overshot assembly manufacturer

Overshots are a key component of wireline coring systems. To retrieve the core sample, the overshot is lowered into the hole on a wire cable until it comes in contact with the spearhead point on the head assembly. Positive latching lifting dogs securely attach, and the inner tube assembly is pulled from the hole to retrieve the core. V-lock Overshots Hole Products" V-lock overshots are safe, reliable, fast, and easy to use. The automatic safety feature is designed to reduce the chance of an accidental release. When the inner tube assembly is attached and lifted, the lifting dogs automatically retract into position. No extra manual steps are required to activate the safety feature, thus reducing the potential for human error. Standard Overshots Hole Products" standard overshots feature a manual safety lock pin. Once the core filled inner tube is hoisted above the top of the drill rods the safety lock pin can be inserted through the overshot head and under the spearhead point. This will allow the operator to hoist and remove the core sample from the inner tube.

Product Description Our overshots are good quality ,specifications as follows:BQ,NQ,HQ,PQ,BTW,NTW,HTW,AQ,S75,S75A,S95,S95A Product show Company Information

We provide good power in high-quality and progress,merchandising,revenue and internet marketing and operation for Overshot Assembly , BQ Overshot Assembly , Nq Overshots Assembly , invite all fascinated potential buyers to visit our website or contact us straight for further information.

We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Overshot Assembly , BQ Overshot Assembly , Nq Overshots Assembly , Whether selecting a current product from our catalog or seeking engineering assistance for your application you can talk to our customer service center about your sourcing requirements. We can provided good quality with competitive price for you.

The innovative hq overshot assembly on Alibaba.com have a fitting design that offers comfort when using them. They have a dense sponge pad on the speaker for eardrum protection, and the microphones are flexible to allow for suitable adjustments. The connecting cord has a small control panel that adjusts the microphone and speaker volumes. These high-output hq overshot assembly speakers are ideal for call center offices.

The comfortable hq overshot assembly on Alibaba.com are hands-free, which allows the user to speak and type or write at the same time. The speaker output quality is of high standards. These products offer enhanced safety to the eardrums through noise and echo cancelation. With simple steps to connect, the gadgets are easy to operate. Users have an option of having the corded or wireless versions of these products.

The user need should be the top priority when seeking to purchase the technological hq overshot assembly. The jack pin size should be compatible with the connecting port. Working in comfort depends on what one likes, either the single or double speaker gadgets. Depending on the preference, the buyer can go for stationary or portable products for ease of movement. Durability is essential to reduce the instances of constant repurchasing.

The products are of premium quality. The competitive deals on hq overshot assembly accommodate a wide range of financial budgets. With significant warranties, the buyers can enjoy memorable after-sales experience, as the verifiable suppliers have years of global service delivery. Rely on the convenient products on Alibaba.com catalogs and increase work output.

PEERCHEER offers T2-66 double tube conventional core barrel for use with CR50/BW/BWJ/BWY rods. T2-66 core barrel overshot assembly is a thin-wall all round core barrel for most type of homogenous or some-what broken formations where water or mud flush can be used. T2-66 core barrel thin wall design offers features as faster penetration, lower diamond cost, larger core size. T2-66 core barrel is available for application in metric 66 mm size hole. T2-66 core barrel consists of the T2-66 head assembly , T2-66 inner tube components and T2-66 outer tube components.

The HQ series overshot assembly is a kind of tool specially used to Lift out and place inner tube assembly. At present, we have four kinds of C-Q series overshot assembly: BQ, NQ and PQ.

Its main components are overshot body, lifting dog. Regarding those to be exported, the HQ series overshot assembly will be packed by export-standard plywood boxes.

As a professional manufacturer of HQ series overshot assembly in China, Wuxi Drlling Tools Factory still provide customers worldwide with China overshot assembly, hoisting plug, foot clamp, circle wrench, etc. All of our products have passed the certification of ISO9001: 2000 and API 5DP. With high quality and competitive price, our products have been well received by customers from Mongolia, Kazakhstan, Russia, Iran, Afghanistan, Oman, Turkey, Thailand, Vietnam, Myanmar, Malaysia, Indonesia, Singapore, Taiwan, Colombia, Mexico, Brazil, Canada, Australia, etc.

