overshot drilling made in china

GAOTON Series 150 Releasing and Circulating Overshot is an external fishing tool for engage, pack off and retrieve tubular fish, especially for fishing drill collar and drill pipe. The grapple of the overshot can be designed for different sizes of fish, so one overshot can be dressed with different size of grapple components for fishing different sizes of fish.

GAOTON Series 150 Overshot consists of three outside parts: Top Sub, Bowl, and Standard Guide. The Basic Overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the Overshot, a Spiral Grapple, Spiral Grapple Control, and Type “A” Packer are used. If the fish diameter is considerably below maximum catch size (½” or more) a Basket Grapple and a Mill Control Packer are used.

Within those famous China oil and gas overshot manufacturers, GAOTON is a professional such supplier, producer and provider, welcome to wholesale petroleum and oilfield API overshot from our factory.

Wireline drill tools can lift drill core from drill rods without picking up bits. All the tools include principal parts of the drill tools, overshotassembly, drill rods, holding dog, circle wrench...

Wireline triple core barrel system consist of the same groups as the double tube core barrel but utilize a third tube help integral core recovery when drilling coal, clay bearing or highly...

A wide variety of overshot fishing tools options are available to you, such as swivel, fishing plier and spool.You can also choose from ocean boat fishing, lake and river overshot fishing tools,

The Q series overshot assembly is a kind of tool specially used to salvage and place inner tube assembly. At present, we have four kinds of Q series overshot assembly: BQB, NQB, HQB and PQB.

Its main components are salvage frame and salvage hook. Regarding those to be exported, the Q series overshot assembly will be packed by export-standard plywood boxes.

The HQ series overshot assembly is a kind of tool specially used to Lift out and place inner tube assembly. At present, we have four kinds of C-Q series overshot assembly: BQ, NQ and PQ.

Its main components are overshot body, lifting dog. Regarding those to be exported, the HQ series overshot assembly will be packed by export-standard plywood boxes.

As a professional manufacturer of HQ series overshot assembly in China, Wuxi Drlling Tools Factory still provide customers worldwide with China overshot assembly, hoisting plug, foot clamp, circle wrench, etc. All of our products have passed the certification of ISO9001: 2000 and API 5DP. With high quality and competitive price, our products have been well received by customers from Mongolia, Kazakhstan, Russia, Iran, Afghanistan, Oman, Turkey, Thailand, Vietnam, Myanmar, Malaysia, Indonesia, Singapore, Taiwan, Colombia, Mexico, Brazil, Canada, Australia, etc.

Q series Overshot AssemblyThe HQ series overshot assembly is a kind of tool specially used to lift out and place inner tube assembly. At present, we have four kinds of Q series ...

China Overshot AssemblyThe China overshot assembly is mainly used for pulling up inner tubesinside core tubes. And we offer various overshot assemblies for clients all over the world...

The China overshot assembly is mainly used for pulling up inner tubes inside core tubes. And we offer various overshot assemblies for clients all over the world, such as S56,S59, S59B, S75, S75B, S75-SF,S95, S95A , CBH, CNH and CNH(F) CSH overshot assembly.

We will pack the overshot assembly in accordance with customers" requirements. And for those to be exported, they will be packed by export-standard plywood boxes.

As a professional manufacturer of China overshot assembly in China, Wuxi Drlling Tools Factory still provide customers worldwide with hoisting plug, foot clamp, circle wrench, diamond circle wrench, etc. All of our products have passed the certification of ISO9001: 2000 and API 5DP. With high quality and competitive price, our products have been well received by customers from Mongolia, Kazakhstan, Russia, Iran, Afghanistan, Oman, Turkey, Thailand, Vietnam, Myanmar, Malaysia, Indonesia, Singapore, Taiwan, Colombia, Mexico, Brazil, Canada, Australia, etc. If you"re interested in our China overshot assembly, please contact us freely.

C-Q series Overshot AssemblyThe C-Q series overshot assembly is a kind of tool specially used to salvage and place inner tube assembly. At present, we have four kinds of C-Q series ...

China Overshot AssemblyThe China overshot assembly is mainly used for pulling up inner tubes inside core tubes. And we offer various overshot assemblies for clients all over the ...

