overshot fishing assembly for sale

Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can"t be release from stucking, we should release the overshot and lifting the drill string.

We provide all kinds of fishing tools at various sizes. The fishing tools are produced and inspected strictly under API Spec 7, including Safety Joint, Fishing Magnet, Overshots, Releasing Spear, Fishing Jar (3 1/2" to 9 1/2" OD), Fishing Multifunction, Casing Spear, Taper Taps, Die Collars, Jar Intensifier(3 1/2" to 9 1/2" OD), Junk Sub, Hydraulic Junk Retriever, Mill Shoes, Reverse Circulating Junk Basket etc.

The Hunting Releasable Overshot is designed to engage tools that have damaged or have no fish necks. The Overshot is designed to withstand high impacts associated with fishing operations.

Hunting Releasable Overshots are available in all common industry toolstring sizes and are manufactured with either sucker rod or integral quick connections as per customer requirements

The Series 10 Sucker Rod Overshot is a small, rugged tool designed for engaging and retrieving sucker rods, couplings, and other items from inside tubing strings.

Series 20 Short Catch Sucker Rod Overshots are designed for conditions when sucker rods, couplings, and other portions of a fish are too short for retrieval with a standard overshot.

The Hydraulic Release Overshot was designed to aid in the recovery of a stuck fish in a horizontal drilling application where normal rotation for release is not obtainable.

The Series 150 Releasing and Circulating Overshot consists of three main external parts: a Top Sub, a Bowl, and a Guide. Internal catch and pack-off parts are determined by the diameter of the fish. Each assembly is designed for a maximum catch diameter.

A Series 160 Side Door Overshot is recommended when fishing for cable tools or conductor lines in cased holes. The side door overshot is run in on tubing or drill pipe.

Rotary Die Collars are the simplest external catch fishing tools designed for retrieving a fish from the hole. Die Collars are available in two types: Type A and Type B.

Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures positive engagement, easy release and re-engagement. It may be used with other equipment such as pack-off assemblies and internal cutters.

The Full Flow Reverse Circulation Junk Basket is similar to the Reverse Circulation Junk Basket. The unique difference is the Full Flow Valve Assembly that enables continuous circulation through the center thereby keeping out shale and debris while running in the hole.

The alternately long and short fingers of the junk catcher assembly extend almost to the center of the basket to form a close-fitting receptacle that will retain small pieces of junk that may impede drilling progress or hold a core sample.

The Fishing Magnet is designed to retrieve small metal, oddly shaped objects such as mill shavings, bit cones, cutters, bearings, slips, tong pins and hand tools for the bottom of the well bore.

The Magna Fish™ Fishing Magnet is designed to retrieve small metal, oddly–shaped objects such as milling shavings, bit cones, cuers, bearings, slips, long pins, and hand tools from the boom of the wellbore. Typically, these objects are the result of bit failures, and accumula!on of mill cuttings, or simply accidental droppings of unmillable objects.

The Superior Energizer is run in conjunction with a Superior Fishing Jar of the same size. Its function is to supply intensified impact during the jarring operation. Each size of Superior Energizer is designed to match a corresponding size of Superior Fishing Jar.

The Z Type Hydraulic Jar is used for light drilling, fishing, coring, reaming, testing, side tracking, and washover operations. This straight-pull jar combines the principles of mechanics and hydraulics in a simple to assemble, easy to operate design.

The Z Type Energizer is run in conjunction with a Z Type Fishing Jar of the same size. Its function is to supply intensified impact during the jarring operation. Each size of Z Type Energizer is designed to match a corresponding size of Z Type Fishing Jar.

The Surface Bumper Jar is installed in the drill string at the surface and is used whenever the downhole drilling, fishing, or washover running string becomes stuck and requires a heavy downward force to release it.

The Lubricated Fishing Bumper Sub is a dependable accessory that is suitable for all fishing operations, especially harsh, downhole applications and deep workover operations.

One of the most common tools used for any kind of fishing job is the bumper sub. The tool’s design allows full torque and unrestricted fluid circulation at all times.

The Drill Pipe Safety Joint is designed for the safe and dependable release from drilling, fishing, tubing, washover, or testing strings should they become stuck.

The Tubing Safety Joint is designed for the safe and dependable release from drilling, fishing, tubing, washover, or testing strings should they become stuck.

The Washover Safety Joint is designed for the safe and dependable release from drilling, fishing, tubing, washover, or testing strings should they become stuck.

The Type J Safety Joint provides a release option from tools such as taper taps or die collars that are normally non-releasable. It also provides a way to connect or disconnect fishing string and stuck fish.

Junk Mills are hard-faced with sintered tungsten carbide particles that mill away stuck fish that can not be retrieved with conventional fishing methods. These tools are highly resistant to impact and their super rates of penetration result in fewer round trips. Their maximum useful life is enhanced by their self-sharpening feature.