Q series Overshot AssemblyThe HQ series overshot assembly is a kind of tool specially used to lift out and place inner tube assembly. At present, we have four kinds of Q series ...

China Overshot AssemblyThe China overshot assembly is mainly used for pulling up inner tubesinside core tubes. And we offer various overshot assemblies for clients all over the world...

In this article we discuss some of the innovations that have been introduced by equipment manufacturers to eliminate some of the hazards associated with inner-tube head assemblies and overshots

Jammed latches are a common occurrence and commonly occurs when the inner-tube is overfilled. The process of trying to release the latches involves jarring with the overshot which will accelerate wear of critical components and can bring the wireline cable to its yield point or even its failure point. If the wireline cable snaps then a series of events are triggered that introduce many other hazards to the operation and so it is considered essential that incidences of jammed inner-tubes are eliminated completely.

In a “standard” inner-tube assembly, the problem is exacerbated by the path that the latches follow when the latch retracting case moves upwards. In these inner-tube head assemblies, as the latch retracting case slides upwards, the latches move slightly upwards before they move inwards, this effectively increases the contact load between the latches and the bottom edge of the locking coupling and further inhibits release of the inner-tube.

To overcome the problem of jamming at the latches, a manufacturer developed an inner-tube head assembly that uses a different latch configuration – commonly called the “link-latch” system. These latches are not “retracted” by a latch retracting case, they are released when the spearpoint id pulled upwards by the overshot. The latches move slightly downwards and then inwards when the spearpoint is pulled upwards and so reducing the load on the latches and the base of the locking coupling. This latch system effectively eliminates the incidence of stuck inner-tubes.

De-latching of the inner-tube assembly from the overshot can have serious consequences and so all of the major drilling equipment manufacturers (MBI Drilling Products, Epiroc, Sandvik and Boart Longyear) have released what are commonly referred to as “safety overshots” – these are overshots that positively lock the overshot lifting dogs onto the spearpoint of the inner-tube head assembly.

The MBI type and the Longyear type safety overshots can be used with and standard or link latch type inner-tube head assemblies but the Epiroc and Sandvik types are completely new inner-tube and overshot assemblies.

The main feature of the Longyear Ezy-lock safety overshot is the locking sleeve that can be rotated into a position where the lifting dogs are locked in the engaged position onto the spearhead assembly.

Th MBI safety overshot works in a different way. In this overshot the lifting dogs are able to slide longitudinally inside the overshot body. When the overshot is dropped onto the spearpoint, the lifting dogs engage the spearpoint and as the overshot is pulled upwards the overshot body slides upwards relative to the lifting dogs and the bottom of the lifting dogs are forced inwards onto the spearpoint by a taper cut into the inside of the slots for the lifting dogs. The greater the upward pull on the overshot the more that the lifting dogs are forced inwards. Once engaged, the spearpoint cannot de-latch when under axial load.

The C-Q series overshot assembly is a kind of tool specially used to salvage and place inner tube assembly. At present, we have four kinds of C-Q series overshot assembly: BQ, NQ, HQ and PQ....

The China overshot assembly is mainly used for pulling up inner tubes inside core tubes. And we offer various overshot assemblies for clients all over the world, such as S56,S59, S59B, S75, S75B,...

This overshot assembly is especially manufactured to pull up inner tubes inside core tubes, and it features high salvaging efficiency, low material consumption and wide applications.

Wuxi Drlling Tools Factory is a leading manufacturer of overshot assembly in China. Both ISO9001: 2000 and API 5DP certificates are available for our products, and our products have been quite popular among clients from Mongolia, Kazakhstan, Russia, Iran, Afghanistan, Oman, Turkey, Thailand, Vietnam, Myanmar, Malaysia, Indonesia, Singapore, Taiwan, Colombia, Mexico, Brazil, Canada, Australia, etc. Besides, OEM service is also available. If you need, please contact us freely.

Core barrel is the complete drilling tool assembly, it’s the part of machinery used for drilling extremely hard formations like mineral site or water well with rock bottom.

