used centerline mud pump quotation
It’s time for piston mud pumps to enter the 21st century. Centerline Mud Pumps utilize common, industry-proven, and easily obtained fluid end parts. Designed to give you better flow capacity, pressure, size and weight advantages, that you won’t find anywhere else. Centerline Mud Pumps are built to exceed the most demanding specifications in the industry. These pumps are built to last.
Centerline Manufacturing is pleased to introduce their line of hydraulic drive mud pumps. Since 1983, Centerline Manufacturing has been involved in the design, manufacture, and production of drilling equipment, support equipment, and tooling for the water well industry. Our line of mud pumps include several new milestone technologies not found anywhere else in the industry.
Provides 150-180* GPM (Gallon Per Minute) of standard mud flow at 350 psi continuous. The 180 GPM is a provisional condition that requires the mud pressure to be below 275 psi and the hydraulic oil temperature below 165 degrees F.
Provides 300-360* GPM (Gallon Per Minute) of standard mud flow at 350 psi Continuous. The 360 GPM is a provisional condition that requires the mud pressure to be below 275 psi and the hydraulic oil temperature below 165 degrees F.
Provides 450-540* GPM (Gallon per Minute) of standard mud flow ar 350 psi Continuous. The 540 GPM is a provisional condition that requires the mud pressure to be below 275 psi and the hydraulic oil temperature below 165 degrees F.
Centerline Manufacturing has been involved in the design, manufacture and production of drilling equipment and tooling for the water well industry. I have had the pleasure of knowing and working with Cory Miller of Centerline Manufacturing over the past 15 years. As the Senior Design Engineer for Ingersoll-Rand’s Deephole Drilling Business Unit, I had the distinct pleasure to work with Cory and integrate his Centerline Mud Pump into our drilling rig platforms. I am recommending Cory for this award and recognition because after decades in this business, I have not seen such an innovative design become a reality and commercialized such as the Centerline Mud Pump.
The true innovation is providing well drillers a size and weight solution for their mud pump requirements. Centerline Mud Pumps integrate into both existing and new drilling rigs. Regardless of drill rig manufacture and hydraulic system design, Centerline provides mud pump integration on hundreds of customer’s drilling rigs. Both Mono Cylinder and Duplex Cylinder Pumps can fit nicely on the deck, across the frame or even under deck mounting configurations. This would not be possible with conventional mud pump designs.
The design features of the Centerline Mud Pump include a matched displacement ratio between the mud pump cylinder and the hydraulic drive cylinder. This is critical to the constant and smooth transition of movement back and forth. It provides a steady discharge flow of mud.
What I dignifies Cory Miller and points to his character? It is how Centerline stuck with their original design through all of the typical trials and tribulations that come with a new product integration. The first several years were challenging. Cory found out that even the best quality hydraulic cylinders and valves and seals were not good enough quality. He then set off on an endeavor to bring everything in house. He began manufacturing all of his own components including hydraulic valves. This gave him complete control over the quality of very component that goes into the Centerline Mud Pump and the finished product.
By the late 90’s, Ingersoll-Rand had tried several times to develop a hydraulic driven mud pump. The goal was to create a mud pump that would last an acceptable life and duty cycle for well drilling contractors. With all of our resources and design wisdom, we were unable to solve this problem. Not only did Cory Miller provide a solution, thus saving the size and weight of a typical gear driven mud pump, he also provided a new offering of a mono cylinder mud pump. This double acting piston pump provided as much mud flow and pressure as a standard 5 X 6 duplex pump. It also came with an incredible size and weight savings.
The second generation design for the Centerline Mud Pump is coming out later in 2018. It will be a true game changer for this industry. It also will open up the application into many other industries that require a heavier duty cycle for a piston pump application.
I have had the unique opportunity to work alongside Cory Miller for many years now. I hope to work alongside him for many more. His innovation and tenacity is infectious. Cory is a true inventor at heart. We are blessed that his passion is focused in the ground water industry. Cory has had a long history of mission work. He recently spent several weeks in Mexico. There, he provided new water wells for small villages and towns that were desperately in need. It is hard to sum up a person as Cory Miller in a few words. However, the best way I know how is to say that he is “Gracious Gentleman known for Innovation and Excellence.”
Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!
Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!
