overshot dog quotation

Since Boart Longyear introduced the Q™ Wireline system in 1966, retrieving the inner tube from the core barrel has been handled the same way: an overshot with lifting dogs (spring loaded hooked “fingers”) is lowered or pumped into the hole until it snaps over a pivoting spearhead mechanism affixed to the inner tube assembly. Once the head assembly has been removed from the hole, the driller uses the pivoting spearhead to position the head assembly on their workspace and squeezes the back of the lifting dogs to release.

Inner Tube Handling: When hoisting the inner tube assembly, elastic action of the wireline cable or accidental impact during handling can un-load cable tension and overcome spring loads which allows the hooked lifting dogs to accidentally release the spearhead. The surface ‘Ezy-Lock™’ overshot includes a twist-sleeve that locks onto the spearhead even without cable tension, whereas competing overshots require cable tension to maintain a lock.

Lifting Dog and Spearhead Wear: To balance strength and wear resistance, lifting dogs and spear points are heat treated to a medium hardness. However, it’s difficult to visually evaluate or functionally test the degree of wear, especially in underground applications.

Boart Longyear currently provides a secondary safety pin that clips through the overshot, passing just under the spearhead tip. This adds an extra layer of protection in case the lifting dogs are excessively worn or deformed. However, spearheads are loaded cyclically and often loaded ‘off-pivot’, which deforms the components over time, to the point of disassembly. While the more recent MKII™ version of the spearhead assembly is much more robust, in the case of spearhead failure, the head assembly will release from the overshot regardless of lifting dog or safety pin use or condition.

This patent-pending overshot leverages our previous experience with Roller Latch™ head assemblies to create a more reliable and longer lasting system that eliminates spearheads and lifting dogs entirely. The spearhead assembly is replaced by a one-piece socket receptacle (spearhead adapter) that accepts the overshot itself, which has rollers that latch into an internal groove in the spearhead adapter.

The increased toughness and hardness of the bearing quality latch rollers have a proven history of outlasting traditional pivoting latches for wear life. The new overshot will also feature the same Nitreg™-ONC surface treatment as Roller Latch head assemblies that drastically improves corrosion resistance (Nitreg is a trademark of Nitrex Inc.).

Safety pin integration in the new underground Quick Pump-In™ overshot now pulls double duty of both locking the overshot from accidentally releasing while hoisting, as well as holding the head assembly and overshot together in case of component failure due to excessive wear. Also, the socket and rollers are not affected by side loading and ‘off-pivot’ loading during tube handling outside the hole, eliminating gradual deformation or disassembly. The new surface overshot will also include a one-hand twist-lock sleeve to maintain a locked position while hoisting outside the hole, even with a loss of wireline cable tension.

It’s also easy to use.  Instead of pushing the backs of the lifting dogs together, the driller pushes the two halves of the assembly together, retracting the rollers and releasing the head assembly. This operation takes about the same amount of force as the current overshot, so drillers won’t miss a beat.

Additional benefits have been included[CA1]  apart from the elimination of the spearhead and lifting dogs. While the current design uses a solid pivot pin that is peened into place (making it difficult to re-build), the Roller Latch Overshot has no pins whatsoever. Everything is held in place by simple threaded connections for easy maintenance.

The Roller Latch Overshot features a brand new pump-in cable release system, originally conceptualized and prototyped by one of our expert underground drillers in Canada. A slotted sleeve and pumping seal assembly is placed over the wireline and pumped up to the overshot. The sleeve engages a quick-release mechanism and releases the wireline. This system has proven to be much more reliable, and may be the feature drillers are most thrilled to have going forward.  Reports of fewer broken wirelines have been received from several sites testing the pump-in cable release system.

To combat this and make Q/P Roller Latch easier to use while maintaining its safety features, a ‘brake release spring’ was created. This spring assembles quickly inside of the spearhead adapter on the head assembly. While tripping on its own, the head assembly brake works normally, but when the overshot latches into it this spring is compressed, disengaging the brake. This feature has also been received very positively by drillers in the field.

A surface-style overshot is also in development in B/N/H sizes. In addition to many of the features outlined in this article, the aim is to add more innovations, including:

• An improved lock sleeve to disable accidental head assembly release and stop drillers from accidentally sending the overshot down the hole while locked.

We advise you email us images of the teeth (mouth closed, lips up and side on for both left and right) just a few days before you travel. Things change quickly in growing dogs and it might save you a wasted journey.

These permanent teeth can theoretically be treated by three options. Not all options are available to all cases. These options are described below and are either surgical removal of the lower canines teeth (and possibly incisors also), crown amputation and partial pulpectomy or orthodontics via an inclined bite plane bonded to the upper canines and incisors. The latter option may not be available to all dogs if the diastema (space) between the upper third incisor and canine is too small for the lower canines to move into or if the lower canines are located behind (palatal) to the upper canines.

This is a very delicate procedure and carries very high success rate (in our hands) since the availability of Mineral Trioxide Aggregate (MTA). We have used it as the material of choice since 2005. The previous agent (calcium hydroxide) was much more caustic and tended to "burn" the pulp. The success rate of MTA treated cases is quoted as 92% in a seminal ten year study based in vet dental clinics in Finland. This compares with 67% when caclium hydroxide was previously the agent. Luotonen N et al, JAVMA, Vol 244, No. 4, February 15, 2014 Vital pulp therapy in dogs: 190 cases (2001–2011).

