12 ga overshot cards in stock

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks(either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Our custom logo overshot cards are the favorites of our ballistic lab. We use a heavier stock material (.045") and apply a water-repellant coating to both sides. The result is an attractive and highly functional overshot card.

Use: Simply place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPIRoll Crimpers.

Excellent for roll crimpsOur testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

#2A, Alien, Bonnie Blue, Cannon, Cold Dead Hands, Come and Take It, Dragon, Dumpster Fire, F-bomb, Gadsden, Gavel, Grimm, Justice, Knock Knock, PEW PEW, Pin Up, Rent is Due, Shit Show, Skull, Trojan, USA, Zombie

These custom overshot cards come in a package of  250 pieces. Two thicknesses allow loaders to achieve the perfect roll crimp regardless of shot size selected. They come in 8 different colors to visually identify your custom load quickly.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

NOTE: We can no longer accept Paypal for Ammo or Ammo Components as it is against thier new rules. Apparently, they are trying to make us all safer, however this new rule/political statement does absolutely nothing but divide us. You can still pay by credit card, check, or money order. Sorry about that! Please voice your opinion to Paypal 1-888-221-1161

Circle Fly wads have recently been improved. The 1/8” nitro card wad is now 100% waterproof, so it may be loaded in black powder shot shells using lubed cushion wads and the moisture will not soak through the nitro card and foul out the powder charge. The overshot card is now thinner and lighter, but stiffer; it is .025” thick instead of .030”, but is not made from a laminated stock like the old one was, so it is actually stiffer. Wad size .740.

The price to quantity is second to none! I have completely switched from BPI overshot cards to Dixie Gun Works! plus they are a true .025" thick card were BPI"s cards mic at .040" which makes a world of difference on some of my more particular buckshot loads crimps! Thanks to the team at Dixie Gun Works!

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks (either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads.

Clear Overshot Disks(either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection:Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.

Antigua and Barbuda, Aruba, Australia, Austria, Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Bulgaria, Cambodia, Canada, Cayman Islands, Chile, Colombia, Costa Rica, Cyprus, Czech Republic, Denmark, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana, Germany, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hungary, Iceland, Indonesia, Ireland, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kuwait, Latvia, Liechtenstein, Lithuania, Luxembourg, Macau, Malaysia, Maldives, Malta, Martinique, Mexico, Monaco, Montserrat, Netherlands, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Republic of Croatia, Reunion, Romania, Saint Kitts-Nevis, Saint Lucia, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, United Kingdom, United States, Vietnam

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with Ballistic Products Roll Crimp tools.

The operator begins by lowering the ram part way until the punch is just below the feed port on the die, but still inside the base of the die.  All reloading presses have a bit of play in the shell holder, so the safest way to protect the cutting edge is to simply feed the punch into the die part way before engaging the cutting edge on material.

Next, the user simply slides the material to be punched into the feed port and begins operating the press as normal.  As filler wads are punched, they will be pushed out the top of the die where they can be collected.  If the operator’s intention is to produce a great many filler wads in one sitting, it is advisable to place a container (a margarine container works well) with a hole cut in the bottom on top of the die, allowing them to stack up inside and avoid making a mess.

Originally designed this unit to punch corrugated cardboard, so that seems like a good place to begin.  The punch works quite well with standard corrugated cardboard boxes I’ve cut into strips.  It’s a fast, simple process that yields nice, concentric disks.  Cardboard works great for buck and birdshot as it’s dense enough to take up slack, but flexible enough to compress during loading.  This is critical to obtaining a professional looking crimp with even the trickiest loads.

Next on the list is my second favorite material, cork.  Once again the press made short work of the 1/4″ thick cork sheet.  The great thing about cork wads is they’re extremely dense and won’t compress, making them ideal for heavy projectiles like slugs, roundballs, or filling large voids in the shot column.

Finally we have plastic blister packaging.  Although not biodegradable, I really like having a transparent option on hand when I need something as an overshot card.  Once again it cuts smoothly, and easily.  The material demonstrated above is  actually plastic from grocery store salad containers if you can believe it, however thicker packaging not only punches well, it crimps even better.

The finished filler wads measure 0.650″, the same internal diameter as a standard 12G shot cup, and an equally excellent size for use as overshot cards.  With a good supply of these on hand, it’s no trouble at all to customize my shot columns by placing them above or below my shot or slugs.  Likewise, if I’ve got a difficult load to crimp like low-volume birdshot or roundball slugs, adding one to the top as an overshot card makes things a snap.

Afganistan Albania Algeria Andorra Anguilla Antigua & Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahrain Bangladesh Barbados Belarus Belgium Bermuda Bosnia & Herzegovina Brazil Bulgaria Cambodia Cameroon Canada Cayman Islands Chile China Colombia Congo Croatia Cuba Cyprus Czech Republic Denmark Dominica Dominican Republic Egypt Estonia Finland France Georgia Germany Ghana Gibraltar Greece Grenada Guyana Hong Kong Hungary Iceland India Indonesia Iran Iraq Ireland Isle of Man Israel Italia Jamaica Japan Jordan Kazakhstan Kenya Korea Kosovo Kuwait Kyrgyzstan Latvia Lebanon Libya Liechtenstein Lithuania Luxembourg Macao Macedonia Malawi Malaysia Maldives Malta Mauritania Mauritius Mexico Moldova Monaco Mongolia Monte Negro Morocco Mozambique Namibia Netherlands New Zealand Nigeria Norway Oman Paraguay Peru Philippines Poland Portugal Qatar Romania Russia Saudi Arabia Serbia Singapore Slovakia Slovenia South Africa Spain Sri Lanka Sweden Switzerland Syria Tailand Taiwan Tajikistan Tanzania (The United Republic Tunisia Turkey Ukraine United Arab Emirates United Kingdom United States of America Uzbekistan Venezuela Vietnam Yemen