United StatesAfghanistan, Islamic State ofAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaidjanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia-HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCambodia, Kingdom ofCameroonCanadaCape VerdeCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos (Keeling) IslandsColombiaComorosCongoCongo, The Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupe (French)Guam (USA)GuatemalaGuineaGuinea BissauGuyanaHaitiHeard and McDonald IslandsHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsraelItalyIvory Coast (Cote D"Ivoire)JamaicaJapanJordanKazakhstanKenyaKiribatiKuwaitKyrgyz RepublicLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartinique (French)MauritaniaMauritiusMayotteMexicoMicronesiaMoldaviaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNetherlands AntillesNew Caledonia (French)New ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth KoreaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestinian AuthorityPanamaPapua New GuineaParaguayPeruPhilippinesPitcairn IslandPolandPolynesia (French)PortugalQatarReunion (French)RomaniaRussiaRwandaS. Georgia & S. Sandwich Isls.Saint BarthélemySaint HelenaSaint Kitts & Nevis AnguillaSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Tome (Sao Tome) and PrincipeSaint Vincent & GrenadinesSamoaSan MarinoSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovak RepublicSloveniaSolomon IslandsSomaliaSouth AfricaSouth KoreaSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan Mayen IslandsSwazilandSwedenSwitzerlandSyriaTadjikistanTaiwanTanzaniaThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluUgandaUkraineUnited Arab EmiratesUnited KingdomUruguayUzbekistanVanuatuVatican CityVenezuelaVietnamVirgin Islands (British)Virgin Islands (USA)Wallis and Futuna IslandsWestern SaharaYemenZambiaZimbabwe
Manufactured 1998, 1602 hours, 4" plungers with hydraulic charge pump, Detroit Series 50 (rebuilt), 5 speed, Skid mounted with fuel tank, Rebuilt expendables with seals, valves, seats, packings and gaskets. Price: $72,500
Complete without traction motors. 9” bore x 15” stroke, single acting, working pressure up to 7500 psi, (3) interchangeable forged steel fluid end modules with separate suction and discharge sections, Premium grade fluid end expendables with 6-1/2” pistons and liners, suction manifold with (3) 12” flanged inlets, SD8 suction desurger, pressure manifold with (2) 5-1/8” 10,000# API flanged outlets, liner wash system, 1 x 1-1/2” mission centrifugal pump p/b 3 hp electric motor, external power end lubrication pump, steel skid, suction line pressure relief valve, set of standard service tools Price: $675,000
Manufactured 2017, 150 GPM, 400 PSI, Centerline Mono, used for one job to go to 200’ to pump water, unmounted, no engine, like new condition Price: $26,500
CENTERLINE 7-1/2 X 10 MUD PUMP(Ref#14556Tb) high pressure, no engine, needs retaining liner cage and (1) side suction manifold needs replacing, unmounted Price: $39,500
3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6-3/4", stroke 10", 10,000 PSI hydrostatic pressure of standard cylinder. 2.853 ratio of gears. 10" suction connection, 6" discharge connection. Valve pot mod .7., steel fluid ends, 5,000 psi pulsation dampener. Oilfield skid mounted. Performance Data: at 120 strokes per minute with 6-3/4" liners, pump will produce 4305 PSI and 574gpm. Set up for electric power. Dimensions and weight: 84,000 lbs, 209"L x 113"W x 75"H. Built 1976. Located India, removed from offshore drilling rig. Price: $75,000 each
approx. 7000 hours, Cat 3512C (1476 hp), 5000 psi fluid end cylinder, 5-1/2" piston cylinder, antifreeze heaters, WPT W21-CG-300 Type 1 PTO clutch, 16 grooove drive sheave, 16 groove bullwheel, 16 groove Kevlar belt with necessary guards, 5 x 6 x 11 charge pump c/w 50 hp@1200 rpm electric motor. Discharge plumbing: 2" 5M XXH B/W Oteco gate valve, 4" 5M XXH b/w Oteco gate valve, 3" 5M Oteco popoff valve w/1502 connection, 2" 5M type D Oteco mud gauge with 1502 connection, Hydril 20 gal 5M pulsation damper. Mounted on oilfield skid with separate, with expendables cabinet, knowledge box and removable engine skid for breaking the engine and pump into separate smaller loads. Winterization package, oilfield lighting, explosion proof starters for charge pump, rod oiler pump and liner wash pumps. Price: $695,000 - Make Offer
Two Available, each complete with Cat 3508 diesel engines, pulsation dampener, and mud tanks with desander, desilter, etc. Price for Package: $110,000
Cat 3408 engine air start with pump drive and belt guard, PD55 Hydril dampener, 750 gallon fuel tank, mounted on heavy duty drop deck tandem trailer, low hours Price: $87,500