Releasing and circulating overshot is an external fishing tool for engage, pack off and retrieve tublar fish, especially for fishing drill collar and drill pipe. The grapple of the overshot can be designed for different sizes of fish, so one overshot can be dressed wih different size of grapple components for fishing different sizes of fish.

The slip overshot is an unreleased tool designed to externally engage a fish .It not only can engage every kinds of oil tube, drill pipe, weight rod, long plumb but also can reverse the stuck pipe string by giving torque to the stuck pipe string

Our tungsten carbide products mainly include tungsten carbide cutting blades and tungsten carbide geological mining cutting tools. And these tungsten carbide tools are widely used in a wide range of fields, like cutting, geological drilling, petroleum, coal mining, and construction industry....

I debated on where to go next, but at the end of the day the most widely used fishing tool has to be an overshot. Some will say why not a spear? Well if you must ask, always go with the strongest fishing tool you can run to catch the fish. And if you run a spear, never plug the I.D. of your fish by breaking it off. Done with that!

The info that follows has been taken from the manuals published on overshots. I realize that paper manuals are a thing of the past, yes, yes at one time fishing tool hands carried massive catalog brief cases full of reference material. Now you have the luxury of your laptop loaded with information. If you have never sat down and read an overshot manual, now might be a good time.

The overshot is highly versatile and efficient tool. There are several different types of overshots, however each overshot is designed to engage a specific size of tubing, pipe, coupling, tool joint, drill collar or smooth OD tool.

The original overshot was developed by Bowen Oil Tools, which is now part of NOV. One thing I will point out is that in the catalogs you will see more than one assembly number for a given OD of Overshot, this came about due to the two locations developing their own variations. I found this information on NOV’s website and thought it was interesting to share.

In the early 1930s, the consequences of the stock market crash prompted S.R. Bowen to consider starting a company in Houston, where oil exploration and drilling was accelerating. In the early spring of 1934, his son Walter and a friend formed Bowen Company of Texas.

Bowen™ became a leader in innovation with the creation of the first overshot, the Series 150, in 1935. This tool set the standard for fishing equipment, and the quick acceptance of the tool assured the company partners that their business would be successful. The company continued to create new products, building a reputation for their well tool design and construction.

Currently there are several manufacturers of overshots, NOV (Bowen), Rubicon (Logan) and Applied Oil Tools (Gotco). These overshots are designated by a series number as follows:Series 10 - Sucker Rod Overshot

Overshots may be identified by one of the following, known as “type”:Full Strength (FS) - engineered to withstand all pulling, jarring and torsional strain

The basic overshot (from top down) consists of a top sub, a bowl, grapple, control, and a guide. In addition to the basic components, some overshots (Series 10 and 150) can be dressed with either a:Spiral grapple used if the fish diameter is near the maximum catch of the overshot, or a

The Series 150 Overshot features the ability to packoff on the fish. When the circulating packoff is not used, the fluid circulates down the drillpipe, aroundthe top outside of the fish, through the slip or grapple assembly, around the guide shoe and up the annulus.

When the circulating packoff is used, the annular space between the top outside of the fish and the inside of the lower part of the overshot is packed off, diverting the fluid flow down into the fish, making it easier to release and recover the fish. Packoffs usually are not high pressure devices but will often withstand sufficient pressure to establish circulation through the fish. Third party high pressure packoffs are available from various sources.

The extension can be installed between the top sub and the bowl of the Series 10, 70, and 150 overshots. It is used to extend the overshot bowl to:Allow the grapple to catch farther down on a fish that may be necked down at the top by having been pulled in two, or latched by an overshot and released several times, or to

A stop ring must be used where a fish OD reduces immediately below the catch area to allow the grapple to bite on full-size pipe.Example - catching a Hydril upset or EUE collar. If the upset of collar should pass completely through the grapple, the overshot may not be releasable.

The Series 10 Sucker Rod Overshot is designed to engage and recover sucker rods, couplings, and similar items from inside tubing strings.Basket grapples are recommended for fishing for hardened and ground boxes (Sucker Rod Box).

