valve seat puller mud pump made in china

There are three types of pumps, such as mud pump pullers, and mud pump seat pullers. Firstly, there are a variety of pumps such as electric mud pump pullers and mud pump pullers. Depending on the type of pumps, they are handy and can be found in the form of a pull bar or on the back of the vehicle. You can find a variety of pumps for pumps, such as electric mud pump pullers and dirt pump pullers, in the form of mud pump pullers, which are usually found in the form of a curved mud pump puller, also called mud pump pullers and mud pump pullers. One of the most common types of pumps is mud pump pullers, also known as mud suction pullers and mud pump pullers.@@@@@

Similarly, the pistonumatic is commonly adjusted by pumps. There is also a mud pump puller called the pistonumatic, and is commonly adjusted by pumps. If mud is a aft of mud pump from puller to mud truck pump pullers, this can also be the pistonumatic hand puller, or the other type of puller on the road. You can find a multifunctional mud pump puller and mud tire puller from Alibaba.com, which also available in the form of a pistonumatic hand puller, or by the name of the type it is.

Valve seat extruder also called “Valve Seat Puller” is a service tool, which is used in the drilling sites for pulling the installed valve seats from mud pump fluid end module. During the process of replacing the valves seat and maintaining the mud pumps, this tool will be more effective to finish the maintance work with fewer manpower and shorter time.

The puller assembly can exert a force of over 200,000 lb on the valve seats. The complete comes with a hose so that the hand operated hydraulic pump can be placed at a safe distance from the mud pump during pulling operations. The hose, puller assembly, and pump are equipped with quick disconnect couplings for easy handling. The pump comes complete with a pressure gauge. The numerically controlled machined and heat treated puller head of high alloy steel offer maximum strength without the stress concentration characteristic of torch burned heads. The components are made from high quality cast steel for impact and wear resistance.

Hydraulic pull valve is an indispensable tool for mud pump, which is used to pull the seat. When in use, remove the valve cover from the liquid cylinder top, will hook assembly through the valve seat hole, hook head step stuck seat, is respectively in the screw sleeve into the support seat, cylinder block, cylinder head, triangle, the supporting seat is clamped in the liquid cylinder holes in the triangle, the whole system will be tightened. Then by hand pressure pump through the oil inlet nozzle injection pressure, the pressure drop from the top of cylinder cover, cylinder cover to push the triangle to move, to drive a hook assembly moves through the screw, pull the seat.

We are a professional supplier of mud pump liners that used on all kinds of mud pumps incluing: China F series Mud Pumps(made by BOMCO, RG, RONGLI, RONGSHENG, HONGHUA), China 3NB series Mud Pumps(made by Lanzhou, Qingzhou), EMSCO, GARDNER DENVER, NATIONAL, OILWELL, IDECO etc.China F series Mud Pump:F-500, F-800/1000, F-1300/1600China 3NB series Mud Pump:3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600EMSCO:F-350, F-500, F-650, F-800, F-1000, FA-1300, FB-1300, FA-1600, FB-1600GARDNER DENVER:PZ-7, PZ-8/9, PZ-10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXPNATIONAL:7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400OILWELL:A-560/600-PT,A-850-PT/A-1100-PT, A-1700-PT/A-1400-PTIDECO:T-500, T-800, T-1000, T-1300, T-1600

Dezhou Rundong Petroleum Machinery Co., Ltd is major in manufacturing oil drilling mud pump spare parts and drilling tools, in which liners, pistons and valves that developed new have got national patent certificate. Mud pump parts we manufactured can be totally exchangeable with spare parts from original manufacturer, and have excellent performance especially in drilling conditions of high temperature, high pressure, oil base mud, acid base mud and high sand content mud etc.

We have been committed to continuous optimization and upgrading of drilling mud pump products.We accumulate rich first-hand technical information through our service to drilling projects, for example different material products’ performance under different drilling conditions. Our aim is to make products manufactured can be more suitable for oilfield drilling needs, and our goal is where there is oil, there is Deshi Brand products.

Main advantages of the mud pump consumables that we manufacturedProducts are produced according to ISO9001 quality system,APISpec7K standard, and each process can be tracked, recorded and traceable

Import spare parts such as valve module, crankshaft, pinion shaft’s material are high quality alloy steel,The power end herringbone gear adopts the grinding process, the gear precision is high, the processing precision of the matching components is much more higher, which can make the whole mud pump can run more smoothly.

F500、F800 、F1000、F1300、 F1600、F-1600HL 、F-2200HLHydraulic end products and power end productsModule, Liner, Piston, Valve body, valve seat, piston rod, pony rod, flanges, crosshead assy, air capsule, crankshaft, pinion shaft, connecting rod, manifold etc

HHF-1300、HHF-1600 、HH3NB-1600H、HH3NB-2200HLHydraulic end products and power end productsModule, Liner, Piston, Valve body, valve seat, piston rod, pony rod, flanges, crosshead assy, air capsule, crankshaft, pinion shaft, connecting rod, manifold etc

7P-50、8P-80、9P-100、10P-130、12P-160、14P-220Hydraulic end products and power end productsModule, Liner, Piston, Valve body, valve seat, piston rod, pony rod, flanges, air capsule, manifold etc

PZ-7、 PZ-8、 PZ-9 、PZ-10、PZ-11Hydraulic end productsModule, Liner, Piston, Valve body, valve seat, piston rod, pony rod, flanges, air capsule, manifold etc

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

Dec092015SPARES FOR GARDNER DENVER MAKE PZ-9 MUD PUMPS (PO NO -4050009999) - VALVE SEAT PULLER (PART NO - 100E12)United StatesBombay SeaNOS1462,362462,362

Sep152015SPARES OF WHITE STAR MAKE MUD PUMP - HYD SEAT PULLER (PARTNO - 9772-UT-HYD-PUL) (MATERIAL CODE - 210012592)United StatesNhava Sheva SeaNOS2712,218356,109

Feb132015SEAT PULLER - SPARE PARTS OF MUD PUMP (DRILLING PURPOSE) ASPER DGH CERTIFICATE NO. ECIN201412260018 DT. 02/01/2015ChinaNhava Sheva SeaSET297,47648,738

Baoshan mainly produce the replacement parts for oil&gas drilling and well service mud pump and plunger pump, such as fluid end module, liner, valve&seat, piston, piton rod, clamp, pony rod, plunger, crankshaft, pinion shaft, gear, crosshead, connecting rod, pulsation dampener, safety valve, and so on. every part we make is strictly according to api standard , and is completely exchangeable with original parts of many famous brands of pump, such as national, oilwell, emsco, ideco, gardner denver, bomco, honghua, tsc, uralmash, halliburton, spm, serva, jereh, and so on.

TianyuMfg made valve seat puller is easy to use and maintenance. You just need to put the clapper into the valve seat, then screw into the lead screw, place the actuator through the lead screw onto the cylinder, screw into the nut, and operate the hand pump, then you can easily remove valve seats.