overshot grapple quotation

You are viewing Bowen or Logan Overshots for sale by Pickett Oilfield, LLC. We have an extensive range of good used or rebuilt Overshots along with the accessories. Call us for your fishing tool needs. For more information contact us by phone at sales@pickettoilfield.com.

PickettOilfield.com offers prospective buyers an extensive selection of quality new, used, and refurbished Oilfield Equipment at competitive prices, including Overshots.

Overshots are a tool used on the downhole process during the fishing operations. It engages the tube or tool on the outside surface. A Grapple or other piece of equipment that is similar attaches onto the overshot and grabs the fish.

Series 150 Overshot consists of three outside parts: Top Sub, Bowl, and Standard Guide. The Basic Overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the Overshot, a Spiral Grapple, Spiral Grapple Control, and Type “A” Packer are used. If the fish diameter is considerably below maximum catch size (1/2” or more) a Basket Grapple and a Mill Control Packer are used.

The internal catch mechanisms have two basic types:a basket grapple and a sprial grapple. of fish to be caught; 3: Size and type of top connection; 4: If size other than standard, please specify clearly, etc. Our Service Objective: People-O riented, Quality firstly and Best service.

The Coil Solutions Overshots are used to engage and pull a fish from the well bore. It uses a grapple to bite into the outside of the fish and releases by following through a predetermined rate to disengage the grapple. The tool comes with a range of grapples to accommodate various fish sizes.

Release of the grapple is activated by flowing through a predetermined amount. A pressure differential of 700 psi at the tool will initiate the release of the grapple.

The Flo-Release Overshot is operated by setting down weight to engage the fish. If the device cannot be recovered the Overshot can be released by setting down weight and increasing the coil flow rate to activate the core piston and allow the Overshot to disengage from the fish. Incrementally sized grapples can be selected to suit the outside diameter of the fish.

Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can"t be release from stucking, we should release the overshot and lifting the drill string.

The internal catch mechanisms are of two basic types: a basket grapple and a spiral grapple. According to different uses, it may be equipped with some accessories, such as extension sub, wall hook, enlarged guide, etc.

We provide all kinds of fishing tools at various sizes. The fishing tools are produced and inspected strictly under API Spec 7, including Safety Joint, Fishing Magnet, Overshots, Releasing Spear, Fishing Jar (3 1/2" to 9 1/2" OD), Fishing Multifunction, Casing Spear, Taper Taps, Die Collars, Jar Intensifier(3 1/2" to 9 1/2" OD), Junk Sub, Hydraulic Junk Retriever, Mill Shoes, Reverse Circulating Junk Basket etc.

The Access Downhole Hydraulic Releasing Overshot was specifically created for situations where releasing the overshot with rotation is not a possibility or outright impossible. Although this was the initial

When certain BHA components are necessary above the overshot, and any one of the components cannot pass a ball, the Hydraulic Releasing Overshot becomes the optimal choice, as it only requires a pressure increase and the occasional downward bump to release.

The main difference the hydraulic Releasing Overshot and standard overshots is that it does not accommodate spiral grapples, which reduces the catch range. However, the Hydraulic Release Overshot accommodates the same types of shoes and overshot accessories as mechanical release overshots.

Typical operating considerations for Hydraulic Overshots include but are not limited to, flushing between runs to remove any treatment fluid, debris, or wellbore fluids that may damage or corrode the seal surfaces in the piston. Disassemble the overshot, replace the screws retaining the grapple, and oil the piston area each run to insure proper operation.

External catch | Fishing  Tool Overshots | Overshots | Series 150 Overshots | Short Catch Overshots | Sucker Rod Overshots | Overshot Guides | Mill Guide | Hook wall guide | Overshot Extension | Grapple | Spiral Grapple | Basket Grapple | Box Tap | Die Collar Tap | Rotary Die Collar

Tango stocks an extensive range of external catch fishing tools. External Catch Fishing Tools engage the fish on its outer diameter. These tools help you recover equipment downhole by using a grapple or by threading directly to its outside surface. These tools include: