valve seat puller mud pump price

Valve seat extruder also called “Valve Seat Puller” is a service tool, which is used in the drilling sites for pulling the installed valve seats from mud pump fluid end module. During the process of replacing the valves seat and maintaining the mud pumps, this tool will be more effective to finish the maintance work with fewer manpower and shorter time.

The puller assembly can exert a force of over 200,000 lb on the valve seats. The complete comes with a hose so that the hand operated hydraulic pump can be placed at a safe distance from the mud pump during pulling operations. The hose, puller assembly, and pump are equipped with quick disconnect couplings for easy handling. The pump comes complete with a pressure gauge. The numerically controlled machined and heat treated puller head of high alloy steel offer maximum strength without the stress concentration characteristic of torch burned heads. The components are made from high quality cast steel for impact and wear resistance.

Parts are available for Emsco/Bomco, National, Oilwell, Gardner Denver, Ideco, Weatherford/Ellis Williams, Mud King, LS National,Southwest, Baker, Russia, Wirth,OPI, Drillmec, Skytop/Brewster.

Our Seat Pullers and Kits is designed to be used a variety of valve seat puller heads (sold separately).Pulls seat safely, quickly, and efficiently no chance of damage to seat deck

It is used to take the installed mud pump valve seat out of the mud pump fluid end module, during the process of replacing the valve seat or mud pump maintenance. At the same time, eliminate damage to fluid end expendables caused by removing the valve seat with a cutting torch.

It consists of an oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc. This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time.

It is suitable for API#4 valve seat, API#5 valve seat, API#6 valve seat, and API#7 valve seat. Mud pump valve seat puller for 3-WEB valve seat, 4-WEB valve seat, and FULL OPEN valve seat can all be provided.

A seat puller is a removal tool in a mud pump. It is used to remove the installed valve seat from the fluid pump module of the mud pump during the replacement of the mud pump fluid end valve body, valve seat, or maintenance of the mud pump. It consists of an oil cylinder, hydraulic manual pump assembly, full-threaded rod, claw head, pressure gauge, tee and so on.

HVSP120 BVA, VALVE SEAT PULLER, FRAC PUMP MAINTENANCE, 120 TON CYLINDER CAPACITY, 2.13" CENTER HOLE ID, 0.607" STROKE, 3.63" COLLAPSED HEIGHT. HVSP120 BVA