in period services will show in the construction of submersible sludge pumps making them suitable for use in demanding applications such as those found in the mining, construction, and tunneling industries, as well as other fields that require high levels of performance. The operation of these pumps is intended to be completely uncontrolled at all times. Their dependability and productivity have been demonstrated in a wide variety of fields, such as civil and structural engineering, mining, tunneling, quarrying, industry, and even car wash systems and rental businesses. One point that you can be definite of is that you need a high-pressure slurry pump in order to transfer oil slurries, biowastes, sewage, sludge, or lime sludge. This is something that you can be certain of. Our variety of slurry pumps are able to manage viscous fluids that include solids successfully, and they have been hard at work for a number of years to provide clog-free solutions for applications that include the transfer of slurry. Although not all bomb designs will be successful, this is an area in which we can assist you. You have come to the exact right place if you are seeking a slurry pump with a heavy-duty motor to move waste slurry. Our professional sales engineers are able to assist you in selecting a solution that meets the demands of your organization. This heavy-duty, rubber-lined slurry pump can handle abrasives, fines, and viscous particles at high flow rates. Mining, paper, construction, and agricultural sectors utilize them to treat manure, bulk animal product waste, chemical sludge, clay, lime, fly ash, gravel, and mineral products. These units treat manure and animal waste. Applications include conveying, filtering pressure feeds, and purging with water jets or steam.

When a slurry pump is overhauled, its status reverts to a "New Heavy-Duty Pump". The replacement of all bearings and seals is an industry norm. Conduct a check on the mechanical seal, and then either repair or restore it as necessary. This typically comprises the replacement of bushings and shafts, as well as the recreation of notch spells and the restoration of impeller clearance. Work that must be done on any component, such as repairing the pump casing or the impeller, can be done inside the pump. The goal of repair work is frequently to rectify a particular issue, such as damaged shafts or failed seals, as an example. The following steps are included in our process of repair and refurbishment:

From standard peps or fan motor rebuilds to complete rewinds and refurbishments of large well pumps and motor systems, our diverse presence across all OEMs allows customers to benefit from greater efficiencies by hiring a single vendor to service their full range of equipment and greater cost control. Continuous condition monitoring and vibration analysis are also provided to help plan maintenance activities and reduce unexpected failures.

For the maintenance and service of the heavy-duty sludge pumps, it is necessary for the deck department as well as the engine department to be familiar with the operation and maintenance procedures for this equipment. This article will provide you with fundamental knowledge on how to operate a centrifugal pump smoothly and how to do maintenance and repairs on it. Someone could wonder why I brought up the deck department in the previous sentence. Deck department operators need to have this knowledge because, in order to operate equipment safely and effectively, it is necessary to have at least fundamental familiarity with the machinery being operated, if not professional-level expertise. Having this knowledge will not only get you ready to operate the equipment in the correct manner, but it will also provide you with the confidence to direct or comprehend the behavior of the machine. The majority of the time, disagreements between the deck crew and the engine department arise only because the machinery is not being used properly.

Popular heavy-duty machinery known as a sludge pump is one that boosts the power of fluids and solids that the application of centrifugal force has combined without any overhaul symptoms. It finds primary application in a variety of industries, including metallurgy, building, and mining, among others. The slurry pump, which is a common and valuable auxiliary equipment, may experience several typical issues while it is being used. These issues may include unstable flow, cavitation, seal failure, and other similar issues, which may cause the slurry pump to leak. This problem will still occur after a period of the normal restart, typically as a result of sludge accumulation or other debris in the suction pipeline, even if the slurry pump has normally been operating for a period of time after it has been started, but the current gradually decreases and the flow is obviously insufficient.

After the heavy-duty pump has been assembled, the performance of the sludge pump is next tested by the pump manufacturer to ensure that the pump satisfies the required standards that are outlined in the pump data sheet and in any other procurement documents. After the completion of the hydrostatic casing test, the impeller and rotor dynamic balancing, and the inspection of the casing, the performance test is carried out. After the performance testing is complete, the next steps are the NPSH testing, the machining testing, and finally the final inspection. Testing for vibration is performed in conjunction with testing for performance and testing for machining. In addition to this, you might wish to look at the standard processes for inspecting and testing centrifugal pumps. Let"s have a look at a performance testing scenario. Visit the facility of a pump manufacturer to watch a performance test conducted on a centrifugal pump. This is the point at which an ITP pump is stopped. The pump manufacturer provides the following performance curves once the performance test of the centrifugal pump has been completed. In order to distinguish whether or not the pump has successfully completed the performance evaluation, you will need to compare this curve to the parameters listed on the data sheet. Let"s begin with the vertex capacitance curve. To begin, we will draw a vertical line at 238.5 (on the horizontal axis), which will cross the vertex capacitance curve. Next, we will draw a horizontal line from the intersection, which will cross the vertical axis at 2640. Finally, we will draw a vertical line from the intersection, which will cross the horizontal axis at 238.5 m3/h. The measured vertex is equal to 2640 meters.