This easy-to-service, hydraulic motor-driven 120-Ton Power Swivel provides smooth shock-free torque. It is rated to support tensile pipe loads of 120 tons at zero rpm and 65 tons dynamic load at 100 rpm. The compact swivel head design weighs only 2,000 lbs and fits many drilling or workover masts. A 2-3/4-inch bore gooseneck and washpipe assembly allows circulation through the 2-11/16-inch I.D. stem while rotating or in static mode.

The hydraulic motor-driven 85-Ton Power Swivel provides smooth shock-free torque. The compact swivel head design fits most drilling or workover masts and weighs only 1,163 lbs. It is rated to support tensile pipe loads of 85 tons at zero rpm and 45 tons dynamic load at 100 rpm. A 2-1/4-inch bore gooseneck and washpipe assembly allows circulation through the 2-inch I.D. stem while rotating or in static mode.

The Series 150 Releasing and Circulating Overshot is an external catch fishing tool designed to retrieve tubular items from the well bore. It is rugged, economical, and easy to use. The Overshot comes with a wide range of available accessories. These fishing tools have proven to be the most versatile and reliable in the field.

The basic assembly consists of a top sub, bowl, and standard guide. The internal components are used to establish a secure grip on the fish to retrieve it easily.

The selection of these components is determined by the diameter of the fish to be retrieved. When the fish diameter approaches the maximum catch of the overshot, a spiral grapple is required. This must also be equipped with a spiral grapple control and type A packer. When the diameter is approximately 1/2 inch (or more) under the maximum catch of the overshot, a basket grapple is used. It must be assembled with either a basket grapple control or a mill control packer.

All of our fishing tools come with standard API threads. In our machine shop we can cut any thread or customizes a drilling tool solution for your needs. Our fishing tools range in size from3.5" OD - 24" OD

This drilling tool is an Over shot fishing tool. To construct this part it we manufacture in a similar fashion to the fishing spear. The over shot is precision CNC machined from hardened high alloy steel. And has a sharp internal thread profile. This fishing tool latches to the outside diameter of the broken down hole drilling tool. The hard sharpened threads are designed to latch and thread into the part.

The Fishing spear is a tapered down hole fishing tool that is designed to cut a thread into in inside bore of the rotary drilling tubular. Our manufacturing process specifies us to cut a sharp profile thread into case hardened 8620 high alloy steel. We do this in house with our CNC machine shop. This guarantees it will bit into the broken tubular.

A premium magnetic fishing tool that is also very inexpensive. It comes standard with a removable reaming bit which helps to stabilize it while down the hole. Our magnetic fishing tools pull over to 3501bs in testing, but we can design them to pull even more. Our fishing tools have open holes designed to allow the face of the tool to be flushed. This allows for good hole cleaning and helps insure random debris does not become magnetised and junk up the face of the tool. The magnetic fishing tool is designed to be used with none hibulars

Our hydraulic and mechanical jars are designed for releasing a stuck downhole tool by up-and-down impacts with static axial load (tension) and torque. Jars are included in drilling assemblies for sidetracking. We produce right and left hand fishing & drilling jarsas well as brand-new torsiconial jars purposed for releasing stuck tools by up-and-down torsional impacts.

When you can’t reliably engage your fish with drillpipe, rely on the reliability and flexibility of fishing internal and external engagement tools from Baker Hughes.

Externally engage, pack off, and pull a fish with our wide range of overshot tools. The first fishing choice when screwing into the fish is not an option, our overshot tools are simply designed but ruggedly built. Choose from options including:

Kelo socket overshots are proven to catch small-diameter workstrings and sucker rods inside casing as well as recover coiled tubing that has parted and remains in hole.

The t-dog, mouse-trap, and flipper-dog (TMF) overshot can be dressed in three different ways for different washover applications. Deploy the t-dog assembly option to washover and recover mud-stuck or sanded-up square-collared pipe in one trip. Use the mouse-trap assembly to catch sucker rods, integral joint tubing, or cables. And with the flipper-dog assembly, you can confidently catch a fish with different ODs.

Type B™ and Type D™ casing and tubing spears retrieve a full range of casing sizes. The design of these spears affords easy dressing for alternate casing sizes, simple field-dressing to change the release setting, and fast, effective release—all of which help improve the efficiency of your fishing operations.

Fishing tool is a special fishing drilling tool used to retrieve fallen objects from the borehole. At any stage of the operation, the drill rig operator will encounter unexpected situations, such as falling drill string, stuck pipe, missing drill bit, etc. The equipment that falls into the well is called "fish" or "trash", and the tools used to remove the equipment are called "fishing tools." Sometimes it may be necessary to use "fishing tools" to retrieve older wellbore equipment, such as packers, liners, tubing, or any stuck objects in the well. The drilling tools for fishing must be retrieved from the borehole in order to continue drilling operations.

Overshot is a very common fishing tool. The main fishing object is a smooth tube fish, which belongs to the external fishing type (i.e. catching the external surface of the fish).

Taper tap and die collar are common fishing tools for fishing the inner hole of the string. They are used for fishing the inner hole with holes such as tubing, drill pipe, casing milling pipe, packer, water distributor, etc. It is made of high-quality alloy steel and especially heats treated. It has the advantages of high strength, high toughness, and simple buckle making.