14" stroke, 2" rod size, 400 hp, 75 strokes per minute, cast fluid ends, unitized on oilfield skid with Cat 3406 diesel engines, air start, new filters, oil and coolant, air receiver on deck, fluorescent lighting, drive belts with air clutch. Gone over and in good operating condition, ready to be put into service. Pumps currently have new 6" liners with production being 480 gpm @ 1000 psi. All fluid end parts are brand new and never used, including the valves, gears, liners, pistons, rods, head gasket, and rod packing, equipped with pulsation dampener. 32" long x 11" wide x 7" high 50,000# weight
GARDNER DENVER TEE MUD PUMP(Ref#6440T) New, unused, manufactured 2014, 4 available, bare pumps Price: $39,500 each New Cat C7 engines available at additional cost
Pump only. 5" stroke, 300 hp, steel billet fluid end, 2-3/4" ceramic plungers, Delrim disc valves, 838 packing, 6" RF suction connection, 3" RTJ discharge connection, 231 gpm max, 2020 psi, max 360 rpm Price: $82,500
Two available, rebuilt, cast ductile iron fluid ends, used for oil service, bare pumps, no engines, unmounted, one is flanged for suction/discharge, one is threaded Price: $20,000 each
Cummins 150 hp reconditioned engine with snap-in clutch, 90 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, 4’ back up drill pipe bumper guard, front and rear loading hitches, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard Price: $82,500
Detroit 671 engine with Snap-In clutch (Gen Set approx. 1500 hours), replaced fluid end parts with 4” liners, mounted on 8’ x 12’ trailer with adjustable pintle and DOT lighting, 75 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard, 2’ x 2’ x 5’ lockable HD toolbox, mouting beams and steel/bolts Price: $41,500
Air driven, used with cement for grouting wells, sitting 3-4 years, valves will need rebuilding, trailer mounted, air over hydraulic brakes, includes 28 joints of 21’ pipe Price: $39,500
8" x 17" base (mud boat), John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank, Dayton oiler pump system and tank, 4" suction hose and winch boom, 4" backup drill pipe bumper guard, front and rear loading hitches, 42" bull wheel with power band belt, belt guard Price: $99,000 PRICE REDUCED: $73,500
750 hp, 8" stroke, 6" suction inlet, 4" discharge outlet, piston size 4-1/2" - 7", max rod load 85,000#, approx. weight 11,500#, lubrication force fed, steel pump power end, double helical gears, 4.95:1 gear ratio, rod bearings sheel type replaceable, main bearings straight roler, pinion bearings spherical roller, crankshaft 1pc forged alloy steel, connecting rod knuckle joint, crosshead guide bronze replaceable, piston type fluid end Monoblock design, from high strength alloy steel, treated and sonic tested, Cat D379 diesel engine, 500 HP max linear bore size 3-1/2 - 6-1/4 x 7-3/4" stroke, test pressure 10,000 psi, gear ratio 2.742.8" suction line to 4 discharge stroke, location South America Price: $110,000
Two available, Skidded, Detroit Series 60 diesel engine DDEC V (475 hp), Allison 750 (6-speed) transmission with lock up control pane, Mission 4 x 5 centrifugal suction pump, 4” plungers, pulsation dampener, pressure gauge, safety valve, 10,000 psi fluid end, 5000 psi working pressure, NOV plug valve control manifold (4-valve) configured for 15k operation. Can be configured to kill wells, acidize, cement, reverse circulate, drill out frac plugs or run in tandem. Self-contained with fuel and fluid tanks and controls. Steel canopy over skids, covered battery boxes, new batteries and disconnect switches. Well maintained and in excellent condition. Low hours on pumps and motors. Ready to work. Price: $154,500 each
1600 hp, 12" stroke, 5000 psi, pulsation dampeners, pop off pressure release valve, pump pressure gauge, forged discharge manifold, overhead track for chain hoist, mounted on shipping skid, line washer pump, 6" liners, overall size: 192 x 128 x 105-3/4", inspection report available Price: $137,500
14 liter Detroit Diesel, 6061 Allison automatic transmission, rebuilt power end, new expendables in fluid end, new charge pump, skid, tanks, Pilfer 5 valve manifold, 15k fluid end, new paint Price: $215,000
Manufactured 1999, 1000 gal holding tank, (2) 3 x 4 Mission Magnum pumps with mechanical seals, MC255-2C mud cleaner, sand guzzler, Versa-drill rig jacks, Perkisn engine, spare hyd pump and filters, well maintained, ready to work Price: $59,500PRICE REDUCED: $49,500
Mounted on 12K GVRW trailer, hydraulic powered spool with approximately 500 of 2” hose, internally routed power and safety cable, 7.5 HP pump and motor, Whisper Watt 25kva 3-phase diesel generator with approx. 3100 hours Price: $45,000
We offer a vast range of new and used well drilling equipment, well drilling services rigs, pump hoist rigs, mud pump systems, and lifting tools. Our online listing of well drilling equipment is updated regularly to provide you with the most current information on well drilling rigs and well drilling equipment that we have available. If you are unable to locate the information you are looking for, we still may be able to accommodate you, so please contact us for assistance.