The cause of failure in heavy-duty pumps determines whether sludge pump repair will be simple or challenging. There are a wide variety of possibilities as to why the pump is not working. When a septic pump breaks down, one of the most common reasons is that it has been clogged with dirt or grease in the septic tank over time. This can happen for a number of reasons. A pump that is blocked will become inoperable. The majority of people who own rural houses are aware that they should only flush toilet paper and nothing else down the toilet. Guests are sometimes ignorant of this fact, and as a result, they wash off feminine hygiene products, "disposable" wipes, wraps, and other debris that can cause major damage to the sump pump. It is probable that the fault is not with the pump itself but rather with the sensor, depending on the task at hand. It"s possible that the eject buttons, which inform the pump when to turn on and off, are defective, blocked, or moved in some manner. Alternatively, they could just be in the wrong spot. In the end, it"s possible that the issue is not a mechanical one but rather an electrical one. This may indicate that the power supply to your pump is inadequate for some reason, the nature of which is open to interpretation. First, switch off the pump"s electricity to avoid electrocuting it. After that, investigate the problem"s cause. As we"ve said, fixing the pump is easy. If one of your sump pump float controls is obstructed by dirt, reset it. The pump can disassemble and clean itself if clogged with grease or dirt, but most bombs are hefty, and disassembly is tough and complicated. After turning off the electricity, the pump must be removed from the tank. Clean the fan with water to remove debris.

When the sludge pump begins a heavy-duty, but only runs briefly or is overly has noise, there are a few things to examine. Always be cautious when testing components within an electrical system, and cut off the power at the circuit breaker. Contact a specialist if you are unsure if you can do any of these tests safely. There is a list of things that should be examined when a pump that has been running suddenly stops.

When the pump motor trips due to overload, let the pump cool for five to ten minutes before reconnecting it. If the overload happens again, take corrective action. Have an electrician or someone from your power company check and fix the voltage on the branch circuit.

Problems with the motor, such as open motor windings, malfunctions caused by thermal overload, power wires that are disconnected or broken, defective centrifugal switches or relays, or moisture affecting the pump Remove the pump, turn off the power, and turn the rated voltages on and off. essential for control. If it does not function, you should either return it or get a new pump.

The pump entrance plate or housing is scrubbed by the impeller; the power must be turned off, and the pump must be removed from the tank while careful attention is paid to the free movement of the impeller and the shaft. repair or replacement of the pump.

Pump or motor bearings that have become worn or defective: Turn off the power, take the pump out of the tank, make sure the impeller and shaft have enough space to spin freely and think about replacing the bearings in the pump.

Submersible sludge and slurry pumps are built to handle thick, soft, wet mud or other similarly viscous mixtures of liquids and solids, especially the product of an industrial or refining process. Our rentable electric submersible pumps and accessories are designed for an extensive range of dewatering applications, across multiple industries. They provide the performance, reliability, and ease of use you need. Our submersible solids pump lines feature a built-in starter and motor protection system along with optional automatic level control. Adjustable wear-resistant rubber diffusers and hardened high-chrome impellers ensure durability in tough environments.

All models in this range of submersible dewatering pumps have outstanding power to weight ratios. Thanks to the lightweight and compact design the pumps are easy to move around and handle.

JBSL series is designed to handle major heavy duty slurry applications across a very wide range. The excellent Solid handling capability of our channel-impeller pumps guarantees maximum operating time and substantial reductions in maintenance costs caused by pump jamming or clogging and perform very efficient operation.

. Slurry pumps are used widley througout the beneficiation section of mining industry where most plants use wet sepration systems. These systems usually move large volumes of slurry through the process.

. Slurry pumps are alsowidely used for the dispoal of ash from fossil fuel power plants. Other areas where slurry pumps are used include the manufacture of fertilizers, land reclamation, mining by dredges and the long distance transportaion of coal and minerals.

. increased global focus on the environment and energy consumption will certainly generatre much wider user for slurry pumping in years to come.

Plug in without having to worry about overheating. Built-in contactor and thermal sensors protect the motor from overheating. Pumps with a built-in AquaTronic unit will adjust electronically for incorrect phase order, ensuring correct impeller rotation.

The XJS is perfect for pumping sludge and water mixed with solids as it is equipped with a free-flow vortex impeller and a pump volute. The pump design, the robust construction and the premium materials ensure high wear resistance, and the impeller is available in different sizes to meet your specific requirements.

The modular design of the pump range reduces costs by ensuring maximum pump availability with a smaller spare parts inventory. The condition of a pump with a built-in AquaTronic unit can be rapidly checked without disassembly, using its service software.

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, and that’s that you need a heavy duty, high pressure sludge pump. Capable of efficiently handling viscous fluids containing solids, Castle Pumps’ range of slurry pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications. Not all pump designs can do the job, but that’s where we are there to help you. Our technical sales engineers are on hand to help you to select the right solution for your requirements.

