weatherford mp16 mud pump parts brands

For maximum performance and durability, our modules are made from individually forged, heat-treated alloy steel and feature an API 7 valve assembly for improved flow. Our L-shaped design features bore-seal technology for improved seal performance in higher pressures and is compatible with numerous “F-Series” drilling pumps including Honghua®, Bomco® Rongsheng®, Workforce® and other similar designs.

At BOPM, we constantly maintain 5 million worth of mud pump parts on the shelf at our Houston warehouse location. It includes modules, liners, extension rods, piston rods, pistons , threaded rings, caps, valve covers, valve guides, valves, seats etc. for all major brands of pumps: Gardner Denver®, Ideco®, Emsco®, National®, Oilwell®, Skytop Brewster®, Lanshi(3NB1300C) ®, Bomco ®, HH ®.

BOPM offers a complete line of interchangeable fluid end modules and accessories for triplex mud pumps, such as National, Emsco, Gardner Denver, Bomco, Ideco and Oilwell. We offer both standard OEM style replacement parts and Two piece “L” Shaped fluid ends.

BOPM piston rods are made with premium grade, heat treated alloy steel. The rods offer excellent resistance to fatigue, corrosion and heavy loads. A full line of piston rods are available for various pumps.

BOPM extension rods are made from high strength alloy steel, and are either heat treated or chrome plated. The rod offers excellent resistance to fatigue, corrosion and heavy loads. BOPM extension rods are machined and polished to ensure a perfect seal to protect the mud pump gear end.

All of our gear set adopt high-end carburization heat treatment and precise grinding machining to offer unparalleled durability; first we use high strength alloy steel, then adopt the Carburization heat treatment to enhance the hardness and wearability, finally adopt the grinding fine machining to ensure the smooth gear teeth surface; Resulting in consistent and rugged performance throughout pump operation.

BOPM bonded urethane pistonsare constructed of urethane, bonded to a steel hub. The double durometer urethane is designed to provide optimal performance in oil or water based mud and high drilling pressures.

BOPM Replaceable Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

BOPM Bonded Rubber Pistonis made with tough and durable Buna N rubber for all pressures, and is ideally suited for water-base mud. A special processing of the fabric provides an unusually waterproof bond of fabric to piston which assures longer life.

Premium can produce the spare parts of WEATHERFORD MP-5 MUD PUMP , MP-8 MUD PUMP, E-447 MUD PUMP, MP-10 MUD PUMP, MP-13 MUD PUMP, MP-16 MUD PUMP, E-2200 MUD PUMP.

Weatherford is one of the world"s largest multinational oil and natural gas service companies. The company provides products and services for drilling, evaluation, completion, production and intervention of oil and natural gas wells, along with pipeline construction and commissioning. Headquartered in Switzerland, Weatherford operates in more than 100 countries across the globe and employs more than 35,000 people (2016).

The Weatherford MP Series F & FB style design compatibility means that parts are readily available and fully interchangeable. The MP series mud pumps are based on the industry-recognized, proven and trusted F & FB style mud pump. The MP10 & MP16 Models are always in stock and available for immediate shipment.

The MP Series F style design compatibility means that parts are readily available and fully interchangeable. The MP series mud pumps are based on the industry-recognized, proven and trusted F style mud pump. Any of these parts for the MP Series models below can be purchased from Rig Manufacturing, LLC.

The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-30 days. In addition, contact us to get the full time of the order.

The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-30 days. In addition, contact us to get the full time of the order.

Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted

otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or

foreign patents. For more information, contact patents@weatherford.com. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

Merit Pump and Equipment Company is your direct Weatherford pump distributor. We offer you the complete line of Weatherford reciprocating pumps, including triplex and quintuplex. We can assist you in all your pump service needs. If you are looking for Weatherford pump repair or supplies, we are the specialist team you can count on every time.

Established in 1990, our facility in Wooster, Ohio includes a complete pump repair service center for your major or minor repairs. We also have a knowledgeable sales department ready to answer any of your questions and supply you with the right Weatherford pump equipment and guidance. Our highly trained specialists will work with you to understand your requirements and match you to a specific pump application. We will size the right pump for you and provide ongoing support.

We are a dependable, experienced Weatherford pump service and supply center, & an official Weatherford pump distributor. We are ready to assist you with any inquiry.

Weatherford T-Series and W-Series are versatile pumps, offered in a variety of material and design options that enable them to be used in a wide range of applications. The Weatherford pumps cast iron power frame ensures robust, fatigue-free durability and excellent wear resistance of moving surfaces. The fluid cylinders are made from either forged 4140 carbon steel, 2205 duplex stainless-steel, or 955 cast nickel-aluminum-bronze materials for increased durability and extended life.

Critical components like the crankshaft, connecting rods, crossheads, and bearings are larger than the industry-standards. This enables them to withstand continuous duty service and harsh operating conditions. Weatherford provides tungsten-carbide, coated plungers as standard.

Weatherford offers optional solid ceramic, or ceramic-coated plungers on request for special applications with pumping abrasive or corrosive fluids for superior durability. The oil trough is designed to evenly lubricate the crossheads and wrist-pin bearings during operation to reduce wear and extend component life. A variety of packing arrangements are available to meet the requirements of any application. Weatherford pumps are API-674 compliant upon request.

The Weatherford W-Series triplex and quintuplex plunger pumps are rated for flows from 6 GPM to as high as 688 GPM intermittent duty (533 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI.

The Weatherford’s T-Series triplex plunger pumps are smaller pumps rated for flows from 0.50 GPM to 85 GPM intermittent duty (or 56 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI.

The Weatherford’s T-Series triplex plunger pumps are smaller pumps rated for flows from 0.50 GPM to 85 GPM intermittent duty (or 56 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI. These pumps are offered with carbon steel or duplex stainless-steel fluid end cylinders.

If you need Weatherford pump services, including repair and equipment, please contact us today. We will provide you with decades worth of guidance on your current Weatherford pump or help with your future product. Our specialists are eager to work with you. Call us today at 800-700-8265.

A wide variety of mud pump weatherford options are available to you, such as 1 year, not available.You can also choose from new, mud pump weatherford,As well as from energy & mining, construction works , and machinery repair shops. and whether mud pump weatherford is 1.5 years, 6 months, or unavailable.

We can make all spares of fluid end and power ends(Pinion shaft, bull gear, crankshaft, crosshead, guide of crosshead, pony rod, bearings and others)  for following brand mud pumps:

Premium Rig Parts is a quality independent manufacturer and supplier. We are neither a licensee, nor affiliated with any other original equipment manufacturer (OEM) which may be named throughout. The manufacturers" names or trademarks used herein are solely for identification purposes and are not intended by Premium to cause confusion as to the source, sponsorship or quality of the parts manufactured by Premium. The OEMs named throughout this catalog do not sponsor, promote, warranty or endorse PREMIUM"s products. Part number usage is for identification purposes only.