Drilling Equipment Sales, Inc. is the premier dealer for well drilling equipment; whether you are seeking new or used equipment we will work to accommodate your needs. We offer a wide variety of new and used well drilling equipment manufactured by Atlas Copco, Centerline, Driltech, Failing, Flatwater, Freightliner, Gus Pech, Ingersoll-Rand, Mudslayer, Pulstar, REICHdrill, Rose-Wall, Hunke, Smeal, and Walker Neer.
We provide a variety of drilling equipment and rigs from quality manufacturers in the industry. Drilling Equipment Sales, Inc. offers new and used equipment so that all of your drilling equipment can be met. If you need well drilling equipment, well drilling service rigs, mud pump systems or pump hoist rigs, Drilling Equipment Sales, Inc. can provide all of this and more.
Whether onshore or offshore, well drilling sites rely on a multitude of systems to successfully perform the drilling operation. The mud pump is a key component tasked with circulating drilling fluid under high pressure downhole. The mud pump can be divided into two key sections: the power end or crosshead and the fluid end. Proper alignment of the pump’s crosshead to the fluid end liner is necessary to maximizing piston and liner life. Misalignment contributes to
accelerated wear on both the piston and the liner, and replacing these components requires downtime of the pump. Traditional methods of inspecting alignment range from using uncalibrated wooden rods, Faro Arms and micrometers to check the vertical and horizontal alignment of the piston rod OD to the piston liner ID. These are time consuming and cumbersome techniques that are ultimately not well suited to troubleshoot and solve alignment issues.
A “Mud Pump Laser Alignment Kit” enables you to measure where the piston will run through the liner at various positions along the pump’s stroke. It will also project a laser centerline from the fluid end back towards the rear power end of the pump that can be used to determine how much shimming is required to correct any alignment issues. The kit can include either a 2-Axis receiver or a 4-Axis which accepts the laser beam and documents where it falls on the active surface of the receiver. The 4-Axis receiver can decrease alignment time by as much as 50% as it will measure angularity as well as X and Y while the 2-Axis does not and will need multiple measurement locations to get the same information. In addition, the alignment system is a non-intrusive service requiring the removal of only the piston rod which allows for much quicker service and less down time on the pump. As the mud pumps in question are located globally both on and offshore, having a small, portable system is another great advantage. Our recommendation would be Pinpoint laser System’s “Mud Pump Alignment Kit”. They are being used by many of the leading repair service companies and have been their main alignment tool for over 15 years. Manufacturers are also utilizing these for new pump set-up.
Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. For process applications, dewatering, irrigation, chemical transfer, and other industrial applications. Top centerline discharge similar to many ANSI and ISO dimensional process pumps. Benefits include:
High quality premium efficiency TEFC electric motors, designed and developed in accordance with industry standards for industry standards for industrial and commercial pumping applications
The GT635 Geothermal Drilling Rig in operation showcasing a mud drilling setup with an auger drilling pipe, using a submersible sand guzzler (hydraulic driven, pick-up-pump designed for the water well driller). This pump is capable of lifting up to 500 GPM of return drilling mud, as well as solids as large as 1"(2.5cm), to a shaker or tank. The unit won"t air lock a
Ratings published here in are intended to be used only for preliminary planning purposes, and as such carried no warranties whatsoever. All applications for gas opines must be approved in writing. THE INFORMATION CONTAINED HERE IS TRANSCRIBED FROM A GASO TECHNICAL MANUAL FROMM THE 1960âS - 70âS. IEQ INDUSTRIES OR THE CUSTODIANS OF THIS WEBSITE ARE NOT RESPONSIBLE FOR ITS CONTENT.
