vermeer 24x40 mud pump pricelist

This mud pump will deliver the consistent flow of drilling fluid that is vital to HDD pipeline drilling projects. Suction inlet valve suspends charged flow during drill rod makeup and breakout process, keeping excess drilling fluid from escaping as drill pipes separate. The lubrication pump is driven off the auxiliary pad on the engine. It provides 55 psi (3.8 bar) of continuous crankshaft lubrication. The internal hydraulic reservoir has a capacity of 49 gal (185.5 L). Clutch with continuous duty throw-out bearing allows for longer pump disengagement during drill rod makeup/breakout....

A triplex piston pump produces up to 435.3 gpm (1647.8 L/min), providing a continuous flow of drilling fluid during drill operations. An electric centrifugal pump provides constant flow, keeping the pump running cool and leading to a longer life for both pistons and liners. Remote pendant control allows operator to mount controls where it makes sense for them. The remote pendant control monitors mud rate and eliminates the need for stroke counter. The integrated liner wash tank eliminates the need for additional water containers or electricity when running the pump. An engine-mounted air...

Find used Vermeer Directional Drills (HDD) For Sale by owners and dealers near you on MyLittleSalesman.com. Browse over 26 Vermeer Directional Drills (HDD) For Sale, compare prices, and save. Use the buttons below to sort or filter your search results by model, year, price, location, and more.

1101-042 – Vermeer®-Compatible Drill Pipe, 1.66" FS1 x 6 ft., 7×11/9×13 – Call for price, 1101-043 – Vermeer®-Compatible Drill Pipe, 1.90" FS1 x 10 ft., 16×20/18×22 – Call for price, 1101-044 – Vermeer®-Compatible Drill Pipe, 2.06" FS1 x 10 ft., 20×22/24×26 – Call for price, 1101-028 – Vermeer®-Compatible Drill Pipe, 2.375" FS1 x 10 ft., 24×40 – Call for Price, 1101-045 – Vermeer®-Compatible Drill Pipe, 2.375" FS650 x 10 ft., 36×50 – Call for price, 1101-046 – Vermeer®-Compatible Drill Pipe, 2.375" FS650 x 15 ft., 36×50 – Call for price, 1101-047 – Vermeer®-Compatible Drill Pipe, 2.625" FS700 x 10 ft., 36×50 – Call for price, 1101-048 – Vermeer®-Compatible Drill Pipe, 2.625" FS700 x 15 ft., 36×50 – Call for price, 1101-049 – Vermeer®-Compatible Drill Pipe, 2.875" FS1 x 15 ft., 50×100/60×90 – Call for price, 1101-050 – Vermeer®-Compatible Drill Pipe, 3.50" FS1 x 15 ft., 50×100/80×100 – Call for price, 1101-051 – Vermeer®-Compatible Drill Pipe, 3.50" FS1000 x 20 ft., 100×120 – Call for price

UNIVERSAL250 x 400 HORIZONTAL DIRECTIONAL DRILL(Ref#5559R)  Manufactured 2012, 1100 hours, 250,000# of thrust, 40,000# of rotation, 400 hp John Deere Turbo engine, Keer mud pump rated at 325 gpm, 6000# hyd crane and hyd rod loader w/2 remotes, 2 person cab, Digitrak  Price:  $745,000

UNIVERSAL 45 X 65 DIRECTIONAL DRILL(Ref#12438T)  Built 2018, 1 owner diesel engine, built in DCI locating device, enclosed cab with heat and A/C, (2) rod baskets with 1000’ of rod, 10’ rods with 900 Vermeer threads  Price:  $300,000

DITCH WITCH JT2020 DRILL(Ref#3396T)  Manufactured 2011, (one owner/operator since new), tools, reamers, Subsite TK locator and remote display, FM5 mud mixing machine, 600’ drill stem

DITCHWITCH  JT520(Ref#9022T)  Manufactured 2005, Kabuta 3 cylinder engine, 150’ drill stem, 300 gallon mud mixing system with Honda 5 hp engine, drill head, complete located system, turn key complete package, located Canada  POR

VERMEER D16X20A(Ref#5517N)  Manufactured 2004, Kubota diesel engine, 400’ of Firestick rods, rod loader, remote lockout, good condition  Price:  $70,000