Length is available in 1.5 meters and 3.0 meters, the whole complete core barrel is made up of many spare parts, they are head assembly, pump-out adaptor, piston plug, O ring, core ejection ring, outer tube, inner tube, extension tube, stop ring, core lifter, core lifter case, locking coupling, adaptor coupling, landing ring, outer tube, inner tube stabilizer, thread protector, core bit and reaming shell are not supplied in the core barrel and need to be ordered separately, many geological survey and companies involved in mining exploration works use this type of equipment.

I debated on where to go next, but at the end of the day the most widely used fishing tool has to be an overshot. Some will say why not a spear? Well if you must ask, always go with the strongest fishing tool you can run to catch the fish. And if you run a spear, never plug the I.D. of your fish by breaking it off. Done with that!

The info that follows has been taken from the manuals published on overshots. I realize that paper manuals are a thing of the past, yes, yes at one time fishing tool hands carried massive catalog brief cases full of reference material. Now you have the luxury of your laptop loaded with information. If you have never sat down and read an overshot manual, now might be a good time.

The overshot is highly versatile and efficient tool. There are several different types of overshots, however each overshot is designed to engage a specific size of tubing, pipe, coupling, tool joint, drill collar or smooth OD tool.

The original overshot was developed by Bowen Oil Tools, which is now part of NOV. One thing I will point out is that in the catalogs you will see more than one assembly number for a given OD of Overshot, this came about due to the two locations developing their own variations. I found this information on NOV’s website and thought it was interesting to share.

Bowen™ became a leader in innovation with the creation of the first overshot, the Series 150, in 1935. This tool set the standard for fishing equipment, and the quick acceptance of the tool assured the company partners that their business would be successful. The company continued to create new products, building a reputation for their well tool design and construction.

Currently there are several manufacturers of overshots, NOV (Bowen), Rubicon (Logan) and Applied Oil Tools (Gotco). These overshots are designated by a series number as follows:Series 10 - Sucker Rod Overshot

Overshots may be identified by one of the following, known as “type”:Full Strength (FS) - engineered to withstand all pulling, jarring and torsional strain

The basic overshot (from top down) consists of a top sub, a bowl, grapple, control, and a guide. In addition to the basic components, some overshots (Series 10 and 150) can be dressed with either a:Spiral grapple used if the fish diameter is near the maximum catch of the overshot, or a

The Series 150 Overshot features the ability to packoff on the fish. When the circulating packoff is not used, the fluid circulates down the drillpipe, aroundthe top outside of the fish, through the slip or grapple assembly, around the guide shoe and up the annulus.

When the circulating packoff is used, the annular space between the top outside of the fish and the inside of the lower part of the overshot is packed off, diverting the fluid flow down into the fish, making it easier to release and recover the fish. Packoffs usually are not high pressure devices but will often withstand sufficient pressure to establish circulation through the fish. Third party high pressure packoffs are available from various sources.

The extension can be installed between the top sub and the bowl of the Series 10, 70, and 150 overshots. It is used to extend the overshot bowl to:Allow the grapple to catch farther down on a fish that may be necked down at the top by having been pulled in two, or latched by an overshot and released several times, or to

A stop ring must be used where a fish OD reduces immediately below the catch area to allow the grapple to bite on full-size pipe.Example - catching a Hydril upset or EUE collar. If the upset of collar should pass completely through the grapple, the overshot may not be releasable.

The Series 10 Sucker Rod Overshot is designed to engage and recover sucker rods, couplings, and similar items from inside tubing strings.Basket grapples are recommended for fishing for hardened and ground boxes (Sucker Rod Box).

The Series 20 Sucker Rod Overshot is a short catch tool which provides a means for engaging the exposed portion of a fish too short to be engaged with a Series 10 overshot.Uses basket grapples only

The Series 70 Short Catch Overshot is designed to engage the exposed portion of a fish too short to engage with Series 150 overshots.Uses basket grapple only

The Series 150 Releasing and Circulating Overshot is used to engage, packoff, and retrieve twisted-off lost tubing, drillpipecoupling, tool joint, casing or other similar fish.