The Series 20 Sucker Rod Overshot is a short catch tool which provides a means for engaging the exposed portion of a fish too short to be engaged with a Series 10 overshot.Uses basket grapples only

The Series 70 Short Catch Overshot is designed to engage the exposed portion of a fish too short to engage with Series 150 overshots.Uses basket grapple only

The Series 150 Releasing and Circulating Overshot is used to engage, packoff, and retrieve twisted-off lost tubing, drillpipecoupling, tool joint, casing or other similar fish.

A right hand wicker grapple converts a normal right release overshot to left hand release. This grapple is used where you expect to apply excessive right hand torque to release a packer, safety joint, etc. Note: Overshot will have to be released by left hand rotation.

High Pressure Packoff Assemblies:The High Pressure Packoff Assembly is an accessory to the Series 150 Overshots. It is used when high pressure circulation to the fish is required. It consists of a packoff sub with packing and packing rings and is installed between the top sub and bowl of the overshot. By running the packoff sub above the bowl, this design prevents the application of high internal pressures to the overshot bowl. The design of the High Pressure Packoff Assembly allows pressures two to three times the standard overshot packoff to be applied to the fish.

This information comes directly from the NOV manual for the Wide Catch Overshot. This is probably the first and only change to this common tool I know of in my career.

The Wide Catch Overshot provides the strongest tool available to externally engage, pack-off, and pull a fish that has been significantly worn. This tool has similar rugged design features and construction as the industry standard, Bowen Series 150 overshot, with the ability to interchange the Bottom Guide with the full range of existing components used with the standard Bowen Series 150 overshot.

In service, the Wide Catch Overshot (WCOS) takes a positive grip over a large area of fish and is capable of withstanding heavy pulling, torsion, and jarring strains without damage to the tools or the fish.

The WCOS has been designed to significantly increase the catch range of the OD of the fish to be caught, compared to the standard overshot. This enables a greater opportunity for a successful fishing operation in a reduced number of trips, thus reducing overall intervention costs for the operator. In addition to the large catch range, the WCOS has the ability to seal across very large extrusion gaps at both standard and high pressure and provide full circulation through the fish, should it be required.

Connections between the Top Sub/Bowl and Extension Sub have been designed to create a seal. This will prevent the connection from washing out should the overshot be required to be flowed through for a long period of time. In order to lock the Top Sub/Extension Sub to the Bowl from backing off during operation, set screws have become standard and will gall the threads should the connection break free.

The operation of all overshots is identical. The exception being that the Series 150 carries a packoff which provides circulation through the fish. First, determine that the overshot is properly assembled and dressed with the proper size grapple. Make up the overshot on the fishing string (normally it is run connected to the bottom of the bumper sub) and run it into the well. As the top of the fish is reached make sure circulation has been established to clear overshot ID of any plugging. Lower the overshot onto the top of the fish with no rotation at first. A 5,000 pound set down weight will be sufficient to engage the grapple. While lowering the overshot over the top of the fish watch for pressure build up, shut off pumps if any pressure build up is noticed. Should any back pressure be noticed, release the back pressure to allow the grapple to engage the fish. By elevating the string it can be determined, if the grapple went over and engaged the fish. If unable to work overshot over top of fish without rotation, then slowly rotate the fishing string to the right and gradually lower the overshot over the fish. Combined rotation and lowering over top of the fish are important to keep the grapple in the release position. This provides the maximum clearance between the grapple and fish. While lowering the overshot over the top of the fish, watch for torque build up and an increase in pump pressure. A pump pressure build up indicates the overshot has gone over the top of the fish thereby reducing the flow area. Stop rotation (continued rotation could dull the wickers of the grapple) enabling the grapple to set. Allow the right hand torque to slack out of the string and then pull on the string by elevating the string to set the grapple.

To release from the fish, bump down, then simultaneously rotate to the right and slowly elevate the fishing string. It is best to have a clean fishing top before running the overshot.