GASO pumps are engineered to deliver the book plus values which have distinguished GASO pumps for over 60 years and to provide longer life and lower maintenance costs. Important design features include:
Connecting Rods. All triplex plunger pumps are equipped with H type construction rods, with renewable Babbit lined steel backed shell bearings at the crank end and bronze bushings at crosshead end.
Crossheads. Figures 3088, and series 3200, 3300, 313, 3400, 3800, 3900, 3600 and 3700 pumps are furnished with cylindrical type high-strength alloy castings. Series 3500 pumps are furnished with semi-cylindrical typecasting. Cross head tends are hardened and ground steel.
Lubrication. All power and parts are lubricated by splash system from oil in the crankcase reservoir. Power frame has an oil return channel, from front of the cross heads back to the crankcase, to permit constant circulation of oil and to help keep oil cool. Positive power and lubrication is optional for series 3700 pumps.
Stuffing Boxes. Figures 3088 and series 3200, 3300, 3400, 3500, 3800, and 3900 pumps are furnished with double lip âUâ cup packings. Series 3630 700 pumps are furnished with a set of four non-crushable lip type packing rings.
FLUID END BODY. Alloys which are stocked our Molybnenum alloy iron for crude oil and freshwater service, and steel for pumping petroleum products in hazardous locations. Aluminum bronze alloys are used for salt water and other corrosive liquids. Special alloys such as Hastalloy C, Inconel or stainless steel can be furnished upon request.
VALVES. Figure 3211 and 3364 pumps are furnished standard with wing guided type valves and seats. Figures 3365, 3088 and series 3113, 3400, 3500, 3800, 3900, 3630 700 pumps are furnished with stem guided disk type valve assemblies.
CYLINDER HEADS AND VALVE COVERS. 3211 and 3364 pumps with aluminum bronze and Molybdenum alloy fluid ends have threaded valve covers and cylinder heads, all other our bolt on type.
STUFFING BOXES. All triplex pump boxes, with the exception of figures 3088, 3583, and series 3900, 3630 3700 pumps, are board directly into the fluid body. Stuffing boxes are for figures 3088, nerdy 3583 and series 3800, 3900, 3630 and 3700 pumps are replaceable type.
PlLUNGER LUBRICATION. Furnished by use of grip oilers or regulated flow of oil from a force-feed"s lubricator. Lubricate or is mounted on the pump with separate oil lines to each plunger.
I have 2 fully rebuilt top to bottom 4” flygt pumps, these pumps are fully submersible with being able to pump Water, waste water, low-high viscosity mud and mud with solids/shale. I’ve built guards so that nothing bigger can get it pump and jam it. I have paperwork for the rebuilds this March. 2022, they HAVE NOT been used since rebuilds only for deadhead pressure test. 120ft of cord. With a on/off switch at 20’ from pump 3/phase 480volt 10hp 1735rpm Both pumps have a dead head pressure at ...
I have 2 fully rebuilt top to bottom 4” flygt pumps, these pumps are fully submersible with being able to pump Water, waste water, low-high viscosity mud and mud with solids/shale. I’ve built guards so that nothing bigger can get it pump and jam it. I have paperwork for the rebuilds this March. 2022, they HAVE NOT been used since rebuilds only for deadhead pressure test. 120ft of cord. With a on/off switch at 20’ from pump 3/phase 480volt 10hp 1735rpm Both pumps have a dead head pressure at ...
Looking to sell, or trade for other drywall tools like a regular size mud pump, 2.5" angle head, maybe other items, willing to add or receive cash on a trade I bought this pump used a year ago when I was looking to get into the drywall trade, and to do some work on my house. It was primed and pumped mud when I bought it, I took it apart, cleaned everything, reassembled and tested with water I am an average joe looking to do occasional drywall work, so I am looking to trade for a regular size ...