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. Pump seat is equipped with four skeleton oil seal and shaft sleeve, prevent shaft wear, prolong the service life of the shaft.

High quality vertical mud pumps with thick, solid shaft and copper motor can be provided in ATO shop. Various models are available, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and 6 inch mud pump. Here is the price list of vertical mud pump.

Sewage mud pump is used in mining, papermaking, printing and dyeing, environmental protection, ceramics, refining, petroleum, chemical industry, farm, dyeing, brewing, food, construction, gold mine, mud, quicksand, mud pond, sewage pond, turbid fluid to send suction thick liquid, loading and suspended matter sewage operation, can also be used for mine drainage and fluid containing mud blocks.

If the mud pump and high-pressure water pump, water gun with the composition of hydraulic mechanized earthwork unit, can be used for land leveling, river and pond dredging, digging and other small water conservancy projects, as well as urban air defense engineering, underground engineering.

The pump volute shall be of cast Iron as per grade FG 260 of IS 210/ISO 186 with vertical discharge port. The pumps shall have non clog semi open impeller with material of construction of Cast Iron (standard supply), CF8 and CF8M, suitable for pumping liquids up to 50 deg. C.

The Pump shaft sealing shall be accomplished with double mechanical shaft seal of material Carbon /Ceramic/NBR/AISI 304 Up to 1 Hp and above 1 Hp the mechanical shaft seal material shall be Sic/Sic /Viton /AISI 316 on the pump side.

The pump shall be close coupled with a dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, epoxy sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged application.

All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Slurry is one of the most challenging fluids to move. It"s highly abrasive, thick, sometimes corrosive, and contains a high concentration of solids. No doubt about it, slurry is tough on pumps. But selecting the right centrifugal pump for these abrasive applications can make all the difference in the long-term performance.

Slurries generally behave the same way as thick, viscous fluids, flowing under gravity, but also pumped as needed. Slurries are divided into two general categories: non-settling or settling.

Non-settling slurries consist of very fine particles, which give the illusion of increased apparent viscosity. These slurries usually have low wearing properties, but do require very careful consideration when selecting the right pump because they do not behave in the same manner as a normal liquid does.

Settling slurries are formed by coarse particles that tend to form an unstable mixture. Particular attention should be given to flow and power calculations when selecting a pump. The majority of slurry applications are made up of coarse particles and because of this, have higher wear properties.

Many types of pumps are used for pumping slurries, but the most common slurry pump is the centrifugal pump. The centrifugal slurry pump uses the centrifugal force generated by a rotating impeller to impact kinetic energy to the slurry, similar to how a water-like liquid would move through a standard centrifugal pump.

Slurry applications greatly reduce the expected wear life of pumping components. It’s critical that pumps designed for these heavy-duty applications are selected from the start. Consider the following when making selections:

To ensure the pump will hold up against abrasive wear, the impeller size/design, material of construction, and discharge configurations must be properly selected.

Open impellers are the most common on slurry pumps because they’re the least likely to clog. Closed impellers on the other hand are the most likely to clog and the most difficult to clean if they clog.

Slurry pumps are generally larger in size when compared to low-viscosity liquid pumps and usually require more horsepower to operate because they"re less efficient. Bearings and shafts must be more rugged and rigid as well.

To protect the pump’s casing from abrasion, slurry pumps are oftentimes lined with metal or rubber. Goulds Pumps, for example, lines their XHD (Extra Heavy Duty) slurry pump with rubber.

The casings are selected to suit the needs of the application. For instance, pumps used in cement production handle fine particles at low pressures. Therefore, a light construction casing is acceptable. If the pump is handling rocks, the pump casing and impeller will need a thicker and stronger casing.

Those with experience pumping slurries know it"s not an easy task. Slurries are heavy and difficult to pump. They cause excessive wear on pumps, their components, and are known to clog suction and discharge lines if not moving fast enough.

It’s a challenge to make slurry centrifugal pumps last for a reasonable amount of time. But, there are a few things you can do to extend the life of your slurry pump and make pumping slurry less of a challenge.

Find the sweet spot that allows the pump to run as slow as possible (to reduce wear), but fast enough to keep solids from settling and clogging the lines

Pumping slurries poses several challenges and problems, but with proper engineering and equipment selection, you can experience many years of worry-free operation. It"s important to work with a qualified engineer when selecting a slurry pump because slurries can wreak havoc on a pump if not properly selected.

Check out the Must-Have Handbook for Centrifugal Pumps for more information on centrifugal pumps, including details about pumps specifically designed for slurry applications!

Engineers and experts rely on Crane Engineering for insight and help with centrifugal pumps to pump slurry. Our in-house team of engineers can answer questions related to not only pumps but valves and skid systems. We provide a complete service and repair team who will fix pumps back to OEM standards. We are ready to assist you, contact us, today whether you"re in Wisconsin, Minnesota, or Michigan