A right hand wicker grapple converts a normal right release overshot to left hand release. This grapple is used where you expect to apply excessive right hand torque to release a packer, safety joint, etc. Note: Overshot will have to be released by left hand rotation.

High Pressure Packoff Assemblies:The High Pressure Packoff Assembly is an accessory to the Series 150 Overshots. It is used when high pressure circulation to the fish is required. It consists of a packoff sub with packing and packing rings and is installed between the top sub and bowl of the overshot. By running the packoff sub above the bowl, this design prevents the application of high internal pressures to the overshot bowl. The design of the High Pressure Packoff Assembly allows pressures two to three times the standard overshot packoff to be applied to the fish.

This information comes directly from the NOV manual for the Wide Catch Overshot. This is probably the first and only change to this common tool I know of in my career.

The Wide Catch Overshot provides the strongest tool available to externally engage, pack-off, and pull a fish that has been significantly worn. This tool has similar rugged design features and construction as the industry standard, Bowen Series 150 overshot, with the ability to interchange the Bottom Guide with the full range of existing components used with the standard Bowen Series 150 overshot.

In service, the Wide Catch Overshot (WCOS) takes a positive grip over a large area of fish and is capable of withstanding heavy pulling, torsion, and jarring strains without damage to the tools or the fish.

The WCOS has been designed to significantly increase the catch range of the OD of the fish to be caught, compared to the standard overshot. This enables a greater opportunity for a successful fishing operation in a reduced number of trips, thus reducing overall intervention costs for the operator. In addition to the large catch range, the WCOS has the ability to seal across very large extrusion gaps at both standard and high pressure and provide full circulation through the fish, should it be required.

New coarse threads have been introduced at the connection between the top sub and bowl to allow for quick assembly while maximizing the torsion and tensile strength.

Connections between the Top Sub/Bowl and Extension Sub have been designed to create a seal. This will prevent the connection from washing out should the overshot be required to be flowed through for a long period of time. In order to lock the Top Sub/Extension Sub to the Bowl from backing off during operation, set screws have become standard and will gall the threads should the connection break free.

The operation of all overshots is identical. The exception being that the Series 150 carries a packoff which provides circulation through the fish. First, determine that the overshot is properly assembled and dressed with the proper size grapple. Make up the overshot on the fishing string (normally it is run connected to the bottom of the bumper sub) and run it into the well. As the top of the fish is reached make sure circulation has been established to clear overshot ID of any plugging. Lower the overshot onto the top of the fish with no rotation at first. A 5,000 pound set down weight will be sufficient to engage the grapple. While lowering the overshot over the top of the fish watch for pressure build up, shut off pumps if any pressure build up is noticed. Should any back pressure be noticed, release the back pressure to allow the grapple to engage the fish. By elevating the string it can be determined, if the grapple went over and engaged the fish. If unable to work overshot over top of fish without rotation, then slowly rotate the fishing string to the right and gradually lower the overshot over the fish. Combined rotation and lowering over top of the fish are important to keep the grapple in the release position. This provides the maximum clearance between the grapple and fish. While lowering the overshot over the top of the fish, watch for torque build up and an increase in pump pressure. A pump pressure build up indicates the overshot has gone over the top of the fish thereby reducing the flow area. Stop rotation (continued rotation could dull the wickers of the grapple) enabling the grapple to set. Allow the right hand torque to slack out of the string and then pull on the string by elevating the string to set the grapple.

To release from the fish, bump down, then simultaneously rotate to the right and slowly elevate the fishing string. It is best to have a clean fishing top before running the overshot.

PARVEEN Self-Releasing Overshot are used to fish wireline tools that have no fishing neck as well as damaged wireline tools and sucker rods that cannot be fished with a magnet.The tool is operated by applying the weight of the tool string on to the fish, which engages the fish. The harder the operator pulls on the overshot, the tighter the grip of the slips on the tool to be fished becomes. Should it proves impossible to free the jammed tool, a safety device permits the overshot to be released by jarring down. Once the overshot has been recovered, it is possible to change the size of the line to obtain a stronger jarring effect.