2018 Argo Avenger ST 8x8 30 HP Kohler ELH775 High torque Admiral transmission - New transmission at 912 hours ROPS 18" Rubber tracks Winch Mud flaps Offset wheels Bilge pump 4573 KM 913 Hrs Service work completed at 912 hours - Left and right front and mid chains - Drive belt - Admiral transmission replaced - Idler shaft bearings This machine is in great shape, and ready to ride! Always serviced by experienced Argo technicians. Contact Colton - Ron"s Rentals Fort Saskatchewan 780-278-5559 GST ...
The CLM 7½" x 10" Duplex Hydraulic Mud Pump. Pump is fully operational mounted on drilling rig when purchased the rig and not being used (air drilling only), will be removing from rig shortly. Video of pump operation upon request. Will include discharge piping with valves, manifold, PRV etc. Specifications: 300 GPM displacement @ 800 PSI 40 strokes/minute 77.3" long x 34" wide x 32" high Weight 1350 lbs.
The CLM 7½" x 10" Duplex Hydraulic Mud Pump. Pump is fully operational mounted on drilling rig when purchased the rig and not being used (air drilling only), will be removing from rig shortly. Video of pump operation upon request. Will include discharge piping with valves, manifold, PRV etc. Specifications: 300 GPM displacement @ 800 PSI 40 strokes/minute 77.3" long x 34" wide x 32" high Weight 1350 lbs.
2017 Argo Avenger ST 8x8 30 HP Kohler ELH775 High torque Admiral transmission ROPS 18" Rubber tracks Rear bench seat 4,000 LB Winch Mud flaps Offset wheels Bilge pump 5246 KM 1026 Hrs This machine has been fully inspected and serviced. It is ready to ride! Contact Colton - Ron"s Rentals Fort Saskatchewan 780 278 5559 GST will apply. Financing Available!
FMC Tech. Bean Piston Mud Pump for Ditch Witch JT2020 $13,950 CAD + Applicable Taxes & Fees Model: L0618COMP Reduced Cost Of Ownership Easy To Maintain (Less Downtime) High Volumetric Efficiency Splined Crankshafts And Hydraulic Motor Mounts Available On All Models Heavy Duty Cast Iron Power Frames Variety Of Fluid End Components Available To Meet Demanding Applications Rated Conditions Power: 22 hp Dis. Press.: 1500 psi Flow Rate: 35 gpm Speed: 452 Crank rpm True North HDD is your source for ...
1995 Ingersoll Rand TH60 water well drilling rig -International Paystar, with Cummins N14 -750cfm - 350psi air compressor -13x4x3 mud pump -set up for 3.5" pipe with 9 rod carousel and rod box -In great shape, and well maintained -newer mud pump -newer spicer drop box transfer case -rebuilt most hydraulics, cylinders, top drive motors, derrick cylinders, top drive feed cylinder, etc -Webasto -All oils changed regularly, ready for work -no pipe or tooling Located in Central Alberta Canada Asking ...
I Almost new GD triplex mud pump with series 50 Detroit engine. Allison Powershift 7 speed transmission. Pump was purchased new in 2012 and has 1200 hours on pump Itself. Max pump volume is 1.7 cubes per minute at 720 psi. Come with drive hydraulic charge pump to charge triplex. Also has a 5x6 electric driven 50 hp motor mixing pump. Pump has chain drive with hydraulic lubricator pump and piston swab lube pump Building is 12’ x 19’ self contained complete pump system, ready to work Have videos ...
Description Specifications: - New Winderosa Mechanical Water Pump Seal Applications: 2010 Arctic Cat 650 4x4 H1 Mud Pro 650cc 2011 Arctic Cat 650 4x4 H1 Mud Pro 650cc Can"t find the part number you"re looking for? Try Our Advanced Part Finder
MT653 Powershift Allison transmission. Has 1200 hours on it, used to drive a mud pump. Comes with shifter tower and 6 speed shifter, oil cooler and filter. Do have skid frame if interested Call or text if any questions, located in Rockyview County
STS M-300 Mud Mixing System $5900 CAD + applicable taxes & fees Hopper Height: 34.5 in. Mixing Tank: 300 gal Polyethylene Skid Frame: 4” Steel Channel, welded Engine: 9.0 hp Air-Cooled Pump: 3 in. Cast Iron Centrifugal Trash Pump Pump Drive: Direct Coupled Engine To Pump High-Pressure Pump: Diaphragm - 1000 psi @ 8 gpm Pump Drive: Electric Clutch PTO Battery: 550 amp. Deep Cycle Marine Fuel Tank: 15 gal. Steel C/W Sight Gauge Pipe Couplers: Bolt & Snap-Groove Type Pressure Wand: Hopper ...