In some mild cases of lingual displacement we may be able to use crown extensions for a few weeks. For this treatment we bond composite resin extensions on the lower canines to increase the crown length by around 30%. This allows the lower canines to occupy the correct position and also provides more leverage to tip the crown tips buccally. The crown extensions remain in place for around 2 months and are then removed and the tooth surface smoothed and treated. The major downside is that if the dog damages or breaks them off, you need to return here for repairs. Sticks and other hard objects can easily cause damage and some toys also have to be withdrawn for the treatment period.

Not all dogs or owners are suited to this. Bite planes can become dislodged if the dog bites a stick or other hard object. Bite planes also need cleaned and adjusted from time to time under sedation or anaesthesia. All of this means more travel and expense for you and more anaesthesia for your pet. It is our view that if a treatment has uncertain outcomes built in it should probably not be used.

Here is a visual look into what an “undershot” and “overshot” jaw looks like. In recent years, I’ve noticed more and more dogs with this issue. Can a dog live productive life with a malocclusion: (imperfect positioning of the teeth when a jaws closed) Yes but with some issues along the way.

Let’s begin with a puppy will have 28 “puppy teeth” by the time it reaches six months old (this number can vary from breed to breed) By adulthood, most breeds will have a total of 42 teeth. As defined above a malocclusion or simply a misalignment of a dog’s teeth occurs when their bite does not fit accordingly beginning as puppy’s teeth come in and worsening as their adult teeth follow.

the upper jaw is longer than the lower one, an overshot or overbite. When a dogs mouth is closed, a gap between the upper and lower incisors (teeth) will be present. In most cases, puppies are born with a slight over/under bite and with time the problem can correct itself if the gap is not too large. What should be noted is if a dog’s bite remains over/undershot by 8-10 months old, that’s how it will remain for the remainder of its life. In overbite’s the structure may worsen as the permanent teeth come in as they are larger and can damage the soft parts of the mouth. Teeth extractions are sometimes necessary.

Structural dentition of a puppies jaw should be checked very early on to help eliminate this issue. Unfortunately most dog owners won’t notice until is late in the game. More so is the issues of backyard and/or inexplicable breeders breeding dogs with undershot/overshot jaws and potentially passing along this trait to future generations.

With an overbite, the upper jaw is longer than the lower one. When the mouth is closed, a gap between the upper and lower incisors occurs. Puppies born with an overbite will sometimes have the problem correct itself if the gap is not too large. However, a dog"s bite will usually set at ten months old. At this time improvement will not happen on its own. Your pet"s overbite may worsen as the permanent teeth come in because they are larger and can damage the soft parts of the mouth. Teeth extractions are sometimes necessary.

Problems that can arise from malocclusion are; difficulty chewing, picking up food and other objects, dogs with overshot jaws tend to pick up larger chunks of food since they can"t chew nor pick up smaller morsels which can lead to choking and future intestinal issues. These dogs are also prone to tartar and plaque build up which if left untreated can lead to other significant health issues such as heart problems. Other issues are listed below:

What"s important to note is that most malocclusions do not require treatment, it"s simply how a dog will live its full life as. This is important since most breeders breeding for financial gains don"t think about. What can be done is to brush the teeth regularly to prevent abnormal build-up of tartar and plaque. A veterinarian in cases that can be solved will sometimes recommend a dental specialist if a client want to correct the teeth misalignment. Recently I"ve heard o specialist putting "braces” on puppies to realign the teeth.

#dog #dogs #puppy #pup #puppies #puppylove #pets #life #family #bulldog #maltese #mastiff #chihuahua #cockerspaniel #vet #meds #instadog #instagood #instadaily

A suffix title conferred on dogs that have qualified the required number of times in Senior tests at hunting tests for pointing breeds, retrievers, and spaniels.

A prefix title conferred on dogs that have earned the Grand Nite Champion and have won the required number of first placements in AKC Coonhound night hunts.

All footprints falling on a single line of travel. When a dog breaks into a trot, his body is supported by only two legs at a time, which move as alternating diagonal pairs. To achieve balance, his legs angle inward toward a center line beneath his body, and the greater the speed, the closer they come to tracking on a single line.

An event or class, restricted to purebred dogs, that is not normally offered at an AKC all-breed or specialty event. Special permission may be granted to open the event to breeds not recognized by the AKC or to a well-known dog with a celebrity. Examples of Special attractions are:

Person who is responsible for the smooth running of a specific ring; for example, assembling the classes, distributing armbands, etc., thereby enabling the judge to concentrate on judging the dogs.

Monthly publication of the AKC. A listing of dogs that have sired or produced a litter that has been registered with the AKC. With this information, a person can use Stud Book volumes to trace a dog’s lineage and to produce pedigrees.

Class where a stud dog is shown and judged with at least two of his offspring. Judging is based on the quality of the get, not the sire. (Club may permit more offspring to be shown. The upper limit must be stated in the Premium List.)

A completed form (used primarily by handlers) that authorizes the AKC to accept the signature of someone other than the actual owner of the stud dog named. This form can be used only on litter applications for litters sired by that dog. The form is valid for one year; a new form must be filed to extend authorization.

The form that must be completed by the current owner and the new owner when a registered or registerable dog changes hands more than once before being transferred or registered. This form is attached to the original registration certificate or application. Also called the gray form.