VERMEER 16X20 NAVIGATION BORING UNIT(Ref#3065Na)  Manufactured 2001, diesel engine, mixing system, trailer, 500’ of 10’ rods, 1 drill head sone, ready to go, 20’ tandem axle trailer    PRICE:  $36,500

VERMEER 16X20(Ref#15622RB) Manufactured 1998, self contained unit with diesel engine, locating system, full rack of rods, no mud system, ready to go  Price on Request

VERMEER D24(Ref#11885N)  Manufactured 1992, one owner rig, 6 cyl John Deere diesel engine, trailer mounted, Digitrack Mach III locating system, mixing system, 500’ rod  Price:  $32,500

VERMEER 24X40(Ref#15622RA) Manufactured 2000, self-contained unit with diesel engine, locating system, full rack of rods, no mud system, ready to go  Price on Request

VERMEER 24 X 40(Ref#2170R)  Manufactured 1999, track mounted, Cummins diesel engine, refurbished and painted, dirt head, full rack of rods  Price:  $49,500

VERMEER 7 X 11(Ref#11442T)  Manufactured 2001, mounted on 1995 Belshe trailer, mud mixing system, includes Spot Tek 4 tracking system, one head transmitter has 1000’ of drilling on it while the other does not work.  Make Offer

VERMEER V4150 TRENCHER(Ref#2796T)  approx. 810 hours, diesel engine, Shark tooth chain cuts, approx. 6” wide x 4’ deep, front hydraulic push blade  Price:  $9,900

HORIZONTAL DRILL RIG(Ref#814N) Manufactured late 1970’s – early 1980’s, trailer mounted with 12hp Briggs & Stratton gas engine, mud mixing system, water pump, no rods  Price:  $20,000

STRAIGHTLINE 910 HORIZONTAL DRILL(Ref#6476N)  8200 lbs of thrust/pullback, 1100 ft/lbs of rotary torque, on board fluid pump, 37 hp Hatz diesel engine, 2 carbide tipped stakes, includes basic safety package, rear stakes short pinned, strike alert system, M3A mud mixing and delivery system, 9 hp engine, 27 gpm @ 1000 psi mud pump, hydraulic driven centrifugal mud mixer (Typhoon mud mixer), 3-300 gallon fluid storage tanks, 20 drill pipe 1-7/8” x 10’  Price:  $29,500

Mud pumps are a vital part of pipeline drilling projects. But with mud pumps, you have a decision to make: Should you use an onboard or a stand-alone mud pump? Both can get the job done well, but what’s the best option for your operation? To answer those questions, we have to look at three different factors: productivity, transportation and space.

First, you have to consider your productivity goals. To maximise the capacity and productivity of your pipeline directional drills, you need a consistent flow of drilling fluid that a mud pump can provide. However, there is a difference in size between onboard mud pumps and stand-alone ones.

For example, on the Vermeer D220x300 S3 Navigator® horizontal directional drill the maximum drilling fluid flow is 345 gal./min (1306 l/min). An onboard mud pump most likely won’t be able to reach that maximum flow but a stand-alone pump could. At 100% efficiency, the Vermeer SA400 Tier 4i (Stage IIIB) high-pressure mud pump has a maximum flow of 550 gal./min (2082 l/min), which would allow you to maximise the fluid flow on your drill.

If you lower your fluid flow, you are slowing your downhole speed and your thrust/pullback speed. You can get by with a smaller onboard mud pump, but you will have to take things slower and be patient as you drill.

“The higher the flow, the higher the productivity,” said Tod Michael, a Vermeer product manager for trenchless products. “If you are drilling a smaller diameter bore, a small onboard pump could handle the job. But if you need to increase your fluid, have a higher gal/min flow downhole or are drilling a 24 in. (60.9 cm) diameter or larger, a stand-alone mud pump is a good option.”

A stand-alone mud pump means there is more equipment to haul to the jobsite. Often, this requires an additional truck to transport it, since you also have to haul your drill, reclaimer and drilling fluid too. Another truck means extra costs and is something to be aware of beforehand.

One last thing to consider before you make a decision between onboard or stand-alone mud pumps is the space on the jobsite. Think about the typical amount of room you have for equipment. Will you have space for a stand-alone mud pump each time?

“Your jobsite space may vary from site to site, but ensuring that you will have room for a mud pump is an important factor to remember as you plan the project,” said Michael. “Usually, if contractors have the space, they will opt to have a stand-alone mud pump onsite.”