Working daily. 2007 kenworth T300, c7 cat 10 speed with a mayhew 1000 rotary mud rig. All new in 2016- bearings, chains, 5x6 mud pump, hydraulic hoses, hydraulic pump, drawworks and cluthes. Power end on mud pump redone in spring of 2022. No air compressor. New drill stem in 2017 ( 420") 20" lengths. Includes extra fluid end consumable parts, tricone bits, step bits and subs, extra mud pump housing and more. 68,000 original km, 15,000+ hours, bottom end done in 2016 as well as injectors and oil ...
Designed to fit these 30 gallon barrels perfectly. This loading pump distributes more mud with less pumps, filling your tools in half the time, saving you time and improving productivity. This pump allows you to fill your tools standing up, no more bending over. Features: -Longer tube holds more mud, to fill your
COLUMBIA TALL BOY LOADING PUMP The Columbia Tall Boy Pump is a BIG step up from a standard sized drywall mud pump. Size really does matter This taller pump allows you to stand comfortably upright while you fill your tools. Stand Tall When filling the automatic taper you can see the piston, and you no longer need
All CategoriesAir compressors (2)Air compressor (1)Screw air (1)Attachments (2)Bucket (1)Screen (1)Backhoes (1)Excavators (1)Compactors (2)Compactor (1)Roller (1)Drill Rigs (1)Drilling (18)Brakes (1)Cat walk (1)Drilling Rig (1)Equipment (5)Mud Pits (3)Pipe wrangler (1)Pumps (3)Solids separation (3)Electrical Equipment (4)Circuit Breaker (1)Cutler Hammer (1)Eaton (1)Switchgear (1)Engines (24)Cores (2)Diesel (7)Drilling (2)Drilling Rig (1)Engine (5)Equipment (2)Natural Gas (2)Oilfield (1)Pump drive (1)Pumps (1)Generators (18)Cat (3)Diesel (7)Generator (7)John Deere (1)Heaters (3)Air heater (1)Blower (1)Indirect fired heater (1)Iron (2)Pipe (1)Sucker Rod (1)Man Camps (3)Man Camp (2)Rig House (1)Mud Pumps (27)1000hp (4)Cat (1)Diesel (2)Drilling (1)Emsco (3)Engine (1)Equipment (1)Mud pump (7)Pump (7)Natural Gas Compression (10)Compressor Station (3)Engine (1)Frick (2)Natural Gas (3)Waukesha (1)Oil Field (5)Bathroom (1)Shipping container (1)Substructure (1)Support Equipment (1)Tanks (1)Production (3)Injection (1)Pump (1)Pumping Unit (1)Rigs (1)Swabbing Unit (1)Road Graders (3)Blade (1)Road Grader (1)Service Trucks (1)Service Truck (1)Silos (2)Sand silos (1)Tanks (1)Support Equipment (19)Accumulator (3)Cat walk (1)Closing Unit (2)Drilling Rig (2)HPU (1)Koomey (2)Kubota (1)Mud pump (1)Oilfield (1)Pipe handling (1)Pipe rack (1)Pipe wrangler (1)Power Swivel (1)Tanks (1)Telehandler (4)Cat (1)Forklift (1)Reachlift (1)Telehandler (1)Trailer (4)Flatbed (1)Gooseneck (1)Step deck (1)Trailer (1)Valves (82)
Discharge Head: This is the vertical distance that you are able to pump liquid. For example, if your pump is rated for a maximum head of 18 feet, this does not mean that you are restricted to 18 feet of pipe. You can use 300 feet, so long as the final discharge point is not higher than 18 feet above the liquid being pumped.
Suction Lift: This is the vertical distance that the pump can be above the liquid source. Typically, atmospheric pressure limits vertical suction lift of pumps to 25 feet at sea level. This does not mean that you are limited to 25 feet of pipe. You could use upwards of 300 feet of suction pipe, so long as the liquid source is not lower than 25 feet below the pump center line.
8613371530291