Xi"an ZZ Top Oil Tools Co.,Ltd as a manufacturer of downhole tools established in 2007 for supplying drill stem testing(DST) tools which is annular pressure operated and full bore type,the factory own advanced facilities and trained workers,all technical persons involve in the DST tools over 10 years,from year of 2009, we started to producing some well surface testing equipment i.e flowhead(surface testing tree), floor manifold, Surface safety valve as well as oil&gas manifold,transfer pump and so on.Our tools and equipment are widely used in domestic and aboard including USA,UAE,Iran,Colombia, Brazil,India,Pakistan,Jordan,Saudi Arab,Indonesia,Singapore and so on.Xi"an ZZ Top Oil Tools Co.,Ltd as a distributor of large factories in China supplying drilling equipment, well head&well control equipment, Fishing Tools, Completion tools as well as heavy forgings. All supplied products are produced as per API latest version.Xi"an ZZ Top Oil Tools Co.,Ltd is focused on building long lasting business relationships with members of the petroleum industry through leadership, innovation and partnership, insist on Traceability and Serialization, each tool, equipment and spare parts can be traceable by part number, be responsible for any failure caused by quality problem.Xi"an ZZ Top Oil Tools Co.,Ltd would like to cooperate with any clients based on honest and serious business, ZZ Top will exceed your expectations.

Fishing tool is a special fishing drilling tool used to retrieve fallen objects from the borehole. At any stage of the operation, the drill rig operator will encounter unexpected situations, such as falling drill string, stuck pipe, missing drill bit, etc. The equipment that falls into the well is called "fish" or "trash", and the tools used to remove the equipment are called "fishing tools." Sometimes it may be necessary to use "fishing tools" to retrieve older wellbore equipment, such as packers, liners, tubing, or any stuck objects in the well. The drilling tools for fishing must be retrieved from the borehole in order to continue drilling operations.

Overshot is a very common fishing tool. The main fishing object is a smooth tube fish, which belongs to the external fishing type (i.e. catching the external surface of the fish).

Overshot is one of the necessary equipment for wireline drilling which could be put into the hole. This fishing tool is used to connect with the inner tube assembly and lift it up. Overshot is attached to drill rod and lowered over the pipe or stuck in the borehole. Hardened and self-cutting threads inside overshot firmly grasp the pipe, allowing the fish (such as inner tube and core) to be pulled from the hole.

5.The rotary overshot is a non-releasable tool and should normally be run below a safety joint in order to have positive release mechanism from the fish.

CDG’S overshot is an external catch fishing tool designed to catch the inner tube and core from the hole. Once the inner tube of a wireline core barrel is full of core sample, overshot is released from the top. Wireline overshot assembly slides inside the wireline drill rods and locks the spear head of core barrel. Along with inner tube, it is pulled out with steel wire rope.

China Drilling Geological Equipment Ltd. is a professional manufacturer of drilling tools. Main products cover impregnated synthetic diamond core bits, surface-set diamond bits, PDC core and noncoring bits, rod shoes & casing shoes, reaming shells, drill rods, core barrels, fishing tools (like overshots or wireline overshot assembly), water swivels, hoisting plugs, casing cutter assembly, adapter subs, wrenches, recovery tools and foot clamps. 80% of our products are sold abroad.

Product Description Our overshots are good quality ,specifications as follows:BQ,NQ,HQ,PQ,BTW,NTW,HTW,AQ,S75,S75A,S95,S95A Product show Company Information

Wuxi Shengmeirun Trading Co., Ltd. is a professional manufacturing enterprise of geological core drilling tools and drilling equipment,it has been in the industry for more than 10 years. Description BQ,NQ,HQ,PQ Quality

We also offer product sourcing and flight consolidation services. We"ve got our personal factory and sourcing office. We can easily present you with almost every style of merchandise linked to our merchandise range for Overshot Assembly , BQ Overshot Assembly , Nq Overshots Assembly , we sincerely invite ambitious individuals and corporations to hitch as an agent.

"Our personnel are generally in the spirit of ""continuous improvement and excellence"", and together with the outstanding top quality merchandise, favorable price tag and fantastic after-sales solutions, we try to gain every single customer"s rely on for Overshot Assembly , BQ Overshot Assembly , Nq Overshots Assembly , Honest to every customers are our requested! First-class serve best quality best price and fastest delivery date is our advantage! Give every customers good serve is our tenet! This makes our company get the favour of customers and support! Welcome all over the world customers send us enquiry and looking forward your good co-operation !Make sure you your inquiry for more details or request for dealership in selected regions.