w 2200 mud pump manufacturer

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

Our precise equipment design and production processes reduce wear and tear, as well as, maintenance downtime and costs. Our precise machining makes shimming obsolete; the pump is ready to use after set-up and runs smoothly throughout the operation. Very low noise and vibrations levels increase the HSSE performance.

With a large variety of drives, motor and skid configurations, HMH provides a mud pump solution for any project and drilling requirement. We deliver high pressure triplex mud pumps with a maximum discharge pressure between 5 000 and 10 000 psi and power ratings between 1 000 and 2 200 hp.

Our mud pumps reduce service costs and increase operational efficiency. Our unique gear driven drive has an extended lifetime of up to 50 000 hours and is more durable than traditional chain or belt driven drives. Our hydraulic quick release system allows fast and safe replacement of fluid end parts.

The 1600 hp mud pumps are designed to circulate drilling fluid under high pressure (up to 7 500 psi) down the drill string to support any project requirements.

The 2200 hp mud pumps are designed for circulating drilling fluid under high pressure (up to 10 000 psi) down the drill string to support especially deep drilling operations.

F2000 triplex piston mud pumps are firm and compact in structure and small in size, with good functional performances, which can adapt to drilling technological requirements such as oilfield high pump pressure and large displacement etc. The F series mud pumps can be maintained at lower stroke rate for their long stroke, which effectively improves the feeding water performance of mud pumps and prolongs the service life of the fluid end. The suction stabilizer, with advanced structure and reliable service, can achieve the best buffering effect. Power ends of the F series mud pumps adopt the reliable combination of forced lubrication and splash lubrication to increase the service life of power ends.

W-440/446 Pump can be widely used in all kinds of works in the oil field. When the cylinder liner specification is 6""-3 1/2"", piston structure is recommended and it is suitable for Oil-Well Repair and shallow-well drilling, etc. When the cylinder liner specification is 3 1/4""-2"", axial piston structure is recommended and it is suitable for high-pressure work.

Rated input power 328KW (440HP) Rated Stroke 320 Stroke/Minute(320SPM) Stroke 152.4mm (6"") Gear Ratio 4.578: 1 Max. operation pressure 35Mpa Valve chamber Valve-Over API 4# Max. liner dia. 6"" Max. liner mud pressure(160 stroke/minute)16.9Mpa Dia. of suction manifold, 6""(150#) Flange Dia. of discharge manifold 3""(900#) Flange Dia. pinion shaft 95.25 mm(3.75"") Key 22.174x15.9mm Dimension:(No included base), 2479X1219X1103 mm

Matched sets of Pinion gear with hardened tooth profile and single piece bull gear with modified herring bone hardened tooth to enlarged tooth to increase AMGA class rating with contact area for extended life and improved reliability

Crosshead surfaces are hardened while leaving crosshead guide un-hardened, allowing the wear to concentrate on the guides because of this hard-soft combination, thus extending the life of the crosshead

Pulsation dampeners are made of forged steel rather than cast steel, improving reliability. All high pressure parts are hydrostatically tested. Internal components are changeable with off the shelf consumables.

Central lubrication manifold system with Stainless Steel tubing for feeding all main, eccentric, and pinion bearings. Pressurized lubrication is also provided to the upper and lower crosshead slide for longer crosshead life

Discharge Manifold with 5 1/8” API 5,000 psi RTJ flanged both sides, manufactured from a single trepanned, heat treated alloy steel forgingLoadmaster Universal Rigs, Inc.

Loadmaster Universal Rigs, Inc. and Loadmaster Engineering, Inc. are separate corporations which manage and control their own affairs. Each of these companies has its own separate identity, but in advertising and in our brochures we may sometimes use the word "Loadmaster". The use of such term is for convenience only and is not intended as an accurate description of corporate relationships.

Manufactured to withstand the toughest drilling and environmental conditions, our K-Series triplex mud pumps are ideal for all drilling applications. This legacy product features a balanced forged-steel crankshaft and Southwest Oilfield Products ‘L” Shaped modules which is essential to minimize wear, noise, and operating vibrations. These attributes are essential when drilling deeper high pressure formations, long laterals and when handling corrosive or abrasive fluids and slurries.

Every American Block triplex mud pump is manufactured and fully load tested before leaving our manufacturing campus, and is available in sizes ranging from 800 HP to 2200 HP. The American Block K1600 HP Mud Pump is also available in a 2000 HP up-grade version, when more HP is needed in the same 1600 HP footprint.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The pump is part of an order for Aker Solutions, the parent company of Aker Wirth. It will be shipped to Korea within January along with two others of the same type. The platform for BP’s Clair Ridge project is being assembled there in a local shipyard.

AMEC was awarded by BP and the project partners with the Engineering & Procurement Contract of two platforms. These will be used from 2016 in the North Sea to explore Clair, a 220 km² oilfield which lies 75 km west of the Shetland Islands at depths of up to 150 m.

Products from Aker Wirth have already demonstrated their superior performance on numerous rigs in harsh environment conditions like the North Sea. The quality of the pumps persuaded AMEC to award the company a contract for three TPK 2200 mud pumps in May 2011. Jennifer Howell, BP PSCM Drilling Lead for the Clair Ridge Project explained: “Aker Solutions were awarded the contract for three TPK 2200 mud pumps due to their technical superior solution against Clair specifications. Weight and space saving options, were also considerations for the Aker Wirth TPK 2200 pump.”

The TPK 2200 model is used in a widely diversified range of applications. The mud pumps are installed all over the world on drilling platforms, jack ups, semi-subs, drill ships and onshore drilling rigs which drill for oil and gas deposits.

The state-of-the-art gear-driven TPK 2200 high pressure mud pump has a power rating of 2200 PS and can pump up to 1640 liters of mud per minute at a maximum pressure of 7500 PSI. It operates at ambient temperatures from 0°C to +45°C. In addition, use of a single top mounted AC water jacket motor with direct water cooling has enabled the reduction of noise, with the level now lying below 85 dBA.

Customer analyses which document the availability of the systems during operation confirm the reliability and efficiency of Aker Wirth mud pumps, with availability rates of 99,9 % being achieved.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

1. High pump pressure and large discharge capacity: higher pumping capacity and larger discharge capacity than the traditional three-cylinder mud pump, which can deliver more pressure and mud to the bottom of the well during drilling. Thereby increasing the rate of penetration.

2. Light weight and small size: The pump has lighter weight and smaller volume than the traditional three-cylinder F2200HL mud pump. It is suitable for small drilling area, such as offshore platforms.

4. High reliability: Four sets of main bearing design, two more main bearings than traditional three-cylinder mud pump. Thus reducing bearing load and improving reliability.

5. Convenient Maintenance: reasonable structural design, easy to maintain. The wear parts of the fluid end are interchangeable with the ones of 1600